blob: 765fd7f517af048c62d1b1c7dae3f79c90df2b2e [file] [log] [blame]
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Command-line DEX optimization and verification entry point.
*
* There are three ways to launch this:
* (1) From the VM. This takes a dozen args, one of which is a file
* descriptor that acts as both input and output. This allows us to
* remain ignorant of where the DEX data originally came from.
* (2) From installd or another native application. Pass in a file
* descriptor for a zip file, a file descriptor for the output, and
* a filename for debug messages. Many assumptions are made about
* what's going on (verification + optimization are enabled, boot
* class path is in BOOTCLASSPATH, etc).
* (3) On the host during a build for preoptimization. This behaves
* almost the same as (2), except it takes file names instead of
* file descriptors.
*
* There are some fragile aspects around bootclasspath entries, owing
* largely to the VM's history of working on whenever it thought it needed
* instead of strictly doing what it was told. If optimizing bootclasspath
* entries, always do them in the order in which they appear in the path.
*/
#include "Dalvik.h"
#include "libdex/OptInvocation.h"
#include "utils/Log.h"
#include "cutils/process_name.h"
#include <fcntl.h>
#include <stdbool.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
static const char* kClassesDex = "classes.dex";
/*
* Extract "classes.dex" from zipFd into "cacheFd", leaving a little space
* up front for the DEX optimization header.
*/
static int extractAndProcessZip(int zipFd, int cacheFd,
const char* debugFileName, bool isBootstrap, const char* bootClassPath,
const char* dexoptFlagStr)
{
ZipArchive zippy;
ZipEntry zipEntry;
size_t uncompLen;
long modWhen, crc32;
off_t dexOffset;
int err;
int result = -1;
memset(&zippy, 0, sizeof(zippy));
/* make sure we're still at the start of an empty file */
if (lseek(cacheFd, 0, SEEK_END) != 0) {
LOGE("DexOptZ: new cache file '%s' is not empty\n", debugFileName);
goto bail;
}
/*
* Write a skeletal DEX optimization header. We want the classes.dex
* to come just after it.
*/
err = dexOptCreateEmptyHeader(cacheFd);
if (err != 0)
goto bail;
/* record the file position so we can get back here later */
dexOffset = lseek(cacheFd, 0, SEEK_CUR);
if (dexOffset < 0)
goto bail;
/*
* Open the zip archive, find the DEX entry.
*/
if (dexZipPrepArchive(zipFd, debugFileName, &zippy) != 0) {
LOGW("DexOptZ: unable to open zip archive '%s'\n", debugFileName);
goto bail;
}
zipEntry = dexZipFindEntry(&zippy, kClassesDex);
if (zipEntry == NULL) {
LOGW("DexOptZ: zip archive '%s' does not include %s\n",
debugFileName, kClassesDex);
goto bail;
}
/*
* Extract some info about the zip entry.
*/
if (dexZipGetEntryInfo(&zippy, zipEntry, NULL, &uncompLen, NULL, NULL,
&modWhen, &crc32) != 0)
{
LOGW("DexOptZ: zip archive GetEntryInfo failed on %s\n", debugFileName);
goto bail;
}
uncompLen = uncompLen;
modWhen = modWhen;
crc32 = crc32;
/*
* Extract the DEX data into the cache file at the current offset.
*/
if (dexZipExtractEntryToFile(&zippy, zipEntry, cacheFd) != 0) {
LOGW("DexOptZ: extraction of %s from %s failed\n",
kClassesDex, debugFileName);
goto bail;
}
/* Parse the options. */
DexClassVerifyMode verifyMode = VERIFY_MODE_ALL;
DexOptimizerMode dexOptMode = OPTIMIZE_MODE_VERIFIED;
int dexoptFlags = 0; /* bit flags, from enum DexoptFlags */
if (dexoptFlagStr[0] != '\0') {
const char* opc;
const char* val;
opc = strstr(dexoptFlagStr, "v="); /* verification */
if (opc != NULL) {
switch (*(opc+2)) {
case 'n': verifyMode = VERIFY_MODE_NONE; break;
case 'r': verifyMode = VERIFY_MODE_REMOTE; break;
case 'a': verifyMode = VERIFY_MODE_ALL; break;
default: break;
}
}
opc = strstr(dexoptFlagStr, "o="); /* optimization */
if (opc != NULL) {
switch (*(opc+2)) {
case 'n': dexOptMode = OPTIMIZE_MODE_NONE; break;
case 'v': dexOptMode = OPTIMIZE_MODE_VERIFIED; break;
case 'a': dexOptMode = OPTIMIZE_MODE_ALL; break;
default: break;
}
}
opc = strstr(dexoptFlagStr, "m=y"); /* register map */
if (opc != NULL) {
dexoptFlags |= DEXOPT_GEN_REGISTER_MAPS;
}
opc = strstr(dexoptFlagStr, "u="); /* uniprocessor target */
if (opc != NULL) {
switch (*(opc+2)) {
case 'y': dexoptFlags |= DEXOPT_UNIPROCESSOR; break;
case 'n': dexoptFlags |= DEXOPT_SMP; break;
default: break;
}
}
}
/*
* Prep the VM and perform the optimization.
*/
if (dvmPrepForDexOpt(bootClassPath, dexOptMode, verifyMode,
dexoptFlags) != 0)
{
LOGE("DexOptZ: VM init failed\n");
goto bail;
}
//vmStarted = 1;
/* do the optimization */
if (!dvmContinueOptimization(cacheFd, dexOffset, uncompLen, debugFileName,
modWhen, crc32, isBootstrap))
{
LOGE("Optimization failed\n");
goto bail;
}
/* we don't shut the VM down -- process is about to exit */
result = 0;
bail:
dexZipCloseArchive(&zippy);
return result;
}
/*
* Common functionality for normal device-side processing as well as
* preoptimization.
*/
static int processZipFile(int zipFd, int cacheFd, const char* zipName,
const char *dexoptFlags)
{
int result = -1;
char* bcpCopy = NULL;
/*
* Check to see if this is a bootstrap class entry. If so, truncate
* the path.
*/
const char* bcp = getenv("BOOTCLASSPATH");
if (bcp == NULL) {
LOGE("DexOptZ: BOOTCLASSPATH not set\n");
goto bail;
}
bool isBootstrap = false;
const char* match = strstr(bcp, zipName);
if (match != NULL) {
/*
* TODO: we have a partial string match, but that doesn't mean
* we've matched an entire path component. We should make sure
* that we're matching on the full zipName, and if not we
* should re-do the strstr starting at (match+1).
*
* The scenario would be a bootclasspath with something like
* "/system/framework/core.jar" while we're trying to optimize
* "/framework/core.jar". Not very likely since all paths are
* absolute and end with ".jar", but not impossible.
*/
int matchOffset = match - bcp;
if (matchOffset > 0 && bcp[matchOffset-1] == ':')
matchOffset--;
LOGV("DexOptZ: found '%s' in bootclasspath, cutting off at %d\n",
zipName, matchOffset);
bcpCopy = strdup(bcp);
bcpCopy[matchOffset] = '\0';
bcp = bcpCopy;
LOGD("DexOptZ: truncated BOOTCLASSPATH to '%s'\n", bcp);
isBootstrap = true;
}
result = extractAndProcessZip(zipFd, cacheFd, zipName, isBootstrap,
bcp, dexoptFlags);
bail:
free(bcpCopy);
return result;
}
/* advance to the next arg and extract it */
#define GET_ARG(_var, _func, _msg) \
{ \
char* endp; \
(_var) = _func(*++argv, &endp, 0); \
if (*endp != '\0') { \
LOGE("%s '%s'", _msg, *argv); \
goto bail; \
} \
--argc; \
}
/*
* Parse arguments. We want:
* 0. (name of dexopt command -- ignored)
* 1. "--zip"
* 2. zip fd (input, read-only)
* 3. cache fd (output, read-write, locked with flock)
* 4. filename of zipfile being optimized (used for debug messages and
* for comparing against BOOTCLASSPATH; does not need to be
* accessible or even exist)
* 5. dexopt flags
*
* The BOOTCLASSPATH environment variable is assumed to hold the correct
* boot class path. If the filename provided appears in the boot class
* path, the path will be truncated just before that entry (so that, if
* you were to dexopt "core.jar", your bootclasspath would be empty).
*
* This does not try to normalize the boot class path name, so the
* filename test won't catch you if you get creative.
*/
static int fromZip(int argc, char* const argv[])
{
int result = -1;
int zipFd, cacheFd;
const char* zipName;
char* bcpCopy = NULL;
const char* dexoptFlags;
if (argc != 6) {
LOGE("Wrong number of args for --zip (found %d)\n", argc);
goto bail;
}
/* skip "--zip" */
argc--;
argv++;
GET_ARG(zipFd, strtol, "bad zip fd");
GET_ARG(cacheFd, strtol, "bad cache fd");
zipName = *++argv;
--argc;
dexoptFlags = *++argv;
--argc;
result = processZipFile(zipFd, cacheFd, zipName, dexoptFlags);
bail:
return result;
}
/*
* Parse arguments for a preoptimization run. This is when dalvikvm is run
* on a host to optimize dex files for eventual running on a (different)
* device. We want:
* 0. (name of dexopt command -- ignored)
* 1. "--preopt"
* 2. zipfile name
* 3. output file name
* 4. dexopt flags
*
* The BOOTCLASSPATH environment variable is assumed to hold the correct
* boot class path. If the filename provided appears in the boot class
* path, the path will be truncated just before that entry (so that, if
* you were to dexopt "core.jar", your bootclasspath would be empty).
*
* This does not try to normalize the boot class path name, so the
* filename test won't catch you if you get creative.
*/
static int preopt(int argc, char* const argv[])
{
int zipFd = -1;
int outFd = -1;
int result = -1;
if (argc != 5) {
/*
* Use stderr here, since this variant is meant to be called on
* the host side.
*/
fprintf(stderr, "Wrong number of args for --preopt (found %d)\n",
argc);
goto bail;
}
const char* zipName = argv[2];
const char* outName = argv[3];
const char* dexoptFlags = argv[4];
if (strstr(dexoptFlags, "u=y") == NULL &&
strstr(dexoptFlags, "u=n") == NULL)
{
fprintf(stderr, "Either 'u=y' or 'u=n' must be specified\n");
goto bail;
}
zipFd = open(zipName, O_RDONLY);
if (zipFd < 0) {
perror(argv[0]);
goto bail;
}
outFd = open(outName, O_RDWR | O_EXCL | O_CREAT, 0666);
if (outFd < 0) {
perror(argv[0]);
goto bail;
}
result = processZipFile(zipFd, outFd, zipName, dexoptFlags);
bail:
if (zipFd >= 0) {
close(zipFd);
}
if (outFd >= 0) {
close(outFd);
}
return result;
}
/*
* Parse arguments for an "old-style" invocation directly from the VM.
*
* Here's what we want:
* 0. (name of dexopt command -- ignored)
* 1. "--dex"
* 2. DALVIK_VM_BUILD value, as a sanity check
* 3. file descriptor, locked with flock, for DEX file being optimized
* 4. DEX offset within file
* 5. DEX length
* 6. filename of file being optimized (for debug messages only)
* 7. modification date of source (goes into dependency section)
* 8. CRC of source (goes into dependency section)
* 9. flags (optimization level, isBootstrap)
* 10. bootclasspath entry #1
* 11. bootclasspath entry #2
* ...
*
* dvmOptimizeDexFile() in dalvik/vm/analysis/DexOptimize.c builds the
* argument list and calls this executable.
*
* The bootclasspath entries become the dependencies for this DEX file.
*
* The open file descriptor MUST NOT be for one of the bootclasspath files.
* The parent has the descriptor locked, and we'll try to lock it again as
* part of processing the bootclasspath. (We can catch this and return
* an error by comparing filenames or by opening the bootclasspath files
* and stat()ing them for inode numbers).
*/
static int fromDex(int argc, char* const argv[])
{
int result = -1;
bool vmStarted = false;
char* bootClassPath = NULL;
int fd, flags, vmBuildVersion;
long offset, length;
const char* debugFileName;
u4 crc, modWhen;
char* endp;
if (argc < 10) {
/* don't have all mandatory args */
LOGE("Not enough arguments for --dex (found %d)\n", argc);
goto bail;
}
/* skip "--dex" */
argc--;
argv++;
/*
* Extract the args.
*/
GET_ARG(vmBuildVersion, strtol, "bad vm build");
if (vmBuildVersion != DALVIK_VM_BUILD) {
LOGE("DexOpt: build rev does not match VM: %d vs %d\n",
vmBuildVersion, DALVIK_VM_BUILD);
goto bail;
}
GET_ARG(fd, strtol, "bad fd");
GET_ARG(offset, strtol, "bad offset");
GET_ARG(length, strtol, "bad length");
debugFileName = *++argv;
--argc;
GET_ARG(modWhen, strtoul, "bad modWhen");
GET_ARG(crc, strtoul, "bad crc");
GET_ARG(flags, strtol, "bad flags");
LOGV("Args: fd=%d off=%ld len=%ld name='%s' mod=0x%x crc=0x%x flg=%d (argc=%d)\n",
fd, offset, length, debugFileName, modWhen, crc, flags, argc);
assert(argc > 0);
if (--argc == 0) {
bootClassPath = strdup("");
} else {
int i, bcpLen;
char* const* argp;
char* cp;
bcpLen = 0;
for (i = 0, argp = argv; i < argc; i++) {
++argp;
LOGV("DEP: '%s'\n", *argp);
bcpLen += strlen(*argp) + 1;
}
cp = bootClassPath = (char*) malloc(bcpLen +1);
for (i = 0, argp = argv; i < argc; i++) {
int strLen;
++argp;
strLen = strlen(*argp);
if (i != 0)
*cp++ = ':';
memcpy(cp, *argp, strLen);
cp += strLen;
}
*cp = '\0';
assert((int) strlen(bootClassPath) == bcpLen-1);
}
LOGV(" bootclasspath is '%s'\n", bootClassPath);
/* start the VM partway */
bool onlyOptVerifiedDex = false;
DexClassVerifyMode verifyMode;
DexOptimizerMode dexOptMode;
/* ugh -- upgrade these to a bit field if they get any more complex */
if ((flags & DEXOPT_VERIFY_ENABLED) != 0) {
if ((flags & DEXOPT_VERIFY_ALL) != 0)
verifyMode = VERIFY_MODE_ALL;
else
verifyMode = VERIFY_MODE_REMOTE;
} else {
verifyMode = VERIFY_MODE_NONE;
}
if ((flags & DEXOPT_OPT_ENABLED) != 0) {
if ((flags & DEXOPT_OPT_ALL) != 0)
dexOptMode = OPTIMIZE_MODE_ALL;
else
dexOptMode = OPTIMIZE_MODE_VERIFIED;
} else {
dexOptMode = OPTIMIZE_MODE_NONE;
}
if (dvmPrepForDexOpt(bootClassPath, dexOptMode, verifyMode, flags) != 0) {
LOGE("VM init failed\n");
goto bail;
}
vmStarted = true;
/* do the optimization */
if (!dvmContinueOptimization(fd, offset, length, debugFileName,
modWhen, crc, (flags & DEXOPT_IS_BOOTSTRAP) != 0))
{
LOGE("Optimization failed\n");
goto bail;
}
result = 0;
bail:
/*
* In theory we should gracefully shut the VM down at this point. In
* practice that only matters if we're checking for memory leaks with
* valgrind -- simply exiting is much faster.
*
* As it turns out, the DEX optimizer plays a little fast and loose
* with class loading. We load all of the classes from a partially-
* formed DEX file, which is unmapped when we're done. If we want to
* do clean shutdown here, perhaps for testing with valgrind, we need
* to skip the munmap call there.
*/
#if 0
if (vmStarted) {
LOGI("DexOpt shutting down, result=%d\n", result);
dvmShutdown();
}
#endif
free(bootClassPath);
LOGV("DexOpt command complete (result=%d)\n", result);
return result;
}
/*
* Main entry point. Decide where to go.
*/
int main(int argc, char* const argv[])
{
set_process_name("dexopt");
setvbuf(stdout, NULL, _IONBF, 0);
if (argc > 1) {
if (strcmp(argv[1], "--zip") == 0)
return fromZip(argc, argv);
else if (strcmp(argv[1], "--dex") == 0)
return fromDex(argc, argv);
else if (strcmp(argv[1], "--preopt") == 0)
return preopt(argc, argv);
}
fprintf(stderr,
"Usage:\n\n"
"Short version: Don't use this.\n\n"
"Slightly longer version: This system-internal tool is used to\n"
"produce optimized dex files. See the source code for details.\n");
return 1;
}