| #!/bin/bash |
| # Quick semi-auto file to build Windows SDK tools. |
| # |
| # Limitations and requirements: |
| # - Expects the emulator has been built first, will pick it up from prebuilt. |
| # - Run in Cygwin |
| # - Expects to have one of the existing SDK (Darwin or Linux) to build the Windows one |
| # - Needs Cygwin packages: autoconf, bison, curl, flex, gcc, g++, git, |
| # gnupg, make, mingw-zlib, python, zip, unzip |
| # - Must NOT have cygwin package readline (its GPL license might taint the SDK if |
| # it gets compiled in) |
| # - Does not need a Java Development Kit or any other tools outside of cygwin. |
| # - If you think you may have Windows versions of tools (e.g. make) installed, it may |
| # reduce confusion levels to 'export PATH=/usr/bin' |
| |
| set -e # Fail this script as soon as a command fails -- fail early, fail fast |
| |
| # Set to 1 to force removal of old unzipped SDK. Only disable for debugging, as it |
| # will make some rm/mv commands to fail. |
| FORCE="1" |
| |
| PROG_NAME="$0" |
| SDK_ZIP="$1" |
| DIST_DIR="$2" |
| TEMP_DIR="$3" |
| [ -z "$TEMP_DIR" ] && TEMP_DIR=${TMP:-/tmp} |
| |
| function die() { |
| echo "Error:" $* |
| echo "Aborting" |
| exit 1 |
| } |
| |
| function usage() { |
| local NAME |
| NAME=`basename ${PROG_NAME}` |
| echo "Usage: ${NAME} linux_or_mac_sdk.zip output_dir [temp_dir]" |
| echo "If temp_dir is not given, \$TMP is used. If that's missing, /tmp is used." |
| status |
| exit 2 |
| } |
| |
| function status() { |
| echo "Current values:" |
| echo "- Input SDK: ${SDK_ZIP:-missing}" |
| echo "- Output dir: ${DIST_DIR:-missing}" |
| echo "- Temp dir: ${TEMP_DIR:-missing}" |
| } |
| |
| function check() { |
| [ -f "$SDK_ZIP" ] || usage |
| [ -d "$DIST_DIR" ] || usage |
| |
| # Use the BUILD_ID as SDK_NUMBER if defined, otherwise try to get it from the |
| # provided zip filename. |
| if [ -f config/build_id.make ]; then |
| BUILD_ID=`cat config/build_id.make | sed -n '/BUILD_ID=/s/^[^=]\+=\(.*\)$/\1/p'` |
| [ -n "$BUILD_ID" ] && SDK_NUMBER="$BUILD_ID" |
| fi |
| if [ -z "$SDK_NUMBER" ]; then |
| # Look for a pattern like "anything_sdknumber.extension" |
| # The pattern is now "any-thing_sdknumber_anything-else.extension" |
| # |
| # The bottom line is that the SDK number is whatever is enclosed by |
| # the LAST couple of underscores. You can have underscores *before* the |
| # SDK number if you want, but not after, e.g these are valid: |
| # android_sdk_4242_platform.zip or blah_42_.zip |
| # |
| # Note that the root directory name in the zip must match the zip |
| # name, too, so there's no point just changing the zip name to match |
| # the above format. |
| # |
| # SDK_NUMBER will be empty if nothing matched. |
| filename=`basename "$SDK_ZIP"` |
| SDK_NUMBER=`echo $filename | sed -n 's/^.*_\([^_./]\+\)_[^_.]*\..*$/\1/p'` |
| fi |
| |
| [ -n "$SDK_NUMBER" ] || die "Failed to extract the SDK number from $SDK_ZIP. Check its format." |
| |
| [ $OSTYPE == "cygwin" ] || die "This expects to run under Cygwin" |
| [ -e `which zip` ] || die "Please install 'zip' package in Cygwin" |
| [ -f "build/envsetup.sh" ] || die "Please run this from the 'android' directory" |
| |
| echo "Using SDK ${SDK_NUMBER}" |
| } |
| |
| function build() { |
| |
| echo |
| echo "Building..." |
| [ -n "$MAKE_OPT" ] && echo "Make options: $MAKE_OPT" |
| . build/envsetup.sh |
| make -j 4 emulator || die "Build failed" |
| # Disable parallel build: it generates "permission denied" issues when |
| # multiple "ar.exe" are running in parallel. |
| make aapt adb aidl \ |
| prebuilt \ |
| dexdump dmtracedump \ |
| fastboot \ |
| hprof-conv \ |
| mksdcard \ |
| sdklauncher sqlite3 \ |
| zipalign \ |
| || die "Build failed" |
| } |
| |
| function package() { |
| echo |
| echo "Packaging..." |
| DEST_NAME="android-sdk_${SDK_NUMBER}_windows" |
| DEST_NAME_ZIP="${DEST_NAME}.zip" |
| |
| TEMP_SDK_DIR="$TEMP_DIR/$DEST_NAME" |
| |
| # Unzip current linux/mac SDK and rename using the windows name |
| if [[ -n "$FORCE" || ! -d "$TEMP_SDK_DIR" ]]; then |
| [ -e "$TEMP_SDK_DIR" ] && rm -rfv "$TEMP_SDK_DIR" # cleanup dest first if exists |
| UNZIPPED=`basename "$SDK_ZIP"` |
| UNZIPPED="$TEMP_DIR/${UNZIPPED/.zip/}" |
| [ -e "$UNZIPPED" ] && rm -rfv "$UNZIPPED" # cleanup unzip dir (if exists) |
| unzip "$SDK_ZIP" -d "$TEMP_DIR" |
| mv -v "$UNZIPPED" "$TEMP_SDK_DIR" |
| fi |
| |
| # Assert that the package contains only one platform |
| PLATFORMS="$TEMP_SDK_DIR/platforms" |
| THE_PLATFORM=`echo $PLATFORMS/*` |
| PLATFORM_TOOLS=$THE_PLATFORM/tools |
| echo "Platform found: " $THE_PLATFORM |
| [[ -d "$THE_PLATFORM" ]] || die \ |
| "Error: One platform was expected in $SDK_ZIP. " \ |
| "Instead found " $THE_PLATFORM |
| [[ -d "$PLATFORM_TOOLS" ]] || die "Missing folder $PLATFORM_TOOLS." |
| |
| # Package USB Driver |
| if type package_usb_driver 2>&1 | grep -q function ; then |
| package_usb_driver $TEMP_SDK_DIR |
| fi |
| |
| # Remove obsolete stuff from tools & platform |
| TOOLS="$TEMP_SDK_DIR/tools" |
| LIB="$TEMP_SDK_DIR/tools/lib" |
| rm -v "$TOOLS"/{adb,android,apkbuilder,ddms,dmtracedump,draw9patch,emulator} |
| rm -v "$TOOLS"/{hierarchyviewer,hprof-conv,layoutopt,mksdcard,sqlite3,traceview,zipalign} |
| rm -v "$LIB"/*/swt.jar |
| rm -v "$PLATFORM_TOOLS"/{aapt,aidl,dx,dexdump} |
| |
| # Copy all the new stuff in tools |
| # Note: some tools are first copied here and then moved in platforms/<name>/tools/ |
| cp -v out/host/windows-x86/bin/*.{exe,dll} "$TOOLS"/ |
| mkdir -pv "$LIB"/x86 |
| cp -v prebuilt/windows/swt/swt.jar "$LIB"/x86/ |
| mkdir -pv "$LIB"/x86_64 |
| cp -v prebuilt/windows-x86_64/swt/swt.jar "$LIB"/x86_64/ |
| |
| # Move the SDK Setup (aka sdklauncher) to the root of the SDK (it was copied in tools above) |
| mv "$TOOLS/sdklauncher.exe" "$TEMP_SDK_DIR/SDK Setup.exe" |
| |
| # If you want the emulator NOTICE in the tools dir, uncomment the following line: |
| # cp -v external/qemu/NOTICE "$TOOLS"/emulator_NOTICE.txt |
| |
| # We currently need libz from MinGW for aapt |
| cp -v /cygdrive/c/cygwin/bin/mgwz.dll "$TOOLS"/ |
| |
| # Update a bunch of bat files |
| cp -v sdk/apkbuilder/etc/apkbuilder.bat "$TOOLS"/ |
| cp -v sdk/ddms/app/etc/ddms.bat "$TOOLS"/ |
| cp -v sdk/traceview/etc/traceview.bat "$TOOLS"/ |
| cp -v sdk/hierarchyviewer/etc/hierarchyviewer.bat "$TOOLS"/ |
| cp -v sdk/layoutopt/app/etc/layoutopt.bat "$TOOLS"/ |
| cp -v sdk/draw9patch/etc/draw9patch.bat "$TOOLS"/ |
| cp -v sdk/sdkmanager/app/etc/android.bat "$TOOLS"/ |
| |
| # Put the JetCreator tools, content and docs (not available in the linux SDK) |
| JET="$TOOLS/Jet" |
| JETCREATOR="$JET/JetCreator" |
| JETDEMOCONTENT="$JET/demo_content" |
| JETLOGICTEMPLATES="$JET/logic_templates" |
| JETDOC="$TEMP_SDK_DIR/docs/JetCreator" |
| |
| # need to rm these folders since a Mac SDK will have them and it might create a conflict |
| rm -rfv "$JET" |
| rm -rfv "$JETDOC" |
| |
| # now create fresh folders for JetCreator |
| mkdir -v "$JET" |
| mkdir -v "$JETDOC" |
| |
| cp -rv external/sonivox/jet_tools/JetCreator "$JETCREATOR"/ |
| cp -rv external/sonivox/jet_tools/JetCreator_content "$JETDEMOCONTENT"/ |
| cp -rv external/sonivox/jet_tools/logic_templates "$JETLOGICTEMPLATES"/ |
| chmod -vR u+w "$JETCREATOR" # fixes an issue where Cygwin might copy the above as u+rx only |
| cp -v prebuilt/windows/jetcreator/EASDLL.dll "$JETCREATOR"/ |
| |
| cp -v external/sonivox/docs/JET_Authoring_Guidelines.html "$JETDOC"/ |
| cp -rv external/sonivox/docs/JET_Authoring_Guidelines_files "$JETDOC"/ |
| cp -v external/sonivox/docs/JET_Creator_User_Manual.html "$JETDOC"/ |
| cp -rv external/sonivox/docs/JET_Creator_User_Manual_files "$JETDOC"/ |
| |
| # Copy or move platform specific tools to the default platform. |
| cp -v dalvik/dx/etc/dx.bat "$PLATFORM_TOOLS"/ |
| mv -v "$TOOLS"/{aapt.exe,aidl.exe,dexdump.exe} "$PLATFORM_TOOLS"/ |
| # Note: mgwz.dll must be both in SDK/tools for zipalign and in SDK/platform/XYZ/tools/ for aapt |
| cp -v "$TOOLS"/mgwz.dll "$PLATFORM_TOOLS"/ |
| |
| # Fix EOL chars to make window users happy - fix all files at the top level only |
| # as well as all batch files including those in platforms/<name>/tools/ |
| find "$TEMP_SDK_DIR" -maxdepth 1 -type f -writable -print0 | xargs -0 unix2dos -D |
| find "$TEMP_SDK_DIR" -maxdepth 3 -name "*.bat" -type f -writable -print0 | xargs -0 unix2dos -D |
| |
| # Done.. Zip it. Clean the temp folder ONLY if the zip worked (to ease debugging) |
| pushd "$TEMP_DIR" > /dev/null |
| [ -e "$DEST_NAME_ZIP" ] && rm -rfv "$DEST_NAME_ZIP" |
| zip -9r "$DEST_NAME_ZIP" "$DEST_NAME" && rm -rfv "$DEST_NAME" |
| popd > /dev/null |
| |
| # Now move the final zip from the temp dest to the final dist dir |
| mv -v "$TEMP_DIR/$DEST_NAME_ZIP" "$DIST_DIR/$DEST_NAME_ZIP" |
| |
| # We want fastboot and adb (and its DLLs) next to the new SDK |
| for i in fastboot.exe adb.exe AdbWinApi.dll AdbWinUsbApi.dll; do |
| cp -vf out/host/windows-x86/bin/$i "$DIST_DIR"/$i |
| done |
| |
| echo "Done" |
| echo |
| echo "Resulting SDK is in $DIST_DIR/$DEST_NAME_ZIP" |
| } |
| |
| check |
| status |
| build |
| package |
| |
| echo "Done" |