| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # If you don't need to do a full clean build but would like to touch |
| # a file or delete some intermediate files, add a clean step to the end |
| # of the list. These steps will only be run once, if they haven't been |
| # run before. |
| # |
| # E.g.: |
| # $(call add-clean-step, touch -c external/sqlite/sqlite3.h) |
| # $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates) |
| # |
| # Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with |
| # files that are missing or have been moved. |
| # |
| # Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory. |
| # Use $(OUT_DIR) to refer to the "out" directory. |
| # |
| # If you need to re-do something that's already mentioned, just copy |
| # the command and add it to the bottom of the list. E.g., if a change |
| # that you made last week required touching a file and a change you |
| # made today requires touching the same file, just copy the old |
| # touch step and add it to the end of the list. |
| # |
| # ************************************************ |
| # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST |
| # ************************************************ |
| |
| # For example: |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates) |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates) |
| #$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f) |
| #$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*) |
| |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmediaplayerservice_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmedia_jni_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt) |
| $(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" | xargs rm) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/*/LINKED) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/iself) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/lsd) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/apriori) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/isprelinked) |
| $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/soslim) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/YouTube*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/librtp_jni_intermediates) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/JAVA_LIBRARIES/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates) |
| |
| # ICS MR2!!!!!!!!!!!! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates) |
| |
| # WAIT, I MEAN JELLY BEAN!!!!!!!!!!!! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Changing where ro.carrier value is instantiated for system/build.prop |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Now we switched to build against Mac OS X SDK 10.6 |
| $(call add-clean-step, rm -rf $(OUT_DIR)/host/darwin-x86/obj) |
| |
| $(call add-clean-step, rm -f $(OUT_DIR)/versions_checked.mk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| # JB MR2!!!!!!! AND *NO*, THIS WILL NOT BE K-WHATEVER. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Start of "K" development! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # GCC 4.7 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| # Wait, back to some JB development! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # And on to KLP... |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # KLP now based off API 18. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Clean up around the /system/app -> /system/priv-app migration |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| |
| # Clean up old location of generated Java files from aidl |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/framework_intermediates/src) |
| |
| # Clean up ApplicationsProvider which is being removed. |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/ApplicationsProvider_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/ApplicationsProvider.apk) |
| |
| # Clean up Moto OMA DM client which isn't ready yet. |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.dev_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.diagmon_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.pluginhelper_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.service.api_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/DMService_intermediates) |
| $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/SprintDM_intermediates) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/DMService.apk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/SprintDM.apk) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/omadm) |
| |
| # GCC 4.8 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o) |
| |
| # KLP I mean KitKat now API 19. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # 4.4.1 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # 4.4.2 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # "L" and beyond. |
| # Make libart the default runtime |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Rename persist.sys.dalvik.vm.lib to allow new default |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # KKWT development |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # L development |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # L development |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # Add ro.product.cpu.abilist{32,64} to build.prop. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Adding dalvik.vm.dex2oat-flags to eng builds |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Switching the x86 emulator over to a 64 bit primary zygote. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| |
| # Rename persist.sys.dalvik.vm.lib.1 to allow new default |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Switching PRODUCT_RUNTIMES default for some devices |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # Switching to 32-bit-by-default host multilib build |
| $(call add-clean-step, rm -rf $(HOST_OUT_INTERMEDIATES)) |
| |
| # KKWT has become API 20 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # ims-common.jar added to BOOTCLASSPATH |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/ETC/init.environ.rc_intermediates) |
| |
| # Change ro.zygote for core_64_bit.mk from zygote32_64 to zygote64_32 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # Adding dalvik.vm.dex2oat-Xms, dalvik.vm.dex2oat-Xmx |
| # dalvik.vm.image-dex2oat-Xms, and dalvik.vm.image-dex2oat-Xmx |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system) |
| |
| # Adding dalvik.vm.dex2oat-filter |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop) |
| |
| # API 21? |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # API 21! |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*) |
| |
| # 5.0.1 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # 5.0.2 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop) |
| |
| # ************************************************ |
| # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST |
| # ************************************************ |
