blob: 1f87890778f95bdb1d82a96286893590a345841e [file] [log] [blame]
/*
* Copyright (C) 2011 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* $Id: db_utilities_poly.h,v 1.2 2010/09/03 12:00:11 bsouthall Exp $ */
#ifndef DB_UTILITIES_POLY
#define DB_UTILITIES_POLY
#include "db_utilities.h"
/*****************************************************************
* Lean and mean begins here *
*****************************************************************/
/*!
* \defgroup LMPolynomial (LM) Polynomial utilities (solvers, arithmetic, evaluation, etc.)
*/
/*\{*/
/*!
In debug mode closed form quadratic solving takes on the order of 15 microseconds
while eig of the companion matrix takes about 1.1 milliseconds
Speed-optimized code in release mode solves a quadratic in 0.3 microseconds on 450MHz
*/
inline void db_SolveQuadratic(double *roots,int *nr_roots,double a,double b,double c)
{
double rs,srs,q;
/*For non-degenerate quadratics
[5 mult 2 add 1 sqrt=7flops 1func]*/
if(a==0.0)
{
if(b==0.0) *nr_roots=0;
else
{
roots[0]= -c/b;
*nr_roots=1;
}
}
else
{
rs=b*b-4.0*a*c;
if(rs>=0.0)
{
*nr_roots=2;
srs=sqrt(rs);
q= -0.5*(b+db_sign(b)*srs);
roots[0]=q/a;
/*If b is zero db_sign(b) returns 1,
so q is only zero when b=0 and c=0*/
if(q==0.0) *nr_roots=1;
else roots[1]=c/q;
}
else *nr_roots=0;
}
}
/*!
In debug mode closed form cubic solving takes on the order of 45 microseconds
while eig of the companion matrix takes about 1.3 milliseconds
Speed-optimized code in release mode solves a cubic in 1.5 microseconds on 450MHz
For a non-degenerate cubic with two roots, the first root is the single root and
the second root is the double root
*/
DB_API void db_SolveCubic(double *roots,int *nr_roots,double a,double b,double c,double d);
/*!
In debug mode closed form quartic solving takes on the order of 0.1 milliseconds
while eig of the companion matrix takes about 1.5 milliseconds
Speed-optimized code in release mode solves a quartic in 2.6 microseconds on 450MHz*/
DB_API void db_SolveQuartic(double *roots,int *nr_roots,double a,double b,double c,double d,double e);
/*!
Quartic solving where a solution is forced when splitting into quadratics, which
can be good if the quartic is sometimes in fact a quadratic, such as in absolute orientation
when the data is planar*/
DB_API void db_SolveQuarticForced(double *roots,int *nr_roots,double a,double b,double c,double d,double e);
inline double db_PolyEval1(const double p[2],double x)
{
return(p[0]+x*p[1]);
}
inline void db_MultiplyPoly1_1(double *d,const double *a,const double *b)
{
double a0,a1;
double b0,b1;
a0=a[0];a1=a[1];
b0=b[0];b1=b[1];
d[0]=a0*b0;
d[1]=a0*b1+a1*b0;
d[2]= a1*b1;
}
inline void db_MultiplyPoly0_2(double *d,const double *a,const double *b)
{
double a0;
double b0,b1,b2;
a0=a[0];
b0=b[0];b1=b[1];b2=b[2];
d[0]=a0*b0;
d[1]=a0*b1;
d[2]=a0*b2;
}
inline void db_MultiplyPoly1_2(double *d,const double *a,const double *b)
{
double a0,a1;
double b0,b1,b2;
a0=a[0];a1=a[1];
b0=b[0];b1=b[1];b2=b[2];
d[0]=a0*b0;
d[1]=a0*b1+a1*b0;
d[2]=a0*b2+a1*b1;
d[3]= a1*b2;
}
inline void db_MultiplyPoly1_3(double *d,const double *a,const double *b)
{
double a0,a1;
double b0,b1,b2,b3;
a0=a[0];a1=a[1];
b0=b[0];b1=b[1];b2=b[2];b3=b[3];
d[0]=a0*b0;
d[1]=a0*b1+a1*b0;
d[2]=a0*b2+a1*b1;
d[3]=a0*b3+a1*b2;
d[4]= a1*b3;
}
/*!
Multiply d=a*b where a is one degree and b is two degree*/
inline void db_AddPolyProduct0_1(double *d,const double *a,const double *b)
{
double a0;
double b0,b1;
a0=a[0];
b0=b[0];b1=b[1];
d[0]+=a0*b0;
d[1]+=a0*b1;
}
inline void db_AddPolyProduct0_2(double *d,const double *a,const double *b)
{
double a0;
double b0,b1,b2;
a0=a[0];
b0=b[0];b1=b[1];b2=b[2];
d[0]+=a0*b0;
d[1]+=a0*b1;
d[2]+=a0*b2;
}
/*!
Multiply d=a*b where a is one degree and b is two degree*/
inline void db_SubtractPolyProduct0_0(double *d,const double *a,const double *b)
{
double a0;
double b0;
a0=a[0];
b0=b[0];
d[0]-=a0*b0;
}
inline void db_SubtractPolyProduct0_1(double *d,const double *a,const double *b)
{
double a0;
double b0,b1;
a0=a[0];
b0=b[0];b1=b[1];
d[0]-=a0*b0;
d[1]-=a0*b1;
}
inline void db_SubtractPolyProduct0_2(double *d,const double *a,const double *b)
{
double a0;
double b0,b1,b2;
a0=a[0];
b0=b[0];b1=b[1];b2=b[2];
d[0]-=a0*b0;
d[1]-=a0*b1;
d[2]-=a0*b2;
}
inline void db_SubtractPolyProduct1_3(double *d,const double *a,const double *b)
{
double a0,a1;
double b0,b1,b2,b3;
a0=a[0];a1=a[1];
b0=b[0];b1=b[1];b2=b[2];b3=b[3];
d[0]-=a0*b0;
d[1]-=a0*b1+a1*b0;
d[2]-=a0*b2+a1*b1;
d[3]-=a0*b3+a1*b2;
d[4]-= a1*b3;
}
inline void db_CharacteristicPolynomial4x4(double p[5],const double A[16])
{
/*All two by two determinants of the first two rows*/
double two01[3],two02[3],two03[3],two12[3],two13[3],two23[3];
/*Polynomials representing third and fourth row of A*/
double P0[2],P1[2],P2[2],P3[2];
double P4[2],P5[2],P6[2],P7[2];
/*All three by three determinants of the first three rows*/
double neg_three0[4],neg_three1[4],three2[4],three3[4];
/*Compute 2x2 determinants*/
two01[0]=A[0]*A[5]-A[1]*A[4];
two01[1]= -(A[0]+A[5]);
two01[2]=1.0;
two02[0]=A[0]*A[6]-A[2]*A[4];
two02[1]= -A[6];
two03[0]=A[0]*A[7]-A[3]*A[4];
two03[1]= -A[7];
two12[0]=A[1]*A[6]-A[2]*A[5];
two12[1]=A[2];
two13[0]=A[1]*A[7]-A[3]*A[5];
two13[1]=A[3];
two23[0]=A[2]*A[7]-A[3]*A[6];
P0[0]=A[8];
P1[0]=A[9];
P2[0]=A[10];P2[1]= -1.0;
P3[0]=A[11];
P4[0]=A[12];
P5[0]=A[13];
P6[0]=A[14];
P7[0]=A[15];P7[1]= -1.0;
/*Compute 3x3 determinants.Note that the highest
degree polynomial goes first and the smaller ones
are added or subtracted from it*/
db_MultiplyPoly1_1( neg_three0,P2,two13);
db_SubtractPolyProduct0_0(neg_three0,P1,two23);
db_SubtractPolyProduct0_1(neg_three0,P3,two12);
db_MultiplyPoly1_1( neg_three1,P2,two03);
db_SubtractPolyProduct0_1(neg_three1,P3,two02);
db_SubtractPolyProduct0_0(neg_three1,P0,two23);
db_MultiplyPoly0_2( three2,P3,two01);
db_AddPolyProduct0_1( three2,P0,two13);
db_SubtractPolyProduct0_1(three2,P1,two03);
db_MultiplyPoly1_2( three3,P2,two01);
db_AddPolyProduct0_1( three3,P0,two12);
db_SubtractPolyProduct0_1(three3,P1,two02);
/*Compute 4x4 determinants*/
db_MultiplyPoly1_3( p,P7,three3);
db_AddPolyProduct0_2( p,P4,neg_three0);
db_SubtractPolyProduct0_2(p,P5,neg_three1);
db_SubtractPolyProduct0_2(p,P6,three2);
}
inline void db_RealEigenvalues4x4(double lambda[4],int *nr_roots,const double A[16],int forced=0)
{
double p[5];
db_CharacteristicPolynomial4x4(p,A);
if(forced) db_SolveQuarticForced(lambda,nr_roots,p[4],p[3],p[2],p[1],p[0]);
else db_SolveQuartic(lambda,nr_roots,p[4],p[3],p[2],p[1],p[0]);
}
/*!
Compute the unit norm eigenvector v of the matrix A corresponding
to the eigenvalue lambda
[96mult 60add 1sqrt=156flops 1sqrt]*/
inline void db_EigenVector4x4(double v[4],double lambda,const double A[16])
{
double a0,a5,a10,a15;
double d01,d02,d03,d12,d13,d23;
double e01,e02,e03,e12,e13,e23;
double C[16],n0,n1,n2,n3,m;
/*Compute diagonal
[4add=4flops]*/
a0=A[0]-lambda;
a5=A[5]-lambda;
a10=A[10]-lambda;
a15=A[15]-lambda;
/*Compute 2x2 determinants of rows 1,2 and 3,4
[24mult 12add=36flops]*/
d01=a0*a5 -A[1]*A[4];
d02=a0*A[6] -A[2]*A[4];
d03=a0*A[7] -A[3]*A[4];
d12=A[1]*A[6]-A[2]*a5;
d13=A[1]*A[7]-A[3]*a5;
d23=A[2]*A[7]-A[3]*A[6];
e01=A[8]*A[13]-A[9] *A[12];
e02=A[8]*A[14]-a10 *A[12];
e03=A[8]*a15 -A[11]*A[12];
e12=A[9]*A[14]-a10 *A[13];
e13=A[9]*a15 -A[11]*A[13];
e23=a10 *a15 -A[11]*A[14];
/*Compute matrix of cofactors
[48mult 32 add=80flops*/
C[0]= (a5 *e23-A[6]*e13+A[7]*e12);
C[1]= -(A[4]*e23-A[6]*e03+A[7]*e02);
C[2]= (A[4]*e13-a5 *e03+A[7]*e01);
C[3]= -(A[4]*e12-a5 *e02+A[6]*e01);
C[4]= -(A[1]*e23-A[2]*e13+A[3]*e12);
C[5]= (a0 *e23-A[2]*e03+A[3]*e02);
C[6]= -(a0 *e13-A[1]*e03+A[3]*e01);
C[7]= (a0 *e12-A[1]*e02+A[2]*e01);
C[8]= (A[13]*d23-A[14]*d13+a15 *d12);
C[9]= -(A[12]*d23-A[14]*d03+a15 *d02);
C[10]= (A[12]*d13-A[13]*d03+a15 *d01);
C[11]= -(A[12]*d12-A[13]*d02+A[14]*d01);
C[12]= -(A[9]*d23-a10 *d13+A[11]*d12);
C[13]= (A[8]*d23-a10 *d03+A[11]*d02);
C[14]= -(A[8]*d13-A[9]*d03+A[11]*d01);
C[15]= (A[8]*d12-A[9]*d02+a10 *d01);
/*Compute square sums of rows
[16mult 12add=28flops*/
n0=db_sqr(C[0]) +db_sqr(C[1]) +db_sqr(C[2]) +db_sqr(C[3]);
n1=db_sqr(C[4]) +db_sqr(C[5]) +db_sqr(C[6]) +db_sqr(C[7]);
n2=db_sqr(C[8]) +db_sqr(C[9]) +db_sqr(C[10])+db_sqr(C[11]);
n3=db_sqr(C[12])+db_sqr(C[13])+db_sqr(C[14])+db_sqr(C[15]);
/*Take the largest norm row and normalize
[4mult 1 sqrt=4flops 1sqrt]*/
if(n0>=n1 && n0>=n2 && n0>=n3)
{
m=db_SafeReciprocal(sqrt(n0));
db_MultiplyScalarCopy4(v,C,m);
}
else if(n1>=n2 && n1>=n3)
{
m=db_SafeReciprocal(sqrt(n1));
db_MultiplyScalarCopy4(v,&(C[4]),m);
}
else if(n2>=n3)
{
m=db_SafeReciprocal(sqrt(n2));
db_MultiplyScalarCopy4(v,&(C[8]),m);
}
else
{
m=db_SafeReciprocal(sqrt(n3));
db_MultiplyScalarCopy4(v,&(C[12]),m);
}
}
/*\}*/
#endif /* DB_UTILITIES_POLY */