ndk/platforms/android-9/samples/native-audio/jni/native-audio-jni.c

/*
 * Copyright (C) 2010 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */

/* This is a JNI example where we use native methods to play sounds
 * using OpenSL ES. See the corresponding Java source file located at:
 *
 *   src/com/example/nativeaudio/NativeAudio/NativeAudio.java
 */

#include <assert.h>
#include <jni.h>
#include <string.h>

// for __android_log_print(ANDROID_LOG_INFO, "YourApp", "formatted message");
// #include <android/log.h>

// for native audio
#include <SLES/OpenSLES.h>
#include <SLES/OpenSLES_Android.h>

// for native asset manager
#include <sys/types.h>
#include <android/asset_manager.h>
#include <android/asset_manager_jni.h>

// pre-recorded sound clips, both are 8 kHz mono 16-bit signed little endian

static const char hello[] =
#include "hello_clip.h"
;

static const char android[] =
#include "android_clip.h"
;

// engine interfaces
static SLObjectItf engineObject = NULL;
static SLEngineItf engineEngine;

// output mix interfaces
static SLObjectItf outputMixObject = NULL;
static SLEnvironmentalReverbItf outputMixEnvironmentalReverb = NULL;

// buffer queue player interfaces
static SLObjectItf bqPlayerObject = NULL;
static SLPlayItf bqPlayerPlay;
static SLAndroidSimpleBufferQueueItf bqPlayerBufferQueue;
static SLEffectSendItf bqPlayerEffectSend;
static SLMuteSoloItf bqPlayerMuteSolo;
static SLVolumeItf bqPlayerVolume;

// aux effect on the output mix, used by the buffer queue player
static const SLEnvironmentalReverbSettings reverbSettings =
    SL_I3DL2_ENVIRONMENT_PRESET_STONECORRIDOR;

// URI player interfaces
static SLObjectItf uriPlayerObject = NULL;
static SLPlayItf uriPlayerPlay;
static SLSeekItf uriPlayerSeek;
static SLMuteSoloItf uriPlayerMuteSolo;
static SLVolumeItf uriPlayerVolume;

// file descriptor player interfaces
static SLObjectItf fdPlayerObject = NULL;
static SLPlayItf fdPlayerPlay;
static SLSeekItf fdPlayerSeek;
static SLMuteSoloItf fdPlayerMuteSolo;
static SLVolumeItf fdPlayerVolume;

// recorder interfaces
static SLObjectItf recorderObject = NULL;
static SLRecordItf recorderRecord;
static SLAndroidSimpleBufferQueueItf recorderBufferQueue;

// synthesized sawtooth clip
#define SAWTOOTH_FRAMES 8000
static short sawtoothBuffer[SAWTOOTH_FRAMES];

// 5 seconds of recorded audio at 16 kHz mono, 16-bit signed little endian
#define RECORDER_FRAMES (16000 * 5)
static short recorderBuffer[RECORDER_FRAMES];
static unsigned recorderSize = 0;
static SLmilliHertz recorderSR;

// pointer and size of the next player buffer to enqueue, and number of remaining buffers
static short *nextBuffer;
static unsigned nextSize;
static int nextCount;


// synthesize a mono sawtooth wave and place it into a buffer (called automatically on load)
__attribute__((constructor)) static void onDlOpen(void)
{
    unsigned i;
    for (i = 0; i < SAWTOOTH_FRAMES; ++i) {
        sawtoothBuffer[i] = 32768 - ((i % 100) * 660);
    }
}


// this callback handler is called every time a buffer finishes playing
void bqPlayerCallback(SLAndroidSimpleBufferQueueItf bq, void *context)
{
    assert(bq == bqPlayerBufferQueue);
    assert(NULL == context);
    // for streaming playback, replace this test by logic to find and fill the next buffer
    if (--nextCount > 0 && NULL != nextBuffer && 0 != nextSize) {
        SLresult result;
        // enqueue another buffer
        result = (*bqPlayerBufferQueue)->Enqueue(bqPlayerBufferQueue, nextBuffer, nextSize);
        // the most likely other result is SL_RESULT_BUFFER_INSUFFICIENT,
        // which for this code example would indicate a programming error
        assert(SL_RESULT_SUCCESS == result);
    }
}


// this callback handler is called every time a buffer finishes recording
void bqRecorderCallback(SLAndroidSimpleBufferQueueItf bq, void *context)
{
    assert(bq == bqRecorderBufferQueue);
    assert(NULL == context);
    // for streaming recording, here we would call Enqueue to give recorder the next buffer to fill
    // but instead, this is a one-time buffer so we stop recording
    SLresult result;
    result = (*recorderRecord)->SetRecordState(recorderRecord, SL_RECORDSTATE_STOPPED);
    if (SL_RESULT_SUCCESS == result) {
        recorderSize = RECORDER_FRAMES * sizeof(short);
        recorderSR = SL_SAMPLINGRATE_16;
    }
}


// create the engine and output mix objects
void Java_com_example_nativeaudio_NativeAudio_createEngine(JNIEnv* env, jclass clazz)
{
    SLresult result;

    // create engine
    result = slCreateEngine(&engineObject, 0, NULL, 0, NULL, NULL);
    assert(SL_RESULT_SUCCESS == result);

    // realize the engine
    result = (*engineObject)->Realize(engineObject, SL_BOOLEAN_FALSE);
    assert(SL_RESULT_SUCCESS == result);

    // get the engine interface, which is needed in order to create other objects
    result = (*engineObject)->GetInterface(engineObject, SL_IID_ENGINE, &engineEngine);
    assert(SL_RESULT_SUCCESS == result);

    // create output mix, with environmental reverb specified as a non-required interface
    const SLInterfaceID ids[1] = {SL_IID_ENVIRONMENTALREVERB};
    const SLboolean req[1] = {SL_BOOLEAN_FALSE};
    result = (*engineEngine)->CreateOutputMix(engineEngine, &outputMixObject, 1, ids, req);
    assert(SL_RESULT_SUCCESS == result);

    // realize the output mix
    result = (*outputMixObject)->Realize(outputMixObject, SL_BOOLEAN_FALSE);
    assert(SL_RESULT_SUCCESS == result);

    // get the environmental reverb interface
    // this could fail if the environmental reverb effect is not available,
    // either because the feature is not present, excessive CPU load, or
    // the required MODIFY_AUDIO_SETTINGS permission was not requested and granted
    result = (*outputMixObject)->GetInterface(outputMixObject, SL_IID_ENVIRONMENTALREVERB,
            &outputMixEnvironmentalReverb);
    if (SL_RESULT_SUCCESS == result) {
        result = (*outputMixEnvironmentalReverb)->SetEnvironmentalReverbProperties(
                outputMixEnvironmentalReverb, &reverbSettings);
    }
    // ignore unsuccessful result codes for environmental reverb, as it is optional for this example

}


// create buffer queue audio player
void Java_com_example_nativeaudio_NativeAudio_createBufferQueueAudioPlayer(JNIEnv* env,
        jclass clazz)
{
    SLresult result;

    // configure audio source
    SLDataLocator_AndroidSimpleBufferQueue loc_bufq = {SL_DATALOCATOR_ANDROIDSIMPLEBUFFERQUEUE, 2};
    SLDataFormat_PCM format_pcm = {SL_DATAFORMAT_PCM, 1, SL_SAMPLINGRATE_8,
        SL_PCMSAMPLEFORMAT_FIXED_16, SL_PCMSAMPLEFORMAT_FIXED_16,
        SL_SPEAKER_FRONT_CENTER, SL_BYTEORDER_LITTLEENDIAN};
    SLDataSource audioSrc = {&loc_bufq, &format_pcm};

    // configure audio sink
    SLDataLocator_OutputMix loc_outmix = {SL_DATALOCATOR_OUTPUTMIX, outputMixObject};
    SLDataSink audioSnk = {&loc_outmix, NULL};

    // create audio player
    const SLInterfaceID ids[3] = {SL_IID_BUFFERQUEUE, SL_IID_EFFECTSEND,
            /*SL_IID_MUTESOLO,*/ SL_IID_VOLUME};
    const SLboolean req[3] = {SL_BOOLEAN_TRUE, SL_BOOLEAN_TRUE,
            /*SL_BOOLEAN_TRUE,*/ SL_BOOLEAN_TRUE};
    result = (*engineEngine)->CreateAudioPlayer(engineEngine, &bqPlayerObject, &audioSrc, &audioSnk,
            3, ids, req);
    assert(SL_RESULT_SUCCESS == result);

    // realize the player
    result = (*bqPlayerObject)->Realize(bqPlayerObject, SL_BOOLEAN_FALSE);
    assert(SL_RESULT_SUCCESS == result);

    // get the play interface
    result = (*bqPlayerObject)->GetInterface(bqPlayerObject, SL_IID_PLAY, &bqPlayerPlay);
    assert(SL_RESULT_SUCCESS == result);

    // get the buffer queue interface
    result = (*bqPlayerObject)->GetInterface(bqPlayerObject, SL_IID_BUFFERQUEUE,
            &bqPlayerBufferQueue);
    assert(SL_RESULT_SUCCESS == result);

    // register callback on the buffer queue
    result = (*bqPlayerBufferQueue)->RegisterCallback(bqPlayerBufferQueue, bqPlayerCallback, NULL);
    assert(SL_RESULT_SUCCESS == result);

    // get the effect send interface
    result = (*bqPlayerObject)->GetInterface(bqPlayerObject, SL_IID_EFFECTSEND,
            &bqPlayerEffectSend);
    assert(SL_RESULT_SUCCESS == result);

#if 0   // mute/solo is not supported for sources that are known to be mono, as this is
    // get the mute/solo interface
    result = (*bqPlayerObject)->GetInterface(bqPlayerObject, SL_IID_MUTESOLO, &bqPlayerMuteSolo);
    assert(SL_RESULT_SUCCESS == result);
#endif

    // get the volume interface
    result = (*bqPlayerObject)->GetInterface(bqPlayerObject, SL_IID_VOLUME, &bqPlayerVolume);
    assert(SL_RESULT_SUCCESS == result);

    // set the player's state to playing
    result = (*bqPlayerPlay)->SetPlayState(bqPlayerPlay, SL_PLAYSTATE_PLAYING);
    assert(SL_RESULT_SUCCESS == result);

}


// create URI audio player
jboolean Java_com_example_nativeaudio_NativeAudio_createUriAudioPlayer(JNIEnv* env, jclass clazz,
        jstring uri)
{
    SLresult result;

    // convert Java string to UTF-8
    const jbyte *utf8 = (*env)->GetStringUTFChars(env, uri, NULL);
    assert(NULL != utf8);

    // configure audio source
    // (requires the INTERNET permission depending on the uri parameter)
    SLDataLocator_URI loc_uri = {SL_DATALOCATOR_URI, (SLchar *) utf8};
    SLDataFormat_MIME format_mime = {SL_DATAFORMAT_MIME, NULL, SL_CONTAINERTYPE_UNSPECIFIED};
    SLDataSource audioSrc = {&loc_uri, &format_mime};

    // configure audio sink
    SLDataLocator_OutputMix loc_outmix = {SL_DATALOCATOR_OUTPUTMIX, outputMixObject};
    SLDataSink audioSnk = {&loc_outmix, NULL};

    // create audio player
    const SLInterfaceID ids[3] = {SL_IID_SEEK, SL_IID_MUTESOLO, SL_IID_VOLUME};
    const SLboolean req[3] = {SL_BOOLEAN_TRUE, SL_BOOLEAN_TRUE, SL_BOOLEAN_TRUE};
    result = (*engineEngine)->CreateAudioPlayer(engineEngine, &uriPlayerObject, &audioSrc,
            &audioSnk, 3, ids, req);
    // note that an invalid URI is not detected here, but during prepare/prefetch on Android,
    // or possibly during Realize on other platforms
    assert(SL_RESULT_SUCCESS == result);

    // release the Java string and UTF-8
    (*env)->ReleaseStringUTFChars(env, uri, utf8);

    // realize the player
    result = (*uriPlayerObject)->Realize(uriPlayerObject, SL_BOOLEAN_FALSE);
    // this will always succeed on Android, but we check result for portability to other platforms
    if (SL_RESULT_SUCCESS != result) {
        (*uriPlayerObject)->Destroy(uriPlayerObject);
        uriPlayerObject = NULL;
        return JNI_FALSE;
    }

    // get the play interface
    result = (*uriPlayerObject)->GetInterface(uriPlayerObject, SL_IID_PLAY, &uriPlayerPlay);
    assert(SL_RESULT_SUCCESS == result);

    // get the seek interface
    result = (*uriPlayerObject)->GetInterface(uriPlayerObject, SL_IID_SEEK, &uriPlayerSeek);
    assert(SL_RESULT_SUCCESS == result);

    // get the mute/solo interface
    result = (*uriPlayerObject)->GetInterface(uriPlayerObject, SL_IID_MUTESOLO, &uriPlayerMuteSolo);
    assert(SL_RESULT_SUCCESS == result);

    // get the volume interface
    result = (*uriPlayerObject)->GetInterface(uriPlayerObject, SL_IID_VOLUME, &uriPlayerVolume);
    assert(SL_RESULT_SUCCESS == result);

    return JNI_TRUE;
}


// set the playing state for the URI audio player
// to PLAYING (true) or PAUSED (false)
void Java_com_example_nativeaudio_NativeAudio_setPlayingUriAudioPlayer(JNIEnv* env,
        jclass clazz, jboolean isPlaying)
{
    SLresult result;

    // make sure the URI audio player was created
    if (NULL != uriPlayerPlay) {

        // set the player's state
        result = (*uriPlayerPlay)->SetPlayState(uriPlayerPlay, isPlaying ?
            SL_PLAYSTATE_PLAYING : SL_PLAYSTATE_PAUSED);
        assert(SL_RESULT_SUCCESS == result);

    }

}


// set the whole file looping state for the URI audio player
void Java_com_example_nativeaudio_NativeAudio_setLoopingUriAudioPlayer(JNIEnv* env,
        jclass clazz, jboolean isLooping)
{
    SLresult result;

    // make sure the URI audio player was created
    if (NULL != uriPlayerSeek) {

        // set the looping state
        result = (*uriPlayerSeek)->SetLoop(uriPlayerSeek, (SLboolean) isLooping, 0,
                SL_TIME_UNKNOWN);
        assert(SL_RESULT_SUCCESS == result);

    }

}


// expose the mute/solo APIs to Java for one of the 3 players

static SLMuteSoloItf getMuteSolo()
{
    if (uriPlayerMuteSolo != NULL)
        return uriPlayerMuteSolo;
    else if (fdPlayerMuteSolo != NULL)
        return fdPlayerMuteSolo;
    else
        return bqPlayerMuteSolo;
}

void Java_com_example_nativeaudio_NativeAudio_setChannelMuteUriAudioPlayer(JNIEnv* env,
        jclass clazz, jint chan, jboolean mute)
{
    SLresult result;
    SLMuteSoloItf muteSoloItf = getMuteSolo();
    if (NULL != muteSoloItf) {
        result = (*muteSoloItf)->SetChannelMute(muteSoloItf, chan, mute);
        assert(SL_RESULT_SUCCESS == result);
    }
}

void Java_com_example_nativeaudio_NativeAudio_setChannelSoloUriAudioPlayer(JNIEnv* env,
        jclass clazz, jint chan, jboolean solo)
{
    SLresult result;
    SLMuteSoloItf muteSoloItf = getMuteSolo();
    if (NULL != muteSoloItf) {
        result = (*muteSoloItf)->SetChannelSolo(muteSoloItf, chan, solo);
        assert(SL_RESULT_SUCCESS == result);
    }
}

int Java_com_example_nativeaudio_NativeAudio_getNumChannelsUriAudioPlayer(JNIEnv* env, jclass clazz)
{
    SLuint8 numChannels;
    SLresult result;
    SLMuteSoloItf muteSoloItf = getMuteSolo();
    if (NULL != muteSoloItf) {
        result = (*muteSoloItf)->GetNumChannels(muteSoloItf, &numChannels);
        if (SL_RESULT_PRECONDITIONS_VIOLATED == result) {
            // channel count is not yet known
            numChannels = 0;
        } else {
            assert(SL_RESULT_SUCCESS == result);
        }
    } else {
        numChannels = 0;
    }
    return numChannels;
}

// expose the volume APIs to Java for one of the 3 players

static SLVolumeItf getVolume()
{
    if (uriPlayerVolume != NULL)
        return uriPlayerVolume;
    else if (fdPlayerVolume != NULL)
        return fdPlayerVolume;
    else
        return bqPlayerVolume;
}

void Java_com_example_nativeaudio_NativeAudio_setVolumeUriAudioPlayer(JNIEnv* env, jclass clazz,
        jint millibel)
{
    SLresult result;
    SLVolumeItf volumeItf = getVolume();
    if (NULL != volumeItf) {
        result = (*volumeItf)->SetVolumeLevel(volumeItf, millibel);
        assert(SL_RESULT_SUCCESS == result);
    }
}

void Java_com_example_nativeaudio_NativeAudio_setMuteUriAudioPlayer(JNIEnv* env, jclass clazz,
        jboolean mute)
{
    SLresult result;
    SLVolumeItf volumeItf = getVolume();
    if (NULL != volumeItf) {
        result = (*volumeItf)->SetMute(volumeItf, mute);
        assert(SL_RESULT_SUCCESS == result);
    }
}

void Java_com_example_nativeaudio_NativeAudio_enableStereoPositionUriAudioPlayer(JNIEnv* env,
        jclass clazz, jboolean enable)
{
    SLresult result;
    SLVolumeItf volumeItf = getVolume();
    if (NULL != volumeItf) {
        result = (*volumeItf)->EnableStereoPosition(volumeItf, enable);
        assert(SL_RESULT_SUCCESS == result);
    }
}

void Java_com_example_nativeaudio_NativeAudio_setStereoPositionUriAudioPlayer(JNIEnv* env,
        jclass clazz, jint permille)
{
    SLresult result;
    SLVolumeItf volumeItf = getVolume();
    if (NULL != volumeItf) {
        result = (*volumeItf)->SetStereoPosition(volumeItf, permille);
        assert(SL_RESULT_SUCCESS == result);
    }
}

// enable reverb on the buffer queue player
jboolean Java_com_example_nativeaudio_NativeAudio_enableReverb(JNIEnv* env, jclass clazz,
        jboolean enabled)
{
    SLresult result;

    // we might not have been able to add environmental reverb to the output mix
    if (NULL == outputMixEnvironmentalReverb) {
        return JNI_FALSE;
    }

    result = (*bqPlayerEffectSend)->EnableEffectSend(bqPlayerEffectSend,
            outputMixEnvironmentalReverb, (SLboolean) enabled, (SLmillibel) 0);
    // and even if environmental reverb was present, it might no longer be available
    if (SL_RESULT_SUCCESS != result) {
        return JNI_FALSE;
    }

    return JNI_TRUE;
}


// select the desired clip and play count, and enqueue the first buffer if idle
jboolean Java_com_example_nativeaudio_NativeAudio_selectClip(JNIEnv* env, jclass clazz, jint which,
        jint count)
{
    short *oldBuffer = nextBuffer;
    switch (which) {
    case 0:     // CLIP_NONE
        nextBuffer = (short *) NULL;
        nextSize = 0;
        break;
    case 1:     // CLIP_HELLO
        nextBuffer = (short *) hello;
        nextSize = sizeof(hello);
        break;
    case 2:     // CLIP_ANDROID
        nextBuffer = (short *) android;
        nextSize = sizeof(android);
        break;
    case 3:     // CLIP_SAWTOOTH
        nextBuffer = sawtoothBuffer;
        nextSize = sizeof(sawtoothBuffer);
        break;
    case 4:     // CLIP_PLAYBACK
        // we recorded at 16 kHz, but are playing buffers at 8 Khz, so do a primitive down-sample
        if (recorderSR == SL_SAMPLINGRATE_16) {
            unsigned i;
            for (i = 0; i < recorderSize; i += 2 * sizeof(short)) {
                recorderBuffer[i >> 2] = recorderBuffer[i >> 1];
            }
            recorderSR = SL_SAMPLINGRATE_8;
            recorderSize >>= 1;
        }
        nextBuffer = recorderBuffer;
        nextSize = recorderSize;
        break;
    default:
        nextBuffer = NULL;
        nextSize = 0;
        break;
    }
    nextCount = count;
    if (nextSize > 0) {
        // here we only enqueue one buffer because it is a long clip,
        // but for streaming playback we would typically enqueue at least 2 buffers to start
        SLresult result;
        result = (*bqPlayerBufferQueue)->Enqueue(bqPlayerBufferQueue, nextBuffer, nextSize);
        if (SL_RESULT_SUCCESS != result) {
            return JNI_FALSE;
        }
    }

    return JNI_TRUE;
}


// create asset audio player
jboolean Java_com_example_nativeaudio_NativeAudio_createAssetAudioPlayer(JNIEnv* env, jclass clazz,
        jobject assetManager, jstring filename)
{
    SLresult result;

    // convert Java string to UTF-8
    const jbyte *utf8 = (*env)->GetStringUTFChars(env, filename, NULL);
    assert(NULL != utf8);

    // use asset manager to open asset by filename
    AAssetManager* mgr = AAssetManager_fromJava(env, assetManager);
    assert(NULL != mgr);
    AAsset* asset = AAssetManager_open(mgr, (const char *) utf8, AASSET_MODE_UNKNOWN);

    // release the Java string and UTF-8
    (*env)->ReleaseStringUTFChars(env, filename, utf8);

    // the asset might not be found
    if (NULL == asset) {
        return JNI_FALSE;
    }

    // open asset as file descriptor
    off_t start, length;
    int fd = AAsset_openFileDescriptor(asset, &start, &length);
    assert(0 <= fd);
    AAsset_close(asset);

    // configure audio source
    SLDataLocator_AndroidFD loc_fd = {SL_DATALOCATOR_ANDROIDFD, fd, start, length};
    SLDataFormat_MIME format_mime = {SL_DATAFORMAT_MIME, NULL, SL_CONTAINERTYPE_UNSPECIFIED};
    SLDataSource audioSrc = {&loc_fd, &format_mime};

    // configure audio sink
    SLDataLocator_OutputMix loc_outmix = {SL_DATALOCATOR_OUTPUTMIX, outputMixObject};
    SLDataSink audioSnk = {&loc_outmix, NULL};

    // create audio player
    const SLInterfaceID ids[3] = {SL_IID_SEEK, SL_IID_MUTESOLO, SL_IID_VOLUME};
    const SLboolean req[3] = {SL_BOOLEAN_TRUE, SL_BOOLEAN_TRUE, SL_BOOLEAN_TRUE};
    result = (*engineEngine)->CreateAudioPlayer(engineEngine, &fdPlayerObject, &audioSrc, &audioSnk,
            3, ids, req);
    assert(SL_RESULT_SUCCESS == result);

    // realize the player
    result = (*fdPlayerObject)->Realize(fdPlayerObject, SL_BOOLEAN_FALSE);
    assert(SL_RESULT_SUCCESS == result);

    // get the play interface
    result = (*fdPlayerObject)->GetInterface(fdPlayerObject, SL_IID_PLAY, &fdPlayerPlay);
    assert(SL_RESULT_SUCCESS == result);

    // get the seek interface
    result = (*fdPlayerObject)->GetInterface(fdPlayerObject, SL_IID_SEEK, &fdPlayerSeek);
    assert(SL_RESULT_SUCCESS == result);

    // get the mute/solo interface
    result = (*fdPlayerObject)->GetInterface(fdPlayerObject, SL_IID_MUTESOLO, &fdPlayerMuteSolo);
    assert(SL_RESULT_SUCCESS == result);

    // get the volume interface
    result = (*fdPlayerObject)->GetInterface(fdPlayerObject, SL_IID_VOLUME, &fdPlayerVolume);
    assert(SL_RESULT_SUCCESS == result);

    // enable whole file looping
    result = (*fdPlayerSeek)->SetLoop(fdPlayerSeek, SL_BOOLEAN_TRUE, 0, SL_TIME_UNKNOWN);
    assert(SL_RESULT_SUCCESS == result);

    return JNI_TRUE;
}


// set the playing state for the asset audio player
void Java_com_example_nativeaudio_NativeAudio_setPlayingAssetAudioPlayer(JNIEnv* env,
        jclass clazz, jboolean isPlaying)
{
    SLresult result;

    // make sure the asset audio player was created
    if (NULL != fdPlayerPlay) {

        // set the player's state
        result = (*fdPlayerPlay)->SetPlayState(fdPlayerPlay, isPlaying ?
            SL_PLAYSTATE_PLAYING : SL_PLAYSTATE_PAUSED);
        assert(SL_RESULT_SUCCESS == result);

    }

}


// create audio recorder
jboolean Java_com_example_nativeaudio_NativeAudio_createAudioRecorder(JNIEnv* env, jclass clazz)
{
    SLresult result;

    // configure audio source
    SLDataLocator_IODevice loc_dev = {SL_DATALOCATOR_IODEVICE, SL_IODEVICE_AUDIOINPUT,
            SL_DEFAULTDEVICEID_AUDIOINPUT, NULL};
    SLDataSource audioSrc = {&loc_dev, NULL};

    // configure audio sink
    SLDataLocator_AndroidSimpleBufferQueue loc_bq = {SL_DATALOCATOR_ANDROIDSIMPLEBUFFERQUEUE, 2};
    SLDataFormat_PCM format_pcm = {SL_DATAFORMAT_PCM, 1, SL_SAMPLINGRATE_16,
        SL_PCMSAMPLEFORMAT_FIXED_16, SL_PCMSAMPLEFORMAT_FIXED_16,
        SL_SPEAKER_FRONT_CENTER, SL_BYTEORDER_LITTLEENDIAN};
    SLDataSink audioSnk = {&loc_bq, &format_pcm};

    // create audio recorder
    // (requires the RECORD_AUDIO permission)
    const SLInterfaceID id[1] = {SL_IID_ANDROIDSIMPLEBUFFERQUEUE};
    const SLboolean req[1] = {SL_BOOLEAN_TRUE};
    result = (*engineEngine)->CreateAudioRecorder(engineEngine, &recorderObject, &audioSrc,
            &audioSnk, 1, id, req);
    if (SL_RESULT_SUCCESS != result) {
        return JNI_FALSE;
    }

    // realize the audio recorder
    result = (*recorderObject)->Realize(recorderObject, SL_BOOLEAN_FALSE);
    if (SL_RESULT_SUCCESS != result) {
        return JNI_FALSE;
    }

    // get the record interface
    result = (*recorderObject)->GetInterface(recorderObject, SL_IID_RECORD, &recorderRecord);
    assert(SL_RESULT_SUCCESS == result);

    // get the buffer queue interface
    result = (*recorderObject)->GetInterface(recorderObject, SL_IID_ANDROIDSIMPLEBUFFERQUEUE,
            &recorderBufferQueue);
    assert(SL_RESULT_SUCCESS == result);

    // register callback on the buffer queue
    result = (*recorderBufferQueue)->RegisterCallback(recorderBufferQueue, bqRecorderCallback,
            NULL);
    assert(SL_RESULT_SUCCESS == result);

    return JNI_TRUE;
}


// set the recording state for the audio recorder
void Java_com_example_nativeaudio_NativeAudio_startRecording(JNIEnv* env, jclass clazz)
{
    SLresult result;

    // in case already recording, stop recording and clear buffer queue
    result = (*recorderRecord)->SetRecordState(recorderRecord, SL_RECORDSTATE_STOPPED);
    assert(SL_RESULT_SUCCESS == result);
    result = (*recorderBufferQueue)->Clear(recorderBufferQueue);
    assert(SL_RESULT_SUCCESS == result);

    // the buffer is not valid for playback yet
    recorderSize = 0;

    // enqueue an empty buffer to be filled by the recorder
    // (for streaming recording, we would enqueue at least 2 empty buffers to start things off)
    result = (*recorderBufferQueue)->Enqueue(recorderBufferQueue, recorderBuffer,
            RECORDER_FRAMES * sizeof(short));
    // the most likely other result is SL_RESULT_BUFFER_INSUFFICIENT,
    // which for this code example would indicate a programming error
    assert(SL_RESULT_SUCCESS == result);

    // start recording
    result = (*recorderRecord)->SetRecordState(recorderRecord, SL_RECORDSTATE_RECORDING);
    assert(SL_RESULT_SUCCESS == result);

}


// shut down the native audio system
void Java_com_example_nativeaudio_NativeAudio_shutdown(JNIEnv* env, jclass clazz)
{

    // destroy buffer queue audio player object, and invalidate all associated interfaces
    if (bqPlayerObject != NULL) {
        (*bqPlayerObject)->Destroy(bqPlayerObject);
        bqPlayerObject = NULL;
        bqPlayerPlay = NULL;
        bqPlayerBufferQueue = NULL;
        bqPlayerEffectSend = NULL;
        bqPlayerMuteSolo = NULL;
        bqPlayerVolume = NULL;
    }

    // destroy file descriptor audio player object, and invalidate all associated interfaces
    if (fdPlayerObject != NULL) {
        (*fdPlayerObject)->Destroy(fdPlayerObject);
        fdPlayerObject = NULL;
        fdPlayerPlay = NULL;
        fdPlayerSeek = NULL;
        fdPlayerMuteSolo = NULL;
        fdPlayerVolume = NULL;
    }

    // destroy URI audio player object, and invalidate all associated interfaces
    if (uriPlayerObject != NULL) {
        (*uriPlayerObject)->Destroy(uriPlayerObject);
        uriPlayerObject = NULL;
        uriPlayerPlay = NULL;
        uriPlayerSeek = NULL;
        uriPlayerMuteSolo = NULL;
        uriPlayerVolume = NULL;
    }

    // destroy audio recorder object, and invalidate all associated interfaces
    if (recorderObject != NULL) {
        (*recorderObject)->Destroy(recorderObject);
        recorderObject = NULL;
        recorderRecord = NULL;
        recorderBufferQueue = NULL;
    }

    // destroy output mix object, and invalidate all associated interfaces
    if (outputMixObject != NULL) {
        (*outputMixObject)->Destroy(outputMixObject);
        outputMixObject = NULL;
        outputMixEnvironmentalReverb = NULL;
    }

    // destroy engine object, and invalidate all associated interfaces
    if (engineObject != NULL) {
        (*engineObject)->Destroy(engineObject);
        engineObject = NULL;
        engineEngine = NULL;
    }

}