vm/mterp/c/header.cpp

/*
 * Copyright (C) 2008 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/* common includes */
#include "Dalvik.h"
#include "interp/InterpDefs.h"
#include "mterp/Mterp.h"
#include <math.h>                   // needed for fmod, fmodf
#include "mterp/common/FindInterface.h"

/*
 * Configuration defines.  These affect the C implementations, i.e. the
 * portable interpreter(s) and C stubs.
 *
 * Some defines are controlled by the Makefile, e.g.:
 *   WITH_INSTR_CHECKS
 *   WITH_TRACKREF_CHECKS
 *   EASY_GDB
 *   NDEBUG
 */

#ifdef WITH_INSTR_CHECKS            /* instruction-level paranoia (slow!) */
# define CHECK_BRANCH_OFFSETS
# define CHECK_REGISTER_INDICES
#endif

/*
 * Some architectures require 64-bit alignment for access to 64-bit data
 * types.  We can't just use pointers to copy 64-bit values out of our
 * interpreted register set, because gcc may assume the pointer target is
 * aligned and generate invalid code.
 *
 * There are two common approaches:
 *  (1) Use a union that defines a 32-bit pair and a 64-bit value.
 *  (2) Call memcpy().
 *
 * Depending upon what compiler you're using and what options are specified,
 * one may be faster than the other.  For example, the compiler might
 * convert a memcpy() of 8 bytes into a series of instructions and omit
 * the call.  The union version could cause some strange side-effects,
 * e.g. for a while ARM gcc thought it needed separate storage for each
 * inlined instance, and generated instructions to zero out ~700 bytes of
 * stack space at the top of the interpreter.
 *
 * The default is to use memcpy().  The current gcc for ARM seems to do
 * better with the union.
 */
#if defined(__ARM_EABI__)
# define NO_UNALIGN_64__UNION
#endif
/*
 * MIPS ABI requires 64-bit alignment for access to 64-bit data types.
 *
 * Use memcpy() to do the transfer
 */
#if defined(__mips__)
/* # define NO_UNALIGN_64__UNION */
#endif


//#define LOG_INSTR                   /* verbose debugging */
/* set and adjust ANDROID_LOG_TAGS='*:i jdwp:i dalvikvm:i dalvikvmi:i' */

/*
 * Export another copy of the PC on every instruction; this is largely
 * redundant with EXPORT_PC and the debugger code.  This value can be
 * compared against what we have stored on the stack with EXPORT_PC to
 * help ensure that we aren't missing any export calls.
 */
#if WITH_EXTRA_GC_CHECKS > 1
# define EXPORT_EXTRA_PC() (self->currentPc2 = pc)
#else
# define EXPORT_EXTRA_PC()
#endif

/*
 * Adjust the program counter.  "_offset" is a signed int, in 16-bit units.
 *
 * Assumes the existence of "const u2* pc" and "const u2* curMethod->insns".
 *
 * We don't advance the program counter until we finish an instruction or
 * branch, because we do want to have to unroll the PC if there's an
 * exception.
 */
#ifdef CHECK_BRANCH_OFFSETS
# define ADJUST_PC(_offset) do {                                            \
        int myoff = _offset;        /* deref only once */                   \
        if (pc + myoff < curMethod->insns ||                                \
            pc + myoff >= curMethod->insns + dvmGetMethodInsnsSize(curMethod)) \
        {                                                                   \
            char* desc;                                                     \
            desc = dexProtoCopyMethodDescriptor(&curMethod->prototype);     \
            ALOGE("Invalid branch %d at 0x%04x in %s.%s %s",                 \
                myoff, (int) (pc - curMethod->insns),                       \
                curMethod->clazz->descriptor, curMethod->name, desc);       \
            free(desc);                                                     \
            dvmAbort();                                                     \
        }                                                                   \
        pc += myoff;                                                        \
        EXPORT_EXTRA_PC();                                                  \
    } while (false)
#else
# define ADJUST_PC(_offset) do {                                            \
        pc += _offset;                                                      \
        EXPORT_EXTRA_PC();                                                  \
    } while (false)
#endif

/*
 * If enabled, log instructions as we execute them.
 */
#ifdef LOG_INSTR
# define ILOGD(...) ILOG(LOG_DEBUG, __VA_ARGS__)
# define ILOGV(...) ILOG(LOG_VERBOSE, __VA_ARGS__)
# define ILOG(_level, ...) do {                                             \
        char debugStrBuf[128];                                              \
        snprintf(debugStrBuf, sizeof(debugStrBuf), __VA_ARGS__);            \
        if (curMethod != NULL)                                              \
            ALOG(_level, LOG_TAG"i", "%-2d|%04x%s",                          \
                self->threadId, (int)(pc - curMethod->insns), debugStrBuf); \
        else                                                                \
            ALOG(_level, LOG_TAG"i", "%-2d|####%s",                          \
                self->threadId, debugStrBuf);                               \
    } while(false)
void dvmDumpRegs(const Method* method, const u4* framePtr, bool inOnly);
# define DUMP_REGS(_meth, _frame, _inOnly) dvmDumpRegs(_meth, _frame, _inOnly)
static const char kSpacing[] = "            ";
#else
# define ILOGD(...) ((void)0)
# define ILOGV(...) ((void)0)
# define DUMP_REGS(_meth, _frame, _inOnly) ((void)0)
#endif

/* get a long from an array of u4 */
static inline s8 getLongFromArray(const u4* ptr, int idx)
{
#if defined(NO_UNALIGN_64__UNION)
    union { s8 ll; u4 parts[2]; } conv;

    ptr += idx;
    conv.parts[0] = ptr[0];
    conv.parts[1] = ptr[1];
    return conv.ll;
#else
    s8 val;
    memcpy(&val, &ptr[idx], 8);
    return val;
#endif
}

/* store a long into an array of u4 */
static inline void putLongToArray(u4* ptr, int idx, s8 val)
{
#if defined(NO_UNALIGN_64__UNION)
    union { s8 ll; u4 parts[2]; } conv;

    ptr += idx;
    conv.ll = val;
    ptr[0] = conv.parts[0];
    ptr[1] = conv.parts[1];
#else
    memcpy(&ptr[idx], &val, 8);
#endif
}

/* get a double from an array of u4 */
static inline double getDoubleFromArray(const u4* ptr, int idx)
{
#if defined(NO_UNALIGN_64__UNION)
    union { double d; u4 parts[2]; } conv;

    ptr += idx;
    conv.parts[0] = ptr[0];
    conv.parts[1] = ptr[1];
    return conv.d;
#else
    double dval;
    memcpy(&dval, &ptr[idx], 8);
    return dval;
#endif
}

/* store a double into an array of u4 */
static inline void putDoubleToArray(u4* ptr, int idx, double dval)
{
#if defined(NO_UNALIGN_64__UNION)
    union { double d; u4 parts[2]; } conv;

    ptr += idx;
    conv.d = dval;
    ptr[0] = conv.parts[0];
    ptr[1] = conv.parts[1];
#else
    memcpy(&ptr[idx], &dval, 8);
#endif
}

/*
 * If enabled, validate the register number on every access.  Otherwise,
 * just do an array access.
 *
 * Assumes the existence of "u4* fp".
 *
 * "_idx" may be referenced more than once.
 */
#ifdef CHECK_REGISTER_INDICES
# define GET_REGISTER(_idx) \
    ( (_idx) < curMethod->registersSize ? \
        (fp[(_idx)]) : (assert(!"bad reg"),1969) )
# define SET_REGISTER(_idx, _val) \
    ( (_idx) < curMethod->registersSize ? \
        (fp[(_idx)] = (u4)(_val)) : (assert(!"bad reg"),1969) )
# define GET_REGISTER_AS_OBJECT(_idx)       ((Object *)GET_REGISTER(_idx))
# define SET_REGISTER_AS_OBJECT(_idx, _val) SET_REGISTER(_idx, (s4)_val)
# define GET_REGISTER_INT(_idx) ((s4) GET_REGISTER(_idx))
# define SET_REGISTER_INT(_idx, _val) SET_REGISTER(_idx, (s4)_val)
# define GET_REGISTER_WIDE(_idx) \
    ( (_idx) < curMethod->registersSize-1 ? \
        getLongFromArray(fp, (_idx)) : (assert(!"bad reg"),1969) )
# define SET_REGISTER_WIDE(_idx, _val) \
    ( (_idx) < curMethod->registersSize-1 ? \
        (void)putLongToArray(fp, (_idx), (_val)) : assert(!"bad reg") )
# define GET_REGISTER_FLOAT(_idx) \
    ( (_idx) < curMethod->registersSize ? \
        (*((float*) &fp[(_idx)])) : (assert(!"bad reg"),1969.0f) )
# define SET_REGISTER_FLOAT(_idx, _val) \
    ( (_idx) < curMethod->registersSize ? \
        (*((float*) &fp[(_idx)]) = (_val)) : (assert(!"bad reg"),1969.0f) )
# define GET_REGISTER_DOUBLE(_idx) \
    ( (_idx) < curMethod->registersSize-1 ? \
        getDoubleFromArray(fp, (_idx)) : (assert(!"bad reg"),1969.0) )
# define SET_REGISTER_DOUBLE(_idx, _val) \
    ( (_idx) < curMethod->registersSize-1 ? \
        (void)putDoubleToArray(fp, (_idx), (_val)) : assert(!"bad reg") )
#else
# define GET_REGISTER(_idx)                 (fp[(_idx)])
# define SET_REGISTER(_idx, _val)           (fp[(_idx)] = (_val))
# define GET_REGISTER_AS_OBJECT(_idx)       ((Object*) fp[(_idx)])
# define SET_REGISTER_AS_OBJECT(_idx, _val) (fp[(_idx)] = (u4)(_val))
# define GET_REGISTER_INT(_idx)             ((s4)GET_REGISTER(_idx))
# define SET_REGISTER_INT(_idx, _val)       SET_REGISTER(_idx, (s4)_val)
# define GET_REGISTER_WIDE(_idx)            getLongFromArray(fp, (_idx))
# define SET_REGISTER_WIDE(_idx, _val)      putLongToArray(fp, (_idx), (_val))
# define GET_REGISTER_FLOAT(_idx)           (*((float*) &fp[(_idx)]))
# define SET_REGISTER_FLOAT(_idx, _val)     (*((float*) &fp[(_idx)]) = (_val))
# define GET_REGISTER_DOUBLE(_idx)          getDoubleFromArray(fp, (_idx))
# define SET_REGISTER_DOUBLE(_idx, _val)    putDoubleToArray(fp, (_idx), (_val))
#endif

/*
 * Get 16 bits from the specified offset of the program counter.  We always
 * want to load 16 bits at a time from the instruction stream -- it's more
 * efficient than 8 and won't have the alignment problems that 32 might.
 *
 * Assumes existence of "const u2* pc".
 */
#define FETCH(_offset)     (pc[(_offset)])

/*
 * Extract instruction byte from 16-bit fetch (_inst is a u2).
 */
#define INST_INST(_inst)    ((_inst) & 0xff)

/*
 * Replace the opcode (used when handling breakpoints).  _opcode is a u1.
 */
#define INST_REPLACE_OP(_inst, _opcode) (((_inst) & 0xff00) | _opcode)

/*
 * Extract the "vA, vB" 4-bit registers from the instruction word (_inst is u2).
 */
#define INST_A(_inst)       (((_inst) >> 8) & 0x0f)
#define INST_B(_inst)       ((_inst) >> 12)

/*
 * Get the 8-bit "vAA" 8-bit register index from the instruction word.
 * (_inst is u2)
 */
#define INST_AA(_inst)      ((_inst) >> 8)

/*
 * The current PC must be available to Throwable constructors, e.g.
 * those created by the various exception throw routines, so that the
 * exception stack trace can be generated correctly.  If we don't do this,
 * the offset within the current method won't be shown correctly.  See the
 * notes in Exception.c.
 *
 * This is also used to determine the address for precise GC.
 *
 * Assumes existence of "u4* fp" and "const u2* pc".
 */
#define EXPORT_PC()         (SAVEAREA_FROM_FP(fp)->xtra.currentPc = pc)

/*
 * Check to see if "obj" is NULL.  If so, throw an exception.  Assumes the
 * pc has already been exported to the stack.
 *
 * Perform additional checks on debug builds.
 *
 * Use this to check for NULL when the instruction handler calls into
 * something that could throw an exception (so we have already called
 * EXPORT_PC at the top).
 */
static inline bool checkForNull(Object* obj)
{
    if (obj == NULL) {
        dvmThrowNullPointerException(NULL);
        return false;
    }
#ifdef WITH_EXTRA_OBJECT_VALIDATION
    if (!dvmIsHeapAddress(obj)) {
        ALOGE("Invalid object %p", obj);
        dvmAbort();
    }
#endif
#ifndef NDEBUG
    if (obj->clazz == NULL || ((u4) obj->clazz) <= 65536) {
        /* probable heap corruption */
        ALOGE("Invalid object class %p (in %p)", obj->clazz, obj);
        dvmAbort();
    }
#endif
    return true;
}

/*
 * Check to see if "obj" is NULL.  If so, export the PC into the stack
 * frame and throw an exception.
 *
 * Perform additional checks on debug builds.
 *
 * Use this to check for NULL when the instruction handler doesn't do
 * anything else that can throw an exception.
 */
static inline bool checkForNullExportPC(Object* obj, u4* fp, const u2* pc)
{
    if (obj == NULL) {
        EXPORT_PC();
        dvmThrowNullPointerException(NULL);
        return false;
    }
#ifdef WITH_EXTRA_OBJECT_VALIDATION
    if (!dvmIsHeapAddress(obj)) {
        ALOGE("Invalid object %p", obj);
        dvmAbort();
    }
#endif
#ifndef NDEBUG
    if (obj->clazz == NULL || ((u4) obj->clazz) <= 65536) {
        /* probable heap corruption */
        ALOGE("Invalid object class %p (in %p)", obj->clazz, obj);
        dvmAbort();
    }
#endif
    return true;
}