blob: 7d95e482713964934596ffd0fef73c416ec25dd3 [file] [log] [blame]
#
# Copyright (C) 2018-2021 Marvell International Ltd.
#
# SPDX-License-Identifier: BSD-3-Clause
# https://spdx.org/licenses
#
MARVELL_PLAT_BASE := plat/marvell/armada
MARVELL_PLAT_INCLUDE_BASE := include/plat/marvell/armada
PLAT_FAMILY := a3k
PLAT_FAMILY_BASE := $(MARVELL_PLAT_BASE)/$(PLAT_FAMILY)
PLAT_INCLUDE_BASE := $(MARVELL_PLAT_INCLUDE_BASE)/$(PLAT_FAMILY)
PLAT_COMMON_BASE := $(PLAT_FAMILY_BASE)/common
MARVELL_DRV_BASE := drivers/marvell
MARVELL_COMMON_BASE := $(MARVELL_PLAT_BASE)/common
HANDLE_EA_EL3_FIRST := 1
include plat/marvell/marvell.mk
#*********** A3700 *************
# GICV3
$(eval $(call add_define,CONFIG_GICV3))
# CCI-400
$(eval $(call add_define,USE_CCI))
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
MARVELL_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c
PLAT_INCLUDES := -I$(PLAT_FAMILY_BASE)/$(PLAT) \
-I$(PLAT_COMMON_BASE)/include \
-I$(PLAT_INCLUDE_BASE)/common \
-I$(MARVELL_DRV_BASE) \
-I$/drivers/arm/gic/common/
PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a3700_common.c \
$(PLAT_COMMON_BASE)/aarch64/a3700_clock.S \
$(MARVELL_DRV_BASE)/uart/a3700_console.S
BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
lib/cpus/aarch64/cortex_a53.S
MARVELL_DRV := $(MARVELL_DRV_BASE)/comphy/phy-comphy-3700.c
BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \
$(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
$(PLAT_COMMON_BASE)/plat_cci.c \
$(PLAT_COMMON_BASE)/plat_pm.c \
$(PLAT_COMMON_BASE)/dram_win.c \
$(PLAT_COMMON_BASE)/io_addr_dec.c \
$(PLAT_COMMON_BASE)/marvell_plat_config.c \
$(PLAT_COMMON_BASE)/a3700_ea.c \
$(PLAT_FAMILY_BASE)/$(PLAT)/plat_bl31_setup.c \
$(MARVELL_COMMON_BASE)/marvell_cci.c \
$(MARVELL_COMMON_BASE)/marvell_ddr_info.c \
$(MARVELL_COMMON_BASE)/marvell_gicv3.c \
$(MARVELL_GIC_SOURCES) \
drivers/arm/cci/cci.c \
$(PLAT_COMMON_BASE)/a3700_sip_svc.c \
$(MARVELL_DRV)
ifeq ($(CM3_SYSTEM_RESET),1)
BL31_SOURCES += $(PLAT_COMMON_BASE)/cm3_system_reset.c
endif
ifeq ($(A3720_DB_PM_WAKEUP_SRC),1)
BL31_SOURCES += $(PLAT_FAMILY_BASE)/$(PLAT)/board/pm_src.c
endif
ifdef WTP
$(if $(wildcard $(value WTP)/*),,$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' directory does not exist"))
$(if $(shell test -s "$(value WTP)/branch.txt" || git -C $(value WTP) rev-parse --show-cdup 2>&1),$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' does not contain valid Marvell a3700_utils release tarball nor git repository"))
DOIMAGEPATH := $(WTP)
DOIMAGETOOL := $(DOIMAGEPATH)/wtptp/src/TBB_Linux/release/TBB_linux
BUILD_UART := uart-images
UART_IMAGE := $(BUILD_UART).tgz.bin
ifeq ($(MARVELL_SECURE_BOOT),1)
DOIMAGE_CFG := $(BUILD_PLAT)/atf-tim.txt
DOIMAGEUART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-tim.txt
IMAGESPATH := $(DOIMAGEPATH)/tim/trusted
TIMNCFG := $(BUILD_PLAT)/atf-timN.txt
TIMNUARTCFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-timN.txt
TIMNSIG := $(IMAGESPATH)/timnsign.txt
TIM2IMGARGS := -i $(DOIMAGE_CFG) -n $(TIMNCFG)
TIMN_IMAGE := $$(grep "Image Filename:" -m 1 $(TIMNCFG) | cut -c 17-)
else #MARVELL_SECURE_BOOT
DOIMAGE_CFG := $(BUILD_PLAT)/atf-ntim.txt
DOIMAGEUART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-ntim.txt
IMAGESPATH := $(DOIMAGEPATH)/tim/untrusted
TIM2IMGARGS := -i $(DOIMAGE_CFG)
endif #MARVELL_SECURE_BOOT
TIMBUILD := $(DOIMAGEPATH)/script/buildtim.sh
TIM2IMG := $(DOIMAGEPATH)/script/tim2img.pl
TIMDDRTOOL := $(DOIMAGEPATH)/tim/ddr/ddr_tool
$(TIMBUILD): $(TIMDDRTOOL)
# WTMI_IMG is used to specify the customized RTOS image running over
# Service CPU (CM3 processor). By the default, it points to a
# baremetal binary of fuse programming in A3700_utils.
WTMI_IMG := $(DOIMAGEPATH)/wtmi/fuse/build/fuse.bin
# WTMI_MULTI_IMG is composed of CM3 RTOS image (WTMI_IMG)
# and sys-init image.
WTMI_MULTI_IMG := $(DOIMAGEPATH)/wtmi/build/wtmi.bin
WTMI_ENC_IMG := wtmi-enc.bin
SRCPATH := $(dir $(BL33))
CLOCKSPRESET ?= CPU_800_DDR_800
DDR_TOPOLOGY ?= 0
BOOTDEV ?= SPINOR
PARTNUM ?= 0
TIM_IMAGE := $$(grep "Image Filename:" -m 1 $(DOIMAGE_CFG) | cut -c 17-)
TIMBLDARGS := $(MARVELL_SECURE_BOOT) $(BOOTDEV) $(IMAGESPATH) $(DOIMAGEPATH) $(CLOCKSPRESET) \
$(DDR_TOPOLOGY) $(PARTNUM) $(DEBUG) $(DOIMAGE_CFG) $(TIMNCFG) $(TIMNSIG) 1
TIMBLDUARTARGS := $(MARVELL_SECURE_BOOT) UART $(IMAGESPATH) $(DOIMAGEPATH) $(CLOCKSPRESET) \
$(DDR_TOPOLOGY) 0 0 $(DOIMAGEUART_CFG) $(TIMNUARTCFG) $(TIMNSIG) 0
CRYPTOPP_LIBDIR ?= $(CRYPTOPP_PATH)
CRYPTOPP_INCDIR ?= $(CRYPTOPP_PATH)
$(DOIMAGETOOL): FORCE
$(if $(CRYPTOPP_LIBDIR),,$(error "Platform '$(PLAT)' for WTP image tool requires CRYPTOPP_PATH or CRYPTOPP_LIBDIR. Please set CRYPTOPP_PATH or CRYPTOPP_LIBDIR to point to the right directory"))
$(if $(CRYPTOPP_INCDIR),,$(error "Platform '$(PLAT)' for WTP image tool requires CRYPTOPP_PATH or CRYPTOPP_INCDIR. Please set CRYPTOPP_PATH or CRYPTOPP_INCDIR to point to the right directory"))
$(if $(wildcard $(CRYPTOPP_LIBDIR)/*),,$(error "Either 'CRYPTOPP_PATH' or 'CRYPTOPP_LIB' was set to '$(CRYPTOPP_LIBDIR)', but '$(CRYPTOPP_LIBDIR)' does not exist"))
$(if $(wildcard $(CRYPTOPP_INCDIR)/*),,$(error "Either 'CRYPTOPP_PATH' or 'CRYPTOPP_INCDIR' was set to '$(CRYPTOPP_INCDIR)', but '$(CRYPTOPP_INCDIR)' does not exist"))
ifdef CRYPTOPP_PATH
$(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile
endif
$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH)/wtptp/src/TBB_Linux -f TBB_linux.mak LIBDIR=$(CRYPTOPP_LIBDIR) INCDIR=$(CRYPTOPP_INCDIR)
$(WTMI_MULTI_IMG): FORCE
$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH) WTMI_IMG=$(WTMI_IMG) DDR_TOPOLOGY=$(DDR_TOPOLOGY) CLOCKSPRESET=$(CLOCKSPRESET) WTMI
$(BUILD_PLAT)/wtmi.bin: $(WTMI_MULTI_IMG)
$(Q)cp -a $(WTMI_MULTI_IMG) $(BUILD_PLAT)/wtmi.bin
$(TIMDDRTOOL): FORCE
$(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for ddr tool requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory"))
$(if $(wildcard $(value MV_DDR_PATH)/*),,$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' directory does not exist"))
$(if $(shell test -s "$(value MV_DDR_PATH)/branch.txt" || git -C $(value MV_DDR_PATH) rev-parse --show-cdup 2>&1),$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' does not contain valid Marvell mv_ddr release tarball nor git repository"))
$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH) MV_DDR_PATH=$(MV_DDR_PATH) DDR_TOPOLOGY=$(DDR_TOPOLOGY) mv_ddr
$(BUILD_PLAT)/$(UART_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(DOIMAGETOOL) $(TIMBUILD) $(TIMDDRTOOL)
@$(ECHO_BLANK_LINE)
@echo "Building uart images"
$(Q)mkdir -p $(BUILD_PLAT)/$(BUILD_UART)
$(Q)cp -a $(BUILD_PLAT)/wtmi.bin $(BUILD_PLAT)/$(BUILD_UART)/wtmi.bin
$(Q)cp -a $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/$(BUILD_UART)/$(BOOT_IMAGE)
$(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TIMBUILD) $(TIMBLDUARTARGS)
$(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(DOIMAGEUART_CFG)
$(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(DOIMAGEUART_CFG)
ifeq ($(MARVELL_SECURE_BOOT),1)
$(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIMNUARTCFG)
$(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIMNUARTCFG)
endif
$(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(DOIMAGETOOL) -r $(DOIMAGEUART_CFG) -v -D
ifeq ($(MARVELL_SECURE_BOOT),1)
$(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(DOIMAGETOOL) -r $(TIMNUARTCFG)
endif
$(Q)tar czf $(BUILD_PLAT)/$(UART_IMAGE) -C $(BUILD_PLAT) $(BUILD_UART)/$(TIM_IMAGE) $(BUILD_UART)/wtmi_h.bin $(BUILD_UART)/boot-image_h.bin
@$(ECHO_BLANK_LINE)
@echo "Built $@ successfully"
@$(ECHO_BLANK_LINE)
$(BUILD_PLAT)/$(FLASH_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(DOIMAGETOOL) $(TIMBUILD) $(TIMDDRTOOL) $(TIM2IMG)
@$(ECHO_BLANK_LINE)
@echo "Building flash image"
$(Q)cd $(BUILD_PLAT) && $(TIMBUILD) $(TIMBLDARGS)
$(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(DOIMAGE_CFG)
$(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(DOIMAGE_CFG)
ifeq ($(MARVELL_SECURE_BOOT),1)
$(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIMNCFG)
$(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIMNCFG)
@$(ECHO_BLANK_LINE)
@echo "=======================================================";
@echo " Secure boot. Encrypting wtmi and boot-image";
@echo "=======================================================";
@$(ECHO_BLANK_LINE)
$(Q)cp $(BUILD_PLAT)/wtmi.bin $(BUILD_PLAT)/wtmi-align.bin
$(Q)truncate -s %16 $(BUILD_PLAT)/wtmi-align.bin
$(Q)openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/wtmi-align.bin \
-out $(BUILD_PLAT)/$(WTMI_ENC_IMG) \
-K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \
-iv `cat $(IMAGESPATH)/iv.txt` -p
$(Q)truncate -s %16 $(BUILD_PLAT)/$(BOOT_IMAGE);
$(Q)openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/$(BOOT_IMAGE) \
-out $(BUILD_PLAT)/$(BOOT_ENC_IMAGE) \
-K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \
-iv `cat $(IMAGESPATH)/iv.txt` -p
endif
$(Q)cd $(BUILD_PLAT) && $(DOIMAGETOOL) -r $(DOIMAGE_CFG) -v -D
ifeq ($(MARVELL_SECURE_BOOT),1)
$(Q)cd $(BUILD_PLAT) && $(DOIMAGETOOL) -r $(TIMNCFG)
$(Q)sed -i 's|wtmi.bin|$(WTMI_ENC_IMG)|1' $(TIMNCFG)
$(Q)sed -i 's|$(BOOT_IMAGE)|$(BOOT_ENC_IMAGE)|1' $(TIMNCFG)
endif
$(Q)cd $(BUILD_PLAT) && $(TIM2IMG) $(TIM2IMGARGS) -o $(BUILD_PLAT)/$(FLASH_IMAGE)
@$(ECHO_BLANK_LINE)
@echo "Built $@ successfully"
@$(ECHO_BLANK_LINE)
clean realclean distclean: mrvl_clean
.PHONY: mrvl_clean
mrvl_clean:
-$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH) MV_DDR_PATH=$(MV_DDR_PATH) clean
-$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH)/wtptp/src/TBB_Linux -f TBB_linux.mak clean
ifdef CRYPTOPP_PATH
-$(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile clean
endif
else # WTP
$(BUILD_PLAT)/$(UART_IMAGE) $(BUILD_PLAT)/$(FLASH_IMAGE):
$(error "Platform '${PLAT}' for target '$@' requires WTP. Please set WTP to point to the right directory")
endif # WTP
.PHONY: mrvl_uart
mrvl_uart: $(BUILD_PLAT)/$(UART_IMAGE)