| // Copyright (C) 2018 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| package apex |
| |
| import ( |
| "fmt" |
| "path" |
| "path/filepath" |
| "sort" |
| "strings" |
| "sync" |
| |
| "android/soong/android" |
| "android/soong/cc" |
| "android/soong/java" |
| "android/soong/python" |
| |
| "github.com/google/blueprint" |
| "github.com/google/blueprint/bootstrap" |
| "github.com/google/blueprint/proptools" |
| ) |
| |
| const ( |
| imageApexSuffix = ".apex" |
| zipApexSuffix = ".zipapex" |
| flattenedSuffix = ".flattened" |
| |
| imageApexType = "image" |
| zipApexType = "zip" |
| flattenedApexType = "flattened" |
| ) |
| |
| type dependencyTag struct { |
| blueprint.BaseDependencyTag |
| name string |
| |
| // determines if the dependent will be part of the APEX payload |
| payload bool |
| } |
| |
| var ( |
| sharedLibTag = dependencyTag{name: "sharedLib", payload: true} |
| executableTag = dependencyTag{name: "executable", payload: true} |
| javaLibTag = dependencyTag{name: "javaLib", payload: true} |
| prebuiltTag = dependencyTag{name: "prebuilt", payload: true} |
| testTag = dependencyTag{name: "test", payload: true} |
| keyTag = dependencyTag{name: "key"} |
| certificateTag = dependencyTag{name: "certificate"} |
| usesTag = dependencyTag{name: "uses"} |
| androidAppTag = dependencyTag{name: "androidApp", payload: true} |
| apexAvailWl = makeApexAvailableWhitelist() |
| ) |
| |
| // This is a map from apex to modules, which overrides the |
| // apex_available setting for that particular module to make |
| // it available for the apex regardless of its setting. |
| // TODO(b/147364041): remove this |
| func makeApexAvailableWhitelist() map[string][]string { |
| // The "Module separator"s below are employed to minimize merge conflicts. |
| m := make(map[string][]string) |
| // |
| // Module separator |
| // |
| m["com.android.adbd"] = []string{ |
| "libadbd_auth", |
| "libbuildversion", |
| "libcap", |
| "libmdnssd", |
| "libminijail", |
| "libminijail_gen_constants", |
| "libminijail_gen_constants_obj", |
| "libminijail_gen_syscall", |
| "libminijail_gen_syscall_obj", |
| "libminijail_generated", |
| "libpackagelistparser", |
| "libpcre2", |
| "libprocessgroup_headers", |
| } |
| // |
| // Module separator |
| // |
| artApexContents := []string{ |
| "art_cmdlineparser_headers", |
| "art_disassembler_headers", |
| "art_libartbase_headers", |
| "bionic_libc_platform_headers", |
| "core-repackaged-icu4j", |
| "cpp-define-generator-asm-support", |
| "cpp-define-generator-definitions", |
| "crtbegin_dynamic", |
| "crtbegin_dynamic1", |
| "crtbegin_so1", |
| "crtbrand", |
| "conscrypt.module.intra.core.api.stubs", |
| "dex2oat_headers", |
| "dt_fd_forward_export", |
| "icu4c_extra_headers", |
| "javavm_headers", |
| "jni_platform_headers", |
| "libPlatformProperties", |
| "libadbconnection_client", |
| "libadbconnection_server", |
| "libandroidicuinit", |
| "libart_runtime_headers_ndk", |
| "libartd-disassembler", |
| "libasync_safe", |
| "libdexfile_all_headers", |
| "libdexfile_external_headers", |
| "libdexfile_support", |
| "libdmabufinfo", |
| "libexpat", |
| "libfdlibm", |
| "libgtest_prod", |
| "libicui18n_headers", |
| "libicuuc", |
| "libicuuc_headers", |
| "libicuuc_stubdata", |
| "libjdwp_headers", |
| "liblz4", |
| "liblzma", |
| "libmeminfo", |
| "libnativebridge-headers", |
| "libnativehelper_header_only", |
| "libnativeloader-headers", |
| "libnpt_headers", |
| "libopenjdkjvmti_headers", |
| "libperfetto_client_experimental", |
| "libprocinfo", |
| "libunwind_llvm", |
| "libunwindstack", |
| "libv8", |
| "libv8base", |
| "libv8gen", |
| "libv8platform", |
| "libv8sampler", |
| "libv8src", |
| "libvixl", |
| "libvixld", |
| "libz", |
| "libziparchive", |
| "perfetto_trace_protos", |
| } |
| m["com.android.art.debug"] = artApexContents |
| m["com.android.art.release"] = artApexContents |
| // |
| // Module separator |
| // |
| m["com.android.bluetooth.updatable"] = []string{ |
| "android.hardware.audio.common@5.0", |
| "android.hardware.bluetooth.a2dp@1.0", |
| "android.hardware.bluetooth.audio@2.0", |
| "android.hardware.bluetooth@1.0", |
| "android.hardware.bluetooth@1.1", |
| "android.hardware.graphics.bufferqueue@1.0", |
| "android.hardware.graphics.bufferqueue@2.0", |
| "android.hardware.graphics.common@1.0", |
| "android.hardware.graphics.common@1.1", |
| "android.hardware.graphics.common@1.2", |
| "android.hardware.media@1.0", |
| "android.hidl.safe_union@1.0", |
| "android.hidl.token@1.0", |
| "android.hidl.token@1.0-utils", |
| "avrcp-target-service", |
| "avrcp_headers", |
| "bluetooth-protos-lite", |
| "bluetooth.mapsapi", |
| "com.android.vcard", |
| "dnsresolver_aidl_interface-V2-java", |
| "ipmemorystore-aidl-interfaces-V5-java", |
| "ipmemorystore-aidl-interfaces-java", |
| "internal_include_headers", |
| "lib-bt-packets", |
| "lib-bt-packets-avrcp", |
| "lib-bt-packets-base", |
| "libFraunhoferAAC", |
| "libaudio-a2dp-hw-utils", |
| "libaudio-hearing-aid-hw-utils", |
| "libbinder_headers", |
| "libbluetooth", |
| "libbluetooth-types", |
| "libbluetooth-types-header", |
| "libbluetooth_gd", |
| "libbluetooth_headers", |
| "libbluetooth_jni", |
| "libbt-audio-hal-interface", |
| "libbt-bta", |
| "libbt-common", |
| "libbt-hci", |
| "libbt-platform-protos-lite", |
| "libbt-protos-lite", |
| "libbt-sbc-decoder", |
| "libbt-sbc-encoder", |
| "libbt-stack", |
| "libbt-utils", |
| "libbtcore", |
| "libbtdevice", |
| "libbte", |
| "libbtif", |
| "libchrome", |
| "libevent", |
| "libfmq", |
| "libg722codec", |
| "libgtest_prod", |
| "libgui_headers", |
| "libmedia_headers", |
| "libmodpb64", |
| "libosi", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libstagefright_foundation_headers", |
| "libstagefright_headers", |
| "libstatslog", |
| "libstatssocket", |
| "libtinyxml2", |
| "libudrv-uipc", |
| "libz", |
| "media_plugin_headers", |
| "net-utils-services-common", |
| "netd_aidl_interface-unstable-java", |
| "netd_event_listener_interface-java", |
| "netlink-client", |
| "networkstack-aidl-interfaces-unstable-java", |
| "networkstack-client", |
| "sap-api-java-static", |
| "services.net", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.cellbroadcast"] = []string{"CellBroadcastApp", "CellBroadcastServiceModule"} |
| // |
| // Module separator |
| // |
| m["com.android.conscrypt"] = []string{ |
| "boringssl_self_test", |
| "libnativehelper_header_only", |
| "unsupportedappusage", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.extservices"] = []string{ |
| "flatbuffer_headers", |
| "liblua", |
| "libtextclassifier", |
| "libtextclassifier_hash_static", |
| "libtflite_static", |
| "libutf", |
| "libz_current", |
| "tensorflow_headers", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.cronet"] = []string{ |
| "cronet_impl_common_java", |
| "cronet_impl_native_java", |
| "cronet_impl_platform_java", |
| "libcronet.80.0.3986.0", |
| "org.chromium.net.cronet", |
| "org.chromium.net.cronet.xml", |
| "prebuilt_libcronet.80.0.3986.0", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.neuralnetworks"] = []string{ |
| "android.hardware.neuralnetworks@1.0", |
| "android.hardware.neuralnetworks@1.1", |
| "android.hardware.neuralnetworks@1.2", |
| "android.hardware.neuralnetworks@1.3", |
| "android.hidl.allocator@1.0", |
| "android.hidl.memory.token@1.0", |
| "android.hidl.memory@1.0", |
| "android.hidl.safe_union@1.0", |
| "libarect", |
| "libbuildversion", |
| "libmath", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libprocpartition", |
| "libsync", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.media"] = []string{ |
| "android.frameworks.bufferhub@1.0", |
| "android.hardware.cas.native@1.0", |
| "android.hardware.cas@1.0", |
| "android.hardware.configstore-utils", |
| "android.hardware.configstore@1.0", |
| "android.hardware.configstore@1.1", |
| "android.hardware.graphics.allocator@2.0", |
| "android.hardware.graphics.allocator@3.0", |
| "android.hardware.graphics.bufferqueue@1.0", |
| "android.hardware.graphics.bufferqueue@2.0", |
| "android.hardware.graphics.common@1.0", |
| "android.hardware.graphics.common@1.1", |
| "android.hardware.graphics.common@1.2", |
| "android.hardware.graphics.mapper@2.0", |
| "android.hardware.graphics.mapper@2.1", |
| "android.hardware.graphics.mapper@3.0", |
| "android.hardware.media.omx@1.0", |
| "android.hardware.media@1.0", |
| "android.hidl.allocator@1.0", |
| "android.hidl.memory.token@1.0", |
| "android.hidl.memory@1.0", |
| "android.hidl.token@1.0", |
| "android.hidl.token@1.0-utils", |
| "bionic_libc_platform_headers", |
| "gl_headers", |
| "libEGL", |
| "libEGL_blobCache", |
| "libEGL_getProcAddress", |
| "libFLAC", |
| "libFLAC-config", |
| "libFLAC-headers", |
| "libGLESv2", |
| "libaacextractor", |
| "libamrextractor", |
| "libarect", |
| "libasync_safe", |
| "libaudio_system_headers", |
| "libaudioclient", |
| "libaudioclient_headers", |
| "libaudiofoundation", |
| "libaudiofoundation_headers", |
| "libaudiomanager", |
| "libaudiopolicy", |
| "libaudioutils", |
| "libaudioutils_fixedfft", |
| "libbinder_headers", |
| "libbluetooth-types-header", |
| "libbufferhub", |
| "libbufferhub_headers", |
| "libbufferhubqueue", |
| "libc_malloc_debug_backtrace", |
| "libcamera_client", |
| "libcamera_metadata", |
| "libdexfile_external_headers", |
| "libdexfile_support", |
| "libdvr_headers", |
| "libexpat", |
| "libfifo", |
| "libflacextractor", |
| "libgrallocusage", |
| "libgraphicsenv", |
| "libgui", |
| "libgui_headers", |
| "libhardware_headers", |
| "libinput", |
| "liblzma", |
| "libmath", |
| "libmedia", |
| "libmedia_codeclist", |
| "libmedia_headers", |
| "libmedia_helper", |
| "libmedia_helper_headers", |
| "libmedia_midiiowrapper", |
| "libmedia_omx", |
| "libmediautils", |
| "libmidiextractor", |
| "libmkvextractor", |
| "libmp3extractor", |
| "libmp4extractor", |
| "libmpeg2extractor", |
| "libnativebase_headers", |
| "libnativebridge-headers", |
| "libnativebridge_lazy", |
| "libnativeloader-headers", |
| "libnativeloader_lazy", |
| "libnativewindow_headers", |
| "libnblog", |
| "liboggextractor", |
| "libpackagelistparser", |
| "libpcre2", |
| "libpdx", |
| "libpdx_default_transport", |
| "libpdx_headers", |
| "libpdx_uds", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libprocinfo", |
| "libsonivox", |
| "libspeexresampler", |
| "libspeexresampler", |
| "libstagefright_esds", |
| "libstagefright_flacdec", |
| "libstagefright_flacdec", |
| "libstagefright_foundation", |
| "libstagefright_foundation_headers", |
| "libstagefright_foundation_without_imemory", |
| "libstagefright_headers", |
| "libstagefright_id3", |
| "libstagefright_metadatautils", |
| "libstagefright_mpeg2extractor", |
| "libstagefright_mpeg2support", |
| "libsync", |
| "libui", |
| "libui_headers", |
| "libunwindstack", |
| "libvibrator", |
| "libvorbisidec", |
| "libwavextractor", |
| "libwebm", |
| "media_ndk_headers", |
| "media_plugin_headers", |
| "updatable-media", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.media.swcodec"] = []string{ |
| "android.frameworks.bufferhub@1.0", |
| "android.hardware.common-ndk_platform", |
| "android.hardware.configstore-utils", |
| "android.hardware.configstore@1.0", |
| "android.hardware.configstore@1.1", |
| "android.hardware.graphics.allocator@2.0", |
| "android.hardware.graphics.allocator@3.0", |
| "android.hardware.graphics.allocator@4.0", |
| "android.hardware.graphics.bufferqueue@1.0", |
| "android.hardware.graphics.bufferqueue@2.0", |
| "android.hardware.graphics.common-ndk_platform", |
| "android.hardware.graphics.common@1.0", |
| "android.hardware.graphics.common@1.1", |
| "android.hardware.graphics.common@1.2", |
| "android.hardware.graphics.mapper@2.0", |
| "android.hardware.graphics.mapper@2.1", |
| "android.hardware.graphics.mapper@3.0", |
| "android.hardware.graphics.mapper@4.0", |
| "android.hardware.media.bufferpool@2.0", |
| "android.hardware.media.c2@1.0", |
| "android.hardware.media.c2@1.1", |
| "android.hardware.media.omx@1.0", |
| "android.hardware.media@1.0", |
| "android.hardware.media@1.0", |
| "android.hidl.memory.token@1.0", |
| "android.hidl.memory@1.0", |
| "android.hidl.safe_union@1.0", |
| "android.hidl.token@1.0", |
| "android.hidl.token@1.0-utils", |
| "libEGL", |
| "libFLAC", |
| "libFLAC-config", |
| "libFLAC-headers", |
| "libFraunhoferAAC", |
| "libLibGuiProperties", |
| "libarect", |
| "libasync_safe", |
| "libaudio_system_headers", |
| "libaudioutils", |
| "libaudioutils", |
| "libaudioutils_fixedfft", |
| "libavcdec", |
| "libavcenc", |
| "libavservices_minijail", |
| "libavservices_minijail", |
| "libbinder_headers", |
| "libbinderthreadstateutils", |
| "libbluetooth-types-header", |
| "libbufferhub_headers", |
| "libc_scudo", |
| "libcap", |
| "libcodec2", |
| "libcodec2_headers", |
| "libcodec2_hidl@1.0", |
| "libcodec2_hidl@1.1", |
| "libcodec2_internal", |
| "libcodec2_soft_aacdec", |
| "libcodec2_soft_aacenc", |
| "libcodec2_soft_amrnbdec", |
| "libcodec2_soft_amrnbenc", |
| "libcodec2_soft_amrwbdec", |
| "libcodec2_soft_amrwbenc", |
| "libcodec2_soft_av1dec_gav1", |
| "libcodec2_soft_avcdec", |
| "libcodec2_soft_avcenc", |
| "libcodec2_soft_common", |
| "libcodec2_soft_flacdec", |
| "libcodec2_soft_flacenc", |
| "libcodec2_soft_g711alawdec", |
| "libcodec2_soft_g711mlawdec", |
| "libcodec2_soft_gsmdec", |
| "libcodec2_soft_h263dec", |
| "libcodec2_soft_h263enc", |
| "libcodec2_soft_hevcdec", |
| "libcodec2_soft_hevcenc", |
| "libcodec2_soft_mp3dec", |
| "libcodec2_soft_mpeg2dec", |
| "libcodec2_soft_mpeg4dec", |
| "libcodec2_soft_mpeg4enc", |
| "libcodec2_soft_opusdec", |
| "libcodec2_soft_opusenc", |
| "libcodec2_soft_rawdec", |
| "libcodec2_soft_vorbisdec", |
| "libcodec2_soft_vp8dec", |
| "libcodec2_soft_vp8enc", |
| "libcodec2_soft_vp9dec", |
| "libcodec2_soft_vp9enc", |
| "libcodec2_vndk", |
| "libdexfile_support", |
| "libdvr_headers", |
| "libfmq", |
| "libfmq", |
| "libgav1", |
| "libgralloctypes", |
| "libgrallocusage", |
| "libgraphicsenv", |
| "libgsm", |
| "libgui_bufferqueue_static", |
| "libgui_headers", |
| "libhardware", |
| "libhardware_headers", |
| "libhevcdec", |
| "libhevcenc", |
| "libion", |
| "libjpeg", |
| "liblzma", |
| "libmath", |
| "libmedia_codecserviceregistrant", |
| "libmedia_headers", |
| "libminijail", |
| "libminijail_gen_constants", |
| "libminijail_gen_constants_obj", |
| "libminijail_gen_syscall", |
| "libminijail_gen_syscall_obj", |
| "libminijail_generated", |
| "libmpeg2dec", |
| "libnativebase_headers", |
| "libnativebridge_lazy", |
| "libnativeloader_lazy", |
| "libnativewindow_headers", |
| "libopus", |
| "libpdx_headers", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libscudo_wrapper", |
| "libsfplugin_ccodec_utils", |
| "libspeexresampler", |
| "libstagefright_amrnb_common", |
| "libstagefright_amrnbdec", |
| "libstagefright_amrnbenc", |
| "libstagefright_amrwbdec", |
| "libstagefright_amrwbenc", |
| "libstagefright_bufferpool@2.0.1", |
| "libstagefright_bufferqueue_helper", |
| "libstagefright_enc_common", |
| "libstagefright_flacdec", |
| "libstagefright_foundation", |
| "libstagefright_foundation_headers", |
| "libstagefright_headers", |
| "libstagefright_m4vh263dec", |
| "libstagefright_m4vh263enc", |
| "libstagefright_mp3dec", |
| "libsync", |
| "libui", |
| "libui_headers", |
| "libunwindstack", |
| "libvorbisidec", |
| "libvpx", |
| "libyuv", |
| "libyuv_static", |
| "media_ndk_headers", |
| "media_plugin_headers", |
| "mediaswcodec", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.mediaprovider"] = []string{ |
| "MediaProvider", |
| "MediaProviderGoogle", |
| "fmtlib_ndk", |
| "libbase_ndk", |
| "libfuse", |
| "libfuse_jni", |
| "libnativehelper_header_only", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.permission"] = []string{ |
| "androidx.annotation_annotation", |
| "androidx.annotation_annotation-nodeps", |
| "androidx.lifecycle_lifecycle-common", |
| "androidx.lifecycle_lifecycle-common-java8", |
| "androidx.lifecycle_lifecycle-common-java8-nodeps", |
| "androidx.lifecycle_lifecycle-common-nodeps", |
| "kotlin-annotations", |
| "kotlin-stdlib", |
| "kotlin-stdlib-jdk7", |
| "kotlin-stdlib-jdk8", |
| "kotlinx-coroutines-android", |
| "kotlinx-coroutines-android-nodeps", |
| "kotlinx-coroutines-core", |
| "kotlinx-coroutines-core-nodeps", |
| "permissioncontroller-statsd", |
| "GooglePermissionController", |
| "PermissionController", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.runtime"] = []string{ |
| "bionic_libc_platform_headers", |
| "libarm-optimized-routines-math", |
| "libasync_safe", |
| "libasync_safe_headers", |
| "libc_aeabi", |
| "libc_bionic", |
| "libc_bionic_ndk", |
| "libc_bootstrap", |
| "libc_common", |
| "libc_common_shared", |
| "libc_common_static", |
| "libc_dns", |
| "libc_dynamic_dispatch", |
| "libc_fortify", |
| "libc_freebsd", |
| "libc_freebsd_large_stack", |
| "libc_gdtoa", |
| "libc_init_dynamic", |
| "libc_init_static", |
| "libc_jemalloc_wrapper", |
| "libc_netbsd", |
| "libc_nomalloc", |
| "libc_nopthread", |
| "libc_openbsd", |
| "libc_openbsd_large_stack", |
| "libc_openbsd_ndk", |
| "libc_pthread", |
| "libc_static_dispatch", |
| "libc_syscalls", |
| "libc_tzcode", |
| "libc_unwind_static", |
| "libdebuggerd", |
| "libdebuggerd_common_headers", |
| "libdebuggerd_handler_core", |
| "libdebuggerd_handler_fallback", |
| "libdexfile_external_headers", |
| "libdexfile_support", |
| "libdexfile_support_static", |
| "libdl_static", |
| "libgtest_prod", |
| "libjemalloc5", |
| "liblinker_main", |
| "liblinker_malloc", |
| "liblz4", |
| "liblzma", |
| "libprocessgroup_headers", |
| "libprocinfo", |
| "libpropertyinfoparser", |
| "libscudo", |
| "libstdc++", |
| "libsystemproperties", |
| "libtombstoned_client_static", |
| "libunwindstack", |
| "libz", |
| "libziparchive", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.resolv"] = []string{ |
| "dnsresolver_aidl_interface-unstable-ndk_platform", |
| "libgtest_prod", |
| "libnativehelper_header_only", |
| "libnetd_client_headers", |
| "libnetd_resolv", |
| "libnetdutils", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libstatslog_resolv", |
| "libstatspush_compat", |
| "libstatssocket", |
| "libstatssocket_headers", |
| "libsysutils", |
| "netd_event_listener_interface-ndk_platform", |
| "server_configurable_flags", |
| "stats_proto", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.tethering"] = []string{ |
| "libnativehelper_compat_libc++", |
| "android.hardware.tetheroffload.config@1.0", |
| "libcgrouprc", |
| "libcgrouprc_format", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libtetherutilsjni", |
| "libvndksupport", |
| "tethering-aidl-interfaces-java", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.wifi"] = []string{ |
| "PlatformProperties", |
| "android.hardware.wifi-V1.0-java", |
| "android.hardware.wifi-V1.0-java-constants", |
| "android.hardware.wifi-V1.1-java", |
| "android.hardware.wifi-V1.2-java", |
| "android.hardware.wifi-V1.3-java", |
| "android.hardware.wifi-V1.4-java", |
| "android.hardware.wifi.hostapd-V1.0-java", |
| "android.hardware.wifi.hostapd-V1.1-java", |
| "android.hardware.wifi.hostapd-V1.2-java", |
| "android.hardware.wifi.supplicant-V1.0-java", |
| "android.hardware.wifi.supplicant-V1.1-java", |
| "android.hardware.wifi.supplicant-V1.2-java", |
| "android.hardware.wifi.supplicant-V1.3-java", |
| "android.hidl.base-V1.0-java", |
| "android.hidl.manager-V1.0-java", |
| "android.hidl.manager-V1.1-java", |
| "android.hidl.manager-V1.2-java", |
| "androidx.annotation_annotation", |
| "androidx.annotation_annotation-nodeps", |
| "bouncycastle-unbundled", |
| "dnsresolver_aidl_interface-V2-java", |
| "error_prone_annotations", |
| "framework-wifi-pre-jarjar", |
| "framework-wifi-util-lib", |
| "ipmemorystore-aidl-interfaces-V3-java", |
| "ipmemorystore-aidl-interfaces-java", |
| "ksoap2", |
| "libnanohttpd", |
| "libprocessgroup", |
| "libprocessgroup_headers", |
| "libwifi-jni", |
| "net-utils-services-common", |
| "netd_aidl_interface-V2-java", |
| "netd_aidl_interface-unstable-java", |
| "netd_event_listener_interface-java", |
| "netlink-client", |
| "networkstack-aidl-interfaces-unstable-java", |
| "networkstack-client", |
| "services.net", |
| "wifi-lite-protos", |
| "wifi-nano-protos", |
| "wifi-service-pre-jarjar", |
| "wifi-service-resources", |
| "prebuilt_androidx.annotation_annotation-nodeps", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.sdkext"] = []string{ |
| "fmtlib_ndk", |
| "libbase_ndk", |
| "libprotobuf-cpp-lite-ndk", |
| } |
| // |
| // Module separator |
| // |
| m["com.android.os.statsd"] = []string{ |
| "libprocessgroup_headers", |
| "libstatssocket", |
| } |
| // |
| // Module separator |
| // |
| m["//any"] = []string{ |
| "libatomic", |
| "libclang_rt", |
| "libgcc_stripped", |
| "libprofile-clang-extras", |
| "libprofile-clang-extras_ndk", |
| "libprofile-extras", |
| "libprofile-extras_ndk", |
| "libunwind_llvm", |
| } |
| return m |
| } |
| |
| func init() { |
| android.AddNeverAllowRules(android.NeverAllow(). |
| ModuleType("apex"). |
| With("updatable", "true"). |
| With("min_sdk_version", ""). |
| Because("All updatable apexes should set min_sdk_version.")) |
| |
| android.RegisterModuleType("apex", BundleFactory) |
| android.RegisterModuleType("apex_test", testApexBundleFactory) |
| android.RegisterModuleType("apex_vndk", vndkApexBundleFactory) |
| android.RegisterModuleType("apex_defaults", defaultsFactory) |
| android.RegisterModuleType("prebuilt_apex", PrebuiltFactory) |
| android.RegisterModuleType("override_apex", overrideApexFactory) |
| |
| android.PreDepsMutators(RegisterPreDepsMutators) |
| android.PostDepsMutators(RegisterPostDepsMutators) |
| |
| android.RegisterMakeVarsProvider(pctx, func(ctx android.MakeVarsContext) { |
| apexFileContextsInfos := apexFileContextsInfos(ctx.Config()) |
| sort.Strings(*apexFileContextsInfos) |
| ctx.Strict("APEX_FILE_CONTEXTS_INFOS", strings.Join(*apexFileContextsInfos, " ")) |
| }) |
| } |
| |
| func RegisterPreDepsMutators(ctx android.RegisterMutatorsContext) { |
| ctx.TopDown("apex_vndk", apexVndkMutator).Parallel() |
| ctx.BottomUp("apex_vndk_deps", apexVndkDepsMutator).Parallel() |
| } |
| |
| func RegisterPostDepsMutators(ctx android.RegisterMutatorsContext) { |
| ctx.TopDown("apex_deps", apexDepsMutator) |
| ctx.BottomUp("apex", apexMutator).Parallel() |
| ctx.BottomUp("apex_flattened", apexFlattenedMutator).Parallel() |
| ctx.BottomUp("apex_uses", apexUsesMutator).Parallel() |
| } |
| |
| // Mark the direct and transitive dependencies of apex bundles so that they |
| // can be built for the apex bundles. |
| func apexDepsMutator(mctx android.TopDownMutatorContext) { |
| var apexBundles []android.ApexInfo |
| var directDep bool |
| if a, ok := mctx.Module().(*apexBundle); ok && !a.vndkApex { |
| apexBundles = []android.ApexInfo{android.ApexInfo{ |
| ApexName: mctx.ModuleName(), |
| MinSdkVersion: a.minSdkVersion(mctx), |
| }} |
| directDep = true |
| } else if am, ok := mctx.Module().(android.ApexModule); ok { |
| apexBundles = am.ApexVariations() |
| directDep = false |
| } |
| |
| if len(apexBundles) == 0 { |
| return |
| } |
| |
| cur := mctx.Module().(interface { |
| DepIsInSameApex(android.BaseModuleContext, android.Module) bool |
| }) |
| |
| mctx.VisitDirectDeps(func(child android.Module) { |
| depName := mctx.OtherModuleName(child) |
| if am, ok := child.(android.ApexModule); ok && am.CanHaveApexVariants() && |
| cur.DepIsInSameApex(mctx, child) { |
| android.UpdateApexDependency(apexBundles, depName, directDep) |
| am.BuildForApexes(apexBundles) |
| } |
| }) |
| } |
| |
| // Create apex variations if a module is included in APEX(s). |
| func apexMutator(mctx android.BottomUpMutatorContext) { |
| if am, ok := mctx.Module().(android.ApexModule); ok && am.CanHaveApexVariants() { |
| am.CreateApexVariations(mctx) |
| } else if a, ok := mctx.Module().(*apexBundle); ok && !a.vndkApex { |
| // apex bundle itself is mutated so that it and its modules have same |
| // apex variant. |
| apexBundleName := mctx.ModuleName() |
| mctx.CreateVariations(apexBundleName) |
| } else if o, ok := mctx.Module().(*OverrideApex); ok { |
| apexBundleName := o.GetOverriddenModuleName() |
| if apexBundleName == "" { |
| mctx.ModuleErrorf("base property is not set") |
| return |
| } |
| mctx.CreateVariations(apexBundleName) |
| } |
| |
| } |
| |
| var ( |
| apexFileContextsInfosKey = android.NewOnceKey("apexFileContextsInfosKey") |
| apexFileContextsInfosMutex sync.Mutex |
| ) |
| |
| func apexFileContextsInfos(config android.Config) *[]string { |
| return config.Once(apexFileContextsInfosKey, func() interface{} { |
| return &[]string{} |
| }).(*[]string) |
| } |
| |
| func addFlattenedFileContextsInfos(ctx android.BaseModuleContext, fileContextsInfo string) { |
| apexFileContextsInfosMutex.Lock() |
| defer apexFileContextsInfosMutex.Unlock() |
| apexFileContextsInfos := apexFileContextsInfos(ctx.Config()) |
| *apexFileContextsInfos = append(*apexFileContextsInfos, fileContextsInfo) |
| } |
| |
| func apexFlattenedMutator(mctx android.BottomUpMutatorContext) { |
| if ab, ok := mctx.Module().(*apexBundle); ok { |
| var variants []string |
| switch proptools.StringDefault(ab.properties.Payload_type, "image") { |
| case "image": |
| variants = append(variants, imageApexType, flattenedApexType) |
| case "zip": |
| variants = append(variants, zipApexType) |
| case "both": |
| variants = append(variants, imageApexType, zipApexType, flattenedApexType) |
| default: |
| mctx.PropertyErrorf("type", "%q is not one of \"image\", \"zip\", or \"both\".", *ab.properties.Payload_type) |
| return |
| } |
| |
| modules := mctx.CreateLocalVariations(variants...) |
| |
| for i, v := range variants { |
| switch v { |
| case imageApexType: |
| modules[i].(*apexBundle).properties.ApexType = imageApex |
| case zipApexType: |
| modules[i].(*apexBundle).properties.ApexType = zipApex |
| case flattenedApexType: |
| modules[i].(*apexBundle).properties.ApexType = flattenedApex |
| if !mctx.Config().FlattenApex() && ab.Platform() { |
| modules[i].(*apexBundle).MakeAsSystemExt() |
| } |
| } |
| } |
| } else if _, ok := mctx.Module().(*OverrideApex); ok { |
| mctx.CreateVariations(imageApexType, flattenedApexType) |
| } |
| } |
| |
| func apexUsesMutator(mctx android.BottomUpMutatorContext) { |
| if ab, ok := mctx.Module().(*apexBundle); ok { |
| mctx.AddFarVariationDependencies(nil, usesTag, ab.properties.Uses...) |
| } |
| } |
| |
| var ( |
| useVendorWhitelistKey = android.NewOnceKey("useVendorWhitelist") |
| ) |
| |
| // useVendorWhitelist returns the list of APEXes which are allowed to use_vendor. |
| // When use_vendor is used, native modules are built with __ANDROID_VNDK__ and __ANDROID_APEX__, |
| // which may cause compatibility issues. (e.g. libbinder) |
| // Even though libbinder restricts its availability via 'apex_available' property and relies on |
| // yet another macro __ANDROID_APEX_<NAME>__, we restrict usage of "use_vendor:" from other APEX modules |
| // to avoid similar problems. |
| func useVendorWhitelist(config android.Config) []string { |
| return config.Once(useVendorWhitelistKey, func() interface{} { |
| return []string{ |
| // swcodec uses "vendor" variants for smaller size |
| "com.android.media.swcodec", |
| "test_com.android.media.swcodec", |
| } |
| }).([]string) |
| } |
| |
| // setUseVendorWhitelistForTest overrides useVendorWhitelist and must be |
| // called before the first call to useVendorWhitelist() |
| func setUseVendorWhitelistForTest(config android.Config, whitelist []string) { |
| config.Once(useVendorWhitelistKey, func() interface{} { |
| return whitelist |
| }) |
| } |
| |
| type apexNativeDependencies struct { |
| // List of native libraries |
| Native_shared_libs []string |
| |
| // List of native executables |
| Binaries []string |
| |
| // List of native tests |
| Tests []string |
| } |
| |
| type apexMultilibProperties struct { |
| // Native dependencies whose compile_multilib is "first" |
| First apexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "both" |
| Both apexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "prefer32" |
| Prefer32 apexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "32" |
| Lib32 apexNativeDependencies |
| |
| // Native dependencies whose compile_multilib is "64" |
| Lib64 apexNativeDependencies |
| } |
| |
| type apexBundleProperties struct { |
| // Json manifest file describing meta info of this APEX bundle. Default: |
| // "apex_manifest.json" |
| Manifest *string `android:"path"` |
| |
| // AndroidManifest.xml file used for the zip container of this APEX bundle. |
| // If unspecified, a default one is automatically generated. |
| AndroidManifest *string `android:"path"` |
| |
| // Canonical name of the APEX bundle. Used to determine the path to the activated APEX on |
| // device (/apex/<apex_name>). |
| // If unspecified, defaults to the value of name. |
| Apex_name *string |
| |
| // Determines the file contexts file for setting security context to each file in this APEX bundle. |
| // For platform APEXes, this should points to a file under /system/sepolicy |
| // Default: /system/sepolicy/apex/<module_name>_file_contexts. |
| File_contexts *string `android:"path"` |
| |
| // List of native shared libs that are embedded inside this APEX bundle |
| Native_shared_libs []string |
| |
| // List of executables that are embedded inside this APEX bundle |
| Binaries []string |
| |
| // List of java libraries that are embedded inside this APEX bundle |
| Java_libs []string |
| |
| // List of prebuilt files that are embedded inside this APEX bundle |
| Prebuilts []string |
| |
| // List of tests that are embedded inside this APEX bundle |
| Tests []string |
| |
| // Name of the apex_key module that provides the private key to sign APEX |
| Key *string |
| |
| // The type of APEX to build. Controls what the APEX payload is. Either |
| // 'image', 'zip' or 'both'. Default: 'image'. |
| Payload_type *string |
| |
| // The name of a certificate in the default certificate directory, blank to use the default product certificate, |
| // or an android_app_certificate module name in the form ":module". |
| Certificate *string |
| |
| // Whether this APEX is installable to one of the partitions. Default: true. |
| Installable *bool |
| |
| // For native libraries and binaries, use the vendor variant instead of the core (platform) variant. |
| // Default is false. |
| Use_vendor *bool |
| |
| // For telling the apex to ignore special handling for system libraries such as bionic. Default is false. |
| Ignore_system_library_special_case *bool |
| |
| Multilib apexMultilibProperties |
| |
| // List of sanitizer names that this APEX is enabled for |
| SanitizerNames []string `blueprint:"mutated"` |
| |
| PreventInstall bool `blueprint:"mutated"` |
| |
| HideFromMake bool `blueprint:"mutated"` |
| |
| // Indicates this APEX provides C++ shared libaries to other APEXes. Default: false. |
| Provide_cpp_shared_libs *bool |
| |
| // List of providing APEXes' names so that this APEX can depend on provided shared libraries. |
| Uses []string |
| |
| // A txt file containing list of files that are whitelisted to be included in this APEX. |
| Whitelisted_files *string |
| |
| // package format of this apex variant; could be non-flattened, flattened, or zip. |
| // imageApex, zipApex or flattened |
| ApexType apexPackaging `blueprint:"mutated"` |
| |
| // List of SDKs that are used to build this APEX. A reference to an SDK should be either |
| // `name#version` or `name` which is an alias for `name#current`. If left empty, `platform#current` |
| // is implied. This value affects all modules included in this APEX. In other words, they are |
| // also built with the SDKs specified here. |
| Uses_sdks []string |
| |
| // Whenever apex_payload.img of the APEX should include dm-verity hashtree. |
| // Should be only used in tests#. |
| Test_only_no_hashtree *bool |
| |
| IsCoverageVariant bool `blueprint:"mutated"` |
| |
| // Whether this APEX is considered updatable or not. When set to true, this will enforce additional |
| // rules for making sure that the APEX is truely updatable. This will also disable the size optimizations |
| // like symlinking to the system libs. Default is false. |
| Updatable *bool |
| |
| // The minimum SDK version that this apex must be compatible with. |
| Min_sdk_version *string |
| } |
| |
| type apexTargetBundleProperties struct { |
| Target struct { |
| // Multilib properties only for android. |
| Android struct { |
| Multilib apexMultilibProperties |
| } |
| |
| // Multilib properties only for host. |
| Host struct { |
| Multilib apexMultilibProperties |
| } |
| |
| // Multilib properties only for host linux_bionic. |
| Linux_bionic struct { |
| Multilib apexMultilibProperties |
| } |
| |
| // Multilib properties only for host linux_glibc. |
| Linux_glibc struct { |
| Multilib apexMultilibProperties |
| } |
| } |
| } |
| |
| type overridableProperties struct { |
| // List of APKs to package inside APEX |
| Apps []string |
| |
| // Names of modules to be overridden. Listed modules can only be other binaries |
| // (in Make or Soong). |
| // This does not completely prevent installation of the overridden binaries, but if both |
| // binaries would be installed by default (in PRODUCT_PACKAGES) the other binary will be removed |
| // from PRODUCT_PACKAGES. |
| Overrides []string |
| |
| // Logging Parent value |
| Logging_parent string |
| |
| // Apex Container Package Name. |
| // Override value for attribute package:name in AndroidManifest.xml |
| Package_name string |
| } |
| |
| type apexPackaging int |
| |
| const ( |
| imageApex apexPackaging = iota |
| zipApex |
| flattenedApex |
| ) |
| |
| // The suffix for the output "file", not the module |
| func (a apexPackaging) suffix() string { |
| switch a { |
| case imageApex: |
| return imageApexSuffix |
| case zipApex: |
| return zipApexSuffix |
| default: |
| panic(fmt.Errorf("unknown APEX type %d", a)) |
| } |
| } |
| |
| func (a apexPackaging) name() string { |
| switch a { |
| case imageApex: |
| return imageApexType |
| case zipApex: |
| return zipApexType |
| default: |
| panic(fmt.Errorf("unknown APEX type %d", a)) |
| } |
| } |
| |
| type apexFileClass int |
| |
| const ( |
| etc apexFileClass = iota |
| nativeSharedLib |
| nativeExecutable |
| shBinary |
| pyBinary |
| goBinary |
| javaSharedLib |
| nativeTest |
| app |
| ) |
| |
| func (class apexFileClass) NameInMake() string { |
| switch class { |
| case etc: |
| return "ETC" |
| case nativeSharedLib: |
| return "SHARED_LIBRARIES" |
| case nativeExecutable, shBinary, pyBinary, goBinary: |
| return "EXECUTABLES" |
| case javaSharedLib: |
| return "JAVA_LIBRARIES" |
| case nativeTest: |
| return "NATIVE_TESTS" |
| case app: |
| // b/142537672 Why isn't this APP? We want to have full control over |
| // the paths and file names of the apk file under the flattend APEX. |
| // If this is set to APP, then the paths and file names are modified |
| // by the Make build system. For example, it is installed to |
| // /system/apex/<apexname>/app/<Appname>/<apexname>.<Appname>/ instead of |
| // /system/apex/<apexname>/app/<Appname> because the build system automatically |
| // appends module name (which is <apexname>.<Appname> to the path. |
| return "ETC" |
| default: |
| panic(fmt.Errorf("unknown class %d", class)) |
| } |
| } |
| |
| // apexFile represents a file in an APEX bundle |
| type apexFile struct { |
| builtFile android.Path |
| moduleName string |
| installDir string |
| class apexFileClass |
| module android.Module |
| // list of symlinks that will be created in installDir that point to this apexFile |
| symlinks []string |
| transitiveDep bool |
| moduleDir string |
| |
| requiredModuleNames []string |
| targetRequiredModuleNames []string |
| hostRequiredModuleNames []string |
| |
| jacocoReportClassesFile android.Path // only for javalibs and apps |
| certificate java.Certificate // only for apps |
| overriddenPackageName string // only for apps |
| } |
| |
| func newApexFile(ctx android.BaseModuleContext, builtFile android.Path, moduleName string, installDir string, class apexFileClass, module android.Module) apexFile { |
| ret := apexFile{ |
| builtFile: builtFile, |
| moduleName: moduleName, |
| installDir: installDir, |
| class: class, |
| module: module, |
| } |
| if module != nil { |
| ret.moduleDir = ctx.OtherModuleDir(module) |
| ret.requiredModuleNames = module.RequiredModuleNames() |
| ret.targetRequiredModuleNames = module.TargetRequiredModuleNames() |
| ret.hostRequiredModuleNames = module.HostRequiredModuleNames() |
| } |
| return ret |
| } |
| |
| func (af *apexFile) Ok() bool { |
| return af.builtFile != nil && af.builtFile.String() != "" |
| } |
| |
| // Path() returns path of this apex file relative to the APEX root |
| func (af *apexFile) Path() string { |
| return filepath.Join(af.installDir, af.builtFile.Base()) |
| } |
| |
| // SymlinkPaths() returns paths of the symlinks (if any) relative to the APEX root |
| func (af *apexFile) SymlinkPaths() []string { |
| var ret []string |
| for _, symlink := range af.symlinks { |
| ret = append(ret, filepath.Join(af.installDir, symlink)) |
| } |
| return ret |
| } |
| |
| func (af *apexFile) AvailableToPlatform() bool { |
| if af.module == nil { |
| return false |
| } |
| if am, ok := af.module.(android.ApexModule); ok { |
| return am.AvailableFor(android.AvailableToPlatform) |
| } |
| return false |
| } |
| |
| type depInfo struct { |
| to string |
| from []string |
| isExternal bool |
| } |
| |
| type apexBundle struct { |
| android.ModuleBase |
| android.DefaultableModuleBase |
| android.OverridableModuleBase |
| android.SdkBase |
| |
| properties apexBundleProperties |
| targetProperties apexTargetBundleProperties |
| overridableProperties overridableProperties |
| |
| // specific to apex_vndk modules |
| vndkProperties apexVndkProperties |
| |
| bundleModuleFile android.WritablePath |
| outputFile android.WritablePath |
| installDir android.InstallPath |
| |
| prebuiltFileToDelete string |
| |
| public_key_file android.Path |
| private_key_file android.Path |
| |
| container_certificate_file android.Path |
| container_private_key_file android.Path |
| |
| fileContexts android.Path |
| |
| // list of files to be included in this apex |
| filesInfo []apexFile |
| |
| // list of module names that should be installed along with this APEX |
| requiredDeps []string |
| |
| // list of module names that this APEX is including (to be shown via *-deps-info target) |
| depInfos map[string]depInfo |
| |
| testApex bool |
| vndkApex bool |
| artApex bool |
| primaryApexType bool |
| |
| manifestJsonOut android.WritablePath |
| manifestPbOut android.WritablePath |
| |
| // list of commands to create symlinks for backward compatibility. |
| // these commands will be attached as LOCAL_POST_INSTALL_CMD to |
| // apex package itself(for unflattened build) or apex_manifest(for flattened build) |
| // so that compat symlinks are always installed regardless of TARGET_FLATTEN_APEX setting. |
| compatSymlinks []string |
| |
| // Suffix of module name in Android.mk |
| // ".flattened", ".apex", ".zipapex", or "" |
| suffix string |
| |
| installedFilesFile android.WritablePath |
| |
| // Whether to create symlink to the system file instead of having a file |
| // inside the apex or not |
| linkToSystemLib bool |
| |
| // Struct holding the merged notice file paths in different formats |
| mergedNotices android.NoticeOutputs |
| } |
| |
| func addDependenciesForNativeModules(ctx android.BottomUpMutatorContext, |
| native_shared_libs []string, binaries []string, tests []string, |
| target android.Target, imageVariation string) { |
| // Use *FarVariation* to be able to depend on modules having |
| // conflicting variations with this module. This is required since |
| // arch variant of an APEX bundle is 'common' but it is 'arm' or 'arm64' |
| // for native shared libs. |
| ctx.AddFarVariationDependencies(append(target.Variations(), []blueprint.Variation{ |
| {Mutator: "image", Variation: imageVariation}, |
| {Mutator: "link", Variation: "shared"}, |
| {Mutator: "version", Variation: ""}, // "" is the non-stub variant |
| }...), sharedLibTag, native_shared_libs...) |
| |
| ctx.AddFarVariationDependencies(append(target.Variations(), |
| blueprint.Variation{Mutator: "image", Variation: imageVariation}), |
| executableTag, binaries...) |
| |
| ctx.AddFarVariationDependencies(append(target.Variations(), []blueprint.Variation{ |
| {Mutator: "image", Variation: imageVariation}, |
| {Mutator: "test_per_src", Variation: ""}, // "" is the all-tests variant |
| }...), testTag, tests...) |
| } |
| |
| func (a *apexBundle) combineProperties(ctx android.BottomUpMutatorContext) { |
| if ctx.Os().Class == android.Device { |
| proptools.AppendProperties(&a.properties.Multilib, &a.targetProperties.Target.Android.Multilib, nil) |
| } else { |
| proptools.AppendProperties(&a.properties.Multilib, &a.targetProperties.Target.Host.Multilib, nil) |
| if ctx.Os().Bionic() { |
| proptools.AppendProperties(&a.properties.Multilib, &a.targetProperties.Target.Linux_bionic.Multilib, nil) |
| } else { |
| proptools.AppendProperties(&a.properties.Multilib, &a.targetProperties.Target.Linux_glibc.Multilib, nil) |
| } |
| } |
| } |
| |
| func (a *apexBundle) DepsMutator(ctx android.BottomUpMutatorContext) { |
| if proptools.Bool(a.properties.Use_vendor) && !android.InList(a.Name(), useVendorWhitelist(ctx.Config())) { |
| ctx.PropertyErrorf("use_vendor", "not allowed to set use_vendor: true") |
| } |
| |
| targets := ctx.MultiTargets() |
| config := ctx.DeviceConfig() |
| |
| a.combineProperties(ctx) |
| |
| has32BitTarget := false |
| for _, target := range targets { |
| if target.Arch.ArchType.Multilib == "lib32" { |
| has32BitTarget = true |
| } |
| } |
| for i, target := range targets { |
| // When multilib.* is omitted for native_shared_libs, it implies |
| // multilib.both. |
| ctx.AddFarVariationDependencies(append(target.Variations(), []blueprint.Variation{ |
| {Mutator: "image", Variation: a.getImageVariation(config)}, |
| {Mutator: "link", Variation: "shared"}, |
| }...), sharedLibTag, a.properties.Native_shared_libs...) |
| |
| // When multilib.* is omitted for tests, it implies |
| // multilib.both. |
| ctx.AddFarVariationDependencies(append(target.Variations(), []blueprint.Variation{ |
| {Mutator: "image", Variation: a.getImageVariation(config)}, |
| {Mutator: "test_per_src", Variation: ""}, // "" is the all-tests variant |
| }...), testTag, a.properties.Tests...) |
| |
| // Add native modules targetting both ABIs |
| addDependenciesForNativeModules(ctx, |
| a.properties.Multilib.Both.Native_shared_libs, |
| a.properties.Multilib.Both.Binaries, |
| a.properties.Multilib.Both.Tests, |
| target, |
| a.getImageVariation(config)) |
| |
| isPrimaryAbi := i == 0 |
| if isPrimaryAbi { |
| // When multilib.* is omitted for binaries, it implies |
| // multilib.first. |
| ctx.AddFarVariationDependencies(append(target.Variations(), |
| blueprint.Variation{Mutator: "image", Variation: a.getImageVariation(config)}), |
| executableTag, a.properties.Binaries...) |
| |
| // Add native modules targetting the first ABI |
| addDependenciesForNativeModules(ctx, |
| a.properties.Multilib.First.Native_shared_libs, |
| a.properties.Multilib.First.Binaries, |
| a.properties.Multilib.First.Tests, |
| target, |
| a.getImageVariation(config)) |
| } |
| |
| switch target.Arch.ArchType.Multilib { |
| case "lib32": |
| // Add native modules targetting 32-bit ABI |
| addDependenciesForNativeModules(ctx, |
| a.properties.Multilib.Lib32.Native_shared_libs, |
| a.properties.Multilib.Lib32.Binaries, |
| a.properties.Multilib.Lib32.Tests, |
| target, |
| a.getImageVariation(config)) |
| |
| addDependenciesForNativeModules(ctx, |
| a.properties.Multilib.Prefer32.Native_shared_libs, |
| a.properties.Multilib.Prefer32.Binaries, |
| a.properties.Multilib.Prefer32.Tests, |
| target, |
| a.getImageVariation(config)) |
| case "lib64": |
| // Add native modules targetting 64-bit ABI |
| addDependenciesForNativeModules(ctx, |
| a.properties.Multilib.Lib64.Native_shared_libs, |
| a.properties.Multilib.Lib64.Binaries, |
| a.properties.Multilib.Lib64.Tests, |
| target, |
| a.getImageVariation(config)) |
| |
| if !has32BitTarget { |
| addDependenciesForNativeModules(ctx, |
| a.properties.Multilib.Prefer32.Native_shared_libs, |
| a.properties.Multilib.Prefer32.Binaries, |
| a.properties.Multilib.Prefer32.Tests, |
| target, |
| a.getImageVariation(config)) |
| } |
| |
| if strings.HasPrefix(ctx.ModuleName(), "com.android.runtime") && target.Os.Class == android.Device { |
| for _, sanitizer := range ctx.Config().SanitizeDevice() { |
| if sanitizer == "hwaddress" { |
| addDependenciesForNativeModules(ctx, |
| []string{"libclang_rt.hwasan-aarch64-android"}, |
| nil, nil, target, a.getImageVariation(config)) |
| break |
| } |
| } |
| } |
| } |
| |
| } |
| |
| // For prebuilt_etc, use the first variant (64 on 64/32bit device, |
| // 32 on 32bit device) regardless of the TARGET_PREFER_* setting. |
| // b/144532908 |
| archForPrebuiltEtc := config.Arches()[0] |
| for _, arch := range config.Arches() { |
| // Prefer 64-bit arch if there is any |
| if arch.ArchType.Multilib == "lib64" { |
| archForPrebuiltEtc = arch |
| break |
| } |
| } |
| ctx.AddFarVariationDependencies([]blueprint.Variation{ |
| {Mutator: "os", Variation: ctx.Os().String()}, |
| {Mutator: "arch", Variation: archForPrebuiltEtc.String()}, |
| }, prebuiltTag, a.properties.Prebuilts...) |
| |
| ctx.AddFarVariationDependencies(ctx.Config().AndroidCommonTarget.Variations(), |
| javaLibTag, a.properties.Java_libs...) |
| |
| // With EMMA_INSTRUMENT_FRAMEWORK=true the ART boot image includes jacoco library. |
| if a.artApex && ctx.Config().IsEnvTrue("EMMA_INSTRUMENT_FRAMEWORK") { |
| ctx.AddFarVariationDependencies(ctx.Config().AndroidCommonTarget.Variations(), |
| javaLibTag, "jacocoagent") |
| } |
| |
| if String(a.properties.Key) == "" { |
| ctx.ModuleErrorf("key is missing") |
| return |
| } |
| ctx.AddDependency(ctx.Module(), keyTag, String(a.properties.Key)) |
| |
| cert := android.SrcIsModule(a.getCertString(ctx)) |
| if cert != "" { |
| ctx.AddDependency(ctx.Module(), certificateTag, cert) |
| } |
| |
| // TODO(jiyong): ensure that all apexes are with non-empty uses_sdks |
| if len(a.properties.Uses_sdks) > 0 { |
| sdkRefs := []android.SdkRef{} |
| for _, str := range a.properties.Uses_sdks { |
| parsed := android.ParseSdkRef(ctx, str, "uses_sdks") |
| sdkRefs = append(sdkRefs, parsed) |
| } |
| a.BuildWithSdks(sdkRefs) |
| } |
| } |
| |
| func (a *apexBundle) OverridablePropertiesDepsMutator(ctx android.BottomUpMutatorContext) { |
| ctx.AddFarVariationDependencies(ctx.Config().AndroidCommonTarget.Variations(), |
| androidAppTag, a.overridableProperties.Apps...) |
| } |
| |
| func (a *apexBundle) DepIsInSameApex(ctx android.BaseModuleContext, dep android.Module) bool { |
| // direct deps of an APEX bundle are all part of the APEX bundle |
| return true |
| } |
| |
| func (a *apexBundle) getCertString(ctx android.BaseModuleContext) string { |
| moduleName := ctx.ModuleName() |
| // VNDK APEXes share the same certificate. To avoid adding a new VNDK version to the OVERRIDE_* list, |
| // we check with the pseudo module name to see if its certificate is overridden. |
| if a.vndkApex { |
| moduleName = vndkApexName |
| } |
| certificate, overridden := ctx.DeviceConfig().OverrideCertificateFor(moduleName) |
| if overridden { |
| return ":" + certificate |
| } |
| return String(a.properties.Certificate) |
| } |
| |
| func (a *apexBundle) OutputFiles(tag string) (android.Paths, error) { |
| switch tag { |
| case "": |
| return android.Paths{a.outputFile}, nil |
| default: |
| return nil, fmt.Errorf("unsupported module reference tag %q", tag) |
| } |
| } |
| |
| func (a *apexBundle) installable() bool { |
| return !a.properties.PreventInstall && (a.properties.Installable == nil || proptools.Bool(a.properties.Installable)) |
| } |
| |
| func (a *apexBundle) testOnlyShouldSkipHashtreeGeneration() bool { |
| return proptools.Bool(a.properties.Test_only_no_hashtree) |
| } |
| |
| func (a *apexBundle) getImageVariation(config android.DeviceConfig) string { |
| if a.vndkApex { |
| return cc.VendorVariationPrefix + a.vndkVersion(config) |
| } |
| if config.VndkVersion() != "" && proptools.Bool(a.properties.Use_vendor) { |
| return cc.VendorVariationPrefix + config.PlatformVndkVersion() |
| } else { |
| return android.CoreVariation |
| } |
| } |
| |
| func (a *apexBundle) EnableSanitizer(sanitizerName string) { |
| if !android.InList(sanitizerName, a.properties.SanitizerNames) { |
| a.properties.SanitizerNames = append(a.properties.SanitizerNames, sanitizerName) |
| } |
| } |
| |
| func (a *apexBundle) IsSanitizerEnabled(ctx android.BaseModuleContext, sanitizerName string) bool { |
| if android.InList(sanitizerName, a.properties.SanitizerNames) { |
| return true |
| } |
| |
| // Then follow the global setting |
| globalSanitizerNames := []string{} |
| if a.Host() { |
| globalSanitizerNames = ctx.Config().SanitizeHost() |
| } else { |
| arches := ctx.Config().SanitizeDeviceArch() |
| if len(arches) == 0 || android.InList(a.Arch().ArchType.Name, arches) { |
| globalSanitizerNames = ctx.Config().SanitizeDevice() |
| } |
| } |
| return android.InList(sanitizerName, globalSanitizerNames) |
| } |
| |
| func (a *apexBundle) IsNativeCoverageNeeded(ctx android.BaseModuleContext) bool { |
| return ctx.Device() && (ctx.DeviceConfig().NativeCoverageEnabled() || ctx.DeviceConfig().ClangCoverageEnabled()) |
| } |
| |
| func (a *apexBundle) PreventInstall() { |
| a.properties.PreventInstall = true |
| } |
| |
| func (a *apexBundle) HideFromMake() { |
| a.properties.HideFromMake = true |
| } |
| |
| func (a *apexBundle) MarkAsCoverageVariant(coverage bool) { |
| a.properties.IsCoverageVariant = coverage |
| } |
| |
| // TODO(jiyong) move apexFileFor* close to the apexFile type definition |
| func apexFileForNativeLibrary(ctx android.BaseModuleContext, ccMod *cc.Module, handleSpecialLibs bool) apexFile { |
| // Decide the APEX-local directory by the multilib of the library |
| // In the future, we may query this to the module. |
| var dirInApex string |
| switch ccMod.Arch().ArchType.Multilib { |
| case "lib32": |
| dirInApex = "lib" |
| case "lib64": |
| dirInApex = "lib64" |
| } |
| dirInApex = filepath.Join(dirInApex, ccMod.RelativeInstallPath()) |
| if ccMod.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, ccMod.Target().NativeBridgeRelativePath) |
| } |
| if handleSpecialLibs && cc.InstallToBootstrap(ccMod.BaseModuleName(), ctx.Config()) { |
| // Special case for Bionic libs and other libs installed with them. This is |
| // to prevent those libs from being included in the search path |
| // /apex/com.android.runtime/${LIB}. This exclusion is required because |
| // those libs in the Runtime APEX are available via the legacy paths in |
| // /system/lib/. By the init process, the libs in the APEX are bind-mounted |
| // to the legacy paths and thus will be loaded into the default linker |
| // namespace (aka "platform" namespace). If the libs are directly in |
| // /apex/com.android.runtime/${LIB} then the same libs will be loaded again |
| // into the runtime linker namespace, which will result in double loading of |
| // them, which isn't supported. |
| dirInApex = filepath.Join(dirInApex, "bionic") |
| } |
| |
| fileToCopy := ccMod.OutputFile().Path() |
| return newApexFile(ctx, fileToCopy, ccMod.Name(), dirInApex, nativeSharedLib, ccMod) |
| } |
| |
| func apexFileForExecutable(ctx android.BaseModuleContext, cc *cc.Module) apexFile { |
| dirInApex := filepath.Join("bin", cc.RelativeInstallPath()) |
| if cc.Target().NativeBridge == android.NativeBridgeEnabled { |
| dirInApex = filepath.Join(dirInApex, cc.Target().NativeBridgeRelativePath) |
| } |
| fileToCopy := cc.OutputFile().Path() |
| af := newApexFile(ctx, fileToCopy, cc.Name(), dirInApex, nativeExecutable, cc) |
| af.symlinks = cc.Symlinks() |
| return af |
| } |
| |
| func apexFileForPyBinary(ctx android.BaseModuleContext, py *python.Module) apexFile { |
| dirInApex := "bin" |
| fileToCopy := py.HostToolPath().Path() |
| return newApexFile(ctx, fileToCopy, py.Name(), dirInApex, pyBinary, py) |
| } |
| func apexFileForGoBinary(ctx android.BaseModuleContext, depName string, gb bootstrap.GoBinaryTool) apexFile { |
| dirInApex := "bin" |
| s, err := filepath.Rel(android.PathForOutput(ctx).String(), gb.InstallPath()) |
| if err != nil { |
| ctx.ModuleErrorf("Unable to use compiled binary at %s", gb.InstallPath()) |
| return apexFile{} |
| } |
| fileToCopy := android.PathForOutput(ctx, s) |
| // NB: Since go binaries are static we don't need the module for anything here, which is |
| // good since the go tool is a blueprint.Module not an android.Module like we would |
| // normally use. |
| return newApexFile(ctx, fileToCopy, depName, dirInApex, goBinary, nil) |
| } |
| |
| func apexFileForShBinary(ctx android.BaseModuleContext, sh *android.ShBinary) apexFile { |
| dirInApex := filepath.Join("bin", sh.SubDir()) |
| fileToCopy := sh.OutputFile() |
| af := newApexFile(ctx, fileToCopy, sh.Name(), dirInApex, shBinary, sh) |
| af.symlinks = sh.Symlinks() |
| return af |
| } |
| |
| // TODO(b/146586360): replace javaLibrary(in apex/apex.go) with java.Dependency |
| type javaLibrary interface { |
| android.Module |
| java.Dependency |
| } |
| |
| func apexFileForJavaLibrary(ctx android.BaseModuleContext, lib javaLibrary) apexFile { |
| dirInApex := "javalib" |
| fileToCopy := lib.DexJar() |
| af := newApexFile(ctx, fileToCopy, lib.Name(), dirInApex, javaSharedLib, lib) |
| af.jacocoReportClassesFile = lib.JacocoReportClassesFile() |
| return af |
| } |
| |
| func apexFileForPrebuiltEtc(ctx android.BaseModuleContext, prebuilt android.PrebuiltEtcModule, depName string) apexFile { |
| dirInApex := filepath.Join("etc", prebuilt.SubDir()) |
| fileToCopy := prebuilt.OutputFile() |
| return newApexFile(ctx, fileToCopy, depName, dirInApex, etc, prebuilt) |
| } |
| |
| func apexFileForCompatConfig(ctx android.BaseModuleContext, config java.PlatformCompatConfigIntf, depName string) apexFile { |
| dirInApex := filepath.Join("etc", config.SubDir()) |
| fileToCopy := config.CompatConfig() |
| return newApexFile(ctx, fileToCopy, depName, dirInApex, etc, config) |
| } |
| |
| func apexFileForAndroidApp(ctx android.BaseModuleContext, aapp interface { |
| android.Module |
| Privileged() bool |
| OutputFile() android.Path |
| JacocoReportClassesFile() android.Path |
| Certificate() java.Certificate |
| }, pkgName string) apexFile { |
| appDir := "app" |
| if aapp.Privileged() { |
| appDir = "priv-app" |
| } |
| dirInApex := filepath.Join(appDir, pkgName) |
| fileToCopy := aapp.OutputFile() |
| af := newApexFile(ctx, fileToCopy, aapp.Name(), dirInApex, app, aapp) |
| af.jacocoReportClassesFile = aapp.JacocoReportClassesFile() |
| af.certificate = aapp.Certificate() |
| |
| if app, ok := aapp.(interface { |
| OverriddenManifestPackageName() string |
| }); ok { |
| af.overriddenPackageName = app.OverriddenManifestPackageName() |
| } |
| return af |
| } |
| |
| // Context "decorator", overriding the InstallBypassMake method to always reply `true`. |
| type flattenedApexContext struct { |
| android.ModuleContext |
| } |
| |
| func (c *flattenedApexContext) InstallBypassMake() bool { |
| return true |
| } |
| |
| // Visit dependencies that contributes to the payload of this APEX |
| func (a *apexBundle) walkPayloadDeps(ctx android.ModuleContext, |
| do func(ctx android.ModuleContext, from blueprint.Module, to android.ApexModule, externalDep bool)) { |
| ctx.WalkDepsBlueprint(func(child, parent blueprint.Module) bool { |
| am, ok := child.(android.ApexModule) |
| if !ok || !am.CanHaveApexVariants() { |
| return false |
| } |
| |
| // Check for the direct dependencies that contribute to the payload |
| if dt, ok := ctx.OtherModuleDependencyTag(child).(dependencyTag); ok { |
| if dt.payload { |
| do(ctx, parent, am, false /* externalDep */) |
| return true |
| } |
| return false |
| } |
| |
| // Check for the indirect dependencies if it is considered as part of the APEX |
| if am.ApexName() != "" { |
| do(ctx, parent, am, false /* externalDep */) |
| return true |
| } |
| |
| do(ctx, parent, am, true /* externalDep */) |
| |
| // As soon as the dependency graph crosses the APEX boundary, don't go further. |
| return false |
| }) |
| } |
| |
| func (a *apexBundle) minSdkVersion(ctx android.BaseModuleContext) int { |
| ver := proptools.StringDefault(a.properties.Min_sdk_version, "current") |
| intVer, err := android.ApiStrToNum(ctx, ver) |
| if err != nil { |
| ctx.PropertyErrorf("min_sdk_version", "%s", err.Error()) |
| } |
| return intVer |
| } |
| |
| // Ensures that the dependencies are marked as available for this APEX |
| func (a *apexBundle) checkApexAvailability(ctx android.ModuleContext) { |
| // Let's be practical. Availability for test, host, and the VNDK apex isn't important |
| if ctx.Host() || a.testApex || a.vndkApex { |
| return |
| } |
| |
| // Coverage build adds additional dependencies for the coverage-only runtime libraries. |
| // Requiring them and their transitive depencies with apex_available is not right |
| // because they just add noise. |
| if ctx.Config().IsEnvTrue("EMMA_INSTRUMENT") || a.IsNativeCoverageNeeded(ctx) { |
| return |
| } |
| |
| a.walkPayloadDeps(ctx, func(ctx android.ModuleContext, from blueprint.Module, to android.ApexModule, externalDep bool) { |
| apexName := ctx.ModuleName() |
| fromName := ctx.OtherModuleName(from) |
| toName := ctx.OtherModuleName(to) |
| if externalDep || to.AvailableFor(apexName) || whitelistedApexAvailable(apexName, toName) { |
| return |
| } |
| ctx.ModuleErrorf("%q requires %q that is not available for the APEX.", fromName, toName) |
| }) |
| } |
| |
| // Collects the list of module names that directly or indirectly contributes to the payload of this APEX |
| func (a *apexBundle) collectDepsInfo(ctx android.ModuleContext) { |
| a.depInfos = make(map[string]depInfo) |
| a.walkPayloadDeps(ctx, func(ctx android.ModuleContext, from blueprint.Module, to android.ApexModule, externalDep bool) { |
| if from.Name() == to.Name() { |
| // This can happen for cc.reuseObjTag. We are not interested in tracking this. |
| return |
| } |
| |
| if info, exists := a.depInfos[to.Name()]; exists { |
| if !android.InList(from.Name(), info.from) { |
| info.from = append(info.from, from.Name()) |
| } |
| info.isExternal = info.isExternal && externalDep |
| a.depInfos[to.Name()] = info |
| } else { |
| a.depInfos[to.Name()] = depInfo{ |
| to: to.Name(), |
| from: []string{from.Name()}, |
| isExternal: externalDep, |
| } |
| } |
| }) |
| } |
| |
| func (a *apexBundle) GenerateAndroidBuildActions(ctx android.ModuleContext) { |
| buildFlattenedAsDefault := ctx.Config().FlattenApex() && !ctx.Config().UnbundledBuild() |
| switch a.properties.ApexType { |
| case imageApex: |
| if buildFlattenedAsDefault { |
| a.suffix = imageApexSuffix |
| } else { |
| a.suffix = "" |
| a.primaryApexType = true |
| |
| if ctx.Config().InstallExtraFlattenedApexes() { |
| a.requiredDeps = append(a.requiredDeps, a.Name()+flattenedSuffix) |
| } |
| } |
| case zipApex: |
| if proptools.String(a.properties.Payload_type) == "zip" { |
| a.suffix = "" |
| a.primaryApexType = true |
| } else { |
| a.suffix = zipApexSuffix |
| } |
| case flattenedApex: |
| if buildFlattenedAsDefault { |
| a.suffix = "" |
| a.primaryApexType = true |
| } else { |
| a.suffix = flattenedSuffix |
| } |
| } |
| |
| if len(a.properties.Tests) > 0 && !a.testApex { |
| ctx.PropertyErrorf("tests", "property not allowed in apex module type") |
| return |
| } |
| |
| a.checkApexAvailability(ctx) |
| |
| a.collectDepsInfo(ctx) |
| |
| handleSpecialLibs := !android.Bool(a.properties.Ignore_system_library_special_case) |
| |
| // native lib dependencies |
| var provideNativeLibs []string |
| var requireNativeLibs []string |
| |
| // Check if "uses" requirements are met with dependent apexBundles |
| var providedNativeSharedLibs []string |
| useVendor := proptools.Bool(a.properties.Use_vendor) |
| ctx.VisitDirectDepsBlueprint(func(m blueprint.Module) { |
| if ctx.OtherModuleDependencyTag(m) != usesTag { |
| return |
| } |
| otherName := ctx.OtherModuleName(m) |
| other, ok := m.(*apexBundle) |
| if !ok { |
| ctx.PropertyErrorf("uses", "%q is not a provider", otherName) |
| return |
| } |
| if proptools.Bool(other.properties.Use_vendor) != useVendor { |
| ctx.PropertyErrorf("use_vendor", "%q has different value of use_vendor", otherName) |
| return |
| } |
| if !proptools.Bool(other.properties.Provide_cpp_shared_libs) { |
| ctx.PropertyErrorf("uses", "%q does not provide native_shared_libs", otherName) |
| return |
| } |
| providedNativeSharedLibs = append(providedNativeSharedLibs, other.properties.Native_shared_libs...) |
| }) |
| |
| var filesInfo []apexFile |
| // TODO(jiyong) do this using walkPayloadDeps |
| ctx.WalkDepsBlueprint(func(child, parent blueprint.Module) bool { |
| depTag := ctx.OtherModuleDependencyTag(child) |
| depName := ctx.OtherModuleName(child) |
| if _, isDirectDep := parent.(*apexBundle); isDirectDep { |
| switch depTag { |
| case sharedLibTag: |
| if c, ok := child.(*cc.Module); ok { |
| // bootstrap bionic libs are treated as provided by system |
| if c.HasStubsVariants() && !cc.InstallToBootstrap(c.BaseModuleName(), ctx.Config()) { |
| provideNativeLibs = append(provideNativeLibs, c.OutputFile().Path().Base()) |
| } |
| filesInfo = append(filesInfo, apexFileForNativeLibrary(ctx, c, handleSpecialLibs)) |
| return true // track transitive dependencies |
| } else { |
| ctx.PropertyErrorf("native_shared_libs", "%q is not a cc_library or cc_library_shared module", depName) |
| } |
| case executableTag: |
| if cc, ok := child.(*cc.Module); ok { |
| filesInfo = append(filesInfo, apexFileForExecutable(ctx, cc)) |
| return true // track transitive dependencies |
| } else if sh, ok := child.(*android.ShBinary); ok { |
| filesInfo = append(filesInfo, apexFileForShBinary(ctx, sh)) |
| } else if py, ok := child.(*python.Module); ok && py.HostToolPath().Valid() { |
| filesInfo = append(filesInfo, apexFileForPyBinary(ctx, py)) |
| } else if gb, ok := child.(bootstrap.GoBinaryTool); ok && a.Host() { |
| filesInfo = append(filesInfo, apexFileForGoBinary(ctx, depName, gb)) |
| } else { |
| ctx.PropertyErrorf("binaries", "%q is neither cc_binary, (embedded) py_binary, (host) blueprint_go_binary, (host) bootstrap_go_binary, nor sh_binary", depName) |
| } |
| case javaLibTag: |
| if javaLib, ok := child.(*java.Library); ok { |
| af := apexFileForJavaLibrary(ctx, javaLib) |
| if !af.Ok() { |
| ctx.PropertyErrorf("java_libs", "%q is not configured to be compiled into dex", depName) |
| } else { |
| filesInfo = append(filesInfo, af) |
| return true // track transitive dependencies |
| } |
| } else if sdkLib, ok := child.(*java.SdkLibrary); ok { |
| af := apexFileForJavaLibrary(ctx, sdkLib) |
| if !af.Ok() { |
| ctx.PropertyErrorf("java_libs", "%q is not configured to be compiled into dex", depName) |
| return false |
| } |
| filesInfo = append(filesInfo, af) |
| return true // track transitive dependencies |
| } else { |
| ctx.PropertyErrorf("java_libs", "%q of type %q is not supported", depName, ctx.OtherModuleType(child)) |
| } |
| case androidAppTag: |
| pkgName := ctx.DeviceConfig().OverridePackageNameFor(depName) |
| if ap, ok := child.(*java.AndroidApp); ok { |
| filesInfo = append(filesInfo, apexFileForAndroidApp(ctx, ap, pkgName)) |
| return true // track transitive dependencies |
| } else if ap, ok := child.(*java.AndroidAppImport); ok { |
| filesInfo = append(filesInfo, apexFileForAndroidApp(ctx, ap, pkgName)) |
| } else if ap, ok := child.(*java.AndroidTestHelperApp); ok { |
| filesInfo = append(filesInfo, apexFileForAndroidApp(ctx, ap, pkgName)) |
| } else { |
| ctx.PropertyErrorf("apps", "%q is not an android_app module", depName) |
| } |
| case prebuiltTag: |
| if prebuilt, ok := child.(android.PrebuiltEtcModule); ok { |
| filesInfo = append(filesInfo, apexFileForPrebuiltEtc(ctx, prebuilt, depName)) |
| } else if prebuilt, ok := child.(java.PlatformCompatConfigIntf); ok { |
| filesInfo = append(filesInfo, apexFileForCompatConfig(ctx, prebuilt, depName)) |
| } else { |
| ctx.PropertyErrorf("prebuilts", "%q is not a prebuilt_etc and not a platform_compat_config module", depName) |
| } |
| case testTag: |
| if ccTest, ok := child.(*cc.Module); ok { |
| if ccTest.IsTestPerSrcAllTestsVariation() { |
| // Multiple-output test module (where `test_per_src: true`). |
| // |
| // `ccTest` is the "" ("all tests") variation of a `test_per_src` module. |
| // We do not add this variation to `filesInfo`, as it has no output; |
| // however, we do add the other variations of this module as indirect |
| // dependencies (see below). |
| return true |
| } else { |
| // Single-output test module (where `test_per_src: false`). |
| af := apexFileForExecutable(ctx, ccTest) |
| af.class = nativeTest |
| filesInfo = append(filesInfo, af) |
| } |
| } else { |
| ctx.PropertyErrorf("tests", "%q is not a cc module", depName) |
| } |
| case keyTag: |
| if key, ok := child.(*apexKey); ok { |
| a.private_key_file = key.private_key_file |
| a.public_key_file = key.public_key_file |
| } else { |
| ctx.PropertyErrorf("key", "%q is not an apex_key module", depName) |
| } |
| return false |
| case certificateTag: |
| if dep, ok := child.(*java.AndroidAppCertificate); ok { |
| a.container_certificate_file = dep.Certificate.Pem |
| a.container_private_key_file = dep.Certificate.Key |
| } else { |
| ctx.ModuleErrorf("certificate dependency %q must be an android_app_certificate module", depName) |
| } |
| case android.PrebuiltDepTag: |
| // If the prebuilt is force disabled, remember to delete the prebuilt file |
| // that might have been installed in the previous builds |
| if prebuilt, ok := child.(*Prebuilt); ok && prebuilt.isForceDisabled() { |
| a.prebuiltFileToDelete = prebuilt.InstallFilename() |
| } |
| } |
| } else if !a.vndkApex { |
| // indirect dependencies |
| if am, ok := child.(android.ApexModule); ok { |
| // We cannot use a switch statement on `depTag` here as the checked |
| // tags used below are private (e.g. `cc.sharedDepTag`). |
| if cc.IsSharedDepTag(depTag) || cc.IsRuntimeDepTag(depTag) { |
| if cc, ok := child.(*cc.Module); ok { |
| if android.InList(cc.Name(), providedNativeSharedLibs) { |
| // If we're using a shared library which is provided from other APEX, |
| // don't include it in this APEX |
| return false |
| } |
| if !a.Host() && !android.DirectlyInApex(ctx.ModuleName(), ctx.OtherModuleName(cc)) && (cc.IsStubs() || cc.HasStubsVariants()) { |
| // If the dependency is a stubs lib, don't include it in this APEX, |
| // but make sure that the lib is installed on the device. |
| // In case no APEX is having the lib, the lib is installed to the system |
| // partition. |
| // |
| // Always include if we are a host-apex however since those won't have any |
| // system libraries. |
| if !android.DirectlyInAnyApex(ctx, cc.Name()) && !android.InList(cc.Name(), a.requiredDeps) { |
| a.requiredDeps = append(a.requiredDeps, cc.Name()) |
| } |
| requireNativeLibs = append(requireNativeLibs, cc.OutputFile().Path().Base()) |
| // Don't track further |
| return false |
| } |
| af := apexFileForNativeLibrary(ctx, cc, handleSpecialLibs) |
| af.transitiveDep = true |
| filesInfo = append(filesInfo, af) |
| return true // track transitive dependencies |
| } |
| } else if cc.IsTestPerSrcDepTag(depTag) { |
| if cc, ok := child.(*cc.Module); ok { |
| af := apexFileForExecutable(ctx, cc) |
| // Handle modules created as `test_per_src` variations of a single test module: |
| // use the name of the generated test binary (`fileToCopy`) instead of the name |
| // of the original test module (`depName`, shared by all `test_per_src` |
| // variations of that module). |
| af.moduleName = filepath.Base(af.builtFile.String()) |
| // these are not considered transitive dep |
| af.transitiveDep = false |
| filesInfo = append(filesInfo, af) |
| return true // track transitive dependencies |
| } |
| } else if java.IsJniDepTag(depTag) { |
| // Because APK-in-APEX embeds jni_libs transitively, we don't need to track transitive deps |
| return false |
| } else if java.IsXmlPermissionsFileDepTag(depTag) { |
| if prebuilt, ok := child.(android.PrebuiltEtcModule); ok { |
| filesInfo = append(filesInfo, apexFileForPrebuiltEtc(ctx, prebuilt, depName)) |
| } |
| } else if am.CanHaveApexVariants() && am.IsInstallableToApex() { |
| ctx.ModuleErrorf("unexpected tag %q for indirect dependency %q", depTag, depName) |
| } |
| } |
| } |
| return false |
| }) |
| |
| // Specific to the ART apex: dexpreopt artifacts for libcore Java libraries. |
| // Build rules are generated by the dexpreopt singleton, and here we access build artifacts |
| // via the global boot image config. |
| if a.artApex { |
| for arch, files := range java.DexpreoptedArtApexJars(ctx) { |
| dirInApex := filepath.Join("javalib", arch.String()) |
| for _, f := range files { |
| localModule := "javalib_" + arch.String() + "_" + filepath.Base(f.String()) |
| af := newApexFile(ctx, f, localModule, dirInApex, etc, nil) |
| filesInfo = append(filesInfo, af) |
| } |
| } |
| } |
| |
| if a.private_key_file == nil { |
| ctx.PropertyErrorf("key", "private_key for %q could not be found", String(a.properties.Key)) |
| return |
| } |
| |
| // remove duplicates in filesInfo |
| removeDup := func(filesInfo []apexFile) []apexFile { |
| encountered := make(map[string]apexFile) |
| for _, f := range filesInfo { |
| dest := filepath.Join(f.installDir, f.builtFile.Base()) |
| if e, ok := encountered[dest]; !ok { |
| encountered[dest] = f |
| } else { |
| // If a module is directly included and also transitively depended on |
| // consider it as directly included. |
| e.transitiveDep = e.transitiveDep && f.transitiveDep |
| encountered[dest] = e |
| } |
| } |
| var result []apexFile |
| for _, v := range encountered { |
| result = append(result, v) |
| } |
| return result |
| } |
| filesInfo = removeDup(filesInfo) |
| |
| // to have consistent build rules |
| sort.Slice(filesInfo, func(i, j int) bool { |
| return filesInfo[i].builtFile.String() < filesInfo[j].builtFile.String() |
| }) |
| |
| a.installDir = android.PathForModuleInstall(ctx, "apex") |
| a.filesInfo = filesInfo |
| |
| if a.properties.ApexType != zipApex { |
| if a.properties.File_contexts == nil { |
| a.fileContexts = android.PathForSource(ctx, "system/sepolicy/apex", ctx.ModuleName()+"-file_contexts") |
| } else { |
| a.fileContexts = android.PathForModuleSrc(ctx, *a.properties.File_contexts) |
| if a.Platform() { |
| if matched, err := path.Match("system/sepolicy/**/*", a.fileContexts.String()); err != nil || !matched { |
| ctx.PropertyErrorf("file_contexts", "should be under system/sepolicy, but %q", a.fileContexts) |
| } |
| } |
| } |
| if !android.ExistentPathForSource(ctx, a.fileContexts.String()).Valid() { |
| ctx.PropertyErrorf("file_contexts", "cannot find file_contexts file: %q", a.fileContexts) |
| return |
| } |
| } |
| // Optimization. If we are building bundled APEX, for the files that are gathered due to the |
| // transitive dependencies, don't place them inside the APEX, but place a symlink pointing |
| // the same library in the system partition, thus effectively sharing the same libraries |
| // across the APEX boundary. For unbundled APEX, all the gathered files are actually placed |
| // in the APEX. |
| a.linkToSystemLib = !ctx.Config().UnbundledBuild() && |
| a.installable() && |
| !proptools.Bool(a.properties.Use_vendor) |
| |
| // We don't need the optimization for updatable APEXes, as it might give false signal |
| // to the system health when the APEXes are still bundled (b/149805758) |
| if proptools.Bool(a.properties.Updatable) && a.properties.ApexType == imageApex { |
| a.linkToSystemLib = false |
| } |
| |
| // We also don't want the optimization for host APEXes, because it doesn't make sense. |
| if ctx.Host() { |
| a.linkToSystemLib = false |
| } |
| |
| // prepare apex_manifest.json |
| a.buildManifest(ctx, provideNativeLibs, requireNativeLibs) |
| |
| a.setCertificateAndPrivateKey(ctx) |
| if a.properties.ApexType == flattenedApex { |
| a.buildFlattenedApex(ctx) |
| } else { |
| a.buildUnflattenedApex(ctx) |
| } |
| |
| a.compatSymlinks = makeCompatSymlinks(a.BaseModuleName(), ctx) |
| |
| a.buildApexDependencyInfo(ctx) |
| } |
| |
| func whitelistedApexAvailable(apex, moduleName string) bool { |
| key := apex |
| // Prebuilt modules (e.g. java_import, etc.) have "prebuilt_" prefix added by the build |
| // system. Trim the prefix for the check since they are confusing |
| moduleName = strings.TrimPrefix(moduleName, "prebuilt_") |
| if strings.HasPrefix(moduleName, "libclang_rt.") { |
| // This module has many arch variants that depend on the product being built. |
| // We don't want to list them all |
| moduleName = "libclang_rt" |
| } |
| |
| if val, ok := apexAvailWl[key]; ok && android.InList(moduleName, val) { |
| return true |
| } |
| |
| key = "//any" |
| if val, ok := apexAvailWl[key]; ok && android.InList(moduleName, val) { |
| return true |
| } |
| |
| return false |
| } |
| |
| func newApexBundle() *apexBundle { |
| module := &apexBundle{} |
| module.AddProperties(&module.properties) |
| module.AddProperties(&module.targetProperties) |
| module.AddProperties(&module.overridableProperties) |
| module.Prefer32(func(ctx android.BaseModuleContext, base *android.ModuleBase, class android.OsClass) bool { |
| return class == android.Device && ctx.Config().DevicePrefer32BitExecutables() |
| }) |
| android.InitAndroidMultiTargetsArchModule(module, android.HostAndDeviceSupported, android.MultilibCommon) |
| android.InitDefaultableModule(module) |
| android.InitSdkAwareModule(module) |
| android.InitOverridableModule(module, &module.overridableProperties.Overrides) |
| return module |
| } |
| |
| func ApexBundleFactory(testApex bool, artApex bool) android.Module { |
| bundle := newApexBundle() |
| bundle.testApex = testApex |
| bundle.artApex = artApex |
| return bundle |
| } |
| |
| // apex_test is an APEX for testing. The difference from the ordinary apex module type is that |
| // certain compatibility checks such as apex_available are not done for apex_test. |
| func testApexBundleFactory() android.Module { |
| bundle := newApexBundle() |
| bundle.testApex = true |
| return bundle |
| } |
| |
| // apex packages other modules into an APEX file which is a packaging format for system-level |
| // components like binaries, shared libraries, etc. |
| func BundleFactory() android.Module { |
| return newApexBundle() |
| } |
| |
| // |
| // Defaults |
| // |
| type Defaults struct { |
| android.ModuleBase |
| android.DefaultsModuleBase |
| } |
| |
| func defaultsFactory() android.Module { |
| return DefaultsFactory() |
| } |
| |
| func DefaultsFactory(props ...interface{}) android.Module { |
| module := &Defaults{} |
| |
| module.AddProperties(props...) |
| module.AddProperties( |
| &apexBundleProperties{}, |
| &apexTargetBundleProperties{}, |
| &overridableProperties{}, |
| ) |
| |
| android.InitDefaultsModule(module) |
| return module |
| } |
| |
| // |
| // OverrideApex |
| // |
| type OverrideApex struct { |
| android.ModuleBase |
| android.OverrideModuleBase |
| } |
| |
| func (o *OverrideApex) GenerateAndroidBuildActions(ctx android.ModuleContext) { |
| // All the overrides happen in the base module. |
| } |
| |
| // override_apex is used to create an apex module based on another apex module |
| // by overriding some of its properties. |
| func overrideApexFactory() android.Module { |
| m := &OverrideApex{} |
| m.AddProperties(&overridableProperties{}) |
| |
| android.InitAndroidMultiTargetsArchModule(m, android.DeviceSupported, android.MultilibCommon) |
| android.InitOverrideModule(m) |
| return m |
| } |
