| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Dalvik opcode enumeration. |
| */ |
| #ifndef _LIBDEX_OPCODE |
| #define _LIBDEX_OPCODE |
| |
| /* |
| * If you add, delete, or renumber instructions, you need to change things |
| * in various places. Renumbering really only affects the "unused" opcodes, |
| * which are given explicit enumeration values to make it easier to find |
| * the places in the code that need to be updated when making changes -- |
| * if you replace "OP_UNUSED_2D" and neglect to update a switch statement, |
| * the compiler will complain about an unknown value. |
| * |
| * Opcode definitions and attributes: |
| * - update the OpCode enum below |
| * - update the "goto table" definition macro, DEFINE_GOTO_TABLE(), below |
| * - update the instruction info table generators and (if you changed an |
| * instruction format) instruction decoder in InstrUtils.c |
| * - update the instruction format list in InstrUtils.h, if necessary |
| * - update the parallel definitions in the class dalvik.bytecode.Opcodes |
| * |
| * Interpreter: |
| * - implement/update the instruction in C in mterp/c/... |
| * - verify new code by running with "dalvik.vm.execution-mode = |
| * int:portable" or "-Xint:portable" |
| * - implement/update the instruction in ARM in mterp/armv5/... |
| * - verify by enabling ARM handler for that instruction in mterp config |
| * and running int:fast as above |
| * - repeat for other platforms (x86, ...) |
| * (see notes in mterp/ReadMe.txt for rebuilding instructions) |
| * |
| * Verifier / optimizer: |
| * - update some stuff in analysis/DexOptimize.c, analysis/DexVerify.c, |
| * and/or analysis/CodeVerify.c as needed |
| * - verify by running with verifier enabled (it's on by default) |
| * |
| * Tools: |
| * - update the OpCodeNames table in dexdump/OpCodeNames.c |
| * - update dexdump/DexDump.c if an instruction format has changed |
| * |
| * Note: The Dalvik VM tests (in the tests subdirectory) provide a convenient |
| * way to test most of the above without doing any rebuilds. In particular, |
| * test 003-omnibus-opcodes will exercise most of the opcodes. |
| */ |
| |
| /* |
| * Dalvik opcode list. |
| */ |
| typedef enum OpCode { |
| OP_NOP = 0x00, |
| |
| OP_MOVE = 0x01, |
| OP_MOVE_FROM16 = 0x02, |
| OP_MOVE_16 = 0x03, |
| OP_MOVE_WIDE = 0x04, |
| OP_MOVE_WIDE_FROM16 = 0x05, |
| OP_MOVE_WIDE_16 = 0x06, |
| OP_MOVE_OBJECT = 0x07, |
| OP_MOVE_OBJECT_FROM16 = 0x08, |
| OP_MOVE_OBJECT_16 = 0x09, |
| |
| OP_MOVE_RESULT = 0x0a, |
| OP_MOVE_RESULT_WIDE = 0x0b, |
| OP_MOVE_RESULT_OBJECT = 0x0c, |
| OP_MOVE_EXCEPTION = 0x0d, |
| |
| OP_RETURN_VOID = 0x0e, |
| OP_RETURN = 0x0f, |
| OP_RETURN_WIDE = 0x10, |
| OP_RETURN_OBJECT = 0x11, |
| |
| OP_CONST_4 = 0x12, |
| OP_CONST_16 = 0x13, |
| OP_CONST = 0x14, |
| OP_CONST_HIGH16 = 0x15, |
| OP_CONST_WIDE_16 = 0x16, |
| OP_CONST_WIDE_32 = 0x17, |
| OP_CONST_WIDE = 0x18, |
| OP_CONST_WIDE_HIGH16 = 0x19, |
| OP_CONST_STRING = 0x1a, |
| OP_CONST_STRING_JUMBO = 0x1b, |
| OP_CONST_CLASS = 0x1c, |
| |
| OP_MONITOR_ENTER = 0x1d, |
| OP_MONITOR_EXIT = 0x1e, |
| |
| OP_CHECK_CAST = 0x1f, |
| OP_INSTANCE_OF = 0x20, |
| |
| OP_ARRAY_LENGTH = 0x21, |
| |
| OP_NEW_INSTANCE = 0x22, |
| OP_NEW_ARRAY = 0x23, |
| |
| OP_FILLED_NEW_ARRAY = 0x24, |
| OP_FILLED_NEW_ARRAY_RANGE = 0x25, |
| OP_FILL_ARRAY_DATA = 0x26, |
| |
| OP_THROW = 0x27, |
| OP_GOTO = 0x28, |
| OP_GOTO_16 = 0x29, |
| OP_GOTO_32 = 0x2a, |
| OP_PACKED_SWITCH = 0x2b, |
| OP_SPARSE_SWITCH = 0x2c, |
| |
| OP_CMPL_FLOAT = 0x2d, |
| OP_CMPG_FLOAT = 0x2e, |
| OP_CMPL_DOUBLE = 0x2f, |
| OP_CMPG_DOUBLE = 0x30, |
| OP_CMP_LONG = 0x31, |
| |
| OP_IF_EQ = 0x32, |
| OP_IF_NE = 0x33, |
| OP_IF_LT = 0x34, |
| OP_IF_GE = 0x35, |
| OP_IF_GT = 0x36, |
| OP_IF_LE = 0x37, |
| OP_IF_EQZ = 0x38, |
| OP_IF_NEZ = 0x39, |
| OP_IF_LTZ = 0x3a, |
| OP_IF_GEZ = 0x3b, |
| OP_IF_GTZ = 0x3c, |
| OP_IF_LEZ = 0x3d, |
| |
| OP_UNUSED_3E = 0x3e, |
| OP_UNUSED_3F = 0x3f, |
| OP_UNUSED_40 = 0x40, |
| OP_UNUSED_41 = 0x41, |
| OP_UNUSED_42 = 0x42, |
| OP_UNUSED_43 = 0x43, |
| |
| OP_AGET = 0x44, |
| OP_AGET_WIDE = 0x45, |
| OP_AGET_OBJECT = 0x46, |
| OP_AGET_BOOLEAN = 0x47, |
| OP_AGET_BYTE = 0x48, |
| OP_AGET_CHAR = 0x49, |
| OP_AGET_SHORT = 0x4a, |
| OP_APUT = 0x4b, |
| OP_APUT_WIDE = 0x4c, |
| OP_APUT_OBJECT = 0x4d, |
| OP_APUT_BOOLEAN = 0x4e, |
| OP_APUT_BYTE = 0x4f, |
| OP_APUT_CHAR = 0x50, |
| OP_APUT_SHORT = 0x51, |
| |
| OP_IGET = 0x52, |
| OP_IGET_WIDE = 0x53, |
| OP_IGET_OBJECT = 0x54, |
| OP_IGET_BOOLEAN = 0x55, |
| OP_IGET_BYTE = 0x56, |
| OP_IGET_CHAR = 0x57, |
| OP_IGET_SHORT = 0x58, |
| OP_IPUT = 0x59, |
| OP_IPUT_WIDE = 0x5a, |
| OP_IPUT_OBJECT = 0x5b, |
| OP_IPUT_BOOLEAN = 0x5c, |
| OP_IPUT_BYTE = 0x5d, |
| OP_IPUT_CHAR = 0x5e, |
| OP_IPUT_SHORT = 0x5f, |
| |
| OP_SGET = 0x60, |
| OP_SGET_WIDE = 0x61, |
| OP_SGET_OBJECT = 0x62, |
| OP_SGET_BOOLEAN = 0x63, |
| OP_SGET_BYTE = 0x64, |
| OP_SGET_CHAR = 0x65, |
| OP_SGET_SHORT = 0x66, |
| OP_SPUT = 0x67, |
| OP_SPUT_WIDE = 0x68, |
| OP_SPUT_OBJECT = 0x69, |
| OP_SPUT_BOOLEAN = 0x6a, |
| OP_SPUT_BYTE = 0x6b, |
| OP_SPUT_CHAR = 0x6c, |
| OP_SPUT_SHORT = 0x6d, |
| |
| OP_INVOKE_VIRTUAL = 0x6e, |
| OP_INVOKE_SUPER = 0x6f, |
| OP_INVOKE_DIRECT = 0x70, |
| OP_INVOKE_STATIC = 0x71, |
| OP_INVOKE_INTERFACE = 0x72, |
| |
| OP_UNUSED_73 = 0x73, |
| |
| OP_INVOKE_VIRTUAL_RANGE = 0x74, |
| OP_INVOKE_SUPER_RANGE = 0x75, |
| OP_INVOKE_DIRECT_RANGE = 0x76, |
| OP_INVOKE_STATIC_RANGE = 0x77, |
| OP_INVOKE_INTERFACE_RANGE = 0x78, |
| |
| OP_UNUSED_79 = 0x79, |
| OP_UNUSED_7A = 0x7a, |
| |
| OP_NEG_INT = 0x7b, |
| OP_NOT_INT = 0x7c, |
| OP_NEG_LONG = 0x7d, |
| OP_NOT_LONG = 0x7e, |
| OP_NEG_FLOAT = 0x7f, |
| OP_NEG_DOUBLE = 0x80, |
| OP_INT_TO_LONG = 0x81, |
| OP_INT_TO_FLOAT = 0x82, |
| OP_INT_TO_DOUBLE = 0x83, |
| OP_LONG_TO_INT = 0x84, |
| OP_LONG_TO_FLOAT = 0x85, |
| OP_LONG_TO_DOUBLE = 0x86, |
| OP_FLOAT_TO_INT = 0x87, |
| OP_FLOAT_TO_LONG = 0x88, |
| OP_FLOAT_TO_DOUBLE = 0x89, |
| OP_DOUBLE_TO_INT = 0x8a, |
| OP_DOUBLE_TO_LONG = 0x8b, |
| OP_DOUBLE_TO_FLOAT = 0x8c, |
| OP_INT_TO_BYTE = 0x8d, |
| OP_INT_TO_CHAR = 0x8e, |
| OP_INT_TO_SHORT = 0x8f, |
| |
| OP_ADD_INT = 0x90, |
| OP_SUB_INT = 0x91, |
| OP_MUL_INT = 0x92, |
| OP_DIV_INT = 0x93, |
| OP_REM_INT = 0x94, |
| OP_AND_INT = 0x95, |
| OP_OR_INT = 0x96, |
| OP_XOR_INT = 0x97, |
| OP_SHL_INT = 0x98, |
| OP_SHR_INT = 0x99, |
| OP_USHR_INT = 0x9a, |
| |
| OP_ADD_LONG = 0x9b, |
| OP_SUB_LONG = 0x9c, |
| OP_MUL_LONG = 0x9d, |
| OP_DIV_LONG = 0x9e, |
| OP_REM_LONG = 0x9f, |
| OP_AND_LONG = 0xa0, |
| OP_OR_LONG = 0xa1, |
| OP_XOR_LONG = 0xa2, |
| OP_SHL_LONG = 0xa3, |
| OP_SHR_LONG = 0xa4, |
| OP_USHR_LONG = 0xa5, |
| |
| OP_ADD_FLOAT = 0xa6, |
| OP_SUB_FLOAT = 0xa7, |
| OP_MUL_FLOAT = 0xa8, |
| OP_DIV_FLOAT = 0xa9, |
| OP_REM_FLOAT = 0xaa, |
| OP_ADD_DOUBLE = 0xab, |
| OP_SUB_DOUBLE = 0xac, |
| OP_MUL_DOUBLE = 0xad, |
| OP_DIV_DOUBLE = 0xae, |
| OP_REM_DOUBLE = 0xaf, |
| |
| OP_ADD_INT_2ADDR = 0xb0, |
| OP_SUB_INT_2ADDR = 0xb1, |
| OP_MUL_INT_2ADDR = 0xb2, |
| OP_DIV_INT_2ADDR = 0xb3, |
| OP_REM_INT_2ADDR = 0xb4, |
| OP_AND_INT_2ADDR = 0xb5, |
| OP_OR_INT_2ADDR = 0xb6, |
| OP_XOR_INT_2ADDR = 0xb7, |
| OP_SHL_INT_2ADDR = 0xb8, |
| OP_SHR_INT_2ADDR = 0xb9, |
| OP_USHR_INT_2ADDR = 0xba, |
| |
| OP_ADD_LONG_2ADDR = 0xbb, |
| OP_SUB_LONG_2ADDR = 0xbc, |
| OP_MUL_LONG_2ADDR = 0xbd, |
| OP_DIV_LONG_2ADDR = 0xbe, |
| OP_REM_LONG_2ADDR = 0xbf, |
| OP_AND_LONG_2ADDR = 0xc0, |
| OP_OR_LONG_2ADDR = 0xc1, |
| OP_XOR_LONG_2ADDR = 0xc2, |
| OP_SHL_LONG_2ADDR = 0xc3, |
| OP_SHR_LONG_2ADDR = 0xc4, |
| OP_USHR_LONG_2ADDR = 0xc5, |
| |
| OP_ADD_FLOAT_2ADDR = 0xc6, |
| OP_SUB_FLOAT_2ADDR = 0xc7, |
| OP_MUL_FLOAT_2ADDR = 0xc8, |
| OP_DIV_FLOAT_2ADDR = 0xc9, |
| OP_REM_FLOAT_2ADDR = 0xca, |
| OP_ADD_DOUBLE_2ADDR = 0xcb, |
| OP_SUB_DOUBLE_2ADDR = 0xcc, |
| OP_MUL_DOUBLE_2ADDR = 0xcd, |
| OP_DIV_DOUBLE_2ADDR = 0xce, |
| OP_REM_DOUBLE_2ADDR = 0xcf, |
| |
| OP_ADD_INT_LIT16 = 0xd0, |
| OP_RSUB_INT = 0xd1, /* no _LIT16 suffix for this */ |
| OP_MUL_INT_LIT16 = 0xd2, |
| OP_DIV_INT_LIT16 = 0xd3, |
| OP_REM_INT_LIT16 = 0xd4, |
| OP_AND_INT_LIT16 = 0xd5, |
| OP_OR_INT_LIT16 = 0xd6, |
| OP_XOR_INT_LIT16 = 0xd7, |
| |
| OP_ADD_INT_LIT8 = 0xd8, |
| OP_RSUB_INT_LIT8 = 0xd9, |
| OP_MUL_INT_LIT8 = 0xda, |
| OP_DIV_INT_LIT8 = 0xdb, |
| OP_REM_INT_LIT8 = 0xdc, |
| OP_AND_INT_LIT8 = 0xdd, |
| OP_OR_INT_LIT8 = 0xde, |
| OP_XOR_INT_LIT8 = 0xdf, |
| OP_SHL_INT_LIT8 = 0xe0, |
| OP_SHR_INT_LIT8 = 0xe1, |
| OP_USHR_INT_LIT8 = 0xe2, |
| |
| OP_UNUSED_E3 = 0xe3, |
| OP_UNUSED_E4 = 0xe4, |
| OP_UNUSED_E5 = 0xe5, |
| OP_UNUSED_E6 = 0xe6, |
| OP_UNUSED_E7 = 0xe7, |
| OP_UNUSED_E8 = 0xe8, |
| OP_UNUSED_E9 = 0xe9, |
| OP_UNUSED_EA = 0xea, |
| OP_UNUSED_EB = 0xeb, |
| OP_UNUSED_EC = 0xec, |
| |
| /* optimizer output -- these are never generated by "dx" */ |
| OP_THROW_VERIFICATION_ERROR = 0xed, |
| OP_EXECUTE_INLINE = 0xee, |
| OP_UNUSED_EF = 0xef, /* OP_EXECUTE_INLINE_RANGE? */ |
| |
| OP_INVOKE_DIRECT_EMPTY = 0xf0, |
| OP_UNUSED_F1 = 0xf1, /* OP_INVOKE_DIRECT_EMPTY_RANGE? */ |
| OP_IGET_QUICK = 0xf2, |
| OP_IGET_WIDE_QUICK = 0xf3, |
| OP_IGET_OBJECT_QUICK = 0xf4, |
| OP_IPUT_QUICK = 0xf5, |
| OP_IPUT_WIDE_QUICK = 0xf6, |
| OP_IPUT_OBJECT_QUICK = 0xf7, |
| |
| OP_INVOKE_VIRTUAL_QUICK = 0xf8, |
| OP_INVOKE_VIRTUAL_QUICK_RANGE = 0xf9, |
| OP_INVOKE_SUPER_QUICK = 0xfa, |
| OP_INVOKE_SUPER_QUICK_RANGE = 0xfb, |
| OP_UNUSED_FC = 0xfc, /* OP_INVOKE_DIRECT_QUICK? */ |
| OP_UNUSED_FD = 0xfd, /* OP_INVOKE_DIRECT_QUICK_RANGE? */ |
| OP_UNUSED_FE = 0xfe, /* OP_INVOKE_INTERFACE_QUICK? */ |
| OP_UNUSED_FF = 0xff, /* OP_INVOKE_INTERFACE_QUICK_RANGE*/ |
| } OpCode; |
| |
| #define kNumDalvikInstructions 256 |
| |
| /* |
| * Switch-statement signatures are a "NOP" followed by a code. (A true NOP |
| * is 0x0000.) |
| */ |
| #define kPackedSwitchSignature 0x0100 |
| #define kSparseSwitchSignature 0x0200 |
| #define kArrayDataSignature 0x0300 |
| |
| /* |
| * Macro used to generate computed goto tables for the C interpreter. |
| * |
| * The labels here must match up with the labels in the interpreter |
| * implementation. There is no direct connection between these and the |
| * numeric definitions above, but if the two get out of sync strange things |
| * will happen. |
| */ |
| #define DEFINE_GOTO_TABLE(_name) \ |
| static const void* _name[kNumDalvikInstructions] = { \ |
| /* 00..0f */ \ |
| H(OP_NOP), \ |
| H(OP_MOVE), \ |
| H(OP_MOVE_FROM16), \ |
| H(OP_MOVE_16), \ |
| H(OP_MOVE_WIDE), \ |
| H(OP_MOVE_WIDE_FROM16), \ |
| H(OP_MOVE_WIDE_16), \ |
| H(OP_MOVE_OBJECT), \ |
| H(OP_MOVE_OBJECT_FROM16), \ |
| H(OP_MOVE_OBJECT_16), \ |
| H(OP_MOVE_RESULT), \ |
| H(OP_MOVE_RESULT_WIDE), \ |
| H(OP_MOVE_RESULT_OBJECT), \ |
| H(OP_MOVE_EXCEPTION), \ |
| H(OP_RETURN_VOID), \ |
| H(OP_RETURN), \ |
| /* 10..1f */ \ |
| H(OP_RETURN_WIDE), \ |
| H(OP_RETURN_OBJECT), \ |
| H(OP_CONST_4), \ |
| H(OP_CONST_16), \ |
| H(OP_CONST), \ |
| H(OP_CONST_HIGH16), \ |
| H(OP_CONST_WIDE_16), \ |
| H(OP_CONST_WIDE_32), \ |
| H(OP_CONST_WIDE), \ |
| H(OP_CONST_WIDE_HIGH16), \ |
| H(OP_CONST_STRING), \ |
| H(OP_CONST_STRING_JUMBO), \ |
| H(OP_CONST_CLASS), \ |
| H(OP_MONITOR_ENTER), \ |
| H(OP_MONITOR_EXIT), \ |
| H(OP_CHECK_CAST), \ |
| /* 20..2f */ \ |
| H(OP_INSTANCE_OF), \ |
| H(OP_ARRAY_LENGTH), \ |
| H(OP_NEW_INSTANCE), \ |
| H(OP_NEW_ARRAY), \ |
| H(OP_FILLED_NEW_ARRAY), \ |
| H(OP_FILLED_NEW_ARRAY_RANGE), \ |
| H(OP_FILL_ARRAY_DATA), \ |
| H(OP_THROW), \ |
| H(OP_GOTO), \ |
| H(OP_GOTO_16), \ |
| H(OP_GOTO_32), \ |
| H(OP_PACKED_SWITCH), \ |
| H(OP_SPARSE_SWITCH), \ |
| H(OP_CMPL_FLOAT), \ |
| H(OP_CMPG_FLOAT), \ |
| H(OP_CMPL_DOUBLE), \ |
| /* 30..3f */ \ |
| H(OP_CMPG_DOUBLE), \ |
| H(OP_CMP_LONG), \ |
| H(OP_IF_EQ), \ |
| H(OP_IF_NE), \ |
| H(OP_IF_LT), \ |
| H(OP_IF_GE), \ |
| H(OP_IF_GT), \ |
| H(OP_IF_LE), \ |
| H(OP_IF_EQZ), \ |
| H(OP_IF_NEZ), \ |
| H(OP_IF_LTZ), \ |
| H(OP_IF_GEZ), \ |
| H(OP_IF_GTZ), \ |
| H(OP_IF_LEZ), \ |
| H(OP_UNUSED_3E), \ |
| H(OP_UNUSED_3F), \ |
| /* 40..4f */ \ |
| H(OP_UNUSED_40), \ |
| H(OP_UNUSED_41), \ |
| H(OP_UNUSED_42), \ |
| H(OP_UNUSED_43), \ |
| H(OP_AGET), \ |
| H(OP_AGET_WIDE), \ |
| H(OP_AGET_OBJECT), \ |
| H(OP_AGET_BOOLEAN), \ |
| H(OP_AGET_BYTE), \ |
| H(OP_AGET_CHAR), \ |
| H(OP_AGET_SHORT), \ |
| H(OP_APUT), \ |
| H(OP_APUT_WIDE), \ |
| H(OP_APUT_OBJECT), \ |
| H(OP_APUT_BOOLEAN), \ |
| H(OP_APUT_BYTE), \ |
| /* 50..5f */ \ |
| H(OP_APUT_CHAR), \ |
| H(OP_APUT_SHORT), \ |
| H(OP_IGET), \ |
| H(OP_IGET_WIDE), \ |
| H(OP_IGET_OBJECT), \ |
| H(OP_IGET_BOOLEAN), \ |
| H(OP_IGET_BYTE), \ |
| H(OP_IGET_CHAR), \ |
| H(OP_IGET_SHORT), \ |
| H(OP_IPUT), \ |
| H(OP_IPUT_WIDE), \ |
| H(OP_IPUT_OBJECT), \ |
| H(OP_IPUT_BOOLEAN), \ |
| H(OP_IPUT_BYTE), \ |
| H(OP_IPUT_CHAR), \ |
| H(OP_IPUT_SHORT), \ |
| /* 60..6f */ \ |
| H(OP_SGET), \ |
| H(OP_SGET_WIDE), \ |
| H(OP_SGET_OBJECT), \ |
| H(OP_SGET_BOOLEAN), \ |
| H(OP_SGET_BYTE), \ |
| H(OP_SGET_CHAR), \ |
| H(OP_SGET_SHORT), \ |
| H(OP_SPUT), \ |
| H(OP_SPUT_WIDE), \ |
| H(OP_SPUT_OBJECT), \ |
| H(OP_SPUT_BOOLEAN), \ |
| H(OP_SPUT_BYTE), \ |
| H(OP_SPUT_CHAR), \ |
| H(OP_SPUT_SHORT), \ |
| H(OP_INVOKE_VIRTUAL), \ |
| H(OP_INVOKE_SUPER), \ |
| /* 70..7f */ \ |
| H(OP_INVOKE_DIRECT), \ |
| H(OP_INVOKE_STATIC), \ |
| H(OP_INVOKE_INTERFACE), \ |
| H(OP_UNUSED_73), \ |
| H(OP_INVOKE_VIRTUAL_RANGE), \ |
| H(OP_INVOKE_SUPER_RANGE), \ |
| H(OP_INVOKE_DIRECT_RANGE), \ |
| H(OP_INVOKE_STATIC_RANGE), \ |
| H(OP_INVOKE_INTERFACE_RANGE), \ |
| H(OP_UNUSED_79), \ |
| H(OP_UNUSED_7A), \ |
| H(OP_NEG_INT), \ |
| H(OP_NOT_INT), \ |
| H(OP_NEG_LONG), \ |
| H(OP_NOT_LONG), \ |
| H(OP_NEG_FLOAT), \ |
| /* 80..8f */ \ |
| H(OP_NEG_DOUBLE), \ |
| H(OP_INT_TO_LONG), \ |
| H(OP_INT_TO_FLOAT), \ |
| H(OP_INT_TO_DOUBLE), \ |
| H(OP_LONG_TO_INT), \ |
| H(OP_LONG_TO_FLOAT), \ |
| H(OP_LONG_TO_DOUBLE), \ |
| H(OP_FLOAT_TO_INT), \ |
| H(OP_FLOAT_TO_LONG), \ |
| H(OP_FLOAT_TO_DOUBLE), \ |
| H(OP_DOUBLE_TO_INT), \ |
| H(OP_DOUBLE_TO_LONG), \ |
| H(OP_DOUBLE_TO_FLOAT), \ |
| H(OP_INT_TO_BYTE), \ |
| H(OP_INT_TO_CHAR), \ |
| H(OP_INT_TO_SHORT), \ |
| /* 90..9f */ \ |
| H(OP_ADD_INT), \ |
| H(OP_SUB_INT), \ |
| H(OP_MUL_INT), \ |
| H(OP_DIV_INT), \ |
| H(OP_REM_INT), \ |
| H(OP_AND_INT), \ |
| H(OP_OR_INT), \ |
| H(OP_XOR_INT), \ |
| H(OP_SHL_INT), \ |
| H(OP_SHR_INT), \ |
| H(OP_USHR_INT), \ |
| H(OP_ADD_LONG), \ |
| H(OP_SUB_LONG), \ |
| H(OP_MUL_LONG), \ |
| H(OP_DIV_LONG), \ |
| H(OP_REM_LONG), \ |
| /* a0..af */ \ |
| H(OP_AND_LONG), \ |
| H(OP_OR_LONG), \ |
| H(OP_XOR_LONG), \ |
| H(OP_SHL_LONG), \ |
| H(OP_SHR_LONG), \ |
| H(OP_USHR_LONG), \ |
| H(OP_ADD_FLOAT), \ |
| H(OP_SUB_FLOAT), \ |
| H(OP_MUL_FLOAT), \ |
| H(OP_DIV_FLOAT), \ |
| H(OP_REM_FLOAT), \ |
| H(OP_ADD_DOUBLE), \ |
| H(OP_SUB_DOUBLE), \ |
| H(OP_MUL_DOUBLE), \ |
| H(OP_DIV_DOUBLE), \ |
| H(OP_REM_DOUBLE), \ |
| /* b0..bf */ \ |
| H(OP_ADD_INT_2ADDR), \ |
| H(OP_SUB_INT_2ADDR), \ |
| H(OP_MUL_INT_2ADDR), \ |
| H(OP_DIV_INT_2ADDR), \ |
| H(OP_REM_INT_2ADDR), \ |
| H(OP_AND_INT_2ADDR), \ |
| H(OP_OR_INT_2ADDR), \ |
| H(OP_XOR_INT_2ADDR), \ |
| H(OP_SHL_INT_2ADDR), \ |
| H(OP_SHR_INT_2ADDR), \ |
| H(OP_USHR_INT_2ADDR), \ |
| H(OP_ADD_LONG_2ADDR), \ |
| H(OP_SUB_LONG_2ADDR), \ |
| H(OP_MUL_LONG_2ADDR), \ |
| H(OP_DIV_LONG_2ADDR), \ |
| H(OP_REM_LONG_2ADDR), \ |
| /* c0..cf */ \ |
| H(OP_AND_LONG_2ADDR), \ |
| H(OP_OR_LONG_2ADDR), \ |
| H(OP_XOR_LONG_2ADDR), \ |
| H(OP_SHL_LONG_2ADDR), \ |
| H(OP_SHR_LONG_2ADDR), \ |
| H(OP_USHR_LONG_2ADDR), \ |
| H(OP_ADD_FLOAT_2ADDR), \ |
| H(OP_SUB_FLOAT_2ADDR), \ |
| H(OP_MUL_FLOAT_2ADDR), \ |
| H(OP_DIV_FLOAT_2ADDR), \ |
| H(OP_REM_FLOAT_2ADDR), \ |
| H(OP_ADD_DOUBLE_2ADDR), \ |
| H(OP_SUB_DOUBLE_2ADDR), \ |
| H(OP_MUL_DOUBLE_2ADDR), \ |
| H(OP_DIV_DOUBLE_2ADDR), \ |
| H(OP_REM_DOUBLE_2ADDR), \ |
| /* d0..df */ \ |
| H(OP_ADD_INT_LIT16), \ |
| H(OP_RSUB_INT), \ |
| H(OP_MUL_INT_LIT16), \ |
| H(OP_DIV_INT_LIT16), \ |
| H(OP_REM_INT_LIT16), \ |
| H(OP_AND_INT_LIT16), \ |
| H(OP_OR_INT_LIT16), \ |
| H(OP_XOR_INT_LIT16), \ |
| H(OP_ADD_INT_LIT8), \ |
| H(OP_RSUB_INT_LIT8), \ |
| H(OP_MUL_INT_LIT8), \ |
| H(OP_DIV_INT_LIT8), \ |
| H(OP_REM_INT_LIT8), \ |
| H(OP_AND_INT_LIT8), \ |
| H(OP_OR_INT_LIT8), \ |
| H(OP_XOR_INT_LIT8), \ |
| /* e0..ef */ \ |
| H(OP_SHL_INT_LIT8), \ |
| H(OP_SHR_INT_LIT8), \ |
| H(OP_USHR_INT_LIT8), \ |
| H(OP_UNUSED_E3), \ |
| H(OP_UNUSED_E4), \ |
| H(OP_UNUSED_E5), \ |
| H(OP_UNUSED_E6), \ |
| H(OP_UNUSED_E7), \ |
| H(OP_UNUSED_E8), \ |
| H(OP_UNUSED_E9), \ |
| H(OP_UNUSED_EA), \ |
| H(OP_UNUSED_EB), \ |
| H(OP_UNUSED_EC), \ |
| H(OP_THROW_VERIFICATION_ERROR), \ |
| H(OP_EXECUTE_INLINE), \ |
| H(OP_UNUSED_EF), \ |
| /* f0..ff */ \ |
| H(OP_INVOKE_DIRECT_EMPTY), \ |
| H(OP_UNUSED_F1), \ |
| H(OP_IGET_QUICK), \ |
| H(OP_IGET_WIDE_QUICK), \ |
| H(OP_IGET_OBJECT_QUICK), \ |
| H(OP_IPUT_QUICK), \ |
| H(OP_IPUT_WIDE_QUICK), \ |
| H(OP_IPUT_OBJECT_QUICK), \ |
| H(OP_INVOKE_VIRTUAL_QUICK), \ |
| H(OP_INVOKE_VIRTUAL_QUICK_RANGE), \ |
| H(OP_INVOKE_SUPER_QUICK), \ |
| H(OP_INVOKE_SUPER_QUICK_RANGE), \ |
| H(OP_UNUSED_FC), \ |
| H(OP_UNUSED_FD), \ |
| H(OP_UNUSED_FE), \ |
| H(OP_UNUSED_FF), \ |
| }; |
| |
| #endif /*_LIBDEX_OPCODE*/ |
