blob: d8d304415e8e9a2e7b515f91463f1f59fafac1f9 [file] [log] [blame]
# Put some miscellaneous rules here
# HACK: clear LOCAL_PATH from including last build target before calling
# intermedites-dir-for
LOCAL_PATH := $(BUILD_SYSTEM)
# Pick a reasonable string to use to identify files.
ifneq "" "$(filter eng.%,$(BUILD_NUMBER))"
# BUILD_NUMBER has a timestamp in it, which means that
# it will change every time. Pick a stable value.
FILE_NAME_TAG := eng.$(USER)
else
FILE_NAME_TAG := $(BUILD_NUMBER)
endif
# -----------------------------------------------------------------
# Define rules to copy PRODUCT_COPY_FILES defined by the product.
# PRODUCT_COPY_FILES contains words like <source file>:<dest file>[:<owner>].
# <dest file> is relative to $(PRODUCT_OUT), so it should look like,
# e.g., "system/etc/file.xml".
# The filter part means "only eval the copy-one-file rule if this
# src:dest pair is the first one to match the same dest"
#$(1): the src:dest pair
define check-product-copy-files
$(if $(filter %.apk, $(call word-colon, 2, $(1))),$(error \
Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!))
endef
# filter out the duplicate <source file>:<dest file> pairs.
unique_product_copy_files_pairs :=
$(foreach cf,$(PRODUCT_COPY_FILES), \
$(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\
$(eval unique_product_copy_files_pairs += $(cf))))
unique_product_copy_files_destinations :=
$(foreach cf,$(unique_product_copy_files_pairs), \
$(eval _src := $(call word-colon,1,$(cf))) \
$(eval _dest := $(call word-colon,2,$(cf))) \
$(call check-product-copy-files,$(cf)) \
$(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \
$(info PRODUCT_COPY_FILES $(cf) ignored.), \
$(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \
$(if $(filter %.xml,$(_dest)),\
$(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\
$(eval $(call copy-one-file,$(_src),$(_fulldest)))) \
$(eval ALL_DEFAULT_INSTALLED_MODULES += $(_fulldest)) \
$(eval unique_product_copy_files_destinations += $(_dest))))
unique_product_copy_files_pairs :=
unique_product_copy_files_destinations :=
# -----------------------------------------------------------------
# docs/index.html
ifeq (,$(TARGET_BUILD_APPS))
gen := $(OUT_DOCS)/index.html
ALL_DOCS += $(gen)
$(gen): frameworks/base/docs/docs-redirect-index.html
@mkdir -p $(dir $@)
@cp -f $< $@
endif
# -----------------------------------------------------------------
# default.prop
INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_ROOT_OUT)/default.prop
ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_TARGET)
ADDITIONAL_DEFAULT_PROPERTIES := \
$(call collapse-pairs, $(ADDITIONAL_DEFAULT_PROPERTIES))
ADDITIONAL_DEFAULT_PROPERTIES += \
$(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES))
ADDITIONAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \
$(ADDITIONAL_DEFAULT_PROPERTIES),=)
$(INSTALLED_DEFAULT_PROP_TARGET):
@echo Target buildinfo: $@
@mkdir -p $(dir $@)
$(hide) echo "#" > $@; \
echo "# ADDITIONAL_DEFAULT_PROPERTIES" >> $@; \
echo "#" >> $@;
$(hide) $(foreach line,$(ADDITIONAL_DEFAULT_PROPERTIES), \
echo "$(line)" >> $@;)
build/tools/post_process_props.py $@
# -----------------------------------------------------------------
# build.prop
INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop
ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET)
ADDITIONAL_BUILD_PROPERTIES := \
$(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))
ADDITIONAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
$(ADDITIONAL_BUILD_PROPERTIES),=)
# A list of arbitrary tags describing the build configuration.
# Force ":=" so we can use +=
BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS)
ifeq ($(TARGET_BUILD_TYPE),debug)
BUILD_VERSION_TAGS += debug
endif
# The "test-keys" tag marks builds signed with the old test keys,
# which are available in the SDK. "dev-keys" marks builds signed with
# non-default dev keys (usually private keys from a vendor directory).
# Both of these tags will be removed and replaced with "release-keys"
# when the target-files is signed in a post-build step.
ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/target/product/security/testkey)
BUILD_KEYS := test-keys
else
BUILD_KEYS := dev-keys
endif
BUILD_VERSION_TAGS += $(BUILD_KEYS)
BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS)))
# A human-readable string that descibes this build in detail.
build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER) $(BUILD_VERSION_TAGS)
$(INSTALLED_BUILD_PROP_TARGET): PRIVATE_BUILD_DESC := $(build_desc)
# The string used to uniquely identify the combined build and product; used by the OTA server.
ifeq (,$(strip $(BUILD_FINGERPRINT)))
ifneq ($(filter eng.%,$(BUILD_NUMBER)),)
# Trim down BUILD_FINGERPRINT: the default BUILD_NUMBER makes it easily exceed
# the Android system property length limit (PROPERTY_VALUE_MAX=92).
BF_BUILD_NUMBER := $(USER)$(shell date +%m%d%H%M)
else
BF_BUILD_NUMBER := $(BUILD_NUMBER)
endif
BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BF_BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS)
endif
ifneq ($(words $(BUILD_FINGERPRINT)),1)
$(error BUILD_FINGERPRINT cannot contain spaces: "$(BUILD_FINGERPRINT)")
endif
# The string used to uniquely identify the system build; used by the OTA server.
# This purposefully excludes any product-specific variables.
ifeq (,$(strip $(BUILD_THUMBPRINT)))
BUILD_THUMBPRINT := $(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS)
endif
ifneq ($(words $(BUILD_THUMBPRINT)),1)
$(error BUILD_THUMBPRINT cannot contain spaces: "$(BUILD_THUMBPRINT)")
endif
KNOWN_OEM_THUMBPRINT_PROPERTIES := \
ro.product.brand \
ro.product.name \
ro.product.device
OEM_THUMBPRINT_PROPERTIES := $(filter $(KNOWN_OEM_THUMBPRINT_PROPERTIES),\
$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES))
# Display parameters shown under Settings -> About Phone
ifeq ($(TARGET_BUILD_VARIANT),user)
# User builds should show:
# release build number or branch.buld_number non-release builds
# Dev. branches should have DISPLAY_BUILD_NUMBER set
ifeq "true" "$(DISPLAY_BUILD_NUMBER)"
BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER) $(BUILD_KEYS)
else
BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS)
endif
else
# Non-user builds should show detailed build information
BUILD_DISPLAY_ID := $(build_desc)
endif
# Whether there is default locale set in PRODUCT_PROPERTY_OVERRIDES
product_property_override_locale_language := $(strip \
$(patsubst ro.product.locale.language=%,%,\
$(filter ro.product.locale.language=%,$(PRODUCT_PROPERTY_OVERRIDES))))
product_property_overrides_locale_region := $(strip \
$(patsubst ro.product.locale.region=%,%,\
$(filter ro.product.locale.region=%,$(PRODUCT_PROPERTY_OVERRIDES))))
# Selects the first locale in the list given as the argument,
# and splits it into language and region, which each may be
# empty.
define default-locale
$(subst _, , $(firstword $(1)))
endef
# Selects the first locale in the list given as the argument
# and returns the language (or the region), if it's not set in PRODUCT_PROPERTY_OVERRIDES;
# Return empty string if it's already set in PRODUCT_PROPERTY_OVERRIDES.
define default-locale-language
$(if $(product_property_override_locale_language),,$(word 1, $(call default-locale, $(1))))
endef
define default-locale-region
$(if $(product_property_overrides_locale_region),,$(word 2, $(call default-locale, $(1))))
endef
BUILDINFO_SH := build/tools/buildinfo.sh
ifdef TARGET_SYSTEM_PROP
system_prop_file := $(TARGET_SYSTEM_PROP)
else
system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
endif
$(INSTALLED_BUILD_PROP_TARGET): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file)
@echo Target buildinfo: $@
@mkdir -p $(dir $@)
$(hide) echo > $@
ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES),)
$(hide) echo "#" >> $@; \
echo "# PRODUCT_OEM_PROPERTIES" >> $@; \
echo "#" >> $@;
$(hide) $(foreach prop,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES), \
echo "import /oem/oem.prop $(prop)" >> $@;)
endif
$(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
TARGET_DEVICE="$(TARGET_DEVICE)" \
PRODUCT_NAME="$(TARGET_PRODUCT)" \
PRODUCT_BRAND="$(PRODUCT_BRAND)" \
PRODUCT_DEFAULT_LANGUAGE="$(call default-locale-language,$(PRODUCT_LOCALES))" \
PRODUCT_DEFAULT_REGION="$(call default-locale-region,$(PRODUCT_LOCALES))" \
PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \
PRODUCT_MODEL="$(PRODUCT_MODEL)" \
PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \
BUILD_ID="$(BUILD_ID)" \
BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \
BUILD_NUMBER="$(BUILD_NUMBER)" \
PLATFORM_VERSION="$(PLATFORM_VERSION)" \
PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \
PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \
BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
TARGET_BOOTLOADER_BOARD_NAME="$(TARGET_BOOTLOADER_BOARD_NAME)" \
BUILD_FINGERPRINT="$(BUILD_FINGERPRINT)" \
$(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT)") \
TARGET_BOARD_PLATFORM="$(TARGET_BOARD_PLATFORM)" \
TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \
TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \
TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \
TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \
TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \
TARGET_AAPT_CHARACTERISTICS="$(TARGET_AAPT_CHARACTERISTICS)" \
bash $(BUILDINFO_SH) >> $@
$(hide) $(foreach file,$(system_prop_file), \
if [ -f "$(file)" ]; then \
echo "#" >> $@; \
echo Target buildinfo from: "$(file)"; \
echo "# from $(file)" >> $@; \
echo "#" >> $@; \
cat $(file) >> $@; \
fi;)
$(if $(ADDITIONAL_BUILD_PROPERTIES), \
$(hide) echo >> $@; \
echo "#" >> $@; \
echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \
echo "#" >> $@; )
$(hide) $(foreach line,$(ADDITIONAL_BUILD_PROPERTIES), \
echo "$(line)" >> $@;)
$(hide) build/tools/post_process_props.py $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_PROPERTY_BLACKLIST)
build_desc :=
# -----------------------------------------------------------------
# vendor build.prop
#
# For verifying that the vendor build is what we thing it is
ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
INSTALLED_VENDOR_BUILD_PROP_TARGET := $(TARGET_OUT_VENDOR)/build.prop
ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_BUILD_PROP_TARGET)
$(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET)
@echo Target vendor buildinfo: $@
@mkdir -p $(dir $@)
$(hide) echo > $@
$(hide) echo ro.vendor.build.date=`date`>>$@
$(hide) echo ro.vendor.build.date.utc=`date +%s`>>$@
$(hide) echo ro.vendor.build.fingerprint="$(BUILD_FINGERPRINT)">>$@
endif
# -----------------------------------------------------------------
# sdk-build.prop
#
# There are certain things in build.prop that we don't want to
# ship with the sdk; remove them.
# This must be a list of entire property keys followed by
# "=" characters, without any internal spaces.
sdk_build_prop_remove := \
ro.build.user= \
ro.build.host= \
ro.product.brand= \
ro.product.manufacturer= \
ro.product.device=
# TODO: Remove this soon-to-be obsolete property
sdk_build_prop_remove += ro.build.product=
INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop
$(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET)
@echo SDK buildinfo: $@
@mkdir -p $(dir $@)
$(hide) grep -v "$(subst $(space),\|,$(strip \
$(sdk_build_prop_remove)))" $< > $@.tmp
$(hide) for x in $(sdk_build_prop_remove); do \
echo "$$x"generic >> $@.tmp; done
$(hide) mv $@.tmp $@
# -----------------------------------------------------------------
# package stats
PACKAGE_STATS_FILE := $(PRODUCT_OUT)/package-stats.txt
PACKAGES_TO_STAT := \
$(sort $(filter $(TARGET_OUT)/% $(TARGET_OUT_DATA)/%, \
$(filter %.jar %.apk, $(ALL_DEFAULT_INSTALLED_MODULES))))
$(PACKAGE_STATS_FILE): $(PACKAGES_TO_STAT)
@echo Package stats: $@
@mkdir -p $(dir $@)
$(hide) rm -f $@
$(hide) build/tools/dump-package-stats $^ > $@
.PHONY: package-stats
package-stats: $(PACKAGE_STATS_FILE)
# -----------------------------------------------------------------
# Cert-to-package mapping. Used by the post-build signing tools.
# Use a macro to add newline to each echo command
define _apkcerts_echo_with_newline
$(hide) echo $(1)
endef
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
name := $(name)_debug
endif
name := $(name)-apkcerts-$(FILE_NAME_TAG)
intermediates := \
$(call intermediates-dir-for,PACKAGING,apkcerts)
APKCERTS_FILE := $(intermediates)/$(name).txt
# We don't need to really build all the modules.
# TODO: rebuild APKCERTS_FILE if any app change its cert.
$(APKCERTS_FILE):
@echo APK certs list: $@
@mkdir -p $(dir $@)
@rm -f $@
$(foreach p,$(PACKAGES),\
$(if $(PACKAGES.$(p).EXTERNAL_KEY),\
$(call _apkcerts_echo_with_newline,\
'name="$(p).apk" certificate="EXTERNAL" \
private_key=""' >> $@),\
$(call _apkcerts_echo_with_newline,\
'name="$(p).apk" certificate="$(PACKAGES.$(p).CERTIFICATE)" \
private_key="$(PACKAGES.$(p).PRIVATE_KEY)"' >> $@)))
# In case value of PACKAGES is empty.
$(hide) touch $@
.PHONY: apkcerts-list
apkcerts-list: $(APKCERTS_FILE)
ifneq (,$(TARGET_BUILD_APPS))
$(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt)
endif
# -----------------------------------------------------------------
# module info file
ifdef CREATE_MODULE_INFO_FILE
MODULE_INFO_FILE := $(PRODUCT_OUT)/module-info.txt
$(info Generating $(MODULE_INFO_FILE)...)
$(shell rm -f $(MODULE_INFO_FILE))
$(foreach m,$(ALL_MODULES), \
$(shell echo "NAME=\"$(m)\"" \
"PATH=\"$(strip $(ALL_MODULES.$(m).PATH))\"" \
"TAGS=\"$(strip $(filter-out _%,$(ALL_MODULES.$(m).TAGS)))\"" \
"BUILT=\"$(strip $(ALL_MODULES.$(m).BUILT))\"" \
"INSTALLED=\"$(strip $(ALL_MODULES.$(m).INSTALLED))\"" >> $(MODULE_INFO_FILE)))
endif
# -----------------------------------------------------------------
# The dev key is used to sign this package, and as the key required
# for future OTA packages installed by this system. Actual product
# deliverables will be re-signed by hand. We expect this file to
# exist with the suffixes ".x509.pem" and ".pk8".
DEFAULT_KEY_CERT_PAIR := $(DEFAULT_SYSTEM_DEV_CERTIFICATE)
# Rules that need to be present for the all targets, even
# if they don't do anything.
.PHONY: systemimage
systemimage:
# -----------------------------------------------------------------
.PHONY: event-log-tags
# Produce an event logs tag file for everything we know about, in order
# to properly allocate numbers. Then produce a file that's filtered
# for what's going to be installed.
all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt
event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags
# Include tags from all packages that we know about
all_event_log_tags_src := \
$(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS)))
# PDK builds will already have a full list of tags that needs to get merged
# in with the ones from source
pdk_fusion_log_tags_file := $(patsubst $(PRODUCT_OUT)/%,$(_pdk_fusion_intermediates)/%,$(filter $(event_log_tags_file),$(ALL_PDK_FUSION_FILES)))
$(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) $(pdk_fusion_log_tags_file)
$(all_event_log_tags_file): $(all_event_log_tags_src) $(pdk_fusion_log_tags_file)
$(hide) mkdir -p $(dir $@)
$(hide) build/tools/merge-event-log-tags.py -o $@ $(PRIVATE_SRC_FILES)
# Include tags from all packages included in this product, plus all
# tags that are part of the system (ie, not in a vendor/ or device/
# directory).
event_log_tags_src := \
$(sort $(foreach m,\
$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES) \
$(call module-names-for-tag-list,user), \
$(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \
$(filter-out vendor/% device/% out/%,$(all_event_log_tags_src)))
$(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) $(pdk_fusion_log_tags_file)
$(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file)
$(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(pdk_fusion_log_tags_file)
$(hide) mkdir -p $(dir $@)
$(hide) build/tools/merge-event-log-tags.py -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES)
event-log-tags: $(event_log_tags_file)
ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file)
# #################################################################
# Targets for boot/OS images
# #################################################################
ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true)
INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader
ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true)
INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader
else
INSTALLED_2NDBOOTLOADER_TARGET :=
endif
else
INSTALLED_BOOTLOADER_MODULE :=
INSTALLED_2NDBOOTLOADER_TARGET :=
endif # TARGET_NO_BOOTLOADER
ifneq ($(strip $(TARGET_NO_KERNEL)),true)
INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel
else
INSTALLED_KERNEL_TARGET :=
endif
# -----------------------------------------------------------------
# the ramdisk
INTERNAL_RAMDISK_FILES := $(filter $(TARGET_ROOT_OUT)/%, \
$(ALL_PREBUILT) \
$(ALL_COPIED_HEADERS) \
$(ALL_GENERATED_SOURCES) \
$(ALL_DEFAULT_INSTALLED_MODULES))
BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img
# We just build this directly to the install location.
INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET)
$(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) | $(MINIGZIP)
$(call pretty,"Target ram disk: $@")
$(hide) $(MKBOOTFS) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $@
.PHONY: ramdisk-nodeps
ramdisk-nodeps: $(MKBOOTFS) | $(MINIGZIP)
@echo "make $@: ignoring dependencies"
$(hide) $(MKBOOTFS) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET)
ifneq ($(strip $(TARGET_NO_KERNEL)),true)
# -----------------------------------------------------------------
# the boot image, which is a collection of other images.
INTERNAL_BOOTIMAGE_ARGS := \
$(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \
--kernel $(INSTALLED_KERNEL_TARGET) \
--ramdisk $(INSTALLED_RAMDISK_TARGET)
INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS))
BOARD_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE))
ifdef BOARD_KERNEL_CMDLINE
INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(BOARD_KERNEL_CMDLINE)"
endif
BOARD_KERNEL_BASE := $(strip $(BOARD_KERNEL_BASE))
ifdef BOARD_KERNEL_BASE
INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE)
endif
BOARD_KERNEL_PAGESIZE := $(strip $(BOARD_KERNEL_PAGESIZE))
ifdef BOARD_KERNEL_PAGESIZE
INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE)
endif
INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img
ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true)
tmp_dir_for_image := $(call intermediates-dir-for,EXECUTABLES,boot_img)/bootimg
INTERNAL_BOOTIMAGE_ARGS += --tmpdir $(tmp_dir_for_image)
INTERNAL_BOOTIMAGE_ARGS += --genext2fs $(MKEXT2IMG)
$(INSTALLED_BOOTIMAGE_TARGET): $(MKEXT2IMG) $(INTERNAL_BOOTIMAGE_FILES)
$(call pretty,"Target boot image: $@")
$(hide) $(MKEXT2BOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output $@
.PHONY: bootimage-nodeps
bootimage-nodeps: $(MKEXT2IMG)
@echo "make $@: ignoring dependencies"
$(hide) $(MKEXT2BOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET)
else ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)) # TARGET_BOOTIMAGE_USE_EXT2 != true
$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOT_SIGNER)
$(call pretty,"Target boot image: $@")
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@
$(BOOT_SIGNER) /boot $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY) $@
$(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE))
.PHONY: bootimage-nodeps
bootimage-nodeps: $(MKBOOTIMG) $(BOOT_SIGNER)
@echo "make $@: ignoring dependencies"
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET)
$(BOOT_SIGNER) /boot $(INSTALLED_BOOTIMAGE_TARGET) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY) $(INSTALLED_BOOTIMAGE_TARGET)
$(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE))
else # PRODUCT_SUPPORTS_VERITY != true
$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES)
$(call pretty,"Target boot image: $@")
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@
$(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE))
.PHONY: bootimage-nodeps
bootimage-nodeps: $(MKBOOTIMG)
@echo "make $@: ignoring dependencies"
$(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET)
$(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE))
endif # TARGET_BOOTIMAGE_USE_EXT2
else # TARGET_NO_KERNEL
# HACK: The top-level targets depend on the bootimage. Not all targets
# can produce a bootimage, though, and emulator targets need the ramdisk
# instead. Fake it out by calling the ramdisk the bootimage.
# TODO: make the emulator use bootimages, and make mkbootimg accept
# kernel-less inputs.
INSTALLED_BOOTIMAGE_TARGET := $(INSTALLED_RAMDISK_TARGET)
endif
# -----------------------------------------------------------------
# NOTICE files
#
# We are required to publish the licenses for all code under BSD, GPL and
# Apache licenses (and possibly other more exotic ones as well). We err on the
# side of caution, so the licenses for other third-party code are included here
# too.
#
# This needs to be before the systemimage rules, because it adds to
# ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files
# go into the systemimage.
.PHONY: notice_files
# Create the rule to combine the files into text and html forms
# $(1) - Plain text output file
# $(2) - HTML output file
# $(3) - File title
# $(4) - Directory to use. Notice files are all $(4)/src. Other
# directories in there will be used for scratch
# $(5) - Dependencies for the output files
#
# The algorithm here is that we go collect a hash for each of the notice
# files and write the names of the files that match that hash. Then
# to generate the real files, we go print out all of the files and their
# hashes.
#
# These rules are fairly complex, so they depend on this makefile so if
# it changes, they'll run again.
#
# TODO: We could clean this up so that we just record the locations of the
# original notice files instead of making rules to copy them somwehere.
# Then we could traverse that without quite as much bash drama.
define combine-notice-files
$(1) $(2): PRIVATE_MESSAGE := $(3)
$(1) $(2): PRIVATE_DIR := $(4)
$(1) : $(2)
$(2) : $(5) $(BUILD_SYSTEM)/Makefile build/tools/generate-notice-files.py
build/tools/generate-notice-files.py $(1) $(2) $$(PRIVATE_MESSAGE) $$(PRIVATE_DIR)/src
notice_files: $(1) $(2)
endef
# TODO These intermediate NOTICE.txt/NOTICE.html files should go into
# TARGET_OUT_NOTICE_FILES now that the notice files are gathered from
# the src subdirectory.
target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt
target_notice_file_html := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html
target_notice_file_html_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz
tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt
tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html
ifndef TARGET_BUILD_APPS
kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt
pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES))
$(eval $(call combine-notice-files, \
$(target_notice_file_txt), \
$(target_notice_file_html), \
"Notices for files contained in the filesystem images in this directory:", \
$(TARGET_OUT_NOTICE_FILES), \
$(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files)))
$(eval $(call combine-notice-files, \
$(tools_notice_file_txt), \
$(tools_notice_file_html), \
"Notices for files contained in the tools directory:", \
$(HOST_OUT_NOTICE_FILES), \
$(ALL_DEFAULT_INSTALLED_MODULES)))
# Install the html file at /system/etc/NOTICE.html.gz.
# This is not ideal, but this is very late in the game, after a lot of
# the module processing has already been done -- in fact, we used the
# fact that all that has been done to get the list of modules that we
# need notice files for.
$(target_notice_file_html_gz): $(target_notice_file_html) | $(MINIGZIP)
$(hide) $(MINIGZIP) -9 < $< > $@
installed_notice_html_gz := $(TARGET_OUT)/etc/NOTICE.html.gz
$(installed_notice_html_gz): $(target_notice_file_html_gz) | $(ACP)
$(copy-file-to-target)
# if we've been run my mm, mmm, etc, don't reinstall this every time
ifeq ($(ONE_SHOT_MAKEFILE),)
ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_gz)
endif
endif # TARGET_BUILD_APPS
# The kernel isn't really a module, so to get its module file in there, we
# make the target NOTICE files depend on this particular file too, which will
# then be in the right directory for the find in combine-notice-files to work.
$(kernel_notice_file): \
prebuilts/qemu-kernel/arm/LINUX_KERNEL_COPYING \
| $(ACP)
@echo Copying: $@
$(hide) mkdir -p $(dir $@)
$(hide) $(ACP) $< $@
# -----------------------------------------------------------------
# Build a keystore with the authorized keys in it, used to verify the
# authenticity of downloaded OTA packages.
#
# This rule adds to ALL_DEFAULT_INSTALLED_MODULES, so it needs to come
# before the rules that use that variable to build the image.
ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/security/otacerts.zip
$(TARGET_OUT_ETC)/security/otacerts.zip: KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
$(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR))
$(hide) rm -f $@
$(hide) mkdir -p $(dir $@)
$(hide) zip -qj $@ $<
.PHONY: otacerts
otacerts: $(TARGET_OUT_ETC)/security/otacerts.zip
# #################################################################
# Targets for user images
# #################################################################
INTERNAL_USERIMAGES_EXT_VARIANT :=
ifeq ($(TARGET_USERIMAGES_USE_EXT2),true)
INTERNAL_USERIMAGES_USE_EXT := true
INTERNAL_USERIMAGES_EXT_VARIANT := ext2
else
ifeq ($(TARGET_USERIMAGES_USE_EXT3),true)
INTERNAL_USERIMAGES_USE_EXT := true
INTERNAL_USERIMAGES_EXT_VARIANT := ext3
else
ifeq ($(TARGET_USERIMAGES_USE_EXT4),true)
INTERNAL_USERIMAGES_USE_EXT := true
INTERNAL_USERIMAGES_EXT_VARIANT := ext4
endif
endif
endif
# These options tell the recovery updater/installer how to mount the partitions writebale.
# <fstype>=<fstype_opts>[|<fstype_opts>]...
# fstype_opts := <opt>[,<opt>]...
# opt := <name>[=<value>]
# The following worked on Nexus devices with Kernel 3.1, 3.4, 3.10
DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS := ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED))
INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s
endif
ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true)
INTERNAL_USERIMAGES_DEPS := $(SIMG2IMG)
INTERNAL_USERIMAGES_DEPS += $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(E2FSCK)
ifeq ($(TARGET_USERIMAGES_USE_F2FS),true)
INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) $(MAKE_F2FS)
endif
else
INTERNAL_USERIMAGES_DEPS := $(MKYAFFS2)
endif
INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))
ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY))
INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER)
endif
SELINUX_FC := $(TARGET_ROOT_OUT)/file_contexts
INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC)
# $(1): the path of the output dictionary file
# $(2): additional "key=value" pairs to append to the dictionary file.
define generate-userimage-prop-dictionary
$(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1))
$(if $(mkyaffs2_extra_flags),$(hide) echo "mkyaffs2_extra_flags=$(mkyaffs2_extra_flags)" >> $(1))
$(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1)
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(VERITY_SIGNER)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1))
$(if $(2),$(hide) $(foreach kv,$(2),echo "$(kv)" >> $(1);))
endef
# -----------------------------------------------------------------
# Recovery image
# If neither TARGET_NO_KERNEL nor TARGET_NO_RECOVERY are true
ifeq (,$(filter true, $(TARGET_NO_KERNEL) $(TARGET_NO_RECOVERY)))
INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img
recovery_initrc := $(call include-path-for, recovery)/etc/init.rc
recovery_sepolicy := $(call intermediates-dir-for,ETC,sepolicy.recovery)/sepolicy.recovery
recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery system
recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img
recovery_build_prop := $(INSTALLED_BUILD_PROP_TARGET)
recovery_binary := $(call intermediates-dir-for,EXECUTABLES,recovery)/recovery
recovery_resources_common := $(call include-path-for, recovery)/res
# Set recovery_density to the density bucket of the device.
recovery_density := unknown
ifneq (,$(PRODUCT_AAPT_PREF_CONFIG))
# If PRODUCT_AAPT_PREF_CONFIG includes a dpi bucket, then use that value.
recovery_density := $(filter %dpi,$(PRODUCT_AAPT_PREF_CONFIG))
else
# Otherwise, use the highest density that appears in PRODUCT_AAPT_CONFIG.
# Order is important here; we'll take the first one that's found.
recovery_densities := $(filter $(PRODUCT_AAPT_CONFIG_SP),xxxhdpi xxhdpi xhdpi hdpi tvdpi mdpi ldpi)
ifneq (,$(recovery_densities))
recovery_density := $(word 1,$(recovery_densities))
endif
endif
ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density)))
recovery_resources_common := $(recovery_resources_common)-$(recovery_density)
else
recovery_resources_common := $(recovery_resources_common)-xhdpi
endif
# Select the 18x32 font on high-density devices (xhdpi and up); and
# the 12x22 font on other devices. Note that the font selected here
# can be overridden for a particular device by putting a font.png in
# its private recovery resources.
ifneq (,$(filter xxxhdpi xxhdpi xhdpi,$(recovery_density)))
recovery_font := $(call include-path-for, recovery)/fonts/18x32.png
else
recovery_font := $(call include-path-for, recovery)/fonts/12x22.png
endif
recovery_resources_private := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery/res))
recovery_resource_deps := $(shell find $(recovery_resources_common) \
$(recovery_resources_private) -type f)
ifdef TARGET_RECOVERY_FSTAB
recovery_fstab := $(TARGET_RECOVERY_FSTAB)
else
recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab))
endif
# Named '.dat' so we don't attempt to use imgdiff for patching it.
RECOVERY_RESOURCE_ZIP := $(TARGET_OUT)/etc/recovery-resource.dat
ifeq ($(recovery_resources_private),)
$(info No private recovery resources for TARGET_DEVICE $(TARGET_DEVICE))
endif
ifeq ($(recovery_fstab),)
$(info No recovery.fstab for TARGET_DEVICE $(TARGET_DEVICE))
endif
INTERNAL_RECOVERYIMAGE_ARGS := \
$(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \
--kernel $(recovery_kernel) \
--ramdisk $(recovery_ramdisk)
# Assumes this has already been stripped
ifdef BOARD_KERNEL_CMDLINE
INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(BOARD_KERNEL_CMDLINE)"
endif
ifdef BOARD_KERNEL_BASE
INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE)
endif
BOARD_KERNEL_PAGESIZE := $(strip $(BOARD_KERNEL_PAGESIZE))
ifdef BOARD_KERNEL_PAGESIZE
INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE)
endif
# Keys authorized to sign OTA packages this build will accept. The
# build always uses dev-keys for this; release packaging tools will
# substitute other keys for this one.
OTA_PUBLIC_KEYS := $(DEFAULT_SYSTEM_DEV_CERTIFICATE).x509.pem
# Generate a file containing the keys that will be read by the
# recovery binary.
RECOVERY_INSTALL_OTA_KEYS := \
$(call intermediates-dir-for,PACKAGING,ota_keys)/keys
DUMPKEY_JAR := $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar
$(RECOVERY_INSTALL_OTA_KEYS): PRIVATE_OTA_PUBLIC_KEYS := $(OTA_PUBLIC_KEYS)
$(RECOVERY_INSTALL_OTA_KEYS): extra_keys := $(patsubst %,%.x509.pem,$(PRODUCT_EXTRA_RECOVERY_KEYS))
$(RECOVERY_INSTALL_OTA_KEYS): $(OTA_PUBLIC_KEYS) $(DUMPKEY_JAR) $(extra_keys)
@echo "DumpPublicKey: $@ <= $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys)"
@rm -rf $@
@mkdir -p $(dir $@)
java -jar $(DUMPKEY_JAR) $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys) > $@
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) \
$(INSTALLED_RAMDISK_TARGET) \
$(INSTALLED_BOOTIMAGE_TARGET) \
$(recovery_binary) \
$(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \
$(INSTALLED_2NDBOOTLOADER_TARGET) \
$(recovery_build_prop) $(recovery_resource_deps) \
$(recovery_fstab) \
$(RECOVERY_INSTALL_OTA_KEYS)
@echo ----- Making recovery image ------
$(hide) rm -rf $(TARGET_RECOVERY_OUT)
$(hide) mkdir -p $(TARGET_RECOVERY_OUT)
$(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/etc $(TARGET_RECOVERY_ROOT_OUT)/tmp
@echo Copying baseline ramdisk...
$(hide) cp -R $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT)
@echo Modifying ramdisk contents...
$(hide) rm -f $(TARGET_RECOVERY_ROOT_OUT)/init*.rc
$(hide) cp -f $(recovery_initrc) $(TARGET_RECOVERY_ROOT_OUT)/
$(hide) rm -f $(TARGET_RECOVERY_ROOT_OUT)/sepolicy
$(hide) cp -f $(recovery_sepolicy) $(TARGET_RECOVERY_ROOT_OUT)/sepolicy
$(hide) -cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/
$(hide) cp -f $(recovery_binary) $(TARGET_RECOVERY_ROOT_OUT)/sbin/
$(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res
$(hide) rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/*
$(hide) cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res
$(hide) cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png
$(hide) $(foreach item,$(recovery_resources_private), \
cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/)
$(hide) $(foreach item,$(recovery_fstab), \
cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab)
$(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys
$(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) $(recovery_build_prop) \
> $(TARGET_RECOVERY_ROOT_OUT)/default.prop
$(hide) $(MKBOOTFS) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) > $(recovery_ramdisk)
$(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@
ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY))
$(BOOT_SIGNER) /recovery $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY) $@
endif
$(hide) $(call assert-max-image-size,$@,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE))
@echo ----- Made recovery image: $@ --------
$(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET)
$(hide) mkdir -p $(dir $@)
$(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrj $@ -@
else
INSTALLED_RECOVERYIMAGE_TARGET :=
RECOVERY_RESOURCE_ZIP :=
endif
.PHONY: recoveryimage
recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP)
ifneq ($(BOARD_NAND_PAGE_SIZE),)
mkyaffs2_extra_flags := -c $(BOARD_NAND_PAGE_SIZE)
else
mkyaffs2_extra_flags :=
BOARD_NAND_PAGE_SIZE := 2048
endif
ifneq ($(BOARD_NAND_SPARE_SIZE),)
mkyaffs2_extra_flags += -s $(BOARD_NAND_SPARE_SIZE)
else
BOARD_NAND_SPARE_SIZE := 64
endif
# -----------------------------------------------------------------
# system image
#
# Remove overridden packages from $(ALL_PDK_FUSION_FILES)
PDK_FUSION_SYSIMG_FILES := \
$(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \
$(ALL_PDK_FUSION_FILES))
INTERNAL_SYSTEMIMAGE_FILES := $(filter $(TARGET_OUT)/%, \
$(ALL_PREBUILT) \
$(ALL_COPIED_HEADERS) \
$(ALL_GENERATED_SOURCES) \
$(ALL_DEFAULT_INSTALLED_MODULES) \
$(PDK_FUSION_SYSIMG_FILES) \
$(RECOVERY_RESOURCE_ZIP))
FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS)
# -----------------------------------------------------------------
# installed file list
# Depending on anything that $(BUILT_SYSTEMIMAGE) depends on.
# We put installed-files.txt ahead of image itself in the dependency graph
# so that we can get the size stat even if the build fails due to too large
# system image.
INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt
$(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS)
@echo Installed file list: $@
@mkdir -p $(dir $@)
@rm -f $@
$(hide) build/tools/fileslist.py $(TARGET_OUT) > $@
.PHONY: installed-file-list
installed-file-list: $(INSTALLED_FILES_FILE)
$(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE))
systemimage_intermediates := \
$(call intermediates-dir-for,PACKAGING,systemimage)
BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img
# Create symlink /system/vendor to /vendor if necessary.
ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
define create-system-vendor-symlink
$(hide) if [ -d $(TARGET_OUT)/vendor ] && [ ! -h $(TARGET_OUT)/vendor ]; then \
echo 'Non-symlink $(TARGET_OUT)/vendor detected!' 1>&2; \
echo 'You cannot install files to $(TARGET_OUT)/vendor while building a separate vendor.img!' 1>&2; \
exit 1; \
fi
$(hide) ln -sf /vendor $(TARGET_OUT)/vendor
endef
else
define create-system-vendor-symlink
endef
endif
# $(1): output file
define build-systemimage-target
@echo "Target system fs image: $(1)"
$(call create-system-vendor-symlink)
@mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt
$(call generate-userimage-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt, \
skip_fsck=true)
$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
./build/tools/releasetools/build_image.py \
$(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) \
|| ( echo "Out of space? the tree size of $(TARGET_OUT) is (MB): " 1>&2 ;\
du -sm $(TARGET_OUT) 1>&2;\
echo "The max is $$(( $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) / 1048576 )) MB." 1>&2 ;\
mkdir -p $(DIST_DIR); cp $(INSTALLED_FILES_FILE) $(DIST_DIR)/installed-files-rescued.txt; \
exit 1 )
endef
$(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE)
$(call build-systemimage-target,$@)
INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img
SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT)
# The system partition needs room for the recovery image as well. We
# now store the recovery image as a binary patch using the boot image
# as the source (since they are very similar). Generate the patch so
# we can see how big it's going to be, and include that in the system
# image size check calculation.
ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch)
RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p
$(RECOVERY_FROM_BOOT_PATCH): $(INSTALLED_RECOVERYIMAGE_TARGET) \
$(INSTALLED_BOOTIMAGE_TARGET) \
$(HOST_OUT_EXECUTABLES)/imgdiff \
$(HOST_OUT_EXECUTABLES)/bsdiff
@echo "Construct recovery from boot"
mkdir -p $(dir $@)
PATH=$(HOST_OUT_EXECUTABLES):$$PATH $(HOST_OUT_EXECUTABLES)/imgdiff $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_RECOVERYIMAGE_TARGET) $@
endif
$(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) | $(ACP)
@echo "Install system fs image: $@"
$(copy-file-to-target)
$(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
systemimage: $(INSTALLED_SYSTEMIMAGE)
.PHONY: systemimage-nodeps snod
systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \
| $(INTERNAL_USERIMAGES_DEPS)
@echo "make $@: ignoring dependencies"
$(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE))
$(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
ifneq (,$(filter systemimage-nodeps snod, $(MAKECMDGOALS)))
ifeq (true,$(WITH_DEXPREOPT))
$(warning Warning: with dexpreopt enabled, you may need a full rebuild.)
endif
endif
#######
## system tarball
define build-systemtarball-target
$(call pretty,"Target system fs tarball: $(INSTALLED_SYSTEMTARBALL_TARGET)")
$(call create-system-vendor-symlink)
$(MKTARBALL) $(FS_GET_STATS) \
$(PRODUCT_OUT) system $(PRIVATE_SYSTEM_TAR) \
$(INSTALLED_SYSTEMTARBALL_TARGET)
endef
ifndef SYSTEM_TARBALL_FORMAT
SYSTEM_TARBALL_FORMAT := bz2
endif
system_tar := $(PRODUCT_OUT)/system.tar
INSTALLED_SYSTEMTARBALL_TARGET := $(system_tar).$(SYSTEM_TARBALL_FORMAT)
$(INSTALLED_SYSTEMTARBALL_TARGET): PRIVATE_SYSTEM_TAR := $(system_tar)
$(INSTALLED_SYSTEMTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_SYSTEMIMAGE_FILES)
$(build-systemtarball-target)
.PHONY: systemtarball-nodeps
systemtarball-nodeps: $(FS_GET_STATS) \
$(filter-out systemtarball-nodeps stnod,$(MAKECMDGOALS))
$(build-systemtarball-target)
.PHONY: stnod
stnod: systemtarball-nodeps
#######
## platform.zip: system, plus other files to be used in PDK fusion build,
## in a zip file
##
## PDK_PLATFORM_ZIP_PRODUCT_BINARIES is used to store specified files to platform.zip.
## The variable will be typically set from BoardConfig.mk.
## Files under out dir will be rejected to prevent possible conflicts with other rules.
PDK_PLATFORM_ZIP_PRODUCT_BINARIES := $(filter-out $(OUT_DIR)/%,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES))
INSTALLED_PLATFORM_ZIP := $(PRODUCT_OUT)/platform.zip
$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES)
$(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)")
$(hide) rm -f $@
$(hide) cd $(dir $@) && zip -qry $(notdir $@) \
$(TARGET_COPY_OUT_SYSTEM) \
$(patsubst $(PRODUCT_OUT)/%, %, $(TARGET_OUT_NOTICE_FILES)) \
$(addprefix symbols/,$(PDK_SYMBOL_FILES_LIST))
ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
$(hide) cd $(dir $@) && zip -qry $(notdir $@) \
$(TARGET_COPY_OUT_VENDOR)
endif
ifneq ($(PDK_PLATFORM_JAVA_ZIP_CONTENTS),)
$(hide) cd $(OUT_DIR) && zip -qry $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS)
endif
ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),)
$(hide) zip -qry $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)
endif
.PHONY: platform
platform: $(INSTALLED_PLATFORM_ZIP)
.PHONY: platform-java
platform-java: platform
# Dist the platform.zip
ifneq (,$(filter platform platform-java, $(MAKECMDGOALS)))
$(call dist-for-goals, platform platform-java, $(INSTALLED_PLATFORM_ZIP))
endif
#######
## boot tarball
define build-boottarball-target
$(hide) echo "Target boot fs tarball: $(INSTALLED_BOOTTARBALL_TARGET)"
$(hide) mkdir -p $(PRODUCT_OUT)/boot
$(hide) cp -f $(INTERNAL_BOOTIMAGE_FILES) $(PRODUCT_OUT)/boot/.
$(hide) echo $(BOARD_KERNEL_CMDLINE) > $(PRODUCT_OUT)/boot/cmdline
$(hide) $(MKTARBALL) $(FS_GET_STATS) \
$(PRODUCT_OUT) boot $(PRIVATE_BOOT_TAR) \
$(INSTALLED_BOOTTARBALL_TARGET)
endef
ifndef BOOT_TARBALL_FORMAT
BOOT_TARBALL_FORMAT := bz2
endif
boot_tar := $(PRODUCT_OUT)/boot.tar
INSTALLED_BOOTTARBALL_TARGET := $(boot_tar).$(BOOT_TARBALL_FORMAT)
$(INSTALLED_BOOTTARBALL_TARGET): PRIVATE_BOOT_TAR := $(boot_tar)
$(INSTALLED_BOOTTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_BOOTIMAGE_FILES)
$(build-boottarball-target)
.PHONY: boottarball-nodeps btnod
boottarball-nodeps btnod: $(FS_GET_STATS) \
$(filter-out boottarball-nodeps btnod,$(MAKECMDGOALS))
$(build-boottarball-target)
# -----------------------------------------------------------------
# data partition image
INTERNAL_USERDATAIMAGE_FILES := \
$(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES))
# Don't build userdata.img if it's extfs but no partition size
skip_userdata.img :=
ifdef INTERNAL_USERIMAGES_EXT_VARIANT
ifndef BOARD_USERDATAIMAGE_PARTITION_SIZE
skip_userdata.img := true
endif
endif
ifneq ($(skip_userdata.img),true)
userdataimage_intermediates := \
$(call intermediates-dir-for,PACKAGING,userdata)
BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img
define build-userdataimage-target
$(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)")
@mkdir -p $(TARGET_OUT_DATA)
@mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt
$(call generate-userimage-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt, skip_fsck=true)
$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
./build/tools/releasetools/build_image.py \
$(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt $(INSTALLED_USERDATAIMAGE_TARGET)
$(hide) $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE))
endef
# We just build this directly to the install location.
INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET)
$(INSTALLED_USERDATAIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) \
$(INTERNAL_USERDATAIMAGE_FILES)
$(build-userdataimage-target)
.PHONY: userdataimage-nodeps
userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS)
$(build-userdataimage-target)
endif # not skip_userdata.img
skip_userdata.img :=
#######
## data partition tarball
define build-userdatatarball-target
$(call pretty,"Target userdata fs tarball: " \
"$(INSTALLED_USERDATATARBALL_TARGET)")
$(MKTARBALL) $(FS_GET_STATS) \
$(PRODUCT_OUT) data $(PRIVATE_USERDATA_TAR) \
$(INSTALLED_USERDATATARBALL_TARGET)
endef
userdata_tar := $(PRODUCT_OUT)/userdata.tar
INSTALLED_USERDATATARBALL_TARGET := $(userdata_tar).bz2
$(INSTALLED_USERDATATARBALL_TARGET): PRIVATE_USERDATA_TAR := $(userdata_tar)
$(INSTALLED_USERDATATARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_USERDATAIMAGE_FILES)
$(build-userdatatarball-target)
.PHONY: userdatatarball-nodeps
userdatatarball-nodeps: $(FS_GET_STATS)
$(build-userdatatarball-target)
# -----------------------------------------------------------------
# cache partition image
ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
INTERNAL_CACHEIMAGE_FILES := \
$(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES))
cacheimage_intermediates := \
$(call intermediates-dir-for,PACKAGING,cache)
BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img
define build-cacheimage-target
$(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)")
@mkdir -p $(TARGET_OUT_CACHE)
@mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt
$(call generate-userimage-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt, skip_fsck=true)
$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
./build/tools/releasetools/build_image.py \
$(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt $(INSTALLED_CACHEIMAGE_TARGET)
$(hide) $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE))
endef
# We just build this directly to the install location.
INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET)
$(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES)
$(build-cacheimage-target)
.PHONY: cacheimage-nodeps
cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS)
$(build-cacheimage-target)
endif # BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
# -----------------------------------------------------------------
# vendor partition image
ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
INTERNAL_VENDORIMAGE_FILES := \
$(filter $(TARGET_OUT_VENDOR)/%,\
$(ALL_DEFAULT_INSTALLED_MODULES)\
$(ALL_PDK_FUSION_FILES))
# platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES).
$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES)
vendorimage_intermediates := \
$(call intermediates-dir-for,PACKAGING,vendor)
BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img
define build-vendorimage-target
$(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)")
@mkdir -p $(TARGET_OUT_VENDOR)
@mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt
$(call generate-userimage-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt, skip_fsck=true)
$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
./build/tools/releasetools/build_image.py \
$(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET)
$(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE))
endef
# We just build this directly to the install location.
INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET)
$(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES)
$(build-vendorimage-target)
.PHONY: vendorimage-nodeps
vendorimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS)
$(build-vendorimage-target)
endif # BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
# -----------------------------------------------------------------
# host tools needed to build dist and OTA packages
DISTTOOLS := $(HOST_OUT_EXECUTABLES)/minigzip \
$(HOST_OUT_EXECUTABLES)/mkbootfs \
$(HOST_OUT_EXECUTABLES)/mkbootimg \
$(HOST_OUT_EXECUTABLES)/fs_config \
$(HOST_OUT_EXECUTABLES)/mkyaffs2image \
$(HOST_OUT_EXECUTABLES)/zipalign \
$(HOST_OUT_EXECUTABLES)/bsdiff \
$(HOST_OUT_EXECUTABLES)/imgdiff \
$(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \
$(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \
$(HOST_OUT_EXECUTABLES)/mkuserimg.sh \
$(HOST_OUT_EXECUTABLES)/make_ext4fs \
$(HOST_OUT_EXECUTABLES)/simg2img \
$(HOST_OUT_EXECUTABLES)/e2fsck \
$(HOST_OUT_EXECUTABLES)/build_verity_tree \
$(HOST_OUT_EXECUTABLES)/verity_signer \
$(HOST_OUT_EXECUTABLES)/append2simg \
$(HOST_OUT_EXECUTABLES)/boot_signer
OTATOOLS := $(DISTTOOLS) \
$(HOST_OUT_EXECUTABLES)/aapt
.PHONY: otatools
otatools: $(OTATOOLS)
# -----------------------------------------------------------------
# A zip of the directories that map to the target filesystem.
# This zip can be used to create an OTA package or filesystem image
# as a post-build step.
#
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
name := $(name)_debug
endif
name := $(name)-target_files-$(FILE_NAME_TAG)
intermediates := $(call intermediates-dir-for,PACKAGING,target_files)
BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip
$(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates)
$(BUILT_TARGET_FILES_PACKAGE): \
zip_root := $(intermediates)/$(name)
# $(1): Directory to copy
# $(2): Location to copy it to
# The "ls -A" is to prevent "acp s/* d" from failing if s is empty.
define package_files-copy-root
if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \
mkdir -p $(2) && \
$(ACP) -rd $(strip $(1))/* $(2); \
fi
endef
built_ota_tools := \
$(call intermediates-dir-for,EXECUTABLES,applypatch)/applypatch \
$(call intermediates-dir-for,EXECUTABLES,applypatch_static)/applypatch_static \
$(call intermediates-dir-for,EXECUTABLES,check_prereq)/check_prereq \
$(call intermediates-dir-for,EXECUTABLES,sqlite3)/sqlite3 \
$(call intermediates-dir-for,EXECUTABLES,updater)/updater
$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools)
$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION)
$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_FSTAB_VERSION := $(RECOVERY_FSTAB_VERSION)
ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),)
# default to common dir for device vendor
$(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_DEVICE_DIR)/../common
else
$(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
endif
# Depending on the various images guarantees that the underlying
# directories are up-to-date.
$(BUILT_TARGET_FILES_PACKAGE): \
$(INSTALLED_BOOTIMAGE_TARGET) \
$(INSTALLED_RADIOIMAGE_TARGET) \
$(INSTALLED_RECOVERYIMAGE_TARGET) \
$(INSTALLED_SYSTEMIMAGE) \
$(INSTALLED_USERDATAIMAGE_TARGET) \
$(INSTALLED_CACHEIMAGE_TARGET) \
$(INSTALLED_VENDORIMAGE_TARGET) \
$(INSTALLED_ANDROID_INFO_TXT_TARGET) \
$(SELINUX_FC) \
$(built_ota_tools) \
$(APKCERTS_FILE) \
$(HOST_OUT_EXECUTABLES)/fs_config \
| $(ACP)
@echo "Package target files: $@"
$(hide) rm -rf $@ $(zip_root)
$(hide) mkdir -p $(dir $@) $(zip_root)
@# Components of the recovery image
$(hide) mkdir -p $(zip_root)/RECOVERY
$(hide) $(call package_files-copy-root, \
$(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/RECOVERY/RAMDISK)
ifdef INSTALLED_KERNEL_TARGET
$(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/RECOVERY/kernel
endif
ifdef INSTALLED_2NDBOOTLOADER_TARGET
$(hide) $(ACP) \
$(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/RECOVERY/second
endif
ifdef BOARD_KERNEL_CMDLINE
$(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/RECOVERY/cmdline
endif
ifdef BOARD_KERNEL_BASE
$(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/RECOVERY/base
endif
ifdef BOARD_KERNEL_PAGESIZE
$(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/RECOVERY/pagesize
endif
@# Components of the boot image
$(hide) mkdir -p $(zip_root)/BOOT
$(hide) $(call package_files-copy-root, \
$(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK)
ifdef INSTALLED_KERNEL_TARGET
$(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel
endif
ifdef INSTALLED_2NDBOOTLOADER_TARGET
$(hide) $(ACP) \
$(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second
endif
ifdef BOARD_KERNEL_CMDLINE
$(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline
endif
ifdef BOARD_KERNEL_BASE
$(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base
endif
ifdef BOARD_KERNEL_PAGESIZE
$(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize
endif
$(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\
mkdir -p $(zip_root)/RADIO; \
$(ACP) $(t) $(zip_root)/RADIO/$(notdir $(t));)
@# Contents of the system image
$(hide) $(call package_files-copy-root, \
$(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM)
@# Contents of the data image
$(hide) $(call package_files-copy-root, \
$(TARGET_OUT_DATA),$(zip_root)/DATA)
ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
@# Contents of the vendor image
$(hide) $(call package_files-copy-root, \
$(TARGET_OUT_VENDOR),$(zip_root)/VENDOR)
endif
@# Extra contents of the OTA package
$(hide) mkdir -p $(zip_root)/OTA/bin
$(hide) $(ACP) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/
$(hide) $(ACP) $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/
@# Files that do not end up in any images, but are necessary to
@# build them.
$(hide) mkdir -p $(zip_root)/META
$(hide) $(ACP) $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt
$(hide) if test -e $(tool_extensions)/releasetools.py; then $(ACP) $(tool_extensions)/releasetools.py $(zip_root)/META/; fi
$(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt
$(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt
$(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt
ifdef BOARD_FLASH_BLOCK_SIZE
$(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_BOOTIMAGE_PARTITION_SIZE
$(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE
$(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS
@# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used.
$(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt
else
$(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt
endif
$(hide) echo "tool_extensions=$(tool_extensions)" >> $(zip_root)/META/misc_info.txt
$(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $(zip_root)/META/misc_info.txt
ifdef PRODUCT_EXTRA_RECOVERY_KEYS
$(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $(zip_root)/META/misc_info.txt
endif
$(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $(zip_root)/META/misc_info.txt
$(hide) echo "use_set_metadata=1" >> $(zip_root)/META/misc_info.txt
$(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt
$(hide) echo "update_rename_support=1" >> $(zip_root)/META/misc_info.txt
ifneq ($(OEM_THUMBPRINT_PROPERTIES),)
# OTA scripts are only interested in fingerprint related properties
$(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $(zip_root)/META/misc_info.txt
endif
$(call generate-userimage-prop-dictionary, $(zip_root)/META/misc_info.txt)
$(hide) ./build/tools/releasetools/make_recovery_patch $(zip_root) $(zip_root)
@# Zip everything up, preserving symlinks
$(hide) (cd $(zip_root) && zip -qry ../$(notdir $@) .)
@# Run fs_config on all the system, vendor, boot ramdisk,
@# and recovery ramdisk files in the zip, and save the output
$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="SYSTEM/" } /^SYSTEM\// {print "system/" $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/filesystem_config.txt
$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="VENDOR/" } /^VENDOR\// {print "vendor/" $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/vendor_filesystem_config.txt
$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="BOOT/RAMDISK/" } /^BOOT\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/boot_filesystem_config.txt
$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="RECOVERY/RAMDISK/" } /^RECOVERY\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/recovery_filesystem_config.txt
$(hide) (cd $(zip_root) && zip -q ../$(notdir $@) META/*filesystem_config.txt)
$(hide) ./build/tools/releasetools/add_img_to_target_files -p $(HOST_OUT) $@
.PHONY: target-files-package
target-files-package: $(BUILT_TARGET_FILES_PACKAGE)
ifneq ($(filter $(MAKECMDGOALS),target-files-package),)
$(call dist-for-goals, target-files-package, $(BUILT_TARGET_FILES_PACKAGE))
endif
ifneq ($(TARGET_PRODUCT),sdk)
ifeq ($(filter generic%,$(TARGET_DEVICE)),)
ifneq ($(TARGET_NO_KERNEL),true)
ifneq ($(recovery_fstab),)
# -----------------------------------------------------------------
# OTA update package
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
name := $(name)_debug
endif
name := $(name)-ota-$(FILE_NAME_TAG)
INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip
$(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
$(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS)
@echo "Package OTA: $@"
$(hide) MKBOOTIMG=$(MKBOOTIMG) \
./build/tools/releasetools/ota_from_target_files -v \
--block \
-p $(HOST_OUT) \
-k $(KEY_CERT_PAIR) \
$(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \
$(BUILT_TARGET_FILES_PACKAGE) $@
.PHONY: otapackage
otapackage: $(INTERNAL_OTA_PACKAGE_TARGET)
endif # recovery_fstab is defined
endif # TARGET_NO_KERNEL != true
endif # TARGET_DEVICE != generic*
endif # TARGET_PRODUCT != sdk
# -----------------------------------------------------------------
# The update package
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
name := $(name)_debug
endif
name := $(name)-img-$(FILE_NAME_TAG)
INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip
$(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS)
@echo "Package: $@"
$(hide) MKBOOTIMG=$(MKBOOTIMG) \
./build/tools/releasetools/img_from_target_files -v \
-p $(HOST_OUT) \
$(BUILT_TARGET_FILES_PACKAGE) $@
.PHONY: updatepackage
updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET)
# -----------------------------------------------------------------
# A zip of the symbols directory. Keep the full paths to make it
# more obvious where these files came from.
#
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
name := $(name)_debug
endif
name := $(name)-symbols-$(FILE_NAME_TAG)
SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip
# For apps_only build we'll establish the dependency later in build/core/main.mk.
ifndef TARGET_BUILD_APPS
$(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE) $(INSTALLED_BOOTIMAGE_TARGET)
endif
$(SYMBOLS_ZIP):
@echo "Package symbols: $@"
$(hide) rm -rf $@
$(hide) mkdir -p $(dir $@) $(TARGET_OUT_UNSTRIPPED)
$(hide) zip -qr $@ $(TARGET_OUT_UNSTRIPPED)
# -----------------------------------------------------------------
# A zip of the Android Apps. Not keeping full path so that we don't
# include product names when distributing
#
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
name := $(name)_debug
endif
name := $(name)-apps-$(FILE_NAME_TAG)
APPS_ZIP := $(PRODUCT_OUT)/$(name).zip
$(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE)
@echo "Package apps: $@"
$(hide) rm -rf $@
$(hide) mkdir -p $(dir $@)
$(hide) zip -qj $@ $(TARGET_OUT_APPS)/*/*.apk $(TARGET_OUT_APPS_PRIVILEGED)/*/*.apk
#------------------------------------------------------------------
# A zip of emma code coverage meta files. Generated for fully emma
# instrumented build.
#
ifeq (true,$(EMMA_INSTRUMENT))
EMMA_META_ZIP := $(PRODUCT_OUT)/emma_meta.zip
# the dependency will be set up later in build/core/main.mk.
$(EMMA_META_ZIP) :
@echo "Collecting Emma coverage meta files."
$(hide) find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "coverage.em" | \
zip -@ -q $@
endif # EMMA_INSTRUMENT=true
#------------------------------------------------------------------
# A zip of Proguard obfuscation dictionary files.
# Only for apps_only build.
#
ifdef TARGET_BUILD_APPS
PROGUARD_DICT_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-dict-$(FILE_NAME_TAG).zip
# the dependency will be set up later in build/core/main.mk.
$(PROGUARD_DICT_ZIP) :
@echo "Packaging Proguard obfuscation dictionary files."
$(hide) dict_files=`find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary`; \
if [ -n "$$dict_files" ]; then \
unobfuscated_jars=$${dict_files//proguard_dictionary/classes.jar}; \
zip -q $@ $$dict_files $$unobfuscated_jars; \
else \
touch $(dir $@)/dummy; \
(cd $(dir $@) && zip -q $(notdir $@) dummy); \
zip -qd $@ dummy; \
rm $(dir $@)/dummy; \
fi
endif # TARGET_BUILD_APPS
# -----------------------------------------------------------------
# dalvik something
.PHONY: dalvikfiles
dalvikfiles: $(INTERNAL_DALVIK_MODULES)
# -----------------------------------------------------------------
# The emulator package
ifeq ($(BUILD_EMULATOR),true)
INTERNAL_EMULATOR_PACKAGE_FILES += \
$(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \
prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \
$(INSTALLED_RAMDISK_TARGET) \
$(INSTALLED_SYSTEMIMAGE) \
$(INSTALLED_USERDATAIMAGE_TARGET)
name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG)
INTERNAL_EMULATOR_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip
$(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES)
@echo "Package: $@"
$(hide) zip -qj $@ $(INTERNAL_EMULATOR_PACKAGE_FILES)
endif
# -----------------------------------------------------------------
# Old PDK stuffs, retired
# The pdk package (Platform Development Kit)
#ifneq (,$(filter pdk,$(MAKECMDGOALS)))
# include development/pdk/Pdk.mk
#endif
# -----------------------------------------------------------------
# The SDK
# The SDK includes host-specific components, so it belongs under HOST_OUT.
sdk_dir := $(HOST_OUT)/sdk/$(TARGET_PRODUCT)
# Build a name that looks like:
#
# linux-x86 --> android-sdk_12345_linux-x86
# darwin-x86 --> android-sdk_12345_mac-x86
# windows-x86 --> android-sdk_12345_windows
#
sdk_name := android-sdk_$(FILE_NAME_TAG)
ifeq ($(HOST_OS),darwin)
INTERNAL_SDK_HOST_OS_NAME := mac
else
INTERNAL_SDK_HOST_OS_NAME := $(HOST_OS)
endif
ifneq ($(HOST_OS),windows)
INTERNAL_SDK_HOST_OS_NAME := $(INTERNAL_SDK_HOST_OS_NAME)-$(SDK_HOST_ARCH)
endif
sdk_name := $(sdk_name)_$(INTERNAL_SDK_HOST_OS_NAME)
sdk_dep_file := $(sdk_dir)/sdk_deps.mk
ATREE_FILES :=
-include $(sdk_dep_file)
# if we don't have a real list, then use "everything"
ifeq ($(strip $(ATREE_FILES)),)
ATREE_FILES := \
$(ALL_PREBUILT) \
$(ALL_COPIED_HEADERS) \
$(ALL_DEFAULT_INSTALLED_MODULES) \
$(INSTALLED_RAMDISK_TARGET) \
$(ALL_DOCS) \
$(ALL_SDK_FILES)
endif
atree_dir := development/build
sdk_atree_files := \
$(atree_dir)/sdk.exclude.atree \
$(atree_dir)/sdk-$(HOST_OS)-$(SDK_HOST_ARCH).atree
# development/build/sdk-android-<abi>.atree is used to differentiate
# between architecture models (e.g. ARMv5TE versus ARMv7) when copying
# files like the kernel image. We use TARGET_CPU_ABI because we don't
# have a better way to distinguish between CPU models.
ifneq (,$(strip $(wildcard $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree)))
sdk_atree_files += $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree
endif
ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ATREE_FILES),)
sdk_atree_files += $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ATREE_FILES)
else
sdk_atree_files += $(atree_dir)/sdk.atree
endif
include $(BUILD_SYSTEM)/sdk_font.mk
deps := \
$(target_notice_file_txt) \
$(tools_notice_file_txt) \
$(OUT_DOCS)/offline-sdk-timestamp \
$(SYMBOLS_ZIP) \
$(INSTALLED_SYSTEMIMAGE) \
$(INSTALLED_USERDATAIMAGE_TARGET) \
$(INSTALLED_RAMDISK_TARGET) \
$(INSTALLED_SDK_BUILD_PROP_TARGET) \
$(INSTALLED_BUILD_PROP_TARGET) \
$(ATREE_FILES) \
$(sdk_atree_files) \
$(HOST_OUT_EXECUTABLES)/atree \
$(HOST_OUT_EXECUTABLES)/line_endings \
$(SDK_FONT_DEPS)
INTERNAL_SDK_TARGET := $(sdk_dir)/$(sdk_name).zip
$(INTERNAL_SDK_TARGET): PRIVATE_NAME := $(sdk_name)
$(INTERNAL_SDK_TARGET): PRIVATE_DIR := $(sdk_dir)/$(sdk_name)
$(INTERNAL_SDK_TARGET): PRIVATE_DEP_FILE := $(sdk_dep_file)
$(INTERNAL_SDK_TARGET): PRIVATE_INPUT_FILES := $(sdk_atree_files)
# Set SDK_GNU_ERROR to non-empty to fail when a GNU target is built.
#
#SDK_GNU_ERROR := true
$(INTERNAL_SDK_TARGET): $(deps)
@echo "Package SDK: $@"
$(hide) rm -rf $(PRIVATE_DIR) $@
$(hide) for f in $(target_gnu_MODULES); do \
if [ -f $$f ]; then \
echo SDK: $(if $(SDK_GNU_ERROR),ERROR:,warning:) \
including GNU target $$f >&2; \
FAIL=$(SDK_GNU_ERROR); \
fi; \
done; \
if [ $$FAIL ]; then exit 1; fi
$(hide) echo $(notdir $(SDK_FONT_DEPS)) | tr " " "\n" > $(SDK_FONT_TEMP)/fontsInSdk.txt
$(hide) ( \
ATREE_STRIP="strip -x" \
$(HOST_OUT_EXECUTABLES)/atree \
$(addprefix -f ,$(PRIVATE_INPUT_FILES)) \
-m $(PRIVATE_DEP_FILE) \
-I . \
-I $(PRODUCT_OUT) \
-I $(HOST_OUT) \
-I $(TARGET_COMMON_OUT_ROOT) \
-v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \
-v "OUT_DIR=$(OUT_DIR)" \
-v "HOST_OUT=$(HOST_OUT)" \
-v "TARGET_ARCH=$(TARGET_ARCH)" \
-v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \
-v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \
-v "FONT_OUT=$(SDK_FONT_TEMP)" \
-o $(PRIVATE_DIR) && \
cp -f $(target_notice_file_txt) \
$(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \
cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \
HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \
development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \
chmod -R ug+rwX $(PRIVATE_DIR) && \
cd $(dir $@) && zip -rq $(notdir $@) $(PRIVATE_NAME) \
) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 )
# Is a Windows SDK requested? If so, we need some definitions from here
# in order to find the Linux SDK used to create the Windows one.
MAIN_SDK_NAME := $(sdk_name)
MAIN_SDK_DIR := $(sdk_dir)
MAIN_SDK_ZIP := $(INTERNAL_SDK_TARGET)
ifneq ($(filter win_sdk,$(MAKECMDGOALS)),)
include $(TOPDIR)development/build/tools/windows_sdk.mk
endif
# -----------------------------------------------------------------
# Findbugs
INTERNAL_FINDBUGS_XML_TARGET := $(PRODUCT_OUT)/findbugs.xml
INTERNAL_FINDBUGS_HTML_TARGET := $(PRODUCT_OUT)/findbugs.html
$(INTERNAL_FINDBUGS_XML_TARGET): $(ALL_FINDBUGS_FILES)
@echo UnionBugs: $@
$(hide) $(FINDBUGS_DIR)/unionBugs $(ALL_FINDBUGS_FILES) \
> $@
$(INTERNAL_FINDBUGS_HTML_TARGET): $(INTERNAL_FINDBUGS_XML_TARGET)
@echo ConvertXmlToText: $@
$(hide) $(FINDBUGS_DIR)/convertXmlToText -html:fancy.xsl \
$(INTERNAL_FINDBUGS_XML_TARGET) > $@
# -----------------------------------------------------------------
# Findbugs
# -----------------------------------------------------------------
# These are some additional build tasks that need to be run.
ifneq ($(dont_bother),true)
include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk))
-include $(sort $(wildcard vendor/*/build/tasks/*.mk))
-include $(sort $(wildcard device/*/build/tasks/*.mk))
# Also the project-specific tasks
-include $(sort $(wildcard vendor/*/*/build/tasks/*.mk))
-include $(sort $(wildcard device/*/*/build/tasks/*.mk))
endif
# -----------------------------------------------------------------
# Create SDK repository packages. Must be done after tasks/* since
# we need the addon rules defined.
ifneq ($(sdk_repo_goal),)
include $(TOPDIR)development/build/tools/sdk_repo.mk
endif