| #!/usr/bin/env python |
| # |
| # Copyright (C) 2013 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| """stack symbolizes native crash dumps.""" |
| |
| import re |
| import symbol |
| import unittest |
| |
| import example_crashes |
| |
| def ConvertTrace(lines): |
| tracer = TraceConverter() |
| print "Reading symbols from", symbol.SYMBOLS_DIR |
| tracer.ConvertTrace(lines) |
| |
| class TraceConverter: |
| process_info_line = re.compile("(pid: [0-9]+, tid: [0-9]+.*)") |
| abi_line = re.compile("(ABI: \'(.*)\')") |
| revision_line = re.compile("(Revision: \'(.*)\')") |
| signal_line = re.compile("(signal [0-9]+ \(.*\).*)") |
| abort_message_line = re.compile("(Abort message: '.*')") |
| thread_line = re.compile("(.*)(\-\-\- ){15}\-\-\-") |
| dalvik_jni_thread_line = re.compile("(\".*\" prio=[0-9]+ tid=[0-9]+ NATIVE.*)") |
| dalvik_native_thread_line = re.compile("(\".*\" sysTid=[0-9]+ nice=[0-9]+.*)") |
| register_line = re.compile("$a") |
| trace_line = re.compile("$a") |
| value_line = re.compile("$a") |
| code_line = re.compile("$a") |
| trace_lines = [] |
| value_lines = [] |
| last_frame = -1 |
| width = "{8}" |
| |
| def __init__(self): |
| self.UpdateAbiRegexes() |
| |
| register_names = { |
| "arm": "r0|r1|r2|r3|r4|r5|r6|r7|r8|r9|sl|fp|ip|sp|lr|pc|cpsr", |
| "arm64": "x0|x1|x2|x3|x4|x5|x6|x7|x8|x9|x10|x11|x12|x13|x14|x15|x16|x17|x18|x19|x20|x21|x22|x23|x24|x25|x26|x27|x28|x29|x30|sp|pc|pstate", |
| "mips": "zr|at|v0|v1|a0|a1|a2|a3|t0|t1|t2|t3|t4|t5|t6|t7|s0|s1|s2|s3|s4|s5|s6|s7|t8|t9|k0|k1|gp|sp|s8|ra|hi|lo|bva|epc", |
| "x86": "eax|ebx|ecx|edx|esi|edi|x?cs|x?ds|x?es|x?fs|x?ss|eip|ebp|esp|flags", |
| "x86_64": "rax|rbx|rcx|rdx|rsi|rdi|r8|r9|r10|r11|r12|r13|r14|r15|cs|ss|rip|rbp|rsp|eflags", |
| } |
| |
| def UpdateAbiRegexes(self): |
| if symbol.ARCH == "arm64" or symbol.ARCH == "mips64" or symbol.ARCH == "x86_64": |
| self.width = "{16}" |
| else: |
| self.width = "{8}" |
| |
| self.register_line = re.compile("(([ ]*\\b(" + self.register_names[symbol.ARCH] + ")\\b +[0-9a-f]" + self.width + "){2,5})") |
| |
| # Note that both trace and value line matching allow for variable amounts of |
| # whitespace (e.g. \t). This is because the we want to allow for the stack |
| # tool to operate on AndroidFeedback provided system logs. AndroidFeedback |
| # strips out double spaces that are found in tombsone files and logcat output. |
| # |
| # Examples of matched trace lines include lines from tombstone files like: |
| # #00 pc 001cf42e /data/data/com.my.project/lib/libmyproject.so |
| # |
| # Or lines from AndroidFeedback crash report system logs like: |
| # 03-25 00:51:05.520 I/DEBUG ( 65): #00 pc 001cf42e /data/data/com.my.project/lib/libmyproject.so |
| # Please note the spacing differences. |
| self.trace_line = re.compile("(.*)\#([0-9]+)[ \t]+(..)[ \t]+([0-9a-f]" + self.width + ")[ \t]+([^\r\n \t]*)( \((.*)\))?") # pylint: disable-msg=C6310 |
| # Examples of matched value lines include: |
| # bea4170c 8018e4e9 /data/data/com.my.project/lib/libmyproject.so |
| # bea4170c 8018e4e9 /data/data/com.my.project/lib/libmyproject.so (symbol) |
| # 03-25 00:51:05.530 I/DEBUG ( 65): bea4170c 8018e4e9 /data/data/com.my.project/lib/libmyproject.so |
| # Again, note the spacing differences. |
| self.value_line = re.compile("(.*)([0-9a-f]" + self.width + ")[ \t]+([0-9a-f]" + self.width + ")[ \t]+([^\r\n \t]*)( \((.*)\))?") |
| # Lines from 'code around' sections of the output will be matched before |
| # value lines because otheriwse the 'code around' sections will be confused as |
| # value lines. |
| # |
| # Examples include: |
| # 801cf40c ffffc4cc 00b2f2c5 00b2f1c7 00c1e1a8 |
| # 03-25 00:51:05.530 I/DEBUG ( 65): 801cf40c ffffc4cc 00b2f2c5 00b2f1c7 00c1e1a8 |
| self.code_line = re.compile("(.*)[ \t]*[a-f0-9]" + self.width + |
| "[ \t]*[a-f0-9]" + self.width + |
| "[ \t]*[a-f0-9]" + self.width + |
| "[ \t]*[a-f0-9]" + self.width + |
| "[ \t]*[a-f0-9]" + self.width + |
| "[ \t]*[ \r\n]") # pylint: disable-msg=C6310 |
| |
| def CleanLine(self, ln): |
| # AndroidFeedback adds zero width spaces into its crash reports. These |
| # should be removed or the regular expresssions will fail to match. |
| return unicode(ln, errors='ignore') |
| |
| def PrintTraceLines(self, trace_lines): |
| """Print back trace.""" |
| maxlen = max(map(lambda tl: len(tl[1]), trace_lines)) |
| spacing = "" |
| if symbol.ARCH == "arm64" or symbol.ARCH == "mips64" or symbol.ARCH == "x86_64": |
| spacing = " " |
| print |
| print "Stack Trace:" |
| print " RELADDR " + spacing + "FUNCTION".ljust(maxlen) + " FILE:LINE" |
| for tl in self.trace_lines: |
| (addr, symbol_with_offset, location) = tl |
| print " %8s %s %s" % (addr, symbol_with_offset.ljust(maxlen), location) |
| return |
| |
| def PrintValueLines(self, value_lines): |
| """Print stack data values.""" |
| maxlen = max(map(lambda tl: len(tl[2]), self.value_lines)) |
| print |
| print "Stack Data:" |
| print " ADDR VALUE " + "FUNCTION".ljust(maxlen) + " FILE:LINE" |
| for vl in self.value_lines: |
| (addr, value, symbol_with_offset, location) = vl |
| print " %8s %8s %s %s" % (addr, value, symbol_with_offset.ljust(maxlen), location) |
| return |
| |
| def PrintOutput(self, trace_lines, value_lines): |
| if self.trace_lines: |
| self.PrintTraceLines(self.trace_lines) |
| if self.value_lines: |
| self.PrintValueLines(self.value_lines) |
| |
| def PrintDivider(self): |
| print |
| print "-----------------------------------------------------\n" |
| |
| def ConvertTrace(self, lines): |
| lines = map(self.CleanLine, lines) |
| for line in lines: |
| self.ProcessLine(line) |
| self.PrintOutput(self.trace_lines, self.value_lines) |
| |
| def ProcessLine(self, line): |
| ret = False |
| process_header = self.process_info_line.search(line) |
| signal_header = self.signal_line.search(line) |
| abort_message_header = self.abort_message_line.search(line) |
| thread_header = self.thread_line.search(line) |
| register_header = self.register_line.search(line) |
| abi_header = self.abi_line.search(line) |
| revision_header = self.revision_line.search(line) |
| dalvik_jni_thread_header = self.dalvik_jni_thread_line.search(line) |
| dalvik_native_thread_header = self.dalvik_native_thread_line.search(line) |
| if process_header or signal_header or abort_message_header or thread_header or abi_header or \ |
| register_header or dalvik_jni_thread_header or dalvik_native_thread_header or revision_header: |
| ret = True |
| if self.trace_lines or self.value_lines: |
| self.PrintOutput(self.trace_lines, self.value_lines) |
| self.PrintDivider() |
| self.trace_lines = [] |
| self.value_lines = [] |
| self.last_frame = -1 |
| if process_header: |
| print process_header.group(1) |
| if signal_header: |
| print signal_header.group(1) |
| if abort_message_header: |
| print abort_message_header.group(1) |
| if register_header: |
| print register_header.group(1) |
| if thread_header: |
| print thread_header.group(1) |
| if dalvik_jni_thread_header: |
| print dalvik_jni_thread_header.group(1) |
| if dalvik_native_thread_header: |
| print dalvik_native_thread_header.group(1) |
| if revision_header: |
| print revision_header.group(1) |
| if abi_header: |
| print abi_header.group(1) |
| symbol.ARCH = abi_header.group(2) |
| self.UpdateAbiRegexes() |
| return ret |
| if self.trace_line.match(line): |
| ret = True |
| match = self.trace_line.match(line) |
| (unused_0, frame, unused_1, |
| code_addr, area, symbol_present, symbol_name) = match.groups() |
| |
| if frame <= self.last_frame and (self.trace_lines or self.value_lines): |
| self.PrintOutput(self.trace_lines, self.value_lines) |
| self.PrintDivider() |
| self.trace_lines = [] |
| self.value_lines = [] |
| self.last_frame = frame |
| |
| if area == "<unknown>" or area == "[heap]" or area == "[stack]": |
| self.trace_lines.append((code_addr, "", area)) |
| else: |
| # If a calls b which further calls c and c is inlined to b, we want to |
| # display "a -> b -> c" in the stack trace instead of just "a -> c" |
| info = symbol.SymbolInformation(area, code_addr) |
| nest_count = len(info) - 1 |
| for (source_symbol, source_location, object_symbol_with_offset) in info: |
| if not source_symbol: |
| if symbol_present: |
| source_symbol = symbol.CallCppFilt(symbol_name) |
| else: |
| source_symbol = "<unknown>" |
| if not source_location: |
| source_location = area |
| if nest_count > 0: |
| nest_count = nest_count - 1 |
| arrow = "v------>" |
| if symbol.ARCH == "arm64" or symbol.ARCH == "mips64" or symbol.ARCH == "x86_64": |
| arrow = "v-------------->" |
| self.trace_lines.append((arrow, source_symbol, source_location)) |
| else: |
| if not object_symbol_with_offset: |
| object_symbol_with_offset = source_symbol |
| self.trace_lines.append((code_addr, |
| object_symbol_with_offset, |
| source_location)) |
| if self.code_line.match(line): |
| # Code lines should be ignored. If this were exluded the 'code around' |
| # sections would trigger value_line matches. |
| return ret |
| if self.value_line.match(line): |
| ret = True |
| match = self.value_line.match(line) |
| (unused_, addr, value, area, symbol_present, symbol_name) = match.groups() |
| if area == "<unknown>" or area == "[heap]" or area == "[stack]" or not area: |
| self.value_lines.append((addr, value, "", area)) |
| else: |
| info = symbol.SymbolInformation(area, value) |
| (source_symbol, source_location, object_symbol_with_offset) = info.pop() |
| if not source_symbol: |
| if symbol_present: |
| source_symbol = symbol.CallCppFilt(symbol_name) |
| else: |
| source_symbol = "<unknown>" |
| if not source_location: |
| source_location = area |
| if not object_symbol_with_offset: |
| object_symbol_with_offset = source_symbol |
| self.value_lines.append((addr, |
| value, |
| object_symbol_with_offset, |
| source_location)) |
| |
| return ret |
| |
| |
| class RegisterPatternTests(unittest.TestCase): |
| def assert_register_matches(self, abi, example_crash, stupid_pattern): |
| tc = TraceConverter() |
| symbol.ARCH = abi |
| tc.UpdateAbiRegexes() |
| for line in example_crash.split('\n'): |
| is_register = (re.search(stupid_pattern, line) is not None) |
| matched = (tc.register_line.search(line) is not None) |
| self.assertEquals(matched, is_register, line) |
| |
| def test_arm_registers(self): |
| self.assert_register_matches("arm", example_crashes.arm, '\\b(r0|r4|r8|ip)\\b') |
| |
| def test_arm64_registers(self): |
| self.assert_register_matches("arm64", example_crashes.arm64, '\\b(x0|x4|x8|x12|x16|x20|x24|x28|sp)\\b') |
| |
| def test_mips_registers(self): |
| self.assert_register_matches("mips", example_crashes.mips, '\\b(zr|a0|t0|t4|s0|s4|t8|gp|hi)\\b') |
| |
| def test_x86_registers(self): |
| self.assert_register_matches("x86", example_crashes.x86, '\\b(eax|esi|xcs|eip)\\b') |
| |
| def test_x86_64_registers(self): |
| self.assert_register_matches("x86_64", example_crashes.x86_64, '\\b(rax|rsi|r8|r12|cs|rip)\\b') |
| |
| |
| if __name__ == '__main__': |
| unittest.main() |
