blob: 5d335d945ba0c364fd90ec44a9789e17d8ec8718 [file] [log] [blame]
/*
* Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef ZYNQMP_DEF_H
#define ZYNQMP_DEF_H
#include <plat/common/common_def.h>
#define ZYNQMP_CONSOLE_ID_cadence 1
#define ZYNQMP_CONSOLE_ID_cadence0 1
#define ZYNQMP_CONSOLE_ID_cadence1 2
#define ZYNQMP_CONSOLE_ID_dcc 3
#define ZYNQMP_CONSOLE_IS(con) (ZYNQMP_CONSOLE_ID_ ## con == ZYNQMP_CONSOLE)
/* Firmware Image Package */
#define ZYNQMP_PRIMARY_CPU 0
/* Memory location options for Shared data and TSP in ZYNQMP */
#define ZYNQMP_IN_TRUSTED_SRAM 0
#define ZYNQMP_IN_TRUSTED_DRAM 1
/*******************************************************************************
* ZYNQMP memory map related constants
******************************************************************************/
/* Aggregate of all devices in the first GB */
#define DEVICE0_BASE U(0xFF000000)
#define DEVICE0_SIZE U(0x00E00000)
#define DEVICE1_BASE U(0xF9000000)
#define DEVICE1_SIZE U(0x00800000)
/* For cpu reset APU space here too 0xFE5F1000 CRF_APB*/
#define CRF_APB_BASE U(0xFD1A0000)
#define CRF_APB_SIZE U(0x00600000)
#define CRF_APB_CLK_BASE U(0xFD1A0020)
/* CRF registers and bitfields */
#define CRF_APB_RST_FPD_APU (CRF_APB_BASE + 0X00000104)
#define CRF_APB_RST_FPD_APU_ACPU_RESET (U(1) << 0)
#define CRF_APB_RST_FPD_APU_ACPU_PWRON_RESET (U(1) << 10)
/* CRL registers and bitfields */
#define CRL_APB_BASE U(0xFF5E0000)
#define CRL_APB_BOOT_MODE_USER (CRL_APB_BASE + 0x200)
#define CRL_APB_RESET_CTRL (CRL_APB_BASE + 0x218)
#define CRL_APB_RST_LPD_TOP (CRL_APB_BASE + 0x23C)
#define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + U(0x250))
#define CRL_APB_CLK_BASE U(0xFF5E0020)
#define CRL_APB_RPU_AMBA_RESET (U(1) << 2)
#define CRL_APB_RPLL_CTRL_BYPASS (U(1) << 3)
#define CRL_APB_RESET_CTRL_SOFT_RESET (U(1) << 4)
#define CRL_APB_BOOT_MODE_MASK (U(0xf) << 0)
#define CRL_APB_BOOT_PIN_MASK (U(0xf0f) << 0)
#define CRL_APB_BOOT_DRIVE_PIN_1_SHIFT U(9)
#define CRL_APB_BOOT_ENABLE_PIN_1_SHIFT U(1)
#define CRL_APB_BOOT_ENABLE_PIN_1 (U(0x1) << \
CRL_APB_BOOT_ENABLE_PIN_1_SHIFT)
#define CRL_APB_BOOT_DRIVE_PIN_1 (U(0x1) << \
CRL_APB_BOOT_DRIVE_PIN_1_SHIFT)
#define ZYNQMP_BOOTMODE_JTAG U(0)
#define ZYNQMP_ULPI_RESET_VAL_HIGH (CRL_APB_BOOT_ENABLE_PIN_1 | \
CRL_APB_BOOT_DRIVE_PIN_1)
#define ZYNQMP_ULPI_RESET_VAL_LOW CRL_APB_BOOT_ENABLE_PIN_1
/* system counter registers and bitfields */
#define IOU_SCNTRS_BASE 0xFF260000
#define IOU_SCNTRS_BASEFREQ (IOU_SCNTRS_BASE + 0x20)
/* APU registers and bitfields */
#define APU_BASE 0xFD5C0000
#define APU_CONFIG_0 (APU_BASE + 0x20)
#define APU_RVBAR_L_0 (APU_BASE + 0x40)
#define APU_RVBAR_H_0 (APU_BASE + 0x44)
#define APU_PWRCTL (APU_BASE + 0x90)
#define APU_CONFIG_0_VINITHI_SHIFT 8
#define APU_0_PWRCTL_CPUPWRDWNREQ_MASK 1
#define APU_1_PWRCTL_CPUPWRDWNREQ_MASK 2
#define APU_2_PWRCTL_CPUPWRDWNREQ_MASK 4
#define APU_3_PWRCTL_CPUPWRDWNREQ_MASK 8
/* PMU registers and bitfields */
#define PMU_GLOBAL_BASE 0xFFD80000
#define PMU_GLOBAL_CNTRL (PMU_GLOBAL_BASE + 0)
#define PMU_GLOBAL_GEN_STORAGE6 (PMU_GLOBAL_BASE + 0x48)
#define PMU_GLOBAL_REQ_PWRUP_STATUS (PMU_GLOBAL_BASE + 0x110)
#define PMU_GLOBAL_REQ_PWRUP_EN (PMU_GLOBAL_BASE + 0x118)
#define PMU_GLOBAL_REQ_PWRUP_DIS (PMU_GLOBAL_BASE + 0x11c)
#define PMU_GLOBAL_REQ_PWRUP_TRIG (PMU_GLOBAL_BASE + 0x120)
#define PMU_GLOBAL_CNTRL_FW_IS_PRESENT (1 << 4)
/*******************************************************************************
* CCI-400 related constants
******************************************************************************/
#define PLAT_ARM_CCI_BASE 0xFD6E0000
#define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX 3
#define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX 4
/*******************************************************************************
* GIC-400 & interrupt handling related constants
******************************************************************************/
#define BASE_GICD_BASE 0xF9010000
#define BASE_GICC_BASE 0xF9020000
#define BASE_GICH_BASE 0xF9040000
#define BASE_GICV_BASE 0xF9060000
#if ZYNQMP_WDT_RESTART
#define IRQ_SEC_IPI_APU 67
#define IRQ_TTC3_1 77
#define TTC3_BASE_ADDR 0xFF140000
#define TTC3_INTR_REGISTER_1 (TTC3_BASE_ADDR + 0x54)
#define TTC3_INTR_ENABLE_1 (TTC3_BASE_ADDR + 0x60)
#endif
#define ARM_IRQ_SEC_PHY_TIMER 29
#define ARM_IRQ_SEC_SGI_0 8
#define ARM_IRQ_SEC_SGI_1 9
#define ARM_IRQ_SEC_SGI_2 10
#define ARM_IRQ_SEC_SGI_3 11
#define ARM_IRQ_SEC_SGI_4 12
#define ARM_IRQ_SEC_SGI_5 13
#define ARM_IRQ_SEC_SGI_6 14
#define ARM_IRQ_SEC_SGI_7 15
#define MAX_INTR_EL3 128
/*******************************************************************************
* UART related constants
******************************************************************************/
#define ZYNQMP_UART0_BASE 0xFF000000
#define ZYNQMP_UART1_BASE 0xFF010000
#if ZYNQMP_CONSOLE_IS(cadence) || ZYNQMP_CONSOLE_IS(dcc)
# define ZYNQMP_UART_BASE ZYNQMP_UART0_BASE
#elif ZYNQMP_CONSOLE_IS(cadence1)
# define ZYNQMP_UART_BASE ZYNQMP_UART1_BASE
#else
# error "invalid ZYNQMP_CONSOLE"
#endif
#define ZYNQMP_CRASH_UART_BASE ZYNQMP_UART_BASE
/* impossible to call C routine how it is done now - hardcode any value */
#define ZYNQMP_CRASH_UART_CLK_IN_HZ 100000000 /* FIXME */
/* Must be non zero */
#define ZYNQMP_UART_BAUDRATE 115200
/* Silicon version detection */
#define ZYNQMP_SILICON_VER_MASK 0xF000
#define ZYNQMP_SILICON_VER_SHIFT 12
#define ZYNQMP_CSU_VERSION_SILICON 0
#define ZYNQMP_CSU_VERSION_QEMU 3
#define ZYNQMP_RTL_VER_MASK 0xFF0
#define ZYNQMP_RTL_VER_SHIFT 4
#define ZYNQMP_PS_VER_MASK 0xF
#define ZYNQMP_PS_VER_SHIFT 0
#define ZYNQMP_CSU_BASEADDR 0xFFCA0000
#define ZYNQMP_CSU_IDCODE_OFFSET 0x40
#define ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT 0
#define ZYNQMP_CSU_IDCODE_XILINX_ID_MASK (0xFFF << \
ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT)
#define ZYNQMP_CSU_IDCODE_XILINX_ID 0x093
#define ZYNQMP_CSU_IDCODE_SVD_SHIFT 12
#define ZYNQMP_CSU_IDCODE_SVD_MASK (0x7 << \
ZYNQMP_CSU_IDCODE_SVD_SHIFT)
#define ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT 15
#define ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK (0xF << \
ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT)
#define ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT 19
#define ZYNQMP_CSU_IDCODE_SUB_FAMILY_MASK (0x3 << \
ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT)
#define ZYNQMP_CSU_IDCODE_FAMILY_SHIFT 21
#define ZYNQMP_CSU_IDCODE_FAMILY_MASK (0x7F << \
ZYNQMP_CSU_IDCODE_FAMILY_SHIFT)
#define ZYNQMP_CSU_IDCODE_FAMILY 0x23
#define ZYNQMP_CSU_IDCODE_REVISION_SHIFT 28
#define ZYNQMP_CSU_IDCODE_REVISION_MASK (0xF << \
ZYNQMP_CSU_IDCODE_REVISION_SHIFT)
#define ZYNQMP_CSU_IDCODE_REVISION 0
#define ZYNQMP_CSU_VERSION_OFFSET 0x44
/* Efuse */
#define EFUSE_BASEADDR 0xFFCC0000
#define EFUSE_IPDISABLE_OFFSET 0x1018
#define EFUSE_IPDISABLE_VERSION 0x1FFU
#define ZYNQMP_EFUSE_IPDISABLE_SHIFT 20
/* Access control register defines */
#define ACTLR_EL3_L2ACTLR_BIT (1 << 6)
#define ACTLR_EL3_CPUACTLR_BIT (1 << 0)
#define FPD_SLCR_BASEADDR U(0xFD610000)
#define IOU_SLCR_BASEADDR U(0xFF180000)
#define ZYNQMP_RPU_GLBL_CNTL U(0xFF9A0000)
#define ZYNQMP_RPU0_CFG U(0xFF9A0100)
#define ZYNQMP_RPU1_CFG U(0xFF9A0200)
#define ZYNQMP_SLSPLIT_MASK U(0x08)
#define ZYNQMP_TCM_COMB_MASK U(0x40)
#define ZYNQMP_SLCLAMP_MASK U(0x10)
#define ZYNQMP_VINITHI_MASK U(0x04)
/* Tap delay bypass */
#define IOU_TAPDLY_BYPASS U(0XFF180390)
#define TAP_DELAY_MASK U(0x7)
/* SGMII mode */
#define IOU_GEM_CTRL U(0xFF180360)
#define IOU_GEM_CLK_CTRL U(0xFF180308)
#define SGMII_SD_MASK U(0x3)
#define SGMII_SD_OFFSET U(2)
#define SGMII_PCS_SD_0 U(0x0)
#define SGMII_PCS_SD_1 U(0x1)
#define SGMII_PCS_SD_PHY U(0x2)
#define GEM_SGMII_MASK U(0x4)
#define GEM_CLK_CTRL_MASK U(0xF)
#define GEM_CLK_CTRL_OFFSET U(5)
#define GEM_RX_SRC_SEL_GTR U(0x1)
#define GEM_SGMII_MODE U(0x4)
/* SD DLL reset */
#define ZYNQMP_SD_DLL_CTRL U(0xFF180358)
#define ZYNQMP_SD0_DLL_RST_MASK U(0x00000004)
#define ZYNQMP_SD0_DLL_RST U(0x00000004)
#define ZYNQMP_SD1_DLL_RST_MASK U(0x00040000)
#define ZYNQMP_SD1_DLL_RST U(0x00040000)
/* SD tap delay */
#define ZYNQMP_SD_DLL_CTRL U(0xFF180358)
#define ZYNQMP_SD_ITAP_DLY U(0xFF180314)
#define ZYNQMP_SD_OTAP_DLY U(0xFF180318)
#define ZYNQMP_SD_TAP_OFFSET U(16)
#define ZYNQMP_SD_ITAPCHGWIN_MASK U(0x200)
#define ZYNQMP_SD_ITAPCHGWIN U(0x200)
#define ZYNQMP_SD_ITAPDLYENA_MASK U(0x100)
#define ZYNQMP_SD_ITAPDLYENA U(0x100)
#define ZYNQMP_SD_ITAPDLYSEL_MASK U(0xFF)
#define ZYNQMP_SD_OTAPDLYSEL_MASK U(0x3F)
#define ZYNQMP_SD_OTAPDLYENA_MASK U(0x40)
#define ZYNQMP_SD_OTAPDLYENA U(0x40)
/* Clock control registers */
/* Full power domain clocks */
#define CRF_APB_APLL_CTRL (CRF_APB_CLK_BASE + 0x00)
#define CRF_APB_DPLL_CTRL (CRF_APB_CLK_BASE + 0x0c)
#define CRF_APB_VPLL_CTRL (CRF_APB_CLK_BASE + 0x18)
#define CRF_APB_PLL_STATUS (CRF_APB_CLK_BASE + 0x24)
#define CRF_APB_APLL_TO_LPD_CTRL (CRF_APB_CLK_BASE + 0x28)
#define CRF_APB_DPLL_TO_LPD_CTRL (CRF_APB_CLK_BASE + 0x2c)
#define CRF_APB_VPLL_TO_LPD_CTRL (CRF_APB_CLK_BASE + 0x30)
/* Peripheral clocks */
#define CRF_APB_ACPU_CTRL (CRF_APB_CLK_BASE + 0x40)
#define CRF_APB_DBG_TRACE_CTRL (CRF_APB_CLK_BASE + 0x44)
#define CRF_APB_DBG_FPD_CTRL (CRF_APB_CLK_BASE + 0x48)
#define CRF_APB_DP_VIDEO_REF_CTRL (CRF_APB_CLK_BASE + 0x50)
#define CRF_APB_DP_AUDIO_REF_CTRL (CRF_APB_CLK_BASE + 0x54)
#define CRF_APB_DP_STC_REF_CTRL (CRF_APB_CLK_BASE + 0x5c)
#define CRF_APB_DDR_CTRL (CRF_APB_CLK_BASE + 0x60)
#define CRF_APB_GPU_REF_CTRL (CRF_APB_CLK_BASE + 0x64)
#define CRF_APB_SATA_REF_CTRL (CRF_APB_CLK_BASE + 0x80)
#define CRF_APB_PCIE_REF_CTRL (CRF_APB_CLK_BASE + 0x94)
#define CRF_APB_GDMA_REF_CTRL (CRF_APB_CLK_BASE + 0x98)
#define CRF_APB_DPDMA_REF_CTRL (CRF_APB_CLK_BASE + 0x9c)
#define CRF_APB_TOPSW_MAIN_CTRL (CRF_APB_CLK_BASE + 0xa0)
#define CRF_APB_TOPSW_LSBUS_CTRL (CRF_APB_CLK_BASE + 0xa4)
#define CRF_APB_GTGREF0_REF_CTRL (CRF_APB_CLK_BASE + 0xa8)
#define CRF_APB_DBG_TSTMP_CTRL (CRF_APB_CLK_BASE + 0xd8)
/* Low power domain clocks */
#define CRL_APB_IOPLL_CTRL (CRL_APB_CLK_BASE + 0x00)
#define CRL_APB_RPLL_CTRL (CRL_APB_CLK_BASE + 0x10)
#define CRL_APB_PLL_STATUS (CRL_APB_CLK_BASE + 0x20)
#define CRL_APB_IOPLL_TO_FPD_CTRL (CRL_APB_CLK_BASE + 0x24)
#define CRL_APB_RPLL_TO_FPD_CTRL (CRL_APB_CLK_BASE + 0x28)
/* Peripheral clocks */
#define CRL_APB_USB3_DUAL_REF_CTRL (CRL_APB_CLK_BASE + 0x2c)
#define CRL_APB_GEM0_REF_CTRL (CRL_APB_CLK_BASE + 0x30)
#define CRL_APB_GEM1_REF_CTRL (CRL_APB_CLK_BASE + 0x34)
#define CRL_APB_GEM2_REF_CTRL (CRL_APB_CLK_BASE + 0x38)
#define CRL_APB_GEM3_REF_CTRL (CRL_APB_CLK_BASE + 0x3c)
#define CRL_APB_USB0_BUS_REF_CTRL (CRL_APB_CLK_BASE + 0x40)
#define CRL_APB_USB1_BUS_REF_CTRL (CRL_APB_CLK_BASE + 0x44)
#define CRL_APB_QSPI_REF_CTRL (CRL_APB_CLK_BASE + 0x48)
#define CRL_APB_SDIO0_REF_CTRL (CRL_APB_CLK_BASE + 0x4c)
#define CRL_APB_SDIO1_REF_CTRL (CRL_APB_CLK_BASE + 0x50)
#define CRL_APB_UART0_REF_CTRL (CRL_APB_CLK_BASE + 0x54)
#define CRL_APB_UART1_REF_CTRL (CRL_APB_CLK_BASE + 0x58)
#define CRL_APB_SPI0_REF_CTRL (CRL_APB_CLK_BASE + 0x5c)
#define CRL_APB_SPI1_REF_CTRL (CRL_APB_CLK_BASE + 0x60)
#define CRL_APB_CAN0_REF_CTRL (CRL_APB_CLK_BASE + 0x64)
#define CRL_APB_CAN1_REF_CTRL (CRL_APB_CLK_BASE + 0x68)
#define CRL_APB_CPU_R5_CTRL (CRL_APB_CLK_BASE + 0x70)
#define CRL_APB_IOU_SWITCH_CTRL (CRL_APB_CLK_BASE + 0x7c)
#define CRL_APB_CSU_PLL_CTRL (CRL_APB_CLK_BASE + 0x80)
#define CRL_APB_PCAP_CTRL (CRL_APB_CLK_BASE + 0x84)
#define CRL_APB_LPD_SWITCH_CTRL (CRL_APB_CLK_BASE + 0x88)
#define CRL_APB_LPD_LSBUS_CTRL (CRL_APB_CLK_BASE + 0x8c)
#define CRL_APB_DBG_LPD_CTRL (CRL_APB_CLK_BASE + 0x90)
#define CRL_APB_NAND_REF_CTRL (CRL_APB_CLK_BASE + 0x94)
#define CRL_APB_ADMA_REF_CTRL (CRL_APB_CLK_BASE + 0x98)
#define CRL_APB_PL0_REF_CTRL (CRL_APB_CLK_BASE + 0xa0)
#define CRL_APB_PL1_REF_CTRL (CRL_APB_CLK_BASE + 0xa4)
#define CRL_APB_PL2_REF_CTRL (CRL_APB_CLK_BASE + 0xa8)
#define CRL_APB_PL3_REF_CTRL (CRL_APB_CLK_BASE + 0xac)
#define CRL_APB_PL0_THR_CNT (CRL_APB_CLK_BASE + 0xb4)
#define CRL_APB_PL1_THR_CNT (CRL_APB_CLK_BASE + 0xbc)
#define CRL_APB_PL2_THR_CNT (CRL_APB_CLK_BASE + 0xc4)
#define CRL_APB_PL3_THR_CNT (CRL_APB_CLK_BASE + 0xdc)
#define CRL_APB_GEM_TSU_REF_CTRL (CRL_APB_CLK_BASE + 0xe0)
#define CRL_APB_DLL_REF_CTRL (CRL_APB_CLK_BASE + 0xe4)
#define CRL_APB_AMS_REF_CTRL (CRL_APB_CLK_BASE + 0xe8)
#define CRL_APB_I2C0_REF_CTRL (CRL_APB_CLK_BASE + 0x100)
#define CRL_APB_I2C1_REF_CTRL (CRL_APB_CLK_BASE + 0x104)
#define CRL_APB_TIMESTAMP_REF_CTRL (CRL_APB_CLK_BASE + 0x108)
#define IOU_SLCR_GEM_CLK_CTRL (IOU_SLCR_BASEADDR + 0x308)
#define IOU_SLCR_CAN_MIO_CTRL (IOU_SLCR_BASEADDR + 0x304)
#define FPD_SLCR_WDT_CLK_SEL (FPD_SLCR_BASEADDR + 0x100)
#define IOU_SLCR_WDT_CLK_SEL (IOU_SLCR_BASEADDR + 0x300)
/* Global general storage register base address */
#define GGS_BASEADDR (0xFFD80030U)
#define GGS_NUM_REGS U(4)
/* Persistent global general storage register base address */
#define PGGS_BASEADDR (0xFFD80050U)
#define PGGS_NUM_REGS U(4)
/* Warm restart boot health status register and mask */
#define PM_BOOT_HEALTH_STATUS_REG (GGS_BASEADDR + U(0x10))
#define PM_BOOT_HEALTH_STATUS_MASK U(0x01)
/*AFI registers */
#define AFIFM6_WRCTRL U(13)
#define FABRIC_WIDTH U(3)
#endif /* ZYNQMP_DEF_H */