vm/compiler/codegen/arm/armv5te-vfp/ArchVariant.c - platform/dalvik - Git at Google

 /*
  * Copyright (C) 2009 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 /*
  * This file is included by Codegen-armv5te-vfp.c, and implements architecture
  * variant-specific code.
  */

 #define USE_IN_CACHE_HANDLER 1

 /*
  * Determine the initial instruction set to be used for this trace.
  * Later components may decide to change this.
  */
 JitInstructionSetType dvmCompilerInstructionSet(CompilationUnit *cUnit)
 {
     return DALVIK_JIT_THUMB;
 }

 /*
  * Jump to the out-of-line handler in ARM mode to finish executing the
  * remaining of more complex instructions.
  */
 static void genDispatchToHandler(CompilationUnit *cUnit, TemplateOpCode opCode)
 {
 #if USE_IN_CACHE_HANDLER
     /*
      * NOTE - In practice BLX only needs one operand, but since the assembler
      * may abort itself and retry due to other out-of-range conditions we
      * cannot really use operand[0] to store the absolute target address since
      * it may get clobbered by the final relative offset. Therefore,
      * we fake BLX_1 is a two operand instruction and the absolute target
      * address is stored in operand[1].
      */
     newLIR2(cUnit, THUMB_BLX_1,
             (int) gDvmJit.codeCache + templateEntryOffsets[opCode],
             (int) gDvmJit.codeCache + templateEntryOffsets[opCode]);
     newLIR2(cUnit, THUMB_BLX_2,
             (int) gDvmJit.codeCache + templateEntryOffsets[opCode],
             (int) gDvmJit.codeCache + templateEntryOffsets[opCode]);
 #else
     /*
      * In case we want to access the statically compiled handlers for
      * debugging purposes, define USE_IN_CACHE_HANDLER to 0
      */
     void *templatePtr;

 #define JIT_TEMPLATE(X) extern void dvmCompiler_TEMPLATE_##X();
 #include "../../../template/armv5te-vfp/TemplateOpList.h"
 #undef JIT_TEMPLATE
     switch (opCode) {
 #define JIT_TEMPLATE(X) \
         case TEMPLATE_##X: { templatePtr = dvmCompiler_TEMPLATE_##X; break; }
 #include "../../../template/armv5te-vfp/TemplateOpList.h"
 #undef JIT_TEMPLATE
         default: templatePtr = NULL;
     }
     loadConstant(cUnit, r7, (int) templatePtr);
     newLIR1(cUnit, THUMB_BLX_R, r7);
 #endif
 }

 /* Architecture-specific initializations and checks go here */
 bool dvmCompilerArchInit(void)
 {
     /* First, declare dvmCompiler_TEMPLATE_XXX for each template */
 #define JIT_TEMPLATE(X) extern void dvmCompiler_TEMPLATE_##X();
 #include "../../../template/armv5te-vfp/TemplateOpList.h"
 #undef JIT_TEMPLATE

     int i = 0;
     extern void dvmCompilerTemplateStart(void);

     /*
      * Then, populate the templateEntryOffsets array with the offsets from the
      * the dvmCompilerTemplateStart symbol for each template.
      */
 #define JIT_TEMPLATE(X) templateEntryOffsets[i++] = \
     (intptr_t) dvmCompiler_TEMPLATE_##X - (intptr_t) dvmCompilerTemplateStart;
 #include "../../../template/armv5te-vfp/TemplateOpList.h"
 #undef JIT_TEMPLATE

     /* Codegen-specific assumptions */
     assert(offsetof(ClassObject, vtable) < 128 &&
            (offsetof(ClassObject, vtable) & 0x3) == 0);
     assert(offsetof(ArrayObject, length) < 128 &&
            (offsetof(ArrayObject, length) & 0x3) == 0);
     assert(offsetof(ArrayObject, contents) < 256);

     /* Up to 5 args are pushed on top of FP - sizeofStackSaveArea */
     assert(sizeof(StackSaveArea) < 236);

     /*
      * EA is calculated by doing "Rn + imm5 << 2", and there are 5 entry points
      * that codegen may access, make sure that the offset from the top of the
      * struct is less than 108.
      */
     assert(offsetof(InterpState, jitToInterpEntries) < 108);
     return true;
 }

 static bool genInlineSqrt(CompilationUnit *cUnit, MIR *mir)
 {
     int offset = offsetof(InterpState, retval);
     OpCode opCode = mir->dalvikInsn.opCode;
     int vSrc = mir->dalvikInsn.vA;
     loadValueAddress(cUnit, vSrc, r2);
     genDispatchToHandler(cUnit, TEMPLATE_SQRT_DOUBLE_VFP);
     newLIR3(cUnit, THUMB_STR_RRI5, r0, rGLUE, offset >> 2);
     newLIR3(cUnit, THUMB_STR_RRI5, r1, rGLUE, (offset >> 2) + 1);
     return false;
 }

 static bool genInlineCos(CompilationUnit *cUnit, MIR *mir)
 {
     return false;
 }

 static bool genInlineSin(CompilationUnit *cUnit, MIR *mir)
 {
     return false;
 }

 static bool genArithOpFloat(CompilationUnit *cUnit, MIR *mir, int vDest,
                                 int vSrc1, int vSrc2)
 {
     TemplateOpCode opCode;

     /*
      * Don't attempt to optimize register usage since these opcodes call out to
      * the handlers.
      */
     switch (mir->dalvikInsn.opCode) {
         case OP_ADD_FLOAT_2ADDR:
         case OP_ADD_FLOAT:
             opCode = TEMPLATE_ADD_FLOAT_VFP;
             break;
         case OP_SUB_FLOAT_2ADDR:
         case OP_SUB_FLOAT:
             opCode = TEMPLATE_SUB_FLOAT_VFP;
             break;
         case OP_DIV_FLOAT_2ADDR:
         case OP_DIV_FLOAT:
             opCode = TEMPLATE_DIV_FLOAT_VFP;
             break;
         case OP_MUL_FLOAT_2ADDR:
         case OP_MUL_FLOAT:
             opCode = TEMPLATE_MUL_FLOAT_VFP;
             break;
         case OP_REM_FLOAT_2ADDR:
         case OP_REM_FLOAT:
         case OP_NEG_FLOAT: {
             return genArithOpFloatPortable(cUnit, mir, vDest,
                                                       vSrc1, vSrc2);
         }
         default:
             return true;
     }
     loadValueAddress(cUnit, vDest, r0);
     loadValueAddress(cUnit, vSrc1, r1);
     loadValueAddress(cUnit, vSrc2, r2);
     genDispatchToHandler(cUnit, opCode);
     return false;
 }

 static bool genArithOpDouble(CompilationUnit *cUnit, MIR *mir, int vDest,
                              int vSrc1, int vSrc2)
 {
     TemplateOpCode opCode;

     /*
      * Don't attempt to optimize register usage since these opcodes call out to
      * the handlers.
      */
     switch (mir->dalvikInsn.opCode) {
         case OP_ADD_DOUBLE_2ADDR:
         case OP_ADD_DOUBLE:
             opCode = TEMPLATE_ADD_DOUBLE_VFP;
             break;
         case OP_SUB_DOUBLE_2ADDR:
         case OP_SUB_DOUBLE:
             opCode = TEMPLATE_SUB_DOUBLE_VFP;
             break;
         case OP_DIV_DOUBLE_2ADDR:
         case OP_DIV_DOUBLE:
             opCode = TEMPLATE_DIV_DOUBLE_VFP;
             break;
         case OP_MUL_DOUBLE_2ADDR:
         case OP_MUL_DOUBLE:
             opCode = TEMPLATE_MUL_DOUBLE_VFP;
             break;
         case OP_REM_DOUBLE_2ADDR:
         case OP_REM_DOUBLE:
         case OP_NEG_DOUBLE: {
             return genArithOpDoublePortable(cUnit, mir, vDest,
                                                        vSrc1, vSrc2);
         }
         default:
             return true;
     }
     loadValueAddress(cUnit, vDest, r0);
     loadValueAddress(cUnit, vSrc1, r1);
     loadValueAddress(cUnit, vSrc2, r2);
     genDispatchToHandler(cUnit, opCode);
     return false;
 }

 static bool genConversion(CompilationUnit *cUnit, MIR *mir)
 {
     OpCode opCode = mir->dalvikInsn.opCode;
     int vSrc1Dest = mir->dalvikInsn.vA;
     int vSrc2 = mir->dalvikInsn.vB;
     TemplateOpCode template;

     switch (opCode) {
         case OP_INT_TO_FLOAT:
             template = TEMPLATE_INT_TO_FLOAT_VFP;
             break;
         case OP_FLOAT_TO_INT:
             template = TEMPLATE_FLOAT_TO_INT_VFP;
             break;
         case OP_DOUBLE_TO_FLOAT:
             template = TEMPLATE_DOUBLE_TO_FLOAT_VFP;
             break;
         case OP_FLOAT_TO_DOUBLE:
             template = TEMPLATE_FLOAT_TO_DOUBLE_VFP;
             break;
         case OP_INT_TO_DOUBLE:
             template = TEMPLATE_INT_TO_DOUBLE_VFP;
             break;
         case OP_DOUBLE_TO_INT:
             template = TEMPLATE_DOUBLE_TO_INT_VFP;
             break;
         case OP_FLOAT_TO_LONG:
         case OP_LONG_TO_FLOAT:
         case OP_DOUBLE_TO_LONG:
         case OP_LONG_TO_DOUBLE:
             return genConversionPortable(cUnit, mir);
         default:
             return true;
     }
     loadValueAddress(cUnit, vSrc1Dest, r0);
     loadValueAddress(cUnit, vSrc2, r1);
     genDispatchToHandler(cUnit, template);
     return false;
 }

 static bool genCmpX(CompilationUnit *cUnit, MIR *mir, int vDest, int vSrc1,
                     int vSrc2)
 {
     TemplateOpCode template;

     /*
      * Don't attempt to optimize register usage since these opcodes call out to
      * the handlers.
      */
     switch(mir->dalvikInsn.opCode) {
         case OP_CMPL_FLOAT:
             template = TEMPLATE_CMPL_FLOAT_VFP;
             break;
         case OP_CMPG_FLOAT:
             template = TEMPLATE_CMPG_FLOAT_VFP;
             break;
         case OP_CMPL_DOUBLE:
             template = TEMPLATE_CMPL_DOUBLE_VFP;
             break;
         case OP_CMPG_DOUBLE:
             template = TEMPLATE_CMPG_DOUBLE_VFP;
             break;
         default:
             return true;
     }
     loadValueAddress(cUnit, vSrc1, r0);
     loadValueAddress(cUnit, vSrc2, r1);
     genDispatchToHandler(cUnit, template);
     storeValue(cUnit, r0, vDest, r1);
     return false;
 }
	/*
	* Copyright (C) 2009 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/*
	* This file is included by Codegen-armv5te-vfp.c, and implements architecture
	* variant-specific code.
	*/

	#define USE_IN_CACHE_HANDLER 1

	/*
	* Determine the initial instruction set to be used for this trace.
	* Later components may decide to change this.
	*/
	JitInstructionSetType dvmCompilerInstructionSet(CompilationUnit *cUnit)
	{
	return DALVIK_JIT_THUMB;
	}

	/*
	* Jump to the out-of-line handler in ARM mode to finish executing the
	* remaining of more complex instructions.
	*/
	static void genDispatchToHandler(CompilationUnit *cUnit, TemplateOpCode opCode)
	{
	#if USE_IN_CACHE_HANDLER
	/*
	* NOTE - In practice BLX only needs one operand, but since the assembler
	* may abort itself and retry due to other out-of-range conditions we
	* cannot really use operand[0] to store the absolute target address since
	* it may get clobbered by the final relative offset. Therefore,
	* we fake BLX_1 is a two operand instruction and the absolute target
	* address is stored in operand[1].
	*/
	newLIR2(cUnit, THUMB_BLX_1,
	(int) gDvmJit.codeCache + templateEntryOffsets[opCode],
	(int) gDvmJit.codeCache + templateEntryOffsets[opCode]);
	newLIR2(cUnit, THUMB_BLX_2,
	(int) gDvmJit.codeCache + templateEntryOffsets[opCode],
	(int) gDvmJit.codeCache + templateEntryOffsets[opCode]);
	#else
	/*
	* In case we want to access the statically compiled handlers for
	* debugging purposes, define USE_IN_CACHE_HANDLER to 0
	*/
	void *templatePtr;

	#define JIT_TEMPLATE(X) extern void dvmCompiler_TEMPLATE_##X();
	#include "../../../template/armv5te-vfp/TemplateOpList.h"
	#undef JIT_TEMPLATE
	switch (opCode) {
	#define JIT_TEMPLATE(X) \
	case TEMPLATE_##X: { templatePtr = dvmCompiler_TEMPLATE_##X; break; }
	#include "../../../template/armv5te-vfp/TemplateOpList.h"
	#undef JIT_TEMPLATE
	default: templatePtr = NULL;
	}
	loadConstant(cUnit, r7, (int) templatePtr);
	newLIR1(cUnit, THUMB_BLX_R, r7);
	#endif
	}

	/* Architecture-specific initializations and checks go here */
	bool dvmCompilerArchInit(void)
	{
	/* First, declare dvmCompiler_TEMPLATE_XXX for each template */
	#define JIT_TEMPLATE(X) extern void dvmCompiler_TEMPLATE_##X();
	#include "../../../template/armv5te-vfp/TemplateOpList.h"
	#undef JIT_TEMPLATE

	int i = 0;
	extern void dvmCompilerTemplateStart(void);

	/*
	* Then, populate the templateEntryOffsets array with the offsets from the
	* the dvmCompilerTemplateStart symbol for each template.
	*/
	#define JIT_TEMPLATE(X) templateEntryOffsets[i++] = \
	(intptr_t) dvmCompiler_TEMPLATE_##X - (intptr_t) dvmCompilerTemplateStart;
	#include "../../../template/armv5te-vfp/TemplateOpList.h"
	#undef JIT_TEMPLATE

	/* Codegen-specific assumptions */
	assert(offsetof(ClassObject, vtable) < 128 &&
	(offsetof(ClassObject, vtable) & 0x3) == 0);
	assert(offsetof(ArrayObject, length) < 128 &&
	(offsetof(ArrayObject, length) & 0x3) == 0);
	assert(offsetof(ArrayObject, contents) < 256);

	/* Up to 5 args are pushed on top of FP - sizeofStackSaveArea */
	assert(sizeof(StackSaveArea) < 236);

	/*
	* EA is calculated by doing "Rn + imm5 << 2", and there are 5 entry points
	* that codegen may access, make sure that the offset from the top of the
	* struct is less than 108.
	*/
	assert(offsetof(InterpState, jitToInterpEntries) < 108);
	return true;
	}

	static bool genInlineSqrt(CompilationUnit cUnit, MIR mir)
	{
	int offset = offsetof(InterpState, retval);
	OpCode opCode = mir->dalvikInsn.opCode;
	int vSrc = mir->dalvikInsn.vA;
	loadValueAddress(cUnit, vSrc, r2);
	genDispatchToHandler(cUnit, TEMPLATE_SQRT_DOUBLE_VFP);
	newLIR3(cUnit, THUMB_STR_RRI5, r0, rGLUE, offset >> 2);
	newLIR3(cUnit, THUMB_STR_RRI5, r1, rGLUE, (offset >> 2) + 1);
	return false;
	}

	static bool genInlineCos(CompilationUnit cUnit, MIR mir)
	{
	return false;
	}

	static bool genInlineSin(CompilationUnit cUnit, MIR mir)
	{
	return false;
	}

	static bool genArithOpFloat(CompilationUnit cUnit, MIR mir, int vDest,
	int vSrc1, int vSrc2)
	{
	TemplateOpCode opCode;

	/*
	* Don't attempt to optimize register usage since these opcodes call out to
	* the handlers.
	*/
	switch (mir->dalvikInsn.opCode) {
	case OP_ADD_FLOAT_2ADDR:
	case OP_ADD_FLOAT:
	opCode = TEMPLATE_ADD_FLOAT_VFP;
	break;
	case OP_SUB_FLOAT_2ADDR:
	case OP_SUB_FLOAT:
	opCode = TEMPLATE_SUB_FLOAT_VFP;
	break;
	case OP_DIV_FLOAT_2ADDR:
	case OP_DIV_FLOAT:
	opCode = TEMPLATE_DIV_FLOAT_VFP;
	break;
	case OP_MUL_FLOAT_2ADDR:
	case OP_MUL_FLOAT:
	opCode = TEMPLATE_MUL_FLOAT_VFP;
	break;
	case OP_REM_FLOAT_2ADDR:
	case OP_REM_FLOAT:
	case OP_NEG_FLOAT: {
	return genArithOpFloatPortable(cUnit, mir, vDest,
	vSrc1, vSrc2);
	}
	default:
	return true;
	}
	loadValueAddress(cUnit, vDest, r0);
	loadValueAddress(cUnit, vSrc1, r1);
	loadValueAddress(cUnit, vSrc2, r2);
	genDispatchToHandler(cUnit, opCode);
	return false;
	}

	static bool genArithOpDouble(CompilationUnit cUnit, MIR mir, int vDest,
	int vSrc1, int vSrc2)
	{
	TemplateOpCode opCode;

	/*
	* Don't attempt to optimize register usage since these opcodes call out to
	* the handlers.
	*/
	switch (mir->dalvikInsn.opCode) {
	case OP_ADD_DOUBLE_2ADDR:
	case OP_ADD_DOUBLE:
	opCode = TEMPLATE_ADD_DOUBLE_VFP;
	break;
	case OP_SUB_DOUBLE_2ADDR:
	case OP_SUB_DOUBLE:
	opCode = TEMPLATE_SUB_DOUBLE_VFP;
	break;
	case OP_DIV_DOUBLE_2ADDR:
	case OP_DIV_DOUBLE:
	opCode = TEMPLATE_DIV_DOUBLE_VFP;
	break;
	case OP_MUL_DOUBLE_2ADDR:
	case OP_MUL_DOUBLE:
	opCode = TEMPLATE_MUL_DOUBLE_VFP;
	break;
	case OP_REM_DOUBLE_2ADDR:
	case OP_REM_DOUBLE:
	case OP_NEG_DOUBLE: {
	return genArithOpDoublePortable(cUnit, mir, vDest,
	vSrc1, vSrc2);
	}
	default:
	return true;
	}
	loadValueAddress(cUnit, vDest, r0);
	loadValueAddress(cUnit, vSrc1, r1);
	loadValueAddress(cUnit, vSrc2, r2);
	genDispatchToHandler(cUnit, opCode);
	return false;
	}

	static bool genConversion(CompilationUnit cUnit, MIR mir)
	{
	OpCode opCode = mir->dalvikInsn.opCode;
	int vSrc1Dest = mir->dalvikInsn.vA;
	int vSrc2 = mir->dalvikInsn.vB;
	TemplateOpCode template;

	switch (opCode) {
	case OP_INT_TO_FLOAT:
	template = TEMPLATE_INT_TO_FLOAT_VFP;
	break;
	case OP_FLOAT_TO_INT:
	template = TEMPLATE_FLOAT_TO_INT_VFP;
	break;
	case OP_DOUBLE_TO_FLOAT:
	template = TEMPLATE_DOUBLE_TO_FLOAT_VFP;
	break;
	case OP_FLOAT_TO_DOUBLE:
	template = TEMPLATE_FLOAT_TO_DOUBLE_VFP;
	break;
	case OP_INT_TO_DOUBLE:
	template = TEMPLATE_INT_TO_DOUBLE_VFP;
	break;
	case OP_DOUBLE_TO_INT:
	template = TEMPLATE_DOUBLE_TO_INT_VFP;
	break;
	case OP_FLOAT_TO_LONG:
	case OP_LONG_TO_FLOAT:
	case OP_DOUBLE_TO_LONG:
	case OP_LONG_TO_DOUBLE:
	return genConversionPortable(cUnit, mir);
	default:
	return true;
	}
	loadValueAddress(cUnit, vSrc1Dest, r0);
	loadValueAddress(cUnit, vSrc2, r1);
	genDispatchToHandler(cUnit, template);
	return false;
	}

	static bool genCmpX(CompilationUnit cUnit, MIR mir, int vDest, int vSrc1,
	int vSrc2)
	{
	TemplateOpCode template;

	/*
	* Don't attempt to optimize register usage since these opcodes call out to
	* the handlers.
	*/
	switch(mir->dalvikInsn.opCode) {
	case OP_CMPL_FLOAT:
	template = TEMPLATE_CMPL_FLOAT_VFP;
	break;
	case OP_CMPG_FLOAT:
	template = TEMPLATE_CMPG_FLOAT_VFP;
	break;
	case OP_CMPL_DOUBLE:
	template = TEMPLATE_CMPL_DOUBLE_VFP;
	break;
	case OP_CMPG_DOUBLE:
	template = TEMPLATE_CMPG_DOUBLE_VFP;
	break;
	default:
	return true;
	}
	loadValueAddress(cUnit, vSrc1, r0);
	loadValueAddress(cUnit, vSrc2, r1);
	genDispatchToHandler(cUnit, template);
	storeValue(cUnit, r0, vDest, r1);
	return false;
	}