en/compatibility/cts/setup.html - platform/docs/source.android.com - Git at Google

 <html devsite>
   <head>
     <title>Setting up CTS</title>
     <meta name="project_path" value="/_project.yaml" />
     <meta name="book_path" value="/_book.yaml" />
   </head>
   <body>
   <!--
       Copyright 2017 The Android Open Source Project

       Licensed under the Apache License, Version 2.0 (the "License");
       you may not use this file except in compliance with the License.
       You may obtain a copy of the License at

           http://www.apache.org/licenses/LICENSE-2.0

       Unless required by applicable law or agreed to in writing, software
       distributed under the License is distributed on an "AS IS" BASIS,
       WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
       See the License for the specific language governing permissions and
       limitations under the License.
   -->


 <h2 id=physical_environment>Physical environment</h2>
 <h3 id=ble_beacons>Bluetooth LE beacons</h3>
 <p>If the DUT supports the Bluetooth LE feature, then at least three
 Bluetooth LE beacons should be placed within five meters of the DUT for Bluetooth
 LE scan testing. Those beacons can be any kind, do not need to be
 configured or emit anything specific, and can include iBeacon,
 Eddystone, or even devices simulating BLE beacons.</p>

 <h3 id="gnss">GPS/GNSS</h3>
 <p>If the DUT supports the Global Positioning System (GPS) Global Navigation
 Satellite System (GNSS) feature, then a GPS/GNSS signal, with GPS portion
 compliant with ICD-GPS-200C, should be provided to the DUT at a suitable signal
 level for reception and GPS location calculation. The GPS/GNSS signal source can
 be of any kind, ranging from a satellite simulator, to a GPS/GNSS repeater of
 outdoor signals, simply to placement of the DUT close enough to a window such that
 it can directly receive enough GPS/GNSS signal.</p>

 <aside class="caution">
   <strong>Caution:</strong> For the GPS testing, the internet connection setup
   must not block connections to  supl.google.com port 7276. This port is used to
   download GPS assistance data for testing position calculation on the local device.
 </aside>

 <h3 id=wifi>Wi-Fi and IPv6</h3>
 <p>CTS tests require a Wi-Fi network that supports IPv6, can treat the Device
 Under Test (DUT) as an isolated client, and has an internet
 connection. An isolated client refers to a
 configuration where the DUT does not have visibility to the
 broadcast/multinetwork messages on that subnetwork, either by a Wi-Fi AP
 configuration or by running the DUT on an isolated sub-network without
 other devices being connected.</p>

 <p>If you don't have access to a native IPv6 network, an IPv6 carrier network,
 or a VPN to pass some tests depending on IPv6, you may instead use a Wi-Fi
 access point and an IPv6 tunnel. See Wikipedia <a
 href="http://en.wikipedia.org/wiki/List_of_IPv6_tunnel_brokers">list of IPv6
 tunnel brokers</a>.</p>

 <h2 id=desktop_setup>Desktop machine setup</h2>
 <aside class="caution"><strong>Caution:</strong> CTS currently supports 64-bit
 Linux and Mac OS host machines. CTS will not work on Windows OS.</aside>

 <h3 id=adb>ADB and AAPT</h3>
 <p>Before running the CTS, make sure you have recent versions of both <a
 href="http://developer.android.com/tools/help/adb.html">Android Debug
 Bridge (adb)</a> and <a
 href="http://developer.android.com/guide/topics/manifest/uses-feature-element.html#testing">Android
 Asset Packaging Tool (AAPT)</a> installed and those tools' location added
 to the system path of your machine.</p>

 <p>To install ADB, download the <a
 href="http://developer.android.com/sdk/index.html#Other">Android SDK Tools</a>
 package for your operating system, open it, and follow the instructions in the
 included README file. For troubleshooting information, see <a
 href="http://developer.android.com/sdk/installing/index.html?pkg=tools">Installing
 the Stand-alone SDK Tools</a>.</p>

 <p>Ensure <code>adb</code> and <code>aapt</code> are in your system path. The
 following command assumes you've opened the package archive in your home
 directory:</p>
 <hr>
 <pre class="devsite-terminal devsite-click-to-copy">
 export PATH=$PATH:$HOME/android-sdk-linux/build-tools/&lt;version&gt;
 </pre>

 <p class="note"><strong>Note:</strong> Please ensure your starting path and
 directory name are correct.</p>

 <h3 id=JDK>Java Development Kit (JDK)</h3>
 <p>Install the proper version of the Java Development Kit (JDK). For Android 7.0&mdash;
 </p>
 <ul>
   <li>On Ubuntu, use <a href="http://openjdk.java.net/install/">OpenJDK 8</a>.
   <li>On Mac OS, use <a
   href="http://www.oracle.com/technetwork/java/javase/downloads/java-archive-javase8-2177648.html#jdk-8u45-oth-JPR">jdk
   8u45 or newer</a>.</li>
 </ul>
 <p>
 For details, see the <a href="/setup/requirements.html#jdk">JDK requirements</a>.
 </p>

 <h3 id=CTS_files>CTS files</h3>

 <p><a href="downloads.html">Download</a> and open the CTS
 packages matching your devices' Android version and all the Application Binary
 Interfaces (ABIs) your devices support.</p>

 <p>Download and open the latest version of the <a
 href="downloads.html#cts-media-files">CTS Media
 Files</a>.</p>

 <h3 id=system_detect>Device detection</h3>
 <p>Follow the step to <a
 href="http://developer.android.com/tools/device.html#setting-up">set up your
 system to detect your device</a>, such as creating a <code>udev</code> rules
 file for Ubuntu Linux.</p>

 <h2 id=device_setup>Android device setup</h2>

 <h3 id=user_builds>User builds</h3>

 <p>A compatible device is defined as a device with a user/release-key signed
 build, so your device should be running a system image based on the known to be
 compatible user build (Android 4.0 and later) from <a
 href="/setup/build-numbers.html">Codenames, Tags, and Build
 Numbers</a>.<br>

 <p class="caution"><strong>Caution:</strong> When used to confirm Android
 compatibility of your final system image, CTS must be executed on devices with
 a user build.</p>

 <h3 id=first-api-level>First API level build property</h3>

 <p>Certain CTS requirements depend on the build a device was originally shipped
 with. For example, devices that originally ship with earlier builds may be excluded from
 system requirements that apply to devices that ship with later builds.</p>

 <p>To make this information available to CTS, device manufacturers may define
 the build-time property: <code>ro.product.first_api_level</code>. The value of this
 property is the first API level the device was commercially launched with.</p>

 <p>OEMs can add <code>PRODUCT_PROPERTY_OVERRIDES</code> into their device.mk file to set
 this property, as shown in the following example: </p>

 <pre class="devsite-click-to-copy">
 #ro.product.first_api_level indicates the first api level, device has been commercially launched on.
 PRODUCT_PROPERTY_OVERRIDES +=\
 ro.product.first_api_level=21
 </pre>

 <aside class="note">
   <b>Note:</b> The property <code>ro.product.first_api_level</code> should be unset (removed)
   for the first build of a product, and set to the correct API level value for all subsequent
   builds. This way the property can correctly identify a new product, and we have lost no
   information about the first API level of the product. If the flag is unset, Android will assign
   <code>Build.VERSION.SDK_INT</code> to <code>ro.product.first_api_level</code>.
 </aside>

 <h3 id=cts-shim-apps>CTS Shim apps</h3>

 <p> Android 7.0 includes the following pre-built apps (built from <a
 href="https://android.googlesource.com/platform/frameworks/base/+/master/packages/CtsShim/build/">this
 source</a>) which do not contain any code except for the manifest: </p>

 <ul>
   <li><code><a href="https://android.googlesource.com/platform/frameworks/base/+/android-7.0.0_r1/packages/CtsShim/CtsShim.apk">
   frameworks/base/packages/CtsShim/CtsShim.apk</a></code><br>
   This apk file is copied to <code>/system/app/CtsShimPrebuilt.apk</code>
   on the system image.
   <li><code><a href="https://android.googlesource.com/platform/frameworks/base/+/android-7.0.0_r1/packages/CtsShim/CtsShimPriv.apk">
   frameworks/base/packages/CtsShim/CtsShimPriv.apk</a></code><br>
   This apk file is copied to <code>/system/priv-app/CtsShimPrivPrebuilt.apk</code>
   on the system image.</li>
 </ul>

 <p> CTS uses these apps to test privileges and permissions. To pass the tests, you must
 preload the apps into the appropriate directories on the system image without
 re-signing them.</p>

 <h3 id=storage_requirements>Storage requirements</h3>
 <p>The CTS media stress tests require video clips to be on external storage
 (<code>/sdcard</code>). Most of the clips are from <a
 href="https://peach.blender.org/">Big Buck Bunny</a> which is copyrighted by
 the Blender Foundation under the <a
 href="http://creativecommons.org/licenses/by/3.0/">Creative Commons Attribution 3.0 license.</a></p>
 <p>The required space depends on the maximum video playback resolution supported
   by the device (See section 5 in the compatibility definition document for the
   platform version of the required resolutions.) Note that the video playback
   capabilities of the device under test will be checked via the <code>android.media.CamcorderProfile</code> APIs for earlier versions of Android and the <code>android.media.MediaCodecInfo.CodecCapabilities</code> APIs from Android 5.0.</p>
 <p>Here are the storage requirements by maximum video playback resolution:</p>
 <ul>
   <li>480x360: 98MB
   <li>720x480: 193MB
   <li>1280x720: 606MB
   <li>1920x1080: 1863MB
 </ul>

 <h3 id=screen_storage>Screen and storage</h3>
 <ol>
 <li>Any device that does not have an embedded screen needs to be connected to a screen.</li>
 <li>If the device has a memory card slot, plug in an empty SD card. <em>Use an
 SD card that supports Ultra High Speed (UHS) Bus with SDHC or SDXC capacity or
 one with at least speed class 10 or higher to ensure it can pass the CTS.</em>
 <p class="warning"><strong>Warning:</strong> CTS may modify/erase data on the SD card plugged into the device.</p>
 </li>
 <li>If the device has SIM card slots, plug in an activated SIM card to each slot. If the device supports SMS, each SIM card should have its own number field populated.</li>
 </li>
 </ol>

 <h3 id=developer_uicc>Developer UICC</h3>

 <p>In order to run CTS carrier API tests, the device needs to have a SIM card
 with carrier privilege rules on it. See <a
 href="/devices/tech/config/uicc.html#prepare_uicc">Preparing
 the UICC</a>.</p>

 <h2 id=config_device>Android device configuration</h2>
 <ol>
   <li>Factory data reset the device: <strong>Settings > Backup &amp; reset > Factory data reset</strong>
     <p class="warning"><strong>Warning:</strong> This will erase all user data from the device.</em></p>
   <li>Set your device's language to English (<strong>United States</strong>) from: <strong>Settings > Language
     & input > Language</strong>
   <li>Turn on the location setting if there is a GPS or Wi-Fi / Cellular network
     feature on the device: <strong>Settings &gt; Location &gt; On</strong>
   <li>Connect to a Wi-Fi network that supports IPv6, can treat the Device
 Under Test (DUT) as an <em>isolated client</em> (see the <a
 href="#physical_environment">Physical Environment</a> section above), and has an
 internet connection: <strong>Settings > Wi-Fi</strong>
   <li>Make sure no lock pattern or password is set on the device: <strong>Settings &gt; Security &gt; Screen
     lock &gt; None</strong>
   <li>Enable <strong>USB debugging</strong> on your device: <strong>Settings &gt; Developer options &gt; USB debugging</strong>.
        <p class="note"><strong>Note:</strong> On Android 4.2 and later, <strong>Developer
         options</strong> is hidden by default. To make them available, go
         to <strong>Settings &gt; About phone</strong> and tap <strong>Build number</strong>
         seven times. Return to the previous screen to find <strong>Developer
         options</strong>. See <a
         href="http://developer.android.com/studio/run/device.html#developer-device-options">Enabling
         On-device Developer Options</a> for additional details.</p>
        <li>Make sure the time is set to 12-hour format: <strong>Settings > Date & time > Use 24-hour format > Off</strong>
   <li>Select: <strong>Settings &gt; Developer options &gt; Stay Awake &gt; On</strong>
   <li>Select: <strong>Settings > Developer options > Allow mock locations &gt; On</strong>
     <p class="note"><strong>Note:</strong> This mock locations setting is applicable only in Android 5.x and 4.4.x.</p>
   <li>Select: <strong>Settings > Developer options > Verify apps over USB > Off</strong>
     <p class="note"><strong>Note:</strong> This verify apps step became required in Android 4.2.</p>
   <li>Launch the browser and dismiss any startup/setup screen.
   <li>Connect the desktop machine that will be used to test the device with a USB cable
     <p class="note"><strong>Note:</strong> When you connect a device running Android 4.2.2 or later
     to your computer, the system shows a dialog asking whether to accept an RSA key that allows
     debugging through this computer. Select <em>Allow USB debugging</em>.</p>
   <li> Install and configure helper apps on the device.
 <p class="note"><strong>Note:</strong> For CTS versions 2.1 R2 through 4.2 R4</em>, set up your device (or emulator)
 to run the accessibility tests with:<br>
 <code>adb install -r android-cts/repository/testcases/CtsDelegatingAccessibilityService.apk</code><br>
 On the device, enable: <strong>Settings > Accessibility > Accessibility >
 Delegating Accessibility Service</strong></p>
 <p class="note"><strong>Note:</strong> For CTS versions prior to 7.0, on devices that declare
 <code>android.software.device_admin</code>, set up your device to run
 the device administration test using:<br>
 <code>adb install -r android-cts/repository/testcases/CtsDeviceAdmin.apk</code><br>
 <p>
 In Settings > Security > Select device administrators, enable the two
 <code>android.deviceadmin.cts.CtsDeviceAdminReceiver*</code> device
 administrators. Ensure the
 <code>android.deviceadmin.cts.CtsDeviceAdminDeactivatedReceiver</code> and any
 other preloaded device administrators remain disabled.
 </p>
 <li>Copy the CTS media files to the device as follows:
 <p class="note"><strong>Note:</strong> For CTS 2.3 R12 and later, if the
 device supports video codecs, the CTS media files must be copied to the
 device.</p>
 <ul>
   <li>Navigate (cd) to the path the media files are downloaded and unzipped to.
   <li>Change the file permissions: <code>chmod u+x copy_media.sh</code>
   <li>Run <code>copy_media.sh</code>:
     <ul>
       <li>To copy clips up to a resolution of 720x480, run: <code>./copy_media.sh 720x480</code>
       <li>If you are not sure about the maximum resolution, try <code>./copy_media.sh all</code> so that all files are copied.
       <li>If there are multiple devices under adb, add the -s (serial) option to the end.
         For example, to copy up to 720x480 to the device with serial 1234567, run: <code>./copy_media.sh 720x480 -s 1234567</code>
     </ul>
 </ul>
 </ol>

   </body>
 </html>
	<html devsite>
	<head>
	<title>Setting up CTS</title>
	<meta name="project_path" value="/_project.yaml" />
	<meta name="book_path" value="/_book.yaml" />
	</head>
	<body>
	<!--
	Copyright 2017 The Android Open Source Project

	Licensed under the Apache License, Version 2.0 (the "License");
	you may not use this file except in compliance with the License.
	You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	-->



	<h2 id=physical_environment>Physical environment</h2>
	<h3 id=ble_beacons>Bluetooth LE beacons</h3>
	<p>If the DUT supports the Bluetooth LE feature, then at least three
	Bluetooth LE beacons should be placed within five meters of the DUT for Bluetooth
	LE scan testing. Those beacons can be any kind, do not need to be
	configured or emit anything specific, and can include iBeacon,
	Eddystone, or even devices simulating BLE beacons.</p>

	<h3 id="gnss">GPS/GNSS</h3>
	<p>If the DUT supports the Global Positioning System (GPS) Global Navigation
	Satellite System (GNSS) feature, then a GPS/GNSS signal, with GPS portion
	compliant with ICD-GPS-200C, should be provided to the DUT at a suitable signal
	level for reception and GPS location calculation. The GPS/GNSS signal source can
	be of any kind, ranging from a satellite simulator, to a GPS/GNSS repeater of
	outdoor signals, simply to placement of the DUT close enough to a window such that
	it can directly receive enough GPS/GNSS signal.</p>

	<aside class="caution">
	<strong>Caution:</strong> For the GPS testing, the internet connection setup
	must not block connections to supl.google.com port 7276. This port is used to
	download GPS assistance data for testing position calculation on the local device.
	</aside>

	<h3 id=wifi>Wi-Fi and IPv6</h3>
	<p>CTS tests require a Wi-Fi network that supports IPv6, can treat the Device
	Under Test (DUT) as an isolated client, and has an internet
	connection. An isolated client refers to a
	configuration where the DUT does not have visibility to the
	broadcast/multinetwork messages on that subnetwork, either by a Wi-Fi AP
	configuration or by running the DUT on an isolated sub-network without
	other devices being connected.</p>

	<p>If you don't have access to a native IPv6 network, an IPv6 carrier network,
	or a VPN to pass some tests depending on IPv6, you may instead use a Wi-Fi
	access point and an IPv6 tunnel. See Wikipedia <a
	href="http://en.wikipedia.org/wiki/List_of_IPv6_tunnel_brokers">list of IPv6
	tunnel brokers</a>.</p>

	<h2 id=desktop_setup>Desktop machine setup</h2>
	<aside class="caution"><strong>Caution:</strong> CTS currently supports 64-bit
	Linux and Mac OS host machines. CTS will not work on Windows OS.</aside>

	<h3 id=adb>ADB and AAPT</h3>
	<p>Before running the CTS, make sure you have recent versions of both <a
	href="http://developer.android.com/tools/help/adb.html">Android Debug
	Bridge (adb)</a> and <a
	href="http://developer.android.com/guide/topics/manifest/uses-feature-element.html#testing">Android
	Asset Packaging Tool (AAPT)</a> installed and those tools' location added
	to the system path of your machine.</p>

	<p>To install ADB, download the <a
	href="http://developer.android.com/sdk/index.html#Other">Android SDK Tools</a>
	package for your operating system, open it, and follow the instructions in the
	included README file. For troubleshooting information, see <a
	href="http://developer.android.com/sdk/installing/index.html?pkg=tools">Installing
	the Stand-alone SDK Tools</a>.</p>

	<p>Ensure <code>adb</code> and <code>aapt</code> are in your system path. The
	following command assumes you've opened the package archive in your home
	directory:</p>
	<hr>
	<pre class="devsite-terminal devsite-click-to-copy">
	export PATH=$PATH:$HOME/android-sdk-linux/build-tools/<version>
	</pre>

	<p class="note"><strong>Note:</strong> Please ensure your starting path and
	directory name are correct.</p>

	<h3 id=JDK>Java Development Kit (JDK)</h3>
	<p>Install the proper version of the Java Development Kit (JDK). For Android 7.0—
	</p>
	<ul>
	<li>On Ubuntu, use <a href="http://openjdk.java.net/install/">OpenJDK 8</a>.
	<li>On Mac OS, use <a
	href="http://www.oracle.com/technetwork/java/javase/downloads/java-archive-javase8-2177648.html#jdk-8u45-oth-JPR">jdk
	8u45 or newer</a>.</li>
	</ul>
	<p>
	For details, see the <a href="/setup/requirements.html#jdk">JDK requirements</a>.
	</p>

	<h3 id=CTS_files>CTS files</h3>

	<p><a href="downloads.html">Download</a> and open the CTS
	packages matching your devices' Android version and all the Application Binary
	Interfaces (ABIs) your devices support.</p>

	<p>Download and open the latest version of the <a
	href="downloads.html#cts-media-files">CTS Media
	Files</a>.</p>

	<h3 id=system_detect>Device detection</h3>
	<p>Follow the step to <a
	href="http://developer.android.com/tools/device.html#setting-up">set up your
	system to detect your device</a>, such as creating a <code>udev</code> rules
	file for Ubuntu Linux.</p>

	<h2 id=device_setup>Android device setup</h2>

	<h3 id=user_builds>User builds</h3>

	<p>A compatible device is defined as a device with a user/release-key signed
	build, so your device should be running a system image based on the known to be
	compatible user build (Android 4.0 and later) from <a
	href="/setup/build-numbers.html">Codenames, Tags, and Build
	Numbers</a>.<br>

	<p class="caution"><strong>Caution:</strong> When used to confirm Android
	compatibility of your final system image, CTS must be executed on devices with
	a user build.</p>

	<h3 id=first-api-level>First API level build property</h3>

	<p>Certain CTS requirements depend on the build a device was originally shipped
	with. For example, devices that originally ship with earlier builds may be excluded from
	system requirements that apply to devices that ship with later builds.</p>

	<p>To make this information available to CTS, device manufacturers may define
	the build-time property: <code>ro.product.first_api_level</code>. The value of this
	property is the first API level the device was commercially launched with.</p>

	<p>OEMs can add <code>PRODUCT_PROPERTY_OVERRIDES</code> into their device.mk file to set
	this property, as shown in the following example: </p>

	<pre class="devsite-click-to-copy">
	#ro.product.first_api_level indicates the first api level, device has been commercially launched on.
	PRODUCT_PROPERTY_OVERRIDES +=\
	ro.product.first_api_level=21
	</pre>

	<aside class="note">
	<b>Note:</b> The property <code>ro.product.first_api_level</code> should be unset (removed)
	for the first build of a product, and set to the correct API level value for all subsequent
	builds. This way the property can correctly identify a new product, and we have lost no
	information about the first API level of the product. If the flag is unset, Android will assign
	<code>Build.VERSION.SDK_INT</code> to <code>ro.product.first_api_level</code>.
	</aside>

	<h3 id=cts-shim-apps>CTS Shim apps</h3>

	<p> Android 7.0 includes the following pre-built apps (built from <a
	href="https://android.googlesource.com/platform/frameworks/base/+/master/packages/CtsShim/build/">this
	source</a>) which do not contain any code except for the manifest: </p>

	<ul>
	<li><code><a href="https://android.googlesource.com/platform/frameworks/base/+/android-7.0.0_r1/packages/CtsShim/CtsShim.apk">
	frameworks/base/packages/CtsShim/CtsShim.apk</a></code><br>
	This apk file is copied to <code>/system/app/CtsShimPrebuilt.apk</code>
	on the system image.
	<li><code><a href="https://android.googlesource.com/platform/frameworks/base/+/android-7.0.0_r1/packages/CtsShim/CtsShimPriv.apk">
	frameworks/base/packages/CtsShim/CtsShimPriv.apk</a></code><br>
	This apk file is copied to <code>/system/priv-app/CtsShimPrivPrebuilt.apk</code>
	on the system image.</li>
	</ul>

	<p> CTS uses these apps to test privileges and permissions. To pass the tests, you must
	preload the apps into the appropriate directories on the system image without
	re-signing them.</p>

	<h3 id=storage_requirements>Storage requirements</h3>
	<p>The CTS media stress tests require video clips to be on external storage
	(<code>/sdcard</code>). Most of the clips are from <a
	href="https://peach.blender.org/">Big Buck Bunny</a> which is copyrighted by
	the Blender Foundation under the <a
	href="http://creativecommons.org/licenses/by/3.0/">Creative Commons Attribution 3.0 license.</a></p>
	<p>The required space depends on the maximum video playback resolution supported
	by the device (See section 5 in the compatibility definition document for the
	platform version of the required resolutions.) Note that the video playback
	capabilities of the device under test will be checked via the <code>android.media.CamcorderProfile</code> APIs for earlier versions of Android and the <code>android.media.MediaCodecInfo.CodecCapabilities</code> APIs from Android 5.0.</p>
	<p>Here are the storage requirements by maximum video playback resolution:</p>
	<ul>
	<li>480x360: 98MB
	<li>720x480: 193MB
	<li>1280x720: 606MB
	<li>1920x1080: 1863MB
	</ul>

	<h3 id=screen_storage>Screen and storage</h3>
	<ol>
	<li>Any device that does not have an embedded screen needs to be connected to a screen.</li>
	<li>If the device has a memory card slot, plug in an empty SD card. <em>Use an
	SD card that supports Ultra High Speed (UHS) Bus with SDHC or SDXC capacity or
	one with at least speed class 10 or higher to ensure it can pass the CTS.</em>
	<p class="warning"><strong>Warning:</strong> CTS may modify/erase data on the SD card plugged into the device.</p>
	</li>
	<li>If the device has SIM card slots, plug in an activated SIM card to each slot. If the device supports SMS, each SIM card should have its own number field populated.</li>
	</li>
	</ol>

	<h3 id=developer_uicc>Developer UICC</h3>

	<p>In order to run CTS carrier API tests, the device needs to have a SIM card
	with carrier privilege rules on it. See <a
	href="/devices/tech/config/uicc.html#prepare_uicc">Preparing
	the UICC</a>.</p>

	<h2 id=config_device>Android device configuration</h2>
	<ol>
	<li>Factory data reset the device: <strong>Settings > Backup & reset > Factory data reset</strong>
	<p class="warning"><strong>Warning:</strong> This will erase all user data from the device.</em></p>
	<li>Set your device's language to English (<strong>United States</strong>) from: <strong>Settings > Language
	& input > Language</strong>
	<li>Turn on the location setting if there is a GPS or Wi-Fi / Cellular network
	feature on the device: <strong>Settings > Location > On</strong>
	<li>Connect to a Wi-Fi network that supports IPv6, can treat the Device
	Under Test (DUT) as an <em>isolated client</em> (see the <a
	href="#physical_environment">Physical Environment</a> section above), and has an
	internet connection: <strong>Settings > Wi-Fi</strong>
	<li>Make sure no lock pattern or password is set on the device: <strong>Settings > Security > Screen
	lock > None</strong>
	<li>Enable <strong>USB debugging</strong> on your device: <strong>Settings > Developer options > USB debugging</strong>.
	<p class="note"><strong>Note:</strong> On Android 4.2 and later, <strong>Developer
	options</strong> is hidden by default. To make them available, go
	to <strong>Settings > About phone</strong> and tap <strong>Build number</strong>
	seven times. Return to the previous screen to find <strong>Developer
	options</strong>. See <a
	href="http://developer.android.com/studio/run/device.html#developer-device-options">Enabling
	On-device Developer Options</a> for additional details.</p>
	<li>Make sure the time is set to 12-hour format: <strong>Settings > Date & time > Use 24-hour format > Off</strong>
	<li>Select: <strong>Settings > Developer options > Stay Awake > On</strong>
	<li>Select: <strong>Settings > Developer options > Allow mock locations > On</strong>
	<p class="note"><strong>Note:</strong> This mock locations setting is applicable only in Android 5.x and 4.4.x.</p>
	<li>Select: <strong>Settings > Developer options > Verify apps over USB > Off</strong>
	<p class="note"><strong>Note:</strong> This verify apps step became required in Android 4.2.</p>
	<li>Launch the browser and dismiss any startup/setup screen.
	<li>Connect the desktop machine that will be used to test the device with a USB cable
	<p class="note"><strong>Note:</strong> When you connect a device running Android 4.2.2 or later
	to your computer, the system shows a dialog asking whether to accept an RSA key that allows
	debugging through this computer. Select <em>Allow USB debugging</em>.</p>
	<li> Install and configure helper apps on the device.
	<p class="note"><strong>Note:</strong> For CTS versions 2.1 R2 through 4.2 R4</em>, set up your device (or emulator)
	to run the accessibility tests with:<br>
	<code>adb install -r android-cts/repository/testcases/CtsDelegatingAccessibilityService.apk</code><br>
	On the device, enable: <strong>Settings > Accessibility > Accessibility >
	Delegating Accessibility Service</strong></p>
	<p class="note"><strong>Note:</strong> For CTS versions prior to 7.0, on devices that declare
	<code>android.software.device_admin</code>, set up your device to run
	the device administration test using:<br>
	<code>adb install -r android-cts/repository/testcases/CtsDeviceAdmin.apk</code><br>
	<p>
	In Settings > Security > Select device administrators, enable the two
	<code>android.deviceadmin.cts.CtsDeviceAdminReceiver*</code> device
	administrators. Ensure the
	<code>android.deviceadmin.cts.CtsDeviceAdminDeactivatedReceiver</code> and any
	other preloaded device administrators remain disabled.
	</p>
	<li>Copy the CTS media files to the device as follows:
	<p class="note"><strong>Note:</strong> For CTS 2.3 R12 and later, if the
	device supports video codecs, the CTS media files must be copied to the
	device.</p>
	<ul>
	<li>Navigate (cd) to the path the media files are downloaded and unzipped to.
	<li>Change the file permissions: <code>chmod u+x copy_media.sh</code>
	<li>Run <code>copy_media.sh</code>:
	<ul>
	<li>To copy clips up to a resolution of 720x480, run: <code>./copy_media.sh 720x480</code>
	<li>If you are not sure about the maximum resolution, try <code>./copy_media.sh all</code> so that all files are copied.
	<li>If there are multiple devices under adb, add the -s (serial) option to the end.
	For example, to copy up to 720x480 to the device with serial 1234567, run: <code>./copy_media.sh 720x480 -s 1234567</code>
	</ul>
	</ul>
	</ol>

	</body>
	</html>