blob: b34e27425e7e5d26e60509c51b393f7f76f002f1 [file] [log] [blame]
#
# Copyright (C) 2008 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
##
## Common build system definitions. Mostly standard
## commands for building various types of targets, which
## are used by others to construct the final targets.
##
# These are variables we use to collect overall lists
# of things being processed.
# Full paths to all of the documentation
ALL_DOCS:=
# The short names of all of the targets in the system.
# For each element of ALL_MODULES, two other variables
# are defined:
# $(ALL_MODULES.$(target)).BUILT
# $(ALL_MODULES.$(target)).INSTALLED
# The BUILT variable contains LOCAL_BUILT_MODULE for that
# target, and the INSTALLED variable contains the LOCAL_INSTALLED_MODULE.
# Some targets may have multiple files listed in the BUILT and INSTALLED
# sub-variables.
ALL_MODULES:=
# Full paths to targets that should be added to the "make droid"
# set of installed targets.
ALL_DEFAULT_INSTALLED_MODULES:=
# The list of tags that have been defined by
# LOCAL_MODULE_TAGS. Each word in this variable maps
# to a corresponding ALL_MODULE_TAGS.<tagname> variable
# that contains all of the INSTALLED_MODULEs with that tag.
ALL_MODULE_TAGS:=
# Similar to ALL_MODULE_TAGS, but contains the short names
# of all targets for a particular tag. The top-level variable
# won't have the list of tags; ust ALL_MODULE_TAGS to get
# the list of all known tags. (This means that this variable
# will always be empty; it's just here as a placeholder for
# its sub-variables.)
ALL_MODULE_NAME_TAGS:=
# Full paths to all prebuilt files that will be copied
# (used to make the dependency on acp)
ALL_PREBUILT:=
# Full path to all files that are made by some tool
ALL_GENERATED_SOURCES:=
# Full path to all asm, C, C++, lex and yacc generated C files.
# These all have an order-only dependency on the copied headers
ALL_C_CPP_ETC_OBJECTS:=
# The list of dynamic binaries that haven't been stripped/compressed/etc.
ALL_ORIGINAL_DYNAMIC_BINARIES:=
# These files go into the SDK
ALL_SDK_FILES:=
# Files for dalvik. This is often build without building the rest of the OS.
INTERNAL_DALVIK_MODULES:=
# All findbugs xml files
ALL_FINDBUGS_FILES:=
# GPL module license files
ALL_GPL_MODULE_LICENSE_FILES:=
# Target and host installed module's dependencies on shared libraries.
# They are list of "<module_name>:<installed_file>:lib1,lib2...".
TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES :=
2ND_TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES :=
HOST_DEPENDENCIES_ON_SHARED_LIBRARIES :=
# Generated class file names for Android resource.
# They are escaped and quoted so can be passed safely to a bash command.
ANDROID_RESOURCE_GENERATED_CLASSES := 'R.class' 'R$$*.class' 'Manifest.class' 'Manifest$$*.class'
###########################################################
## Debugging; prints a variable list to stdout
###########################################################
# $(1): variable name list, not variable values
define print-vars
$(foreach var,$(1), \
$(info $(var):) \
$(foreach word,$($(var)), \
$(info $(space)$(space)$(word)) \
) \
)
endef
###########################################################
## Evaluates to true if the string contains the word true,
## and empty otherwise
## $(1): a var to test
###########################################################
define true-or-empty
$(filter true, $(1))
endef
###########################################################
## Retrieve the directory of the current makefile
###########################################################
# Figure out where we are.
define my-dir
$(strip \
$(eval LOCAL_MODULE_MAKEFILE := $$(lastword $$(MAKEFILE_LIST))) \
$(if $(filter $(CLEAR_VARS),$(LOCAL_MODULE_MAKEFILE)), \
$(error LOCAL_PATH must be set before including $$(CLEAR_VARS)) \
, \
$(patsubst %/,%,$(dir $(LOCAL_MODULE_MAKEFILE))) \
) \
)
endef
###########################################################
## Retrieve a list of all makefiles immediately below some directory
###########################################################
define all-makefiles-under
$(wildcard $(1)/*/Android.mk)
endef
###########################################################
## Look under a directory for makefiles that don't have parent
## makefiles.
###########################################################
# $(1): directory to search under
# Ignores $(1)/Android.mk
define first-makefiles-under
$(shell build/tools/findleaves.py --prune=$(OUT_DIR) --prune=.repo --prune=.git \
--mindepth=2 $(1) Android.mk)
endef
###########################################################
## Retrieve a list of all makefiles immediately below your directory
###########################################################
define all-subdir-makefiles
$(call all-makefiles-under,$(call my-dir))
endef
###########################################################
## Look in the named list of directories for makefiles,
## relative to the current directory.
###########################################################
# $(1): List of directories to look for under this directory
define all-named-subdir-makefiles
$(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1))))
endef
###########################################################
## Find all of the java files under the named directories.
## Meant to be used like:
## SRC_FILES := $(call all-java-files-under,src tests)
###########################################################
define all-java-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) -name "*.java" -and -not -name ".*") \
)
endef
###########################################################
## Find all of the java files from here. Meant to be used like:
## SRC_FILES := $(call all-subdir-java-files)
###########################################################
define all-subdir-java-files
$(call all-java-files-under,.)
endef
###########################################################
## Find all of the c files under the named directories.
## Meant to be used like:
## SRC_FILES := $(call all-c-files-under,src tests)
###########################################################
define all-c-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) -name "*.c" -and -not -name ".*") \
)
endef
###########################################################
## Find all of the c files from here. Meant to be used like:
## SRC_FILES := $(call all-subdir-c-files)
###########################################################
define all-subdir-c-files
$(call all-c-files-under,.)
endef
###########################################################
## Find all files named "I*.aidl" under the named directories,
## which must be relative to $(LOCAL_PATH). The returned list
## is relative to $(LOCAL_PATH).
###########################################################
define all-Iaidl-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) -name "I*.aidl" -and -not -name ".*") \
)
endef
###########################################################
## Find all of the "I*.aidl" files under $(LOCAL_PATH).
###########################################################
define all-subdir-Iaidl-files
$(call all-Iaidl-files-under,.)
endef
###########################################################
## Find all of the logtags files under the named directories.
## Meant to be used like:
## SRC_FILES := $(call all-logtags-files-under,src)
###########################################################
define all-logtags-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) -name "*.logtags" -and -not -name ".*") \
)
endef
###########################################################
## Find all of the .proto files under the named directories.
## Meant to be used like:
## SRC_FILES := $(call all-proto-files-under,src)
###########################################################
define all-proto-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) -name "*.proto" -and -not -name ".*") \
)
endef
###########################################################
## Find all of the RenderScript files under the named directories.
## Meant to be used like:
## SRC_FILES := $(call all-renderscript-files-under,src)
###########################################################
define all-renderscript-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) \( -name "*.rs" -or -name "*.fs" \) -and -not -name ".*") \
)
endef
###########################################################
## Find all of the html files under the named directories.
## Meant to be used like:
## SRC_FILES := $(call all-html-files-under,src tests)
###########################################################
define all-html-files-under
$(patsubst ./%,%, \
$(shell cd $(LOCAL_PATH) ; \
find -L $(1) -name "*.html" -and -not -name ".*") \
)
endef
###########################################################
## Find all of the html files from here. Meant to be used like:
## SRC_FILES := $(call all-subdir-html-files)
###########################################################
define all-subdir-html-files
$(call all-html-files-under,.)
endef
###########################################################
## Find all of the files matching pattern
## SRC_FILES := $(call find-subdir-files, <pattern>)
###########################################################
define find-subdir-files
$(patsubst ./%,%,$(shell cd $(LOCAL_PATH) ; find -L $(1)))
endef
###########################################################
# find the files in the subdirectory $1 of LOCAL_DIR
# matching pattern $2, filtering out files $3
# e.g.
# SRC_FILES += $(call find-subdir-subdir-files, \
# css, *.cpp, DontWantThis.cpp)
###########################################################
define find-subdir-subdir-files
$(filter-out $(patsubst %,$(1)/%,$(3)),$(patsubst ./%,%,$(shell cd \
$(LOCAL_PATH) ; find -L $(1) -maxdepth 1 -name $(2))))
endef
###########################################################
## Find all of the files matching pattern
## SRC_FILES := $(call all-subdir-java-files)
###########################################################
define find-subdir-assets
$(if $(1),$(patsubst ./%,%, \
$(shell if [ -d $(1) ] ; then cd $(1) ; find ./ -not -name '.*' -and -type f -and -not -type l ; fi)), \
$(warning Empty argument supplied to find-subdir-assets) \
)
endef
###########################################################
## Find various file types in a list of directories relative to $(LOCAL_PATH)
###########################################################
define find-other-java-files
$(call find-subdir-files,$(1) -name "*.java" -and -not -name ".*")
endef
define find-other-html-files
$(call find-subdir-files,$(1) -name "*.html" -and -not -name ".*")
endef
###########################################################
# Use utility find to find given files in the given subdirs.
# This function uses $(1), instead of LOCAL_PATH as the base.
# $(1): the base dir, relative to the root of the source tree.
# $(2): the file name pattern to be passed to find as "-name".
# $(3): a list of subdirs of the base dir.
# Returns: a list of paths relative to the base dir.
###########################################################
define find-files-in-subdirs
$(patsubst ./%,%, \
$(shell cd $(1) ; \
find -L $(3) -name $(2) -and -not -name ".*") \
)
endef
###########################################################
## Scan through each directory of $(1) looking for files
## that match $(2) using $(wildcard). Useful for seeing if
## a given directory or one of its parents contains
## a particular file. Returns the first match found,
## starting furthest from the root.
###########################################################
define find-parent-file
$(strip \
$(eval _fpf := $(wildcard $(foreach f, $(2), $(strip $(1))/$(f)))) \
$(if $(_fpf),$(_fpf), \
$(if $(filter-out ./ .,$(1)), \
$(call find-parent-file,$(patsubst %/,%,$(dir $(1))),$(2)) \
) \
) \
)
endef
###########################################################
## Function we can evaluate to introduce a dynamic dependency
###########################################################
define add-dependency
$(1): $(2)
endef
###########################################################
## Set up the dependencies for a prebuilt target
## $(call add-prebuilt-file, srcfile, [targetclass])
###########################################################
define add-prebuilt-file
$(eval $(include-prebuilt))
endef
define include-prebuilt
include $$(CLEAR_VARS)
LOCAL_SRC_FILES := $(1)
LOCAL_BUILT_MODULE_STEM := $(1)
LOCAL_MODULE_SUFFIX := $$(suffix $(1))
LOCAL_MODULE := $$(basename $(1))
LOCAL_MODULE_CLASS := $(2)
include $$(BUILD_PREBUILT)
endef
###########################################################
## do multiple prebuilts
## $(call target class, files ...)
###########################################################
define add-prebuilt-files
$(foreach f,$(2),$(call add-prebuilt-file,$f,$(1)))
endef
###########################################################
## The intermediates directory. Where object files go for
## a given target. We could technically get away without
## the "_intermediates" suffix on the directory, but it's
## nice to be able to grep for that string to find out if
## anyone's abusing the system.
###########################################################
# $(1): target class, like "APPS"
# $(2): target name, like "NotePad"
# $(3): if non-empty, this is a HOST target.
# $(4): if non-empty, force the intermediates to be COMMON
# $(5): if non-empty, force the intermedistes to be for the 2nd arch
define intermediates-dir-for
$(strip \
$(eval _idfClass := $(strip $(1))) \
$(if $(_idfClass),, \
$(error $(LOCAL_PATH): Class not defined in call to intermediates-dir-for)) \
$(eval _idfName := $(strip $(2))) \
$(if $(_idfName),, \
$(error $(LOCAL_PATH): Name not defined in call to intermediates-dir-for)) \
$(eval _idfPrefix := $(if $(strip $(3)),HOST,TARGET)) \
$(eval _idf2ndArchPrefix := $(if $(strip $(5)),$(TARGET_2ND_ARCH_VAR_PREFIX))) \
$(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \
$(eval _idfIntBase := $($(_idfPrefix)_OUT_COMMON_INTERMEDIATES)) \
, \
$(eval _idfIntBase := $($(_idf2ndArchPrefix)$(_idfPrefix)_OUT_INTERMEDIATES)) \
) \
$(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \
)
endef
# Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE
# to determine the intermediates directory.
#
# $(1): if non-empty, force the intermediates to be COMMON
# $(2): if non-empty, force the intermediates to be for the 2nd arch
define local-intermediates-dir
$(strip \
$(if $(strip $(LOCAL_MODULE_CLASS)),, \
$(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-intermediates-dir)) \
$(if $(strip $(LOCAL_MODULE)),, \
$(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-intermediates-dir)) \
$(call intermediates-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1),$(2)) \
)
endef
###########################################################
## The generated sources directory. Placing generated
## source files directly in the intermediates directory
## causes problems for multiarch builds, where there are
## two intermediates directories for a single target. Put
## them in a separate directory, and they will be copied to
## each intermediates directory automatically.
###########################################################
# $(1): target class, like "APPS"
# $(2): target name, like "NotePad"
# $(3): if non-empty, this is a HOST target.
# $(4): if non-empty, force the generated sources to be COMMON
define generated-sources-dir-for
$(strip \
$(eval _idfClass := $(strip $(1))) \
$(if $(_idfClass),, \
$(error $(LOCAL_PATH): Class not defined in call to generated-sources-dir-for)) \
$(eval _idfName := $(strip $(2))) \
$(if $(_idfName),, \
$(error $(LOCAL_PATH): Name not defined in call to generated-sources-dir-for)) \
$(eval _idfPrefix := $(if $(strip $(3)),HOST,TARGET)) \
$(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \
$(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN_COMMON)) \
, \
$(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN)) \
) \
$(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \
)
endef
# Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE
# to determine the generated sources directory.
#
# $(1): if non-empty, force the intermediates to be COMMON
define local-generated-sources-dir
$(strip \
$(if $(strip $(LOCAL_MODULE_CLASS)),, \
$(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-generated-sources-dir)) \
$(if $(strip $(LOCAL_MODULE)),, \
$(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-generated-sources-dir)) \
$(call generated-sources-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1)) \
)
endef
###########################################################
## Convert "path/to/libXXX.so" to "-lXXX".
## Any "path/to/libXXX.a" elements pass through unchanged.
###########################################################
define normalize-libraries
$(foreach so,$(filter %.so,$(1)),-l$(patsubst lib%.so,%,$(notdir $(so))))\
$(filter-out %.so,$(1))
endef
# TODO: change users to call the common version.
define normalize-host-libraries
$(call normalize-libraries,$(1))
endef
define normalize-target-libraries
$(call normalize-libraries,$(1))
endef
###########################################################
## Convert a list of short module names (e.g., "framework", "Browser")
## into the list of files that are built for those modules.
## NOTE: this won't return reliable results until after all
## sub-makefiles have been included.
## $(1): target list
###########################################################
define module-built-files
$(foreach module,$(1),$(ALL_MODULES.$(module).BUILT))
endef
###########################################################
## Convert a list of short modules names (e.g., "framework", "Browser")
## into the list of files that are installed for those modules.
## NOTE: this won't return reliable results until after all
## sub-makefiles have been included.
## $(1): target list
###########################################################
define module-installed-files
$(foreach module,$(1),$(ALL_MODULES.$(module).INSTALLED))
endef
###########################################################
## Convert a list of short modules names (e.g., "framework", "Browser")
## into the list of files that should be used when linking
## against that module as a public API.
## TODO: Allow this for more than JAVA_LIBRARIES modules
## NOTE: this won't return reliable results until after all
## sub-makefiles have been included.
## $(1): target list
###########################################################
define module-stubs-files
$(foreach module,$(1),$(ALL_MODULES.$(module).STUBS))
endef
###########################################################
## Evaluates to the timestamp file for a doc module, which
## is the dependency that should be used.
## $(1): doc module
###########################################################
define doc-timestamp-for
$(OUT_DOCS)/$(strip $(1))-timestamp
endef
###########################################################
## Convert "core ext framework" to "out/.../javalib.jar ..."
## $(1): library list
## $(2): Non-empty if IS_HOST_MODULE
###########################################################
# $(1): library name
# $(2): Non-empty if IS_HOST_MODULE
define _java-lib-dir
$(call intermediates-dir-for, \
JAVA_LIBRARIES,$(1),$(2),COMMON)
endef
# $(1): library name
# $(2): Non-empty if IS_HOST_MODULE
define _java-lib-full-classes.jar
$(call _java-lib-dir,$(1),$(2))/classes$(COMMON_JAVA_PACKAGE_SUFFIX)
endef
# $(1): library name list
# $(2): Non-empty if IS_HOST_MODULE
define java-lib-files
$(foreach lib,$(1),$(call _java-lib-full-classes.jar,$(lib),$(2)))
endef
# $(1): library name
# $(2): Non-empty if IS_HOST_MODULE
define _java-lib-full-dep
$(call _java-lib-dir,$(1),$(2))/$(if $(2),javalib,classes)$(COMMON_JAVA_PACKAGE_SUFFIX)
endef
# $(1): library name list
# $(2): Non-empty if IS_HOST_MODULE
define java-lib-deps
$(foreach lib,$(1),$(call _java-lib-full-dep,$(lib),$(2)))
endef
###########################################################
## Run rot13 on a string
## $(1): the string. Must be one line.
###########################################################
define rot13
$(shell echo $(1) | tr 'a-zA-Z' 'n-za-mN-ZA-M')
endef
###########################################################
## Returns true if $(1) and $(2) are equal. Returns
## the empty string if they are not equal.
###########################################################
define streq
$(strip $(if $(strip $(1)),\
$(if $(strip $(2)),\
$(if $(filter-out __,_$(subst $(strip $(1)),,$(strip $(2)))$(subst $(strip $(2)),,$(strip $(1)))_),,true), \
),\
$(if $(strip $(2)),\
,\
true)\
))
endef
###########################################################
## Convert "a b c" into "a:b:c"
###########################################################
define normalize-path-list
$(subst $(space),:,$(strip $(1)))
endef
###########################################################
## Read the word out of a colon-separated list of words.
## This has the same behavior as the built-in function
## $(word n,str).
##
## The individual words may not contain spaces.
##
## $(1): 1 based index
## $(2): value of the form a:b:c...
###########################################################
define word-colon
$(word $(1),$(subst :,$(space),$(2)))
endef
###########################################################
## Convert "a=b c= d e = f" into "a=b c=d e=f"
##
## $(1): list to collapse
## $(2): if set, separator word; usually "=", ":", or ":="
## Defaults to "=" if not set.
###########################################################
define collapse-pairs
$(eval _cpSEP := $(strip $(if $(2),$(2),=)))\
$(subst $(space)$(_cpSEP)$(space),$(_cpSEP),$(strip \
$(subst $(_cpSEP), $(_cpSEP) ,$(1))))
endef
###########################################################
## Given a list of pairs, if multiple pairs have the same
## first components, keep only the first pair.
##
## $(1): list of pairs
## $(2): the separator word, such as ":", "=", etc.
define uniq-pairs-by-first-component
$(eval _upbfc_fc_set :=)\
$(strip $(foreach w,$(1), $(eval _first := $(word 1,$(subst $(2),$(space),$(w))))\
$(if $(filter $(_upbfc_fc_set),$(_first)),,$(w)\
$(eval _upbfc_fc_set += $(_first)))))\
$(eval _upbfc_fc_set :=)\
$(eval _first:=)
endef
###########################################################
## MODULE_TAG set operations
###########################################################
# Given a list of tags, return the targets that specify
# any of those tags.
# $(1): tag list
define modules-for-tag-list
$(sort $(foreach tag,$(1),$(ALL_MODULE_TAGS.$(tag))))
endef
# Same as modules-for-tag-list, but operates on
# ALL_MODULE_NAME_TAGS.
# $(1): tag list
define module-names-for-tag-list
$(sort $(foreach tag,$(1),$(ALL_MODULE_NAME_TAGS.$(tag))))
endef
# Given an accept and reject list, find the matching
# set of targets. If a target has multiple tags and
# any of them are rejected, the target is rejected.
# Reject overrides accept.
# $(1): list of tags to accept
# $(2): list of tags to reject
#TODO(dbort): do $(if $(strip $(1)),$(1),$(ALL_MODULE_TAGS))
#TODO(jbq): as of 20100106 nobody uses the second parameter
define get-tagged-modules
$(filter-out \
$(call modules-for-tag-list,$(2)), \
$(call modules-for-tag-list,$(1)))
endef
###########################################################
## Append a leaf to a base path. Properly deals with
## base paths ending in /.
##
## $(1): base path
## $(2): leaf path
###########################################################
define append-path
$(subst //,/,$(1)/$(2))
endef
###########################################################
## Package filtering
###########################################################
# Given a list of installed modules (short or long names)
# return a list of the packages (yes, .apk packages, not
# modules in general) that are overridden by this list and,
# therefore, should not be installed.
# $(1): mixed list of installed modules
# TODO: This is fragile; find a reliable way to get this information.
define _get-package-overrides
$(eval ### Discard any words containing slashes, unless they end in .apk, \
### in which case trim off the directory component and the suffix. \
### If there are no slashes, keep the entire word.)
$(eval _gpo_names := $(subst /,@@@ @@@,$(1)))
$(eval _gpo_names := \
$(filter %.apk,$(_gpo_names)) \
$(filter-out %@@@ @@@%,$(_gpo_names)))
$(eval _gpo_names := $(patsubst %.apk,%,$(_gpo_names)))
$(eval _gpo_names := $(patsubst @@@%,%,$(_gpo_names)))
$(eval ### Remove any remaining words that contain dots.)
$(eval _gpo_names := $(subst .,@@@ @@@,$(_gpo_names)))
$(eval _gpo_names := $(filter-out %@@@ @@@%,$(_gpo_names)))
$(eval ### Now we have a list of any words that could possibly refer to \
### packages, although there may be words that do not. Only \
### real packages will be present under PACKAGES.*, though.)
$(foreach _gpo_name,$(_gpo_names),$(PACKAGES.$(_gpo_name).OVERRIDES))
endef
define get-package-overrides
$(sort $(strip $(call _get-package-overrides,$(1))))
endef
###########################################################
## Output the command lines, or not
###########################################################
ifeq ($(strip $(SHOW_COMMANDS)),)
define pretty
@echo $1
endef
hide := @
else
define pretty
endef
hide :=
endif
###########################################################
## Dump the variables that are associated with targets
###########################################################
define dump-module-variables
@echo all_dependencies=$^
@echo PRIVATE_YACCFLAGS=$(PRIVATE_YACCFLAGS);
@echo PRIVATE_CFLAGS=$(PRIVATE_CFLAGS);
@echo PRIVATE_CPPFLAGS=$(PRIVATE_CPPFLAGS);
@echo PRIVATE_DEBUG_CFLAGS=$(PRIVATE_DEBUG_CFLAGS);
@echo PRIVATE_C_INCLUDES=$(PRIVATE_C_INCLUDES);
@echo PRIVATE_LDFLAGS=$(PRIVATE_LDFLAGS);
@echo PRIVATE_LDLIBS=$(PRIVATE_LDLIBS);
@echo PRIVATE_ARFLAGS=$(PRIVATE_ARFLAGS);
@echo PRIVATE_AAPT_FLAGS=$(PRIVATE_AAPT_FLAGS);
@echo PRIVATE_DX_FLAGS=$(PRIVATE_DX_FLAGS);
@echo PRIVATE_JAVACFLAGS=$(PRIVATE_JAVACFLAGS);
@echo PRIVATE_JAVA_LIBRARIES=$(PRIVATE_JAVA_LIBRARIES);
@echo PRIVATE_ALL_SHARED_LIBRARIES=$(PRIVATE_ALL_SHARED_LIBRARIES);
@echo PRIVATE_ALL_STATIC_LIBRARIES=$(PRIVATE_ALL_STATIC_LIBRARIES);
@echo PRIVATE_ALL_WHOLE_STATIC_LIBRARIES=$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES);
@echo PRIVATE_ALL_OBJECTS=$(PRIVATE_ALL_OBJECTS);
@echo PRIVATE_NO_CRT=$(PRIVATE_NO_CRT);
endef
###########################################################
## Commands for using sed to replace given variable values
###########################################################
define transform-variables
@mkdir -p $(dir $@)
@echo "Sed: $(if $(PRIVATE_MODULE),$(PRIVATE_MODULE),$@) <= $<"
$(hide) sed $(foreach var,$(REPLACE_VARS),-e "s/{{$(var)}}/$(subst /,\/,$(PWD)/$($(var)))/g") $< >$@
$(hide) if [ "$(suffix $@)" = ".sh" ]; then chmod a+rx $@; fi
endef
###########################################################
## Commands for munging the dependency files GCC generates
###########################################################
# $(1): the input .d file
# $(2): the output .P file
define transform-d-to-p-args
$(hide) cp $(1) $(2); \
sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
-e '/^$$/ d' -e 's/$$/ :/' < $(1) >> $(2); \
rm -f $(1)
endef
define transform-d-to-p
$(call transform-d-to-p-args,$(@:%.o=%.d),$(@:%.o=%.P))
endef
###########################################################
## Commands for running lex
###########################################################
define transform-l-to-cpp
@mkdir -p $(dir $@)
@echo "Lex: $(PRIVATE_MODULE) <= $<"
$(hide) $(LEX) -o$@ $<
endef
###########################################################
## Commands for running yacc
##
## Because the extension of c++ files can change, the
## extension must be specified in $1.
## E.g, "$(call transform-y-to-cpp,.cpp)"
###########################################################
define transform-y-to-cpp
@mkdir -p $(dir $@)
@echo "Yacc: $(PRIVATE_MODULE) <= $<"
$(YACC) $(PRIVATE_YACCFLAGS) -o $@ $<
touch $(@:$1=$(YACC_HEADER_SUFFIX))
echo '#ifndef '$(@F:$1=_h) > $(@:$1=.h)
echo '#define '$(@F:$1=_h) >> $(@:$1=.h)
cat $(@:$1=$(YACC_HEADER_SUFFIX)) >> $(@:$1=.h)
echo '#endif' >> $(@:$1=.h)
rm -f $(@:$1=$(YACC_HEADER_SUFFIX))
endef
###########################################################
## Commands to compile RenderScript to Java
###########################################################
define transform-renderscripts-to-java-and-bc
@echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)"
$(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR)
$(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/res/raw
$(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/src
$(hide) $(PRIVATE_RS_CC) \
-o $(PRIVATE_RS_OUTPUT_DIR)/res/raw \
-p $(PRIVATE_RS_OUTPUT_DIR)/src \
-d $(PRIVATE_RS_OUTPUT_DIR) \
-a $@ -MD \
$(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \
$(PRIVATE_RS_FLAGS) \
$(foreach inc,$(PRIVATE_RS_INCLUDES),$(addprefix -I , $(inc))) \
$(PRIVATE_RS_SOURCE_FILES)
$(hide) mkdir -p $(dir $@)
$(hide) touch $@
endef
define transform-bc-to-so
@echo "Renderscript compatibility: $(notdir $@) <= $(notdir $<)"
$(hide) mkdir -p $(dir $@)
$(hide) $(BCC_COMPAT) -O3 -o $(dir $@)/$(notdir $(<:.bc=.o)) -fPIC -shared \
-rt-path $(RS_PREBUILT_CLCORE) -mtriple $(RS_TRIPLE) $<
$(hide) $(PRIVATE_CXX) -shared -Wl,-soname,$(notdir $@) -nostdlib \
-Wl,-rpath,\$$ORIGIN/../lib \
$(dir $@)/$(notdir $(<:.bc=.o)) \
$(RS_PREBUILT_COMPILER_RT) \
-o $@ -L prebuilts/gcc/ \
-L $(TARGET_OUT_INTERMEDIATE_LIBRARIES) $(RS_PREBUILT_LIBPATH) \
-lRSSupport -lm -lc
endef
###########################################################
## Commands to compile RenderScript to C++
###########################################################
define transform-renderscripts-to-cpp-and-bc
@echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)"
$(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR)
$(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/
$(hide) $(PRIVATE_RS_CC) \
-o $(PRIVATE_RS_OUTPUT_DIR)/ \
-d $(PRIVATE_RS_OUTPUT_DIR) \
-a $@ -MD \
-reflect-c++ \
$(PRIVATE_RS_FLAGS) \
$(foreach inc,$(PRIVATE_RS_INCLUDES),$(addprefix -I , $(inc))) \
$(PRIVATE_RS_SOURCE_FILES)
$(hide) mkdir -p $(dir $@)
$(hide) touch $@
endef
###########################################################
## Commands for running aidl
###########################################################
define transform-aidl-to-java
@mkdir -p $(dir $@)
@echo "Aidl: $(PRIVATE_MODULE) <= $<"
$(hide) $(AIDL) -d$(patsubst %.java,%.P,$@) $(PRIVATE_AIDL_FLAGS) $< $@
endef
#$(AIDL) $(PRIVATE_AIDL_FLAGS) $< - | indent -nut -br -npcs -l1000 > $@
###########################################################
## Commands for running java-event-log-tags.py
###########################################################
define transform-logtags-to-java
@mkdir -p $(dir $@)
@echo "logtags: $@ <= $<"
$(hide) $(JAVATAGS) -o $@ $^
endef
###########################################################
## Commands for running protoc to compile .proto into .java
###########################################################
define transform-proto-to-java
@mkdir -p $(dir $@)
@echo "Protoc: $@ <= $(PRIVATE_PROTO_SRC_FILES)"
@rm -rf $(PRIVATE_PROTO_JAVA_OUTPUT_DIR)
@mkdir -p $(PRIVATE_PROTO_JAVA_OUTPUT_DIR)
$(hide) for f in $(PRIVATE_PROTO_SRC_FILES); do \
$(PROTOC) \
$(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
$(PRIVATE_PROTO_JAVA_OUTPUT_OPTION)="$(PRIVATE_PROTO_JAVA_OUTPUT_PARAMS):$(PRIVATE_PROTO_JAVA_OUTPUT_DIR)" \
$(PRIVATE_PROTOC_FLAGS) \
$$f || exit 33; \
done
$(hide) touch $@
endef
######################################################################
## Commands for running protoc to compile .proto into .pb.cc and .pb.h
######################################################################
define transform-proto-to-cc
@mkdir -p $(dir $@)
@echo "Protoc: $@ <= $<"
$(hide) $(PROTOC) \
$(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
$(PRIVATE_PROTOC_FLAGS) \
--cpp_out=$(PRIVATE_PROTO_CC_OUTPUT_DIR) $<
endef
###########################################################
## Commands for running gcc to compile a C++ file
###########################################################
define transform-cpp-to-o
@mkdir -p $(dir $@)
@echo "target $(PRIVATE_ARM_MODE) C++: $(PRIVATE_MODULE) <= $<"
$(hide) $(PRIVATE_CXX) \
$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
$(addprefix -isystem ,\
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(filter-out $(PRIVATE_C_INCLUDES), \
$(PRIVATE_TARGET_PROJECT_INCLUDES) \
$(PRIVATE_TARGET_C_INCLUDES)))) \
-c \
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(PRIVATE_TARGET_GLOBAL_CFLAGS) \
$(PRIVATE_TARGET_GLOBAL_CPPFLAGS) \
$(PRIVATE_ARM_CFLAGS) \
) \
$(PRIVATE_RTTI_FLAG) \
$(PRIVATE_CFLAGS) \
$(PRIVATE_CPPFLAGS) \
$(PRIVATE_DEBUG_CFLAGS) \
-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
$(transform-d-to-p)
endef
###########################################################
## Commands for running gcc to compile a C file
###########################################################
# $(1): extra flags
define transform-c-or-s-to-o-no-deps
@mkdir -p $(dir $@)
$(hide) $(PRIVATE_CC) \
$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
$(addprefix -isystem ,\
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(filter-out $(PRIVATE_C_INCLUDES), \
$(PRIVATE_TARGET_PROJECT_INCLUDES) \
$(PRIVATE_TARGET_C_INCLUDES)))) \
-c \
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(PRIVATE_TARGET_GLOBAL_CFLAGS) \
$(PRIVATE_ARM_CFLAGS) \
) \
$(1) \
-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
endef
define transform-c-to-o-no-deps
@echo "target $(PRIVATE_ARM_MODE) C: $(PRIVATE_MODULE) <= $<"
$(call transform-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) $(PRIVATE_DEBUG_CFLAGS))
endef
define transform-s-to-o-no-deps
@echo "target asm: $(PRIVATE_MODULE) <= $<"
$(call transform-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS))
endef
define transform-c-to-o
$(transform-c-to-o-no-deps)
$(transform-d-to-p)
endef
define transform-s-to-o
$(transform-s-to-o-no-deps)
$(transform-d-to-p)
endef
###########################################################
## Commands for running gcc to compile an Objective-C file
## This should never happen for target builds but this
## will error at build time.
###########################################################
define transform-m-to-o-no-deps
@echo "target ObjC: $(PRIVATE_MODULE) <= $<"
$(call transform-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS))
endef
define transform-m-to-o
$(transform-m-to-o-no-deps)
$(transform-d-to-p)
endef
###########################################################
## Commands for running gcc to compile a host C++ file
###########################################################
define transform-host-cpp-to-o
@mkdir -p $(dir $@)
@echo "host C++: $(PRIVATE_MODULE) <= $<"
$(hide) $(PRIVATE_CXX) \
$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
$(addprefix -isystem ,\
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(filter-out $(PRIVATE_C_INCLUDES), \
$(HOST_PROJECT_INCLUDES) \
$(PRIVATE_HOST_C_INCLUDES)))) \
-c \
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(PRIVATE_HOST_GLOBAL_CFLAGS) \
$(PRIVATE_HOST_GLOBAL_CPPFLAGS) \
) \
$(PRIVATE_CFLAGS) \
$(PRIVATE_CPPFLAGS) \
$(PRIVATE_DEBUG_CFLAGS) \
-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
$(transform-d-to-p)
endef
###########################################################
## Commands for running gcc to compile a host C file
###########################################################
# $(1): extra flags
define transform-host-c-or-s-to-o-no-deps
@mkdir -p $(dir $@)
$(hide) $(PRIVATE_CC) \
$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
$(addprefix -isystem ,\
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(filter-out $(PRIVATE_C_INCLUDES), \
$(HOST_PROJECT_INCLUDES) \
$(PRIVATE_HOST_C_INCLUDES)))) \
-c \
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(PRIVATE_HOST_GLOBAL_CFLAGS) \
) \
$(1) \
-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
endef
define transform-host-c-to-o-no-deps
@echo "host C: $(PRIVATE_MODULE) <= $<"
$(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) $(PRIVATE_DEBUG_CFLAGS))
endef
define transform-host-s-to-o-no-deps
@echo "host asm: $(PRIVATE_MODULE) <= $<"
$(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS))
endef
define transform-host-c-to-o
$(transform-host-c-to-o-no-deps)
$(transform-d-to-p)
endef
define transform-host-s-to-o
$(transform-host-s-to-o-no-deps)
$(transform-d-to-p)
endef
###########################################################
## Commands for running gcc to compile a host Objective-C file
###########################################################
define transform-host-m-to-o-no-deps
@echo "host ObjC: $(PRIVATE_MODULE) <= $<"
$(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS))
endef
define transform-host-m-to-o
$(transform-host-m-to-o-no-deps)
$(transform-d-to-p)
endef
###########################################################
## Commands for running ar
###########################################################
define _concat-if-arg2-not-empty
$(if $(2),$(hide) $(1) $(2))
endef
# Split long argument list into smaller groups and call the command repeatedly
# Call the command at least once even if there are no arguments, as otherwise
# the output file won't be created.
#
# $(1): the command without arguments
# $(2): the arguments
define split-long-arguments
$(hide) $(1) $(wordlist 1,500,$(2))
$(call _concat-if-arg2-not-empty,$(1),$(wordlist 501,1000,$(2)))
$(call _concat-if-arg2-not-empty,$(1),$(wordlist 1001,1500,$(2)))
$(call _concat-if-arg2-not-empty,$(1),$(wordlist 1501,2000,$(2)))
$(call _concat-if-arg2-not-empty,$(1),$(wordlist 2001,2500,$(2)))
$(call _concat-if-arg2-not-empty,$(1),$(wordlist 2501,3000,$(2)))
$(call _concat-if-arg2-not-empty,$(1),$(wordlist 3001,99999,$(2)))
endef
# $(1): the full path of the source static library.
define _extract-and-include-single-target-whole-static-lib
@echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(1)]"
$(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\
rm -rf $$ldir; \
mkdir -p $$ldir; \
filelist=; \
for f in `$(TARGET_AR) t $(1)`; do \
$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) p $(1) $$f > $$ldir/$$f; \
filelist="$$filelist $$ldir/$$f"; \
done ; \
$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \
$(PRIVATE_ARFLAGS) $@ $$filelist
endef
define extract-and-include-target-whole-static-libs
$(foreach lib,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES), \
$(call _extract-and-include-single-target-whole-static-lib, $(lib)))
endef
# Explicitly delete the archive first so that ar doesn't
# try to add to an existing archive.
define transform-o-to-static-lib
@mkdir -p $(dir $@)
@rm -f $@
$(extract-and-include-target-whole-static-libs)
@echo "target StaticLib: $(PRIVATE_MODULE) ($@)"
$(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \
$(PRIVATE_ARFLAGS) $@,$(filter %.o, $^))
endef
###########################################################
## Commands for running host ar
###########################################################
# $(1): the full path of the source static library.
define _extract-and-include-single-host-whole-static-lib
@echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(1)]"
$(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\
rm -rf $$ldir; \
mkdir -p $$ldir; \
filelist=; \
for f in `$(HOST_AR) t $(1) | \grep '\.o$$'`; do \
$(HOST_AR) p $(1) $$f > $$ldir/$$f; \
filelist="$$filelist $$ldir/$$f"; \
done ; \
$(HOST_AR) $(HOST_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@ $$filelist
endef
define extract-and-include-host-whole-static-libs
$(foreach lib,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES), \
$(call _extract-and-include-single-host-whole-static-lib, $(lib)))
endef
# Explicitly delete the archive first so that ar doesn't
# try to add to an existing archive.
define transform-host-o-to-static-lib
@mkdir -p $(dir $@)
@rm -f $@
$(extract-and-include-host-whole-static-libs)
@echo "host StaticLib: $(PRIVATE_MODULE) ($@)"
$(call split-long-arguments,$(HOST_AR) $(HOST_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@,$(filter %.o, $^))
endef
###########################################################
## Commands for running gcc to link a shared library or package
###########################################################
# ld just seems to be so finicky with command order that we allow
# it to be overriden en-masse see combo/linux-arm.make for an example.
ifneq ($(HOST_CUSTOM_LD_COMMAND),true)
define transform-host-o-to-shared-lib-inner
$(hide) $(PRIVATE_CXX) \
-Wl,-rpath-link=$(HOST_OUT_INTERMEDIATE_LIBRARIES) \
-Wl,-rpath,\$$ORIGIN/../lib \
-shared -Wl,-soname,$(notdir $@) \
$(PRIVATE_LDFLAGS) \
$(HOST_GLOBAL_LD_DIRS) \
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(PRIVATE_HOST_GLOBAL_LDFLAGS) \
) \
$(PRIVATE_ALL_OBJECTS) \
-Wl,--whole-archive \
$(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
-Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-host-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
$(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-o $@ \
$(PRIVATE_LDLIBS)
endef
endif
define transform-host-o-to-shared-lib
@mkdir -p $(dir $@)
@echo "host SharedLib: $(PRIVATE_MODULE) ($@)"
$(transform-host-o-to-shared-lib-inner)
endef
define transform-host-o-to-package
@mkdir -p $(dir $@)
@echo "host Package: $(PRIVATE_MODULE) ($@)"
$(transform-host-o-to-shared-lib-inner)
endef
###########################################################
## Commands for running gcc to link a shared library or package
###########################################################
#echo >$@.vers "{"; \
#echo >>$@.vers " global:"; \
#$(BUILD_SYSTEM)/filter_symbols.sh $(TARGET_NM) " " ";" $(filter %.o,$^) | sort -u >>$@.vers; \
#echo >>$@.vers " local:"; \
#echo >>$@.vers " *;"; \
#echo >>$@.vers "};"; \
# -Wl,--version-script=$@.vers \
# ld just seems to be so finicky with command order that we allow
# it to be overriden en-masse see combo/linux-arm.make for an example.
ifneq ($(TARGET_CUSTOM_LD_COMMAND),true)
define transform-o-to-shared-lib-inner
$(hide) $(PRIVATE_CXX) \
$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
-Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \
-Wl,-rpath,\$$ORIGIN/../lib \
-shared -Wl,-soname,$(notdir $@) \
$(PRIVATE_LDFLAGS) \
$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
$(PRIVATE_ALL_OBJECTS) \
-Wl,--whole-archive \
$(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
-Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-o $@ \
$(PRIVATE_LDLIBS)
endef
endif
define transform-o-to-shared-lib
@mkdir -p $(dir $@)
@echo "target SharedLib: $(PRIVATE_MODULE) ($@)"
$($(PRIVATE_2ND_ARCH_VAR_PREFIX)transform-o-to-shared-lib-inner)
endef
###########################################################
## Commands for filtering a target executable or library
###########################################################
define transform-to-stripped
@mkdir -p $(dir $@)
@echo "target Strip: $(PRIVATE_MODULE) ($@)"
$(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_STRIP_COMMAND)
endef
###########################################################
## Commands for running gcc to link an executable
###########################################################
ifneq ($(TARGET_CUSTOM_LD_COMMAND),true)
define transform-o-to-executable-inner
$(hide) $(PRIVATE_CXX) \
$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
-Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \
-Wl,-rpath,\$$ORIGIN/../lib \
$(PRIVATE_LDFLAGS) \
$(PRIVATE_ALL_OBJECTS) \
-Wl,--whole-archive \
$(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
-Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-o $@ \
$(PRIVATE_LDLIBS)
endef
endif
define transform-o-to-executable
@mkdir -p $(dir $@)
@echo "target Executable: $(PRIVATE_MODULE) ($@)"
$($(PRIVATE_2ND_ARCH_VAR_PREFIX)transform-o-to-executable-inner)
endef
###########################################################
## Commands for running gcc to link a statically linked
## executable. In practice, we only use this on arm, so
## the other platforms don't have the
## transform-o-to-static-executable defined
###########################################################
ifneq ($(TARGET_CUSTOM_LD_COMMAND),true)
define transform-o-to-static-executable-inner
endef
endif
define transform-o-to-static-executable
@mkdir -p $(dir $@)
@echo "target StaticExecutable: $(PRIVATE_MODULE) ($@)"
$($(PRIVATE_2ND_ARCH_VAR_PREFIX)transform-o-to-static-executable-inner)
endef
###########################################################
## Commands for running gcc to link a host executable
###########################################################
ifneq ($(HOST_CUSTOM_LD_COMMAND),true)
define transform-host-o-to-executable-inner
$(hide) $(PRIVATE_CXX) \
$(PRIVATE_ALL_OBJECTS) \
-Wl,--whole-archive \
$(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
-Wl,--no-whole-archive \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
$(call normalize-host-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
$(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-Wl,-rpath-link=$(HOST_OUT_INTERMEDIATE_LIBRARIES) \
-Wl,-rpath,\$$ORIGIN/../lib \
$(HOST_GLOBAL_LD_DIRS) \
$(PRIVATE_LDFLAGS) \
$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
$(PRIVATE_HOST_GLOBAL_LDFLAGS) \
-fPIE -pie \
) \
-o $@ \
$(PRIVATE_LDLIBS)
endef
endif
define transform-host-o-to-executable
@mkdir -p $(dir $@)
@echo "host Executable: $(PRIVATE_MODULE) ($@)"
$(transform-host-o-to-executable-inner)
endef
###########################################################
## Commands for running javac to make .class files
###########################################################
#@echo "Source intermediates dir: $(PRIVATE_SOURCE_INTERMEDIATES_DIR)"
#@echo "Source intermediates: $$(find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java')"
# TODO: Right now we generate the asset resources twice, first as part
# of generating the Java classes, then at the end when packaging the final
# assets. This should be changed to do one of two things: (1) Don't generate
# any resource files the first time, only create classes during that stage;
# or (2) Don't use the -c flag with the second stage, instead taking the
# resource files from the first stage as additional input. My original intent
# was to use approach (2), but this requires a little more work in the tool.
# Maybe we should just use approach (1).
# This rule creates the R.java and Manifest.java files, both of which
# are PRODUCT-neutral. Don't pass PRIVATE_PRODUCT_AAPT_CONFIG to this invocation.
define create-resource-java-files
@mkdir -p $(PRIVATE_SOURCE_INTERMEDIATES_DIR)
@mkdir -p $(dir $(PRIVATE_RESOURCE_PUBLICS_OUTPUT))
$(hide) $(AAPT) package $(PRIVATE_AAPT_FLAGS) -m \
$(eval # PRIVATE_PRODUCT_AAPT_CONFIG is intentionally missing-- see comment.) \
$(addprefix -J , $(PRIVATE_SOURCE_INTERMEDIATES_DIR)) \
$(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \
$(addprefix -P , $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) \
$(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \
$(addprefix -A , $(PRIVATE_ASSET_DIR)) \
$(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \
$(addprefix -G , $(PRIVATE_PROGUARD_OPTIONS_FILE)) \
$(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \
$(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \
$(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-code , $(PLATFORM_SDK_VERSION))) \
$(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-name , $(PLATFORM_VERSION)-$(BUILD_NUMBER))) \
$(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \
$(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR))
endef
ifeq ($(HOST_OS),windows)
xlint_unchecked :=
else
xlint_unchecked := -Xlint:unchecked
endif
ifeq (true, $(ENABLE_INCREMENTALJAVAC))
incremental_dex := --incremental
else
incremental_dex :=
endif
# emit-line, <word list>, <output file>
define emit-line
$(if $(1),echo -n '$(strip $(1)) ' >> $(2))
endef
# dump-words-to-file, <word list>, <output file>
define dump-words-to-file
@rm -f $(2)
@$(call emit-line,$(wordlist 1,200,$(1)),$(2))
@$(call emit-line,$(wordlist 201,400,$(1)),$(2))
@$(call emit-line,$(wordlist 401,600,$(1)),$(2))
@$(call emit-line,$(wordlist 601,800,$(1)),$(2))
@$(call emit-line,$(wordlist 801,1000,$(1)),$(2))
@$(call emit-line,$(wordlist 1001,1200,$(1)),$(2))
@$(call emit-line,$(wordlist 1201,1400,$(1)),$(2))
@$(call emit-line,$(wordlist 1401,1600,$(1)),$(2))
@$(call emit-line,$(wordlist 1601,1800,$(1)),$(2))
@$(call emit-line,$(wordlist 1801,2000,$(1)),$(2))
@$(call emit-line,$(wordlist 2001,2200,$(1)),$(2))
@$(call emit-line,$(wordlist 2201,2400,$(1)),$(2))
@$(call emit-line,$(wordlist 2401,2600,$(1)),$(2))
@$(call emit-line,$(wordlist 2601,2800,$(1)),$(2))
@$(call emit-line,$(wordlist 2801,3000,$(1)),$(2))
@$(call emit-line,$(wordlist 3001,3200,$(1)),$(2))
@$(call emit-line,$(wordlist 3201,3400,$(1)),$(2))
@$(call emit-line,$(wordlist 3401,3600,$(1)),$(2))
@$(call emit-line,$(wordlist 3601,3800,$(1)),$(2))
@$(call emit-line,$(wordlist 3801,4000,$(1)),$(2))
@$(call emit-line,$(wordlist 4001,4200,$(1)),$(2))
@$(call emit-line,$(wordlist 4201,4400,$(1)),$(2))
@$(call emit-line,$(wordlist 4401,4600,$(1)),$(2))
@$(call emit-line,$(wordlist 4601,4800,$(1)),$(2))
@$(call emit-line,$(wordlist 4801,5000,$(1)),$(2))
@$(if $(wordlist 5001,5002,$(1)),$(error Too many words ($(words $(1)))))
endef
# For a list of jar files, unzip them to a specified directory,
# but make sure that no META-INF files come along for the ride.
#
# $(1): files to unzip
# $(2): destination directory
define unzip-jar-files
$(hide) for f in $(1); \
do \
if [ ! -f $$f ]; then \
echo Missing file $$f; \
exit 1; \
fi; \
unzip -qo $$f -d $(2); \
done \
$(if $(PRIVATE_DONT_DELETE_JAR_META_INF),,;rm -rf $(2)/META-INF)
endef
# Common definition to invoke javac on the host and target.
#
# Some historical notes:
# - below we write the list of java files to java-source-list to avoid argument
# list length problems with Cygwin
# - we filter out duplicate java file names because eclipse's compiler
# doesn't like them.
#
# $(1): javac
# $(2): bootclasspath
define compile-java
$(hide) rm -f $@
$(hide) rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR)
$(hide) mkdir -p $(dir $@)
$(hide) mkdir -p $(PRIVATE_CLASS_INTERMEDIATES_DIR)
$(call unzip-jar-files,$(PRIVATE_STATIC_JAVA_LIBRARIES),$(PRIVATE_CLASS_INTERMEDIATES_DIR))
$(call dump-words-to-file,$(PRIVATE_JAVA_SOURCES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list)
$(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \
find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \
fi
$(hide) tr ' ' '\n' < $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list \
| sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
$(hide) if [ -s $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \
$(1) -encoding UTF-8 \
$(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) \
$(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \
$(2) \
$(addprefix -classpath ,$(strip \
$(call normalize-path-list,$(PRIVATE_ALL_JAVA_LIBRARIES)))) \
$(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \
-extdirs "" -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) \
$(PRIVATE_JAVACFLAGS) \
\@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq \
|| ( rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) ; exit 41 ) \
fi
$(if $(PRIVATE_JAVA_LAYERS_FILE), $(hide) build/tools/java-layers.py \
$(PRIVATE_JAVA_LAYERS_FILE) \@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq,)
$(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list
$(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
$(if $(PRIVATE_JAR_EXCLUDE_FILES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) \
-name $(word 1, $(PRIVATE_JAR_EXCLUDE_FILES)) \
$(addprefix -o -name , $(wordlist 2, 999, $(PRIVATE_JAR_EXCLUDE_FILES))) \
| xargs rm -rf)
$(if $(PRIVATE_JAR_PACKAGES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -mindepth 1 -type d \
$(foreach pkg, $(PRIVATE_JAR_PACKAGES), \
-not -path $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))) \
| xargs rm -rf)
$(hide) jar $(if $(strip $(PRIVATE_JAR_MANIFEST)),-cfm,-cf) \
$@ $(PRIVATE_JAR_MANIFEST) -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) .
endef
define transform-java-to-classes.jar
@echo "target Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))"
$(call compile-java,$(TARGET_JAVAC),$(PRIVATE_BOOTCLASSPATH))
endef
# Override the above definitions if we want to do incremetal javac
ifeq (true, $(ENABLE_INCREMENTALJAVAC))
define compile-java
$(hide) mkdir -p $(dir $@)
$(hide) mkdir -p $(PRIVATE_CLASS_INTERMEDIATES_DIR)
$(hide) touch $(PRIVATE_CLASS_INTERMEDIATES_DIR)/newstamp
$(call unzip-jar-files,$(PRIVATE_STATIC_JAVA_LIBRARIES),$(PRIVATE_CLASS_INTERMEDIATES_DIR))
$(hide) if [ -e $(PRIVATE_CLASS_INTERMEDIATES_DIR)/stamp ] ; then \
newerFlag=$$(echo -n "-newer $(PRIVATE_CLASS_INTERMEDIATES_DIR)/stamp") ; \
fi ; \
find $(PRIVATE_JAVA_SOURCES) $$newerFlag > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list ; \
if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \
find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' $$newerFlag >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \
fi
$(hide) tr ' ' '\n' < $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list \
| sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
@echo "(Incremental) build source files:"
@cat $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
$(hide) if [ -s $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \
$(1) -encoding UTF-8 \
$(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) \
$(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \
$(2) \
$(addprefix -classpath ,$(strip \
$(call normalize-path-list,$(PRIVATE_ALL_JAVA_LIBRARIES) $(PRIVATE_CLASS_INTERMEDIATES_DIR)))) \
$(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \
-extdirs "" -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) \
$(PRIVATE_JAVACFLAGS) \
\@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq \
|| ( exit 41 ) \
fi
$(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list
$(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
$(hide) rm -f $@
$(if $(PRIVATE_JAR_EXCLUDE_FILES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) \
-name $(word 1, $(PRIVATE_JAR_EXCLUDE_FILES)) \
$(addprefix -o -name , $(wordlist 2, 999, $(PRIVATE_JAR_EXCLUDE_FILES))) \
| xargs rm -rf)
$(if $(PRIVATE_JAR_PACKAGES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -mindepth 1 -type d \
$(foreach pkg, $(PRIVATE_JAR_PACKAGES), \
-not -path $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))) \
| xargs rm -rf)
$(hide) jar $(if $(strip $(PRIVATE_JAR_MANIFEST)),-cfm,-cf) \
$@ $(PRIVATE_JAR_MANIFEST) -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) .
$(hide) mv $(PRIVATE_CLASS_INTERMEDIATES_DIR)/newstamp $(PRIVATE_CLASS_INTERMEDIATES_DIR)/stamp
endef
define transform-java-to-classes.jar
@echo "target Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))"
$(call compile-java,$(TARGET_JAVAC),$(PRIVATE_BOOTCLASSPATH))
endef
endif # ENABLE_INCREMENTALJAVAC
define transform-classes.jar-to-emma
$(hide) java -classpath $(EMMA_JAR) emma instr -outmode fullcopy -outfile \
$(PRIVATE_EMMA_COVERAGE_FILE) -ip $< -d $(PRIVATE_EMMA_INTERMEDIATES_DIR) \
$(addprefix -ix , $(PRIVATE_EMMA_COVERAGE_FILTER))
endef
#TODO: use a smaller -Xmx value for most libraries;
# only core.jar and framework.jar need a heap this big.
# Avoid the memory arguments on Windows, dx fails to load for some reason with them.
define transform-classes.jar-to-dex
@echo "target Dex: $(PRIVATE_MODULE)"
@mkdir -p $(dir $@)
$(hide) $(DX) \
$(if $(findstring windows,$(HOST_OS)),,-JXms16M -JXmx2048M) \
--dex --output=$@ \
$(incremental_dex) \
$(if $(NO_OPTIMIZE_DX), \
--no-optimize) \
$(if $(GENERATE_DEX_DEBUG), \
--debug --verbose \
--dump-to=$(@:.dex=.lst) \
--dump-width=1000) \
$(PRIVATE_DX_FLAGS) \
$<
endef
# Create a mostly-empty .jar file that we'll add to later.
# The MacOS jar tool doesn't like creating empty jar files,
# so we need to give it something.
define create-empty-package
@mkdir -p $(dir $@)
$(hide) touch $(dir $@)/dummy
$(hide) (cd $(dir $@) && jar cf $(notdir $@) dummy)
$(hide) zip -qd $@ dummy
$(hide) rm $(dir $@)/dummy
endef
#TODO: we kinda want to build different asset packages for
# different configurations, then combine them later (or something).
# Per-locale, etc.
# A list of dynamic and static parameters; build layers for
# dynamic params that lay over the static ones.
#TODO: update the manifest to point to the package file
#Note that the version numbers are given to aapt as simple default
#values; applications can override these by explicitly stating
#them in their manifest.
define add-assets-to-package
$(hide) $(AAPT) package -u $(PRIVATE_AAPT_FLAGS) \
$(addprefix -c , $(PRIVATE_PRODUCT_AAPT_CONFIG)) \
$(addprefix --preferred-configurations , $(PRIVATE_PRODUCT_AAPT_PREF_CONFIG)) \
$(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \
$(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \
$(addprefix -A , $(PRIVATE_ASSET_DIR)) \
$(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \
$(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \
$(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \
$(addprefix --product , $(TARGET_AAPT_CHARACTERISTICS)) \
$(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-code , $(PLATFORM_SDK_VERSION))) \
$(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-name , $(PLATFORM_VERSION)-$(BUILD_NUMBER))) \
$(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \
$(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \
-F $@
endef
define add-jni-shared-libs-to-package
$(hide) rm -rf $(dir $@)lib
$(hide) mkdir -p $(dir $@)lib/$(PRIVATE_JNI_SHARED_LIBRARIES_ABI)
$(hide) cp $(PRIVATE_JNI_SHARED_LIBRARIES) $(dir $@)lib/$(PRIVATE_JNI_SHARED_LIBRARIES_ABI)
$(hide) (cd $(dir $@) && zip -r $(notdir $@) lib)
$(hide) rm -rf $(dir $@)lib
endef
#TODO: update the manifest to point to the dex file
define add-dex-to-package
$(if $(filter classes.dex,$(notdir $(PRIVATE_DEX_FILE))),\
$(hide) zip -qj $@ $(PRIVATE_DEX_FILE),\
$(hide) _adtp_classes_dex=$(dir $(PRIVATE_DEX_FILE))classes.dex; \
cp $(PRIVATE_DEX_FILE) $$_adtp_classes_dex && \
zip -qj $@ $$_adtp_classes_dex && rm -f $$_adtp_classes_dex)
endef
# Add java resources added by the current module.
#
define add-java-resources-to-package
$(call dump-words-to-file, $(PRIVATE_EXTRA_JAR_ARGS), $(dir $@)jar-arg-list)
$(hide) jar uf $@ @$(dir $@)jar-arg-list
@rm -f $(dir $@)jar-arg-list
endef
# Add java resources carried by static Java libraries.
#
define add-carried-java-resources
$(hide) if [ -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) ] ; then \
java_res_jar_flags=$$(find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -type f -a -not -name "*.class" \
| sed -e "s?^$(PRIVATE_CLASS_INTERMEDIATES_DIR)/? -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) ?"); \
if [ -n "$$java_res_jar_flags" ] ; then \
echo $$java_res_jar_flags >$(dir $@)java_res_jar_flags; \
jar uf $@ $$java_res_jar_flags; \
fi; \
fi
endef
# Sign a package using the specified key/cert.
#
define sign-package
$(hide) mv $@ $@.unsigned
$(hide) java -jar $(SIGNAPK_JAR) \
$(PRIVATE_CERTIFICATE) $(PRIVATE_PRIVATE_KEY) \
$(PRIVATE_ADDITIONAL_CERTIFICATES) $@.unsigned $@.signed
$(hide) mv $@.signed $@
endef
# Align STORED entries of a package on 4-byte boundaries
# to make them easier to mmap.
#
define align-package
$(hide) mv $@ $@.unaligned
$(hide) $(ZIPALIGN) -f 4 $@.unaligned $@.aligned
$(hide) mv $@.aligned $@
endef
define install-dex-debug
$(hide) if [ -f "$(PRIVATE_INTERMEDIATES_DIR)/classes.dex" ]; then \
mkdir -p $(TOP)/dalvik/DEBUG-FILES; \
$(ACP) $(PRIVATE_INTERMEDIATES_DIR)/classes.dex \
$(TOP)/dalvik/DEBUG-FILES/$(PRIVATE_MODULE).dex; \
fi
$(hide) if [ -f "$(PRIVATE_INTERMEDIATES_DIR)/classes.lst" ]; then \
mkdir -p $(TOP)/dalvik/DEBUG-FILES; \
$(ACP) $(PRIVATE_INTERMEDIATES_DIR)/classes.lst \
$(TOP)/dalvik/DEBUG-FILES/$(PRIVATE_MODULE).lst; \
fi
endef
# TODO(joeo): If we can ever upgrade to post 3.81 make and get the
# new prebuilt rules to work, we should change this to copy the
# resources to the out directory and then copy the resources.
# Note: we intentionally don't clean PRIVATE_CLASS_INTERMEDIATES_DIR
# in transform-java-to-classes for the sake of vm-tests.
define transform-host-java-to-package
@echo "host Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))"
$(call compile-java,$(HOST_JAVAC),$(PRIVATE_BOOTCLASSPATH))
$(if $(PRIVATE_EXTRA_JAR_ARGS), $(call add-java-resources-to-package))
endef
###########################################################
## Commands for copying files
###########################################################
# Define a rule to copy a header. Used via $(eval) by copy_headers.make.
# $(1): source header
# $(2): destination header
define copy-one-header
$(2): $(1)
@echo "Header: $$@"
$$(copy-file-to-new-target-with-cp)
endef
# Define a rule to copy a file. For use via $(eval).
# $(1): source file
# $(2): destination file
define copy-one-file
$(2): $(1) | $(ACP)
@echo "Copy: $$@"
$$(copy-file-to-target)
endef
# Copies many files.
# $(1): The files to copy. Each entry is a ':' separated src:dst pair
# Evaluates to the list of the dst files (ie suitable for a dependency list)
define copy-many-files
$(foreach f, $(1), $(strip \
$(eval _cmf_tuple := $(subst :, ,$(f))) \
$(eval _cmf_src := $(word 1,$(_cmf_tuple))) \
$(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \
$(eval $(call copy-one-file,$(_cmf_src),$(_cmf_dest))) \
$(_cmf_dest)))
endef
# Copy the file only if it's a well-formed xml file. For use via $(eval).
# $(1): source file
# $(2): destination file, must end with .xml.
define copy-xml-file-checked
$(2): $(1) | $(ACP)
@echo "Copy xml: $$@"
$(hide) xmllint $$< >/dev/null # Don't print the xml file to stdout.
$$(copy-file-to-target)
endef
# The -t option to acp and the -p option to cp is
# required for OSX. OSX has a ridiculous restriction
# where it's an error for a .a file's modification time
# to disagree with an internal timestamp, and this
# macro is used to install .a files (among other things).
# Copy a single file from one place to another,
# preserving permissions and overwriting any existing
# file.
# We disable the "-t" option for acp cannot handle
# high resolution timestamp correctly on file systems like ext4.
# Therefore copy-file-to-target is the same as copy-file-to-new-target.
define copy-file-to-target
@mkdir -p $(dir $@)
$(hide) $(ACP) -fp $< $@
endef
# The same as copy-file-to-target, but use the local
# cp command instead of acp.
define copy-file-to-target-with-cp
@mkdir -p $(dir $@)
$(hide) cp -fp $< $@
endef
# The same as copy-file-to-target, but use the zipalign tool to do so.
define copy-file-to-target-with-zipalign
@mkdir -p $(dir $@)
$(hide) $(ZIPALIGN) -f 4 $< $@
endef
# The same as copy-file-to-target, but strip out "# comment"-style
# comments (for config files and such).
define copy-file-to-target-strip-comments
@mkdir -p $(dir $@)
$(hide) sed -e 's/#.*$$//' -e 's/[ \t]*$$//' -e '/^$$/d' < $< > $@
endef
# The same as copy-file-to-target, but don't preserve
# the old modification time.
define copy-file-to-new-target
@mkdir -p $(dir $@)
$(hide) $(ACP) -fp $< $@
endef
# The same as copy-file-to-new-target, but use the local
# cp command instead of acp.
define copy-file-to-new-target-with-cp
@mkdir -p $(dir $@)
$(hide) cp -f $< $@
endef
# Copy a prebuilt file to a target location.
define transform-prebuilt-to-target
@echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt: $(PRIVATE_MODULE) ($@)"
$(copy-file-to-target)
endef
# Copy a prebuilt file to a target location, using zipalign on it.
define transform-prebuilt-to-target-with-zipalign
@echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt APK: $(PRIVATE_MODULE) ($@)"
$(copy-file-to-target-with-zipalign)
endef
# Copy a prebuilt file to a target location, stripping "# comment" comments.
define transform-prebuilt-to-target-strip-comments
@echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt: $(PRIVATE_MODULE) ($@)"
$(copy-file-to-target-strip-comments)
endef
###########################################################
## On some platforms (MacOS), after copying a static
## library, ranlib must be run to update an internal
## timestamp!?!?!
###########################################################
ifeq ($(HOST_RUN_RANLIB_AFTER_COPYING),true)
define transform-host-ranlib-copy-hack
$(hide) ranlib $@ || true
endef
else
define transform-host-ranlib-copy-hack
@true
endef
endif
ifeq ($(TARGET_RUN_RANLIB_AFTER_COPYING),true)
define transform-ranlib-copy-hack
$(hide) ranlib $@
endef
else
define transform-ranlib-copy-hack
@true
endef
endif
###########################################################
## Commands to call Proguard
###########################################################
define transform-jar-to-proguard
@echo Proguard: $@
$(hide) $(PROGUARD) -injars $< -outjars $@ $(PRIVATE_PROGUARD_FLAGS)
endef
###########################################################
## Stuff source generated from one-off tools
###########################################################
define transform-generated-source
@echo "target Generated: $(PRIVATE_MODULE) <= $<"
@mkdir -p $(dir $@)
$(hide) $(PRIVATE_CUSTOM_TOOL)
endef
###########################################################
## Assertions about attributes of the target
###########################################################
# $(1): The file to check
ifndef get-file-size
$(error HOST_OS must define get-file-size)
endif
# Convert a partition data size (eg, as reported in /proc/mtd) to the
# size of the image used to flash that partition (which includes a
# spare area for each page).
# $(1): the partition data size
define image-size-from-data-size
$(strip $(eval _isfds_value := $$(shell echo $$$$(($(1) / $(BOARD_NAND_PAGE_SIZE) * \
($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE))))))\
$(if $(filter 0, $(_isfds_value)),$(shell echo $$(($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE)))),$(_isfds_value))\
$(eval _isfds_value :=))
endef
# $(1): The file(s) to check (often $@)
# $(2): The maximum total image size, in decimal bytes
# $(3): the type of filesystem "yaffs" or "raw"
#
# If $(2) is empty, evaluates to "true"
#
# Reserve bad blocks. Make sure that MAX(1% of partition size, 2 blocks)
# is left over after the image has been flashed. Round the 1% up to the
# next whole flash block size.
define assert-max-file-size
$(if $(2), \
size=$$(for i in $(1); do $(call get-file-size,$$i); echo +; done; echo 0); \
total=$$(( $$( echo "$$size" ) )); \
printname=$$(echo -n "$(1)" | tr " " +); \
img_blocksize=$(call image-size-from-data-size,$(BOARD_FLASH_BLOCK_SIZE)); \
if [ "$(3)" == "yaffs" ]; then \
reservedblocks=8; \
else \
reservedblocks=0; \
fi; \
twoblocks=$$((img_blocksize * 2)); \
onepct=$$((((($(2) / 100) - 1) / img_blocksize + 1) * img_blocksize)); \
reserve=$$(((twoblocks > onepct ? twoblocks : onepct) + \
reservedblocks * img_blocksize)); \
maxsize=$$(($(2) - reserve)); \
echo "$$printname maxsize=$$maxsize blocksize=$$img_blocksize total=$$total reserve=$$reserve"; \
if [ "$$total" -gt "$$maxsize" ]; then \
echo "error: $$printname too large ($$total > [$(2) - $$reserve])"; \
false; \
elif [ "$$total" -gt $$((maxsize - 32768)) ]; then \
echo "WARNING: $$printname approaching size limit ($$total now; limit $$maxsize)"; \
fi \
, \
true \
)
endef
# Like assert-max-file-size, but the second argument is a partition
# size, which we'll convert to a max image size before checking it
# against the files.
#
# $(1): The file(s) to check (often $@)
# $(2): The partition size.
define assert-max-image-size
$(if $(2), \
$(call assert-max-file-size,$(1),$(call image-size-from-data-size,$(2))), \
true)
endef
###########################################################
## Define device-specific radio files
###########################################################
INSTALLED_RADIOIMAGE_TARGET :=
# Copy a radio image file to the output location, and add it to
# INSTALLED_RADIOIMAGE_TARGET.
# $(1): filename
define add-radio-file
$(eval $(call add-radio-file-internal,$(1),$(notdir $(1))))
endef
define add-radio-file-internal
INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2)
$$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) | $$(ACP)
$$(transform-prebuilt-to-target)
endef
# Version of add-radio-file that also arranges for the version of the
# file to be checked against the contents of
# $(TARGET_BOARD_INFO_FILE).
# $(1): filename
# $(2): name of version variable in board-info (eg, "version-baseband")
define add-radio-file-checked
$(eval $(call add-radio-file-checked-internal,$(1),$(notdir $(1)),$(2)))
endef
define add-radio-file-checked-internal
INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2)
BOARD_INFO_CHECK += $(3):$(LOCAL_PATH)/$(1)
$$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) | $$(ACP)
$$(transform-prebuilt-to-target)
endef
###########################################################
# Override the package defined in $(1), setting the
# variables listed below differently.
#
# $(1): The makefile to override (relative to the source
# tree root)
# $(2): Old LOCAL_PACKAGE_NAME value.
# $(3): New LOCAL_PACKAGE_NAME value.
# $(4): New LOCAL_MANIFEST_PACKAGE_NAME value.
# $(5): New LOCAL_CERTIFICATE value.
# $(6): New LOCAL_INSTRUMENTATION_FOR value.
# $(7): New LOCAL_MANIFEST_INSTRUMENTATION_FOR value.
#
# Note that LOCAL_PACKAGE_OVERRIDES is NOT cleared in
# clear_vars.mk.
###########################################################
define inherit-package
$(eval $(call inherit-package-internal,$(1),$(2),$(3),$(4),$(5),$(6),$(7)))
endef
define inherit-package-internal
LOCAL_PACKAGE_OVERRIDES \
:= $(strip $(1))||$(strip $(2))||$(strip $(3))||$(strip $(4))||&&$(strip $(5))||&&$(strip $(6))||&&$(strip $(7)) $(LOCAL_PACKAGE_OVERRIDES)
include $(1)
LOCAL_PACKAGE_OVERRIDES \
:= $(wordlist 1,$(words $(LOCAL_PACKAGE_OVERRIDES)), $(LOCAL_PACKAGE_OVERRIDES))
endef
# To be used with inherit-package above
# Evalutes to true if the package was overridden
define set-inherited-package-variables
$(strip $(call set-inherited-package-variables-internal))
endef
define keep-or-override
$(eval $(1) := $(if $(2),$(2),$($(1))))
endef
define set-inherited-package-variables-internal
$(eval _o := $(subst ||, ,$(lastword $(LOCAL_PACKAGE_OVERRIDES))))
$(eval _n := $(subst ||, ,$(firstword $(LOCAL_PACKAGE_OVERRIDES))))
$(if $(filter $(word 2,$(_n)),$(LOCAL_PACKAGE_NAME)), \
$(eval LOCAL_PACKAGE_NAME := $(word 3,$(_o))) \
$(eval LOCAL_MANIFEST_PACKAGE_NAME := $(word 4,$(_o))) \
$(call keep-or-override,LOCAL_CERTIFICATE,$(patsubst &&%,%,$(word 5,$(_o)))) \
$(call keep-or-override,LOCAL_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 6,$(_o)))) \
$(call keep-or-override,LOCAL_MANIFEST_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 7,$(_o)))) \
$(eval LOCAL_OVERRIDES_PACKAGES := $(sort $(LOCAL_OVERRIDES_PACKAGES) $(word 2,$(_o)))) \
true \
,)
endef
###########################################################
## Expand a module name list with REQUIRED modules
###########################################################
# $(1): The variable name that holds the initial module name list.
# the variable will be modified to hold the expanded results.
# $(2): The initial module name list.
# Returns empty string (maybe with some whitespaces).
define expand-required-modules
$(eval _erm_new_modules := $(sort $(filter-out $($(1)),\
$(foreach m,$(2),$(ALL_MODULES.$(m).REQUIRED)))))\
$(if $(_erm_new_modules),$(eval $(1) += $(_erm_new_modules))\
$(call expand-required-modules,$(1),$(_erm_new_modules)))
endef
###########################################################
## API Check
###########################################################
# eval this to define a rule that runs apicheck.
#
# Args:
# $(1) target
# $(2) stable api file
# $(3) api file to be tested
# $(4) arguments for apicheck
# $(5) command to run if apicheck failed
# $(6) target dependent on this api check
# $(7) additional dependencies
define check-api
$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp: $(2) $(3) $(APICHECK) $(7)
@echo "Checking API:" $(1)
$(hide) ( $(APICHECK_COMMAND) $(4) $(2) $(3) || ( $(5) ; exit 38 ) )
$(hide) mkdir -p $$(dir $$@)
$(hide) touch $$@
$(6): $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp
endef
## Whether to build from source if prebuilt alternative exists
###########################################################
# $(1): module name
# $(2): LOCAL_PATH
# Expands to empty string if not from source.
ifeq (true,$(ANDROID_BUILD_FROM_SOURCE))
define if-build-from-source
true
endef
else
define if-build-from-source
$(if $(filter $(ANDROID_NO_PREBUILT_MODULES),$(1))$(filter \
$(addsuffix %,$(ANDROID_NO_PREBUILT_PATHS)),$(2)),true)
endef
endif
# Include makefile $(1) if build from source for module $(2)
# $(1): the makefile to include
# $(2): module name
# $(3): LOCAL_PATH
define include-if-build-from-source
$(if $(call if-build-from-source,$(2),$(3)),$(eval include $(1)))
endef
###########################################################
## Other includes
###########################################################
# -----------------------------------------------------------------
# Rules and functions to help copy important files to DIST_DIR
# when requested.
include $(BUILD_SYSTEM)/distdir.mk
# Include any vendor specific definitions.mk file
-include $(TOPDIR)vendor/*/build/core/definitions.mk
# broken:
# $(foreach file,$^,$(if $(findstring,.a,$(suffix $file)),-l$(file),$(file)))
###########################################################
## Misc notes
###########################################################
#DEPDIR = .deps
#df = $(DEPDIR)/$(*F)
#SRCS = foo.c bar.c ...
#%.o : %.c
# @$(MAKEDEPEND); \
# cp $(df).d $(df).P; \
# sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
# -e '/^$$/ d' -e 's/$$/ :/' < $(df).d >> $(df).P; \
# rm -f $(df).d
# $(COMPILE.c) -o $@ $<
#-include $(SRCS:%.c=$(DEPDIR)/%.P)
#%.o : %.c
# $(COMPILE.c) -MD -o $@ $<
# @cp $*.d $*.P; \
# sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
# -e '/^$$/ d' -e 's/$$/ :/' < $*.d >> $*.P; \
# rm -f $*.d