| |
| /* ----------------------------------------------------------------------------------------------------------- |
| Software License for The Fraunhofer FDK AAC Codec Library for Android |
| |
| © Copyright 1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. |
| All rights reserved. |
| |
| 1. INTRODUCTION |
| The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements |
| the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. |
| This FDK AAC Codec software is intended to be used on a wide variety of Android devices. |
| |
| AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual |
| audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by |
| independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part |
| of the MPEG specifications. |
| |
| Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) |
| may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners |
| individually for the purpose of encoding or decoding bit streams in products that are compliant with |
| the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license |
| these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec |
| software may already be covered under those patent licenses when it is used for those licensed purposes only. |
| |
| Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, |
| are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional |
| applications information and documentation. |
| |
| 2. COPYRIGHT LICENSE |
| |
| Redistribution and use in source and binary forms, with or without modification, are permitted without |
| payment of copyright license fees provided that you satisfy the following conditions: |
| |
| You must retain the complete text of this software license in redistributions of the FDK AAC Codec or |
| your modifications thereto in source code form. |
| |
| You must retain the complete text of this software license in the documentation and/or other materials |
| provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. |
| You must make available free of charge copies of the complete source code of the FDK AAC Codec and your |
| modifications thereto to recipients of copies in binary form. |
| |
| The name of Fraunhofer may not be used to endorse or promote products derived from this library without |
| prior written permission. |
| |
| You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec |
| software or your modifications thereto. |
| |
| Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software |
| and the date of any change. For modified versions of the FDK AAC Codec, the term |
| "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term |
| "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." |
| |
| 3. NO PATENT LICENSE |
| |
| NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, |
| ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with |
| respect to this software. |
| |
| You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized |
| by appropriate patent licenses. |
| |
| 4. DISCLAIMER |
| |
| This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors |
| "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties |
| of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
| CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, |
| including but not limited to procurement of substitute goods or services; loss of use, data, or profits, |
| or business interruption, however caused and on any theory of liability, whether in contract, strict |
| liability, or tort (including negligence), arising in any way out of the use of this software, even if |
| advised of the possibility of such damage. |
| |
| 5. CONTACT INFORMATION |
| |
| Fraunhofer Institute for Integrated Circuits IIS |
| Attention: Audio and Multimedia Departments - FDK AAC LL |
| Am Wolfsmantel 33 |
| 91058 Erlangen, Germany |
| |
| www.iis.fraunhofer.de/amm |
| amm-info@iis.fraunhofer.de |
| ----------------------------------------------------------------------------------------------------------- */ |
| |
| #include "nf_est.h" |
| |
| #include "sbr_misc.h" |
| |
| #include "genericStds.h" |
| |
| /* smoothFilter[4] = {0.05857864376269f, 0.2f, 0.34142135623731f, 0.4f}; */ |
| static const FIXP_DBL smoothFilter[4] = { 0x077f813d, 0x19999995, 0x2bb3b1f5, 0x33333335 }; |
| |
| /* static const INT smoothFilterLength = 4; */ |
| |
| static const FIXP_DBL QuantOffset = (INT)0xfc000000; /* ld64(0.25) */ |
| |
| #ifndef min |
| #define min(a,b) ( a < b ? a:b) |
| #endif |
| |
| #ifndef max |
| #define max(a,b) ( a > b ? a:b) |
| #endif |
| |
| #define NOISE_FLOOR_OFFSET_SCALING (4) |
| |
| |
| |
| /**************************************************************************/ |
| /*! |
| \brief The function applies smoothing to the noise levels. |
| |
| |
| |
| \return none |
| |
| */ |
| /**************************************************************************/ |
| static void |
| smoothingOfNoiseLevels(FIXP_DBL *NoiseLevels, /*!< pointer to noise-floor levels.*/ |
| INT nEnvelopes, /*!< Number of noise floor envelopes.*/ |
| INT noNoiseBands, /*!< Number of noise bands for every noise floor envelope. */ |
| FIXP_DBL prevNoiseLevels[NF_SMOOTHING_LENGTH][MAX_NUM_NOISE_VALUES],/*!< Previous noise floor envelopes. */ |
| const FIXP_DBL *smoothFilter, /*!< filter used for smoothing the noise floor levels. */ |
| INT transientFlag) /*!< flag indicating if a transient is present*/ |
| |
| { |
| INT i,band,env; |
| FIXP_DBL accu; |
| |
| for(env = 0; env < nEnvelopes; env++){ |
| if(transientFlag){ |
| for (i = 0; i < NF_SMOOTHING_LENGTH; i++){ |
| FDKmemcpy(prevNoiseLevels[i],NoiseLevels+env*noNoiseBands,noNoiseBands*sizeof(FIXP_DBL)); |
| } |
| } |
| else { |
| for (i = 1; i < NF_SMOOTHING_LENGTH; i++){ |
| FDKmemcpy(prevNoiseLevels[i - 1],prevNoiseLevels[i],noNoiseBands*sizeof(FIXP_DBL)); |
| } |
| FDKmemcpy(prevNoiseLevels[NF_SMOOTHING_LENGTH - 1],NoiseLevels+env*noNoiseBands,noNoiseBands*sizeof(FIXP_DBL)); |
| } |
| |
| for (band = 0; band < noNoiseBands; band++){ |
| accu = FL2FXCONST_DBL(0.0f); |
| for (i = 0; i < NF_SMOOTHING_LENGTH; i++){ |
| accu += fMultDiv2(smoothFilter[i], prevNoiseLevels[i][band]); |
| } |
| FDK_ASSERT( (band + env*noNoiseBands) < MAX_NUM_NOISE_VALUES); |
| NoiseLevels[band+ env*noNoiseBands] = accu<<1; |
| } |
| } |
| } |
| |
| /**************************************************************************/ |
| /*! |
| \brief Does the noise floor level estiamtion. |
| |
| The noiseLevel samples are scaled by the factor 0.25 |
| |
| \return none |
| |
| */ |
| /**************************************************************************/ |
| static void |
| qmfBasedNoiseFloorDetection(FIXP_DBL *noiseLevel, /*!< Pointer to vector to store the noise levels in.*/ |
| FIXP_DBL ** quotaMatrixOrig, /*!< Matrix holding the quota values of the original. */ |
| SCHAR *indexVector, /*!< Index vector to obtain the patched data. */ |
| INT startIndex, /*!< Start index. */ |
| INT stopIndex, /*!< Stop index. */ |
| INT startChannel, /*!< Start channel of the current noise floor band.*/ |
| INT stopChannel, /*!< Stop channel of the current noise floor band. */ |
| FIXP_DBL ana_max_level, /*!< Maximum level of the adaptive noise.*/ |
| FIXP_DBL noiseFloorOffset, /*!< Noise floor offset. */ |
| INT missingHarmonicFlag, /*!< Flag indicating if a strong tonal component is missing.*/ |
| FIXP_DBL weightFac, /*!< Weightening factor for the difference between orig and sbr. */ |
| INVF_MODE diffThres, /*!< Threshold value to control the inverse filtering decision.*/ |
| INVF_MODE inverseFilteringLevel) /*!< Inverse filtering level of the current band.*/ |
| { |
| INT scale, l, k; |
| FIXP_DBL meanOrig=FL2FXCONST_DBL(0.0f), meanSbr=FL2FXCONST_DBL(0.0f), diff; |
| FIXP_DBL invIndex = GetInvInt(stopIndex-startIndex); |
| FIXP_DBL invChannel = GetInvInt(stopChannel-startChannel); |
| FIXP_DBL accu; |
| |
| /* |
| Calculate the mean value, over the current time segment, for the original, the HFR |
| and the difference, over all channels in the current frequency range. |
| */ |
| |
| if(missingHarmonicFlag == 1){ |
| for(l = startChannel; l < stopChannel;l++){ |
| /* tonalityOrig */ |
| accu = FL2FXCONST_DBL(0.0f); |
| for(k = startIndex ; k < stopIndex; k++){ |
| accu += fMultDiv2(quotaMatrixOrig[k][l], invIndex); |
| } |
| meanOrig = fixMax(meanOrig,(accu<<1)); |
| |
| /* tonalitySbr */ |
| accu = FL2FXCONST_DBL(0.0f); |
| for(k = startIndex ; k < stopIndex; k++){ |
| accu += fMultDiv2(quotaMatrixOrig[k][indexVector[l]], invIndex); |
| } |
| meanSbr = fixMax(meanSbr,(accu<<1)); |
| |
| } |
| } |
| else{ |
| for(l = startChannel; l < stopChannel;l++){ |
| /* tonalityOrig */ |
| accu = FL2FXCONST_DBL(0.0f); |
| for(k = startIndex ; k < stopIndex; k++){ |
| accu += fMultDiv2(quotaMatrixOrig[k][l], invIndex); |
| } |
| meanOrig += fMult((accu<<1), invChannel); |
| |
| /* tonalitySbr */ |
| accu = FL2FXCONST_DBL(0.0f); |
| for(k = startIndex ; k < stopIndex; k++){ |
| accu += fMultDiv2(quotaMatrixOrig[k][indexVector[l]], invIndex); |
| } |
| meanSbr += fMult((accu<<1), invChannel); |
| } |
| } |
| |
| /* Small fix to avoid noise during silent passages.*/ |
| if( meanOrig <= FL2FXCONST_DBL(0.000976562f*RELAXATION_FLOAT) && |
| meanSbr <= FL2FXCONST_DBL(0.000976562f*RELAXATION_FLOAT) ) |
| { |
| meanOrig = FL2FXCONST_DBL(101.5936673f*RELAXATION_FLOAT); |
| meanSbr = FL2FXCONST_DBL(101.5936673f*RELAXATION_FLOAT); |
| } |
| |
| meanOrig = fixMax(meanOrig,RELAXATION); |
| meanSbr = fixMax(meanSbr,RELAXATION); |
| |
| if (missingHarmonicFlag == 1 || |
| inverseFilteringLevel == INVF_MID_LEVEL || |
| inverseFilteringLevel == INVF_LOW_LEVEL || |
| inverseFilteringLevel == INVF_OFF || |
| inverseFilteringLevel <= diffThres) |
| { |
| diff = RELAXATION; |
| } |
| else { |
| accu = fDivNorm(meanSbr, meanOrig, &scale); |
| |
| diff = fixMax( RELAXATION, |
| fMult(RELAXATION_FRACT,fMult(weightFac,accu)) >>( RELAXATION_SHIFT-scale ) ) ; |
| } |
| |
| /* |
| * noise Level is now a positive value, i.e. |
| * the more harmonic the signal is the higher noise level, |
| * this makes no sense so we change the sign. |
| *********************************************************/ |
| accu = fDivNorm(diff, meanOrig, &scale); |
| scale -= 2; |
| |
| if ( (scale>0) && (accu > ((FIXP_DBL)MAXVAL_DBL)>>scale) ) { |
| *noiseLevel = (FIXP_DBL)MAXVAL_DBL; |
| } |
| else { |
| *noiseLevel = scaleValue(accu, scale); |
| } |
| |
| /* |
| * Add a noise floor offset to compensate for bias in the detector |
| *****************************************************************/ |
| if(!missingHarmonicFlag) |
| *noiseLevel = fMult(*noiseLevel, noiseFloorOffset)<<(NOISE_FLOOR_OFFSET_SCALING); |
| |
| /* |
| * check to see that we don't exceed the maximum allowed level |
| **************************************************************/ |
| *noiseLevel = fixMin(*noiseLevel, ana_max_level); /* ana_max_level is scaled with factor 0.25 */ |
| } |
| |
| /**************************************************************************/ |
| /*! |
| \brief Does the noise floor level estiamtion. |
| The function calls the Noisefloor estimation function |
| for the time segments decided based upon the transient |
| information. The block is always divided into one or two segments. |
| |
| |
| \return none |
| |
| */ |
| /**************************************************************************/ |
| void |
| FDKsbrEnc_sbrNoiseFloorEstimateQmf(HANDLE_SBR_NOISE_FLOOR_ESTIMATE h_sbrNoiseFloorEstimate, /*!< Handle to SBR_NOISE_FLOOR_ESTIMATE struct */ |
| const SBR_FRAME_INFO *frame_info, /*!< Time frequency grid of the current frame. */ |
| FIXP_DBL *noiseLevels, /*!< Pointer to vector to store the noise levels in.*/ |
| FIXP_DBL **quotaMatrixOrig, /*!< Matrix holding the quota values of the original. */ |
| SCHAR *indexVector, /*!< Index vector to obtain the patched data. */ |
| INT missingHarmonicsFlag, /*!< Flag indicating if a strong tonal component will be missing. */ |
| INT startIndex, /*!< Start index. */ |
| int numberOfEstimatesPerFrame, /*!< The number of tonality estimates per frame. */ |
| int transientFrame, /*!< A flag indicating if a transient is present. */ |
| INVF_MODE* pInvFiltLevels, /*!< Pointer to the vector holding the inverse filtering levels. */ |
| UINT sbrSyntaxFlags |
| ) |
| |
| { |
| |
| INT nNoiseEnvelopes, startPos[2], stopPos[2], env, band; |
| |
| INT noNoiseBands = h_sbrNoiseFloorEstimate->noNoiseBands; |
| INT *freqBandTable = h_sbrNoiseFloorEstimate->freqBandTableQmf; |
| |
| nNoiseEnvelopes = frame_info->nNoiseEnvelopes; |
| |
| if (sbrSyntaxFlags & SBR_SYNTAX_LOW_DELAY) { |
| nNoiseEnvelopes = 1; |
| startPos[0] = startIndex; |
| stopPos[0] = startIndex + min(numberOfEstimatesPerFrame,2); |
| } else |
| if(nNoiseEnvelopes == 1){ |
| startPos[0] = startIndex; |
| stopPos[0] = startIndex + 2; |
| } |
| else{ |
| startPos[0] = startIndex; |
| stopPos[0] = startIndex + 1; |
| startPos[1] = startIndex + 1; |
| stopPos[1] = startIndex + 2; |
| } |
| |
| /* |
| * Estimate the noise floor. |
| **************************************/ |
| for(env = 0; env < nNoiseEnvelopes; env++){ |
| for(band = 0; band < noNoiseBands; band++){ |
| FDK_ASSERT( (band + env*noNoiseBands) < MAX_NUM_NOISE_VALUES); |
| qmfBasedNoiseFloorDetection(&noiseLevels[band + env*noNoiseBands], |
| quotaMatrixOrig, |
| indexVector, |
| startPos[env], |
| stopPos[env], |
| freqBandTable[band], |
| freqBandTable[band+1], |
| h_sbrNoiseFloorEstimate->ana_max_level, |
| h_sbrNoiseFloorEstimate->noiseFloorOffset[band], |
| missingHarmonicsFlag, |
| h_sbrNoiseFloorEstimate->weightFac, |
| h_sbrNoiseFloorEstimate->diffThres, |
| pInvFiltLevels[band]); |
| } |
| } |
| |
| |
| /* |
| * Smoothing of the values. |
| **************************/ |
| smoothingOfNoiseLevels(noiseLevels, |
| nNoiseEnvelopes, |
| h_sbrNoiseFloorEstimate->noNoiseBands, |
| h_sbrNoiseFloorEstimate->prevNoiseLevels, |
| h_sbrNoiseFloorEstimate->smoothFilter, |
| transientFrame); |
| |
| |
| /* quantisation*/ |
| for(env = 0; env < nNoiseEnvelopes; env++){ |
| for(band = 0; band < noNoiseBands; band++){ |
| FDK_ASSERT( (band + env*noNoiseBands) < MAX_NUM_NOISE_VALUES); |
| noiseLevels[band + env*noNoiseBands] = |
| (FIXP_DBL)NOISE_FLOOR_OFFSET_64 - (FIXP_DBL)CalcLdData(noiseLevels[band + env*noNoiseBands]+(FIXP_DBL)1) + QuantOffset; |
| } |
| } |
| } |
| |
| /**************************************************************************/ |
| /*! |
| \brief |
| |
| |
| \return errorCode, noError if successful |
| |
| */ |
| /**************************************************************************/ |
| static INT |
| downSampleLoRes(INT *v_result, /*!< */ |
| INT num_result, /*!< */ |
| const UCHAR *freqBandTableRef,/*!< */ |
| INT num_Ref) /*!< */ |
| { |
| INT step; |
| INT i,j; |
| INT org_length,result_length; |
| INT v_index[MAX_FREQ_COEFFS/2]; |
| |
| /* init */ |
| org_length=num_Ref; |
| result_length=num_result; |
| |
| v_index[0]=0; /* Always use left border */ |
| i=0; |
| while(org_length > 0) /* Create downsample vector */ |
| { |
| i++; |
| step=org_length/result_length; /* floor; */ |
| org_length=org_length - step; |
| result_length--; |
| v_index[i]=v_index[i-1]+step; |
| } |
| |
| if(i != num_result ) /* Should never happen */ |
| return (1);/* error downsampling */ |
| |
| for(j=0;j<=i;j++) /* Use downsample vector to index LoResolution vector. */ |
| { |
| v_result[j]=freqBandTableRef[v_index[j]]; |
| } |
| |
| return (0); |
| } |
| |
| /**************************************************************************/ |
| /*! |
| \brief Initialize an instance of the noise floor level estimation module. |
| |
| |
| \return errorCode, noError if successful |
| |
| */ |
| /**************************************************************************/ |
| INT |
| FDKsbrEnc_InitSbrNoiseFloorEstimate (HANDLE_SBR_NOISE_FLOOR_ESTIMATE h_sbrNoiseFloorEstimate, /*!< Handle to SBR_NOISE_FLOOR_ESTIMATE struct */ |
| INT ana_max_level, /*!< Maximum level of the adaptive noise. */ |
| const UCHAR *freqBandTable, /*!< Frequany band table. */ |
| INT nSfb, /*!< Number of frequency bands. */ |
| INT noiseBands, /*!< Number of noise bands per octave. */ |
| INT noiseFloorOffset, /*!< Noise floor offset. */ |
| INT timeSlots, /*!< Number of time slots in a frame. */ |
| UINT useSpeechConfig /*!< Flag: adapt tuning parameters according to speech */ |
| ) |
| { |
| INT i, qexp, qtmp; |
| FIXP_DBL tmp, exp; |
| |
| FDKmemclear(h_sbrNoiseFloorEstimate,sizeof(SBR_NOISE_FLOOR_ESTIMATE)); |
| |
| h_sbrNoiseFloorEstimate->smoothFilter = smoothFilter; |
| if (useSpeechConfig) { |
| h_sbrNoiseFloorEstimate->weightFac = (FIXP_DBL)MAXVAL_DBL; |
| h_sbrNoiseFloorEstimate->diffThres = INVF_LOW_LEVEL; |
| } |
| else { |
| h_sbrNoiseFloorEstimate->weightFac = FL2FXCONST_DBL(0.25f); |
| h_sbrNoiseFloorEstimate->diffThres = INVF_MID_LEVEL; |
| } |
| |
| h_sbrNoiseFloorEstimate->timeSlots = timeSlots; |
| h_sbrNoiseFloorEstimate->noiseBands = noiseBands; |
| |
| /* h_sbrNoiseFloorEstimate->ana_max_level is scaled by 0.25 */ |
| switch(ana_max_level) |
| { |
| case 6: |
| h_sbrNoiseFloorEstimate->ana_max_level = (FIXP_DBL)MAXVAL_DBL; |
| break; |
| case 3: |
| h_sbrNoiseFloorEstimate->ana_max_level = FL2FXCONST_DBL(0.5); |
| break; |
| case -3: |
| h_sbrNoiseFloorEstimate->ana_max_level = FL2FXCONST_DBL(0.125); |
| break; |
| default: |
| /* Should not enter here */ |
| h_sbrNoiseFloorEstimate->ana_max_level = (FIXP_DBL)MAXVAL_DBL; |
| break; |
| } |
| |
| /* |
| calculate number of noise bands and allocate |
| */ |
| if(FDKsbrEnc_resetSbrNoiseFloorEstimate(h_sbrNoiseFloorEstimate,freqBandTable,nSfb)) |
| return(1); |
| |
| if(noiseFloorOffset == 0) { |
| tmp = ((FIXP_DBL)MAXVAL_DBL)>>NOISE_FLOOR_OFFSET_SCALING; |
| } |
| else { |
| /* noiseFloorOffset has to be smaller than 12, because |
| the result of the calculation below must be smaller than 1: |
| (2^(noiseFloorOffset/3))*2^4<1 */ |
| FDK_ASSERT(noiseFloorOffset<12); |
| |
| /* Assumes the noise floor offset in tuning table are in q31 */ |
| /* Change the qformat here when non-zero values would be filled */ |
| exp = fDivNorm((FIXP_DBL)noiseFloorOffset, 3, &qexp); |
| tmp = fPow(2, DFRACT_BITS-1, exp, qexp, &qtmp); |
| tmp = scaleValue(tmp, qtmp-NOISE_FLOOR_OFFSET_SCALING); |
| } |
| |
| for(i=0;i<h_sbrNoiseFloorEstimate->noNoiseBands;i++) { |
| h_sbrNoiseFloorEstimate->noiseFloorOffset[i] = tmp; |
| } |
| |
| return (0); |
| } |
| |
| /**************************************************************************/ |
| /*! |
| \brief Resets the current instance of the noise floor estiamtion |
| module. |
| |
| |
| \return errorCode, noError if successful |
| |
| */ |
| /**************************************************************************/ |
| INT |
| FDKsbrEnc_resetSbrNoiseFloorEstimate (HANDLE_SBR_NOISE_FLOOR_ESTIMATE h_sbrNoiseFloorEstimate, /*!< Handle to SBR_NOISE_FLOOR_ESTIMATE struct */ |
| const UCHAR *freqBandTable, /*!< Frequany band table. */ |
| INT nSfb) /*!< Number of bands in the frequency band table. */ |
| { |
| INT k2,kx; |
| |
| /* |
| * Calculate number of noise bands |
| ***********************************/ |
| k2=freqBandTable[nSfb]; |
| kx=freqBandTable[0]; |
| if(h_sbrNoiseFloorEstimate->noiseBands == 0){ |
| h_sbrNoiseFloorEstimate->noNoiseBands = 1; |
| } |
| else{ |
| /* |
| * Calculate number of noise bands 1,2 or 3 bands/octave |
| ********************************************************/ |
| FIXP_DBL tmp, ratio, lg2; |
| INT ratio_e, qlg2, nNoiseBands; |
| |
| ratio = fDivNorm(k2, kx, &ratio_e); |
| lg2 = fLog2(ratio, ratio_e, &qlg2); |
| tmp = fMult((FIXP_DBL)(h_sbrNoiseFloorEstimate->noiseBands<<24), lg2); |
| tmp = scaleValue(tmp, qlg2-23); |
| |
| nNoiseBands = (INT)((tmp + (FIXP_DBL)1) >> 1); |
| |
| |
| if (nNoiseBands > MAX_NUM_NOISE_COEFFS ) { |
| nNoiseBands = MAX_NUM_NOISE_COEFFS; |
| } |
| |
| if( nNoiseBands == 0 ) { |
| nNoiseBands = 1; |
| } |
| |
| h_sbrNoiseFloorEstimate->noNoiseBands = nNoiseBands; |
| |
| } |
| |
| |
| return(downSampleLoRes(h_sbrNoiseFloorEstimate->freqBandTableQmf, |
| h_sbrNoiseFloorEstimate->noNoiseBands, |
| freqBandTable,nSfb)); |
| } |
| |
| /**************************************************************************/ |
| /*! |
| \brief Deletes the current instancce of the noise floor level |
| estimation module. |
| |
| |
| \return none |
| |
| */ |
| /**************************************************************************/ |
| void |
| FDKsbrEnc_deleteSbrNoiseFloorEstimate (HANDLE_SBR_NOISE_FLOOR_ESTIMATE h_sbrNoiseFloorEstimate) /*!< Handle to SBR_NOISE_FLOOR_ESTIMATE struct */ |
| { |
| |
| if (h_sbrNoiseFloorEstimate) { |
| /* |
| nothing to do |
| */ |
| } |
| } |
