blob: 28800119524859a0807fffefcb2f49797962f729 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2003-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This interface file contains the interface to the Audio Video Control
* Transport Protocol (AVCTP).
*
******************************************************************************/
#ifndef AVCT_API_H
#define AVCT_API_H
#include "bt_types.h"
#include "bt_target.h"
/*****************************************************************************
** Constants
*****************************************************************************/
/* API function return value result codes. */
#define AVCT_SUCCESS 0 /* Function successful */
#define AVCT_NO_RESOURCES 1 /* Not enough resources */
#define AVCT_BAD_HANDLE 2 /* Bad handle */
#define AVCT_PID_IN_USE 3 /* PID already in use */
#define AVCT_NOT_OPEN 4 /* Connection not open */
/* PSM for AVCT. */
#define AVCT_PSM 0x0017
#define AVCT_BR_PSM 0x001B
/* Protocol revision numbers */
#define AVCT_REV_1_0 0x0100
#define AVCT_REV_1_2 0x0102
#define AVCT_REV_1_3 0x0103
/* the layer_specific settings */
#define AVCT_DATA_CTRL 0x0001 /* for the control channel */
#define AVCT_DATA_BROWSE 0x0002 /* for the browsing channel */
#define AVCT_DATA_PARTIAL 0x0100 /* Only have room for a partial message */
#define AVCT_MIN_CONTROL_MTU 48 /* Per the AVRC spec, minimum MTU for the control channel */
#define AVCT_MIN_BROWSE_MTU 335 /* Per the AVRC spec, minimum MTU for the browsing channel */
/* Message offset. The number of bytes needed by the protocol stack for the
** protocol headers of an AVCTP message packet.
*/
#define AVCT_MSG_OFFSET 15
#define AVCT_BROWSE_OFFSET 17 /* the default offset for browsing channel */
/* Connection role. */
#define AVCT_INT 0 /* Initiator connection */
#define AVCT_ACP 1 /* Acceptor connection */
/* Control role. */
#define AVCT_TARGET 1 /* target */
#define AVCT_CONTROL 2 /* controller */
#define AVCT_PASSIVE 4 /* If conflict, allow the other side to succeed */
/* Command/Response indicator. */
#define AVCT_CMD 0 /* Command message */
#define AVCT_RSP 2 /* Response message */
#define AVCT_REJ 3 /* Message rejected */
/* Control callback events. */
#define AVCT_CONNECT_CFM_EVT 0 /* Connection confirm */
#define AVCT_CONNECT_IND_EVT 1 /* Connection indication */
#define AVCT_DISCONNECT_CFM_EVT 2 /* Disconnect confirm */
#define AVCT_DISCONNECT_IND_EVT 3 /* Disconnect indication */
#define AVCT_CONG_IND_EVT 4 /* Congestion indication */
#define AVCT_UNCONG_IND_EVT 5 /* Uncongestion indication */
#define AVCT_BROWSE_CONN_CFM_EVT 6 /* Browse Connection confirm */
#define AVCT_BROWSE_CONN_IND_EVT 7 /* Browse Connection indication */
#define AVCT_BROWSE_DISCONN_CFM_EVT 8 /* Browse Disconnect confirm */
#define AVCT_BROWSE_DISCONN_IND_EVT 9 /* Browse Disconnect indication */
#define AVCT_BROWSE_CONG_IND_EVT 10 /* Congestion indication */
#define AVCT_BROWSE_UNCONG_IND_EVT 11 /* Uncongestion indication */
/* General purpose failure result code for callback events. */
#define AVCT_RESULT_FAIL 5
/*****************************************************************************
** Type Definitions
*****************************************************************************/
/* Control callback function. */
typedef void (tAVCT_CTRL_CBACK)(UINT8 handle, UINT8 event, UINT16 result,
BD_ADDR peer_addr);
/* Message callback function */
/* p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE */
typedef void (tAVCT_MSG_CBACK)(UINT8 handle, UINT8 label, UINT8 cr,
BT_HDR *p_pkt);
/* Structure used by AVCT_CreateConn. */
typedef struct {
tAVCT_CTRL_CBACK *p_ctrl_cback; /* Control callback */
tAVCT_MSG_CBACK *p_msg_cback; /* Message callback */
UINT16 pid; /* Profile ID */
UINT8 role; /* Initiator/acceptor role */
UINT8 control; /* Control role (Control/Target) */
} tAVCT_CC;
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function AVCT_Register
**
** Description This is the system level registration function for the
** AVCTP protocol. This function initializes AVCTP and
** prepares the protocol stack for its use. This function
** must be called once by the system or platform using AVCTP
** before the other functions of the API an be used.
**
**
** Returns void
**
*******************************************************************************/
AVCT_API extern void AVCT_Register(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask);
/*******************************************************************************
**
** Function AVCT_Deregister
**
** Description This function is called to deregister use AVCTP protocol.
** It is called when AVCTP is no longer being used by any
** application in the system. Before this function can be
** called, all connections must be removed with
** AVCT_RemoveConn().
**
**
** Returns void
**
*******************************************************************************/
AVCT_API extern void AVCT_Deregister(void);
/*******************************************************************************
**
** Function AVCT_CreateConn
**
** Description Create an AVCTP connection. There are two types of
** connections, initiator and acceptor, as determined by
** the p_cc->role parameter. When this function is called to
** create an initiator connection, an AVCTP connection to
** the peer device is initiated if one does not already exist.
** If an acceptor connection is created, the connection waits
** passively for an incoming AVCTP connection from a peer device.
**
**
** Returns AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_CreateConn(UINT8 *p_handle, tAVCT_CC *p_cc,
BD_ADDR peer_addr);
/*******************************************************************************
**
** Function AVCT_RemoveConn
**
** Description Remove an AVCTP connection. This function is called when
** the application is no longer using a connection. If this
** is the last connection to a peer the L2CAP channel for AVCTP
** will be closed.
**
**
** Returns AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_RemoveConn(UINT8 handle);
/*******************************************************************************
**
** Function AVCT_CreateBrowse
**
** Description Create an AVCTP connection. There are two types of
** connections, initiator and acceptor, as determined by
** the p_cc->role parameter. When this function is called to
** create an initiator connection, an AVCTP connection to
** the peer device is initiated if one does not already exist.
** If an acceptor connection is created, the connection waits
** passively for an incoming AVCTP connection from a peer device.
**
**
** Returns AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_CreateBrowse(UINT8 handle, UINT8 role);
/*******************************************************************************
**
** Function AVCT_RemoveBrowse
**
** Description Remove an AVCTP connection. This function is called when
** the application is no longer using a connection. If this
** is the last connection to a peer the L2CAP channel for AVCTP
** will be closed.
**
**
** Returns AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_RemoveBrowse(UINT8 handle);
/*******************************************************************************
**
** Function AVCT_GetBrowseMtu
**
** Description Get the peer_mtu for the AVCTP Browse channel of the given
** connection.
**
** Returns the peer browsing channel MTU.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_GetBrowseMtu (UINT8 handle);
/*******************************************************************************
**
** Function AVCT_GetPeerMtu
**
** Description Get the peer_mtu for the AVCTP channel of the given
** connection.
**
** Returns the peer MTU size.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_GetPeerMtu (UINT8 handle);
/*******************************************************************************
**
** Function AVCT_MsgReq
**
** Description Send an AVCTP message to a peer device. In calling
** AVCT_MsgReq(), the application should keep track of the
** congestion state of AVCTP as communicated with events
** AVCT_CONG_IND_EVT and AVCT_UNCONG_IND_EVT. If the
** application calls AVCT_MsgReq() when AVCTP is congested
** the message may be discarded. The application may make its
** first call to AVCT_MsgReq() after it receives an
** AVCT_CONNECT_CFM_EVT or AVCT_CONNECT_IND_EVT on control channel or
** AVCT_BROWSE_CONN_CFM_EVT or AVCT_BROWSE_CONN_IND_EVT on browsing channel.
**
** p_msg->layer_specific must be set to
** AVCT_DATA_CTRL for control channel traffic;
** AVCT_DATA_BROWSE for for browse channel traffic.
**
** Returns AVCT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
AVCT_API extern UINT16 AVCT_MsgReq(UINT8 handle, UINT8 label, UINT8 cr, BT_HDR *p_msg);
#ifdef __cplusplus
}
#endif
#endif /* AVCT_API_H */