blob: 8ac07418ae77a22de910e194696c557e2b1ab84e [file] [log] [blame]
Arm Versatile Express
=====================
Versatile Express (VE) family development platform provides an ultra fast
environment for prototyping Armv7 System-on-Chip designs. VE Fixed Virtual
Platforms (FVP) are simulations of Versatile Express boards. The platform in
Trusted Firmware-A has been verified with Arm Cortex-A5 and Cortex-A7 VE FVP's.
This platform is tested on and only expected to work with single core models.
Boot Sequence
-------------
BL1 --> BL2 --> BL32(sp_min) --> BL33(u-boot) --> Linux kernel
How to build
------------
Code Locations
~~~~~~~~~~~~~~
- `U-boot <https://git.linaro.org/landing-teams/working/arm/u-boot.git>`__
- `Trusted Firmware-A <https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git>`__
Build Procedure
~~~~~~~~~~~~~~~
- Obtain arm toolchain. The software stack has been verified with linaro 6.2
`arm-linux-gnueabihf <https://releases.linaro.org/components/toolchain/binaries/6.2-2016.11/arm-linux-gnueabihf/>`__.
Set the CROSS_COMPILE environment variable to point to the toolchain folder.
- Fetch and build u-boot.
Make the .config file using the command:
.. code:: shell
make ARCH=arm vexpress_aemv8a_aarch32_config
Make the u-boot binary for Cortex-A5 using the command:
.. code:: shell
make ARCH=arm SUPPORT_ARCH_TIMER=no
Make the u-boot binary for Cortex-A7 using the command:
.. code:: shell
make ARCH=arm
- Build TF-A:
The make command for Cortex-A5 is:
.. code:: shell
make PLAT=fvp_ve ARCH=aarch32 ARM_ARCH_MAJOR=7 ARM_CORTEX_A5=yes \
AARCH32_SP=sp_min FVP_HW_CONFIG_DTS=fdts/fvp-ve-Cortex-A5x1.dts \
ARM_XLAT_TABLES_LIB_V1=1 BL33=<path_to_u-boot.bin> all fip
The make command for Cortex-A7 is:
.. code:: shell
make PLAT=fvp_ve ARCH=aarch32 ARM_ARCH_MAJOR=7 ARM_CORTEX_A7=yes \
AARCH32_SP=sp_min FVP_HW_CONFIG_DTS=fdts/fvp-ve-Cortex-A7x1.dts \
BL33=<path_to_u-boot.bin> all fip
Run Procedure
~~~~~~~~~~~~~
The following model parameters should be used to boot Linux using the build of
Trusted Firmware-A made using the above make commands:
.. code:: shell
./<path_to_model> <path_to_bl1.elf> \
-C motherboard.flashloader1.fname=<path_to_fip.bin> \
--data cluster.cpu0=<path_to_zImage>@0x80080000 \
--data cluster.cpu0=<path_to_ramdisk>@0x84000000
--------------
*Copyright (c) 2019, Arm Limited. All rights reserved.*