blob: a753554ca505270c944c3a814f60636d32016d55 [file] [log] [blame]
# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
INTERNAL_CLEAN_STEPS :=
# Builds up a list of clean steps. Creates a unique
# id for each step by taking INTERNAL_CLEAN_BUILD_VERSION
# and appending an increasing number of '@' characters.
#
# $(1): shell command to run
define _add-clean-step
$(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \
$(error INTERNAL_CLEAN_BUILD_VERSION not set))
$(eval _acs_id := $(strip $(lastword $(INTERNAL_CLEAN_STEPS))))
$(if $(_acs_id),,$(eval _acs_id := $(INTERNAL_CLEAN_BUILD_VERSION)))
$(eval _acs_id := $(_acs_id)@)
$(eval INTERNAL_CLEAN_STEPS += $(_acs_id))
$(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1))
$(eval _acs_id :=)
endef
define add-clean-step
$(if $(call _add-clean-step,$(1)),)
endef
# Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps.
# cleanspec.mk is outside of the core directory so that more people
# can have permission to touch it.
include build/cleanspec.mk
INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))
# If the clean_steps.mk file is missing (usually after a clean build)
# then we won't do anything.
CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)
CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)
# Read the current state from the file, if present.
# Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS.
#
clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk
-include $(clean_steps_file)
ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION))
# The major clean version is out-of-date. Do a full clean, and
# don't even bother with the clean steps.
$(info *** A clean build is required because of a recent change.)
$(shell rm -rf $(OUT_DIR))
$(info *** Done with the cleaning, now starting the real build.)
else
# The major clean version is correct. Find the list of clean steps
# that we need to execute to get up-to-date.
steps := \
$(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS))
$(foreach step,$(steps), \
$(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \
$(shell $(INTERNAL_CLEAN_STEP.$(step))) \
)
steps :=
endif
CURRENT_CLEAN_BUILD_VERSION :=
CURRENT_CLEAN_STEPS :=
# Write the new state to the file.
#
$(shell \
mkdir -p $(dir $(clean_steps_file)) && \
echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
$(clean_steps_file) ;\
echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \
$(clean_steps_file) \
)
clean_steps_file :=
INTERNAL_CLEAN_STEPS :=
INTERNAL_CLEAN_BUILD_VERSION :=
# Since products and build variants (unfortunately) share the same
# PRODUCT_OUT staging directory, things can get out of sync if different
# build configurations are built in the same tree. The following logic
# will notice when the configuration has changed and remove the files
# necessary to keep things consistent.
previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk
# TODO: this special case for the sdk is only necessary while "sdk"
# is a valid make target. Eventually, it will just be a product, at
# which point TARGET_PRODUCT will handle it and we can avoid this check
# of MAKECMDGOALS. The "addprefix" is just to keep things pretty.
ifneq ($(TARGET_PRODUCT),sdk)
building_sdk := $(addprefix -,$(filter sdk,$(MAKECMDGOALS)))
else
# Don't bother with this extra part when explicitly building the sdk product.
building_sdk :=
endif
# A change in the list of locales warrants an installclean, too.
locale_list := $(subst $(space),$(comma),$(strip $(PRODUCT_LOCALES)))
current_build_config := \
$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)$(building_sdk)-{$(locale_list)}
building_sdk :=
locale_list :=
force_installclean := false
# Read the current state from the file, if present.
# Will set PREVIOUS_BUILD_CONFIG.
#
PREVIOUS_BUILD_CONFIG :=
-include $(previous_build_config_file)
PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
ifdef PREVIOUS_BUILD_CONFIG
ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
$(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
ifneq ($(DISABLE_AUTO_INSTALLCLEAN),true)
force_installclean := true
else
$(info DISABLE_AUTO_INSTALLCLEAN is set; skipping auto-clean. Your tree may be in an inconsistent state.)
endif
endif
endif # else, this is the first build, so no need to clean.
PREVIOUS_BUILD_CONFIG :=
# Write the new state to the file.
#
$(shell \
mkdir -p $(dir $(previous_build_config_file)) && \
echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
$(previous_build_config_file) \
)
previous_build_config_file :=
current_build_config :=
#
# installclean logic
#
# The files/dirs to delete during an installclean. This includes the
# non-common APPS directory, which may contain the wrong resources.
# Use "./" in front of the paths to avoid accidentally deleting random
# parts of the filesystem if any of the *_OUT vars resolve to blank.
#
# Deletes all of the files that change between different build types,
# like "make user" vs. "make sdk". This lets you work with different
# build types without having to do a full clean each time. E.g.:
#
# $ make -j8 all
# $ make installclean
# $ make -j8 user
# $ make installclean
# $ make -j8 sdk
#
installclean_files := \
./$(HOST_OUT)/obj/NOTICE_FILES \
./$(HOST_OUT)/sdk \
./$(PRODUCT_OUT)/*.img \
./$(PRODUCT_OUT)/*.txt \
./$(PRODUCT_OUT)/*.xlb \
./$(PRODUCT_OUT)/*.zip \
./$(PRODUCT_OUT)/data \
./$(PRODUCT_OUT)/obj/lib \
./$(PRODUCT_OUT)/obj/APPS \
./$(PRODUCT_OUT)/obj/NOTICE_FILES \
./$(PRODUCT_OUT)/obj/PACKAGING \
./$(PRODUCT_OUT)/recovery \
./$(PRODUCT_OUT)/root \
./$(PRODUCT_OUT)/symbols/system/lib \
./$(PRODUCT_OUT)/system
# The files/dirs to delete during a dataclean, which removes any files
# in the staging and emulator data partitions.
dataclean_files := \
./$(PRODUCT_OUT)/data/* \
./$(PRODUCT_OUT)/data-qemu/* \
./$(PRODUCT_OUT)/userdata-qemu.img
# Define the rules for commandline invocation.
.PHONY: dataclean
dataclean: FILES := $(dataclean_files)
dataclean:
$(hide) rm -rf $(FILES)
@echo "Deleted emulator userdata images."
.PHONY: installclean
installclean: FILES := $(installclean_files)
installclean: dataclean
$(hide) rm -rf $(FILES)
@echo "Deleted images and staging directories."
ifeq "$(force_installclean)" "true"
$(info *** Forcing "make installclean"...)
$(shell rm -rf $(dataclean_files) $(installclean_files))
$(info *** Done with the cleaning, now starting the real build.)
endif
force_installclean :=