Make change and version bump to OPR1.170523.001
diff --git a/core/build_id.mk b/core/build_id.mk
index 9a5dd39..e7aff74 100644
--- a/core/build_id.mk
+++ b/core/build_id.mk
@@ -18,4 +18,4 @@
# (like "CRB01"). It must be a single word, and is
# capitalized by convention.
-export BUILD_ID=OPR1.170522.002
+export BUILD_ID=OPR1.170523.001
diff --git a/core/config.mk b/core/config.mk
index cd20354..f692653 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -679,6 +679,16 @@
APICHECK_CLASSPATH := $(APICHECK_CLASSPATH):$(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX)
APICHECK_COMMAND := $(APICHECK) -JXmx1024m -J"classpath $(APICHECK_CLASSPATH)"
+# Boolean variable determining if Treble is fully enabled
+PRODUCT_FULL_TREBLE := false
+ifneq ($(PRODUCT_FULL_TREBLE_OVERRIDE),)
+ PRODUCT_FULL_TREBLE := $(PRODUCT_FULL_TREBLE_OVERRIDE)
+else ifeq ($(PRODUCT_SHIPPING_API_LEVEL),)
+ #$(warning no product shipping level defined)
+else ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),26),)
+ PRODUCT_FULL_TREBLE := true
+endif
+
# The default key if not set as LOCAL_CERTIFICATE
ifdef PRODUCT_DEFAULT_DEV_CERTIFICATE
DEFAULT_SYSTEM_DEV_CERTIFICATE := $(PRODUCT_DEFAULT_DEV_CERTIFICATE)
diff --git a/core/main.mk b/core/main.mk
index 54ab832..cc8d665 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -333,16 +333,6 @@
ADDITIONAL_BUILD_PROPERTIES += ro.bionic.ld.warning=1
endif
-# Boolean variable determining if Treble is fully enabled
-PRODUCT_FULL_TREBLE := false
-ifeq ($(PRODUCT_FULL_TREBLE_OVERRIDE),true)
- PRODUCT_FULL_TREBLE := true
-else ifeq ($(PRODUCT_SHIPPING_API_LEVEL),)
- #$(warning no product shipping level defined)
-else ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),26),)
- PRODUCT_FULL_TREBLE := true
-endif
-
# -----------------------------------------------------------------
###
### In this section we set up the things that are different
diff --git a/core/soong_config.mk b/core/soong_config.mk
index 576c8ab..2157ed5 100644
--- a/core/soong_config.mk
+++ b/core/soong_config.mk
@@ -66,6 +66,7 @@
echo ' "CrossHostSecondaryArch": "$(HOST_CROSS_2ND_ARCH)",'; \
echo ' "Safestack": $(if $(filter true,$(USE_SAFESTACK)),true,false),'; \
echo ' "EnableCFI": $(if $(filter true,$(ENABLE_CFI)),true,false),'; \
+ echo ' "Treble": $(if $(filter true,$(PRODUCT_FULL_TREBLE)),true,false),'; \
echo ''; \
echo ' "ArtUseReadBarrier": $(if $(filter false,$(PRODUCT_ART_USE_READ_BARRIER)),false,true),'; \
echo ''; \
diff --git a/target/board/generic_arm64_a/BoardConfig.mk b/target/board/generic_arm64_a/BoardConfig.mk
new file mode 100644
index 0000000..fbac417
--- /dev/null
+++ b/target/board/generic_arm64_a/BoardConfig.mk
@@ -0,0 +1,71 @@
+#
+# Copyright (C) 2017 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Common boardconfig settings for generic AOSP products targetting mobile
+# (phone/table) devices.
+
+# Bootloader is not part of generic AOSP image
+TARGET_NO_BOOTLOADER := true
+
+# Kernel is also not part of generic AOSP image
+TARGET_NO_KERNEL := true
+
+# system.img is always ext4 with sparse option
+TARGET_USERIMAGES_USE_EXT4 := true
+TARGET_USERIMAGES_SPARSE_EXT_DISABLED := false
+TARGET_USES_MKE2FS := true
+
+# Enable dex pre-opt to speed up initial boot
+ifeq ($(HOST_OS),linux)
+ ifeq ($(WITH_DEXPREOPT),)
+ WITH_DEXPREOPT := true
+ WITH_DEXPREOPT_PIC := true
+ ifneq ($(TARGET_BUILD_VARIANT),user)
+ # Retain classes.dex in APK's for non-user builds
+ DEX_PREOPT_DEFAULT := nostripping
+ endif
+ endif
+endif
+
+# Generic AOSP image always requires separate vendor.img
+BOARD_USES_VENDORIMAGE := true
+TARGET_COPY_OUT_VENDOR := vendor
+
+# Generic AOSP image does NOT support HWC1
+TARGET_USES_HWC2 := true
+
+TARGET_ARCH := arm64
+TARGET_ARCH_VARIANT := armv8-a
+TARGET_CPU_ABI := arm64-v8a
+TARGET_CPU_ABI2 :=
+TARGET_CPU_VARIANT := generic
+
+TARGET_2ND_ARCH := arm
+TARGET_2ND_ARCH_VARIANT := armv7-a-neon
+TARGET_2ND_CPU_ABI := armeabi-v7a
+TARGET_2ND_CPU_ABI2 := armeabi
+TARGET_2ND_CPU_VARIANT := generic
+
+TARGET_USES_64_BIT_BINDER := true
+
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736 # 1.5 GB
+
+# TODO(b/35790399): remove when b/35790399 is fixed.
+BOARD_NAND_SPARE_SIZE := 0
+BOARD_FLASH_BLOCK_SIZE := 512
+
+BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
+
diff --git a/target/board/generic_arm64_a/system.prop b/target/board/generic_arm64_a/system.prop
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/target/board/generic_arm64_a/system.prop
diff --git a/target/board/generic_arm_a/BoardConfig.mk b/target/board/generic_arm_a/BoardConfig.mk
new file mode 100644
index 0000000..6c1b36f
--- /dev/null
+++ b/target/board/generic_arm_a/BoardConfig.mk
@@ -0,0 +1,63 @@
+#
+# Copyright (C) 2017 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Common boardconfig settings for generic AOSP products targetting mobile
+# (phone/table) devices.
+
+# Bootloader is not part of generic AOSP image
+TARGET_NO_BOOTLOADER := true
+
+# Kernel is also not part of generic AOSP image
+TARGET_NO_KERNEL := true
+
+# system.img is always ext4 with sparse option
+TARGET_USERIMAGES_USE_EXT4 := true
+TARGET_USERIMAGES_SPARSE_EXT_DISABLED := false
+TARGET_USES_MKE2FS := true
+
+# Enable dex pre-opt to speed up initial boot
+ifeq ($(HOST_OS),linux)
+ ifeq ($(WITH_DEXPREOPT),)
+ WITH_DEXPREOPT := true
+ WITH_DEXPREOPT_PIC := true
+ ifneq ($(TARGET_BUILD_VARIANT),user)
+ # Retain classes.dex in APK's for non-user builds
+ DEX_PREOPT_DEFAULT := nostripping
+ endif
+ endif
+endif
+
+# Generic AOSP image always requires separate vendor.img
+BOARD_USES_VENDORIMAGE := true
+TARGET_COPY_OUT_VENDOR := vendor
+
+# Generic AOSP image does NOT support HWC1
+TARGET_USES_HWC2 := true
+
+TARGET_ARCH := arm
+TARGET_ARCH_VARIANT := armv7-a-neon
+TARGET_CPU_ABI := armeabi-v7a
+TARGET_CPU_ABI2 := armeabi
+TARGET_CPU_VARIANT := generic
+
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
+
+# TODO(b/35790399): remove when b/35790399 is fixed.
+BOARD_NAND_SPARE_SIZE := 0
+BOARD_FLASH_BLOCK_SIZE := 512
+
+BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
+
diff --git a/target/board/generic_arm_a/system.prop b/target/board/generic_arm_a/system.prop
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/target/board/generic_arm_a/system.prop
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index 2ad4572..285fc39 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -42,7 +42,6 @@
$(LOCAL_DIR)/aosp_mips.mk \
$(LOCAL_DIR)/full_mips.mk \
$(LOCAL_DIR)/aosp_arm64.mk \
- $(LOCAL_DIR)/aosp_arm64_ab.mk \
$(LOCAL_DIR)/aosp_mips64.mk \
$(LOCAL_DIR)/aosp_x86_64.mk
else
@@ -52,6 +51,7 @@
$(LOCAL_DIR)/generic_x86.mk \
$(LOCAL_DIR)/generic_mips.mk \
$(LOCAL_DIR)/aosp_arm.mk \
+ $(LOCAL_DIR)/aosp_arm_a.mk \
$(LOCAL_DIR)/full.mk \
$(LOCAL_DIR)/aosp_x86.mk \
$(LOCAL_DIR)/aosp_x86_arm.mk \
@@ -59,6 +59,7 @@
$(LOCAL_DIR)/aosp_mips.mk \
$(LOCAL_DIR)/full_mips.mk \
$(LOCAL_DIR)/aosp_arm64.mk \
+ $(LOCAL_DIR)/aosp_arm64_a.mk \
$(LOCAL_DIR)/aosp_arm64_ab.mk \
$(LOCAL_DIR)/aosp_mips64.mk \
$(LOCAL_DIR)/aosp_x86_64.mk \
diff --git a/target/product/aosp_arm64_a.mk b/target/product/aosp_arm64_a.mk
new file mode 100644
index 0000000..0b0ba61
--- /dev/null
+++ b/target/product/aosp_arm64_a.mk
@@ -0,0 +1,111 @@
+#
+# Copyright (C) 2017 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# PRODUCT_PROPERTY_OVERRIDES cannot be used here because sysprops will be at
+# /vendor/[build|default].prop when build split is on. In order to have sysprops
+# on the generic system image, place them in build/make/target/board/generic_arm_nonab/
+# system.prop.
+
+PRODUCT_COPY_FILES := \
+ device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml
+
+#split selinux policy
+PRODUCT_FULL_TREBLE_OVERRIDE := true
+
+# Some of HAL interface libraries are automatically added by the dependencies from
+# the framework. However, we list them all here to make it explicit and prevent
+# possible mistake.
+PRODUCT_PACKAGES := \
+ android.dvr.composer@1.0 \
+ android.hardware.audio@2.0 \
+ android.hardware.audio.common@2.0 \
+ android.hardware.audio.common@2.0-util \
+ android.hardware.audio.effect@2.0 \
+ android.hardware.biometrics.fingerprint@2.1 \
+ android.hardware.bluetooth@1.0 \
+ android.hardware.boot@1.0 \
+ android.hardware.broadcastradio@1.0 \
+ android.hardware.broadcastradio@1.1 \
+ android.hardware.camera.common@1.0 \
+ android.hardware.camera.device@1.0 \
+ android.hardware.camera.device@3.2 \
+ android.hardware.camera.provider@2.4 \
+ android.hardware.configstore@1.0 \
+ android.hardware.contexthub@1.0 \
+ android.hardware.drm@1.0 \
+ android.hardware.gatekeeper@1.0 \
+ android.hardware.gnss@1.0 \
+ android.hardware.graphics.allocator@2.0 \
+ android.hardware.graphics.common@1.0 \
+ android.hardware.graphics.composer@2.1 \
+ android.hardware.graphics.mapper@2.0 \
+ android.hardware.ir@1.0 \
+ android.hardware.keymaster@3.0 \
+ android.hardware.light@2.0 \
+ android.hardware.media@1.0 \
+ android.hardware.media.omx@1.0 \
+ android.hardware.media.omx@1.0-utils \
+ android.hardware.memtrack@1.0 \
+ android.hardware.nfc@1.0 \
+ android.hardware.oemlock@1.0 \
+ android.hardware.power@1.0 \
+ android.hardware.radio@1.0 \
+ android.hardware.radio.deprecated@1.0 \
+ android.hardware.sensors@1.0 \
+ android.hardware.soundtrigger@2.0 \
+ android.hardware.thermal@1.0 \
+ android.hardware.tv.cec@1.0 \
+ android.hardware.tv.input@1.0 \
+ android.hardware.usb@1.0 \
+ android.hardware.vibrator@1.0 \
+ android.hardware.vr@1.0 \
+ android.hardware.weaver@1.0 \
+ android.hardware.wifi@1.0 \
+ android.hardware.wifi.supplicant@1.0 \
+ android.hidl.allocator@1.0 \
+ android.hidl.base@1.0 \
+ android.hidl.manager@1.0 \
+ android.hidl.memory@1.0 \
+
+PRODUCT_PACKAGES += \
+ libdynamic_sensor_ext \
+ libaudioroute \
+ libxml2 \
+ libtinyalsa \
+ libtinycompress \
+ cplay \
+ libion \
+
+# WiFi
+# Note: Wifi HAL (android.hardware.wifi@1.0-service, wpa_supplicant,
+# and wpa_supplicant.conf) is not here. They are at vendor.img
+PRODUCT_PACKAGES += \
+ libwpa_client \
+ hostapd \
+ hostapd_cli \
+ wificond \
+ wifilogd \
+
+PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/bootdevice/by-name/system
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/verity.mk)
+
+PRODUCT_NAME := aosp_arm64_a
+PRODUCT_DEVICE := generic_arm64_a
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on ARM64
diff --git a/target/product/aosp_arm_a.mk b/target/product/aosp_arm_a.mk
new file mode 100644
index 0000000..83db402
--- /dev/null
+++ b/target/product/aosp_arm_a.mk
@@ -0,0 +1,111 @@
+#
+# Copyright (C) 2017 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# PRODUCT_PROPERTY_OVERRIDES cannot be used here because sysprops will be at
+# /vendor/[build|default].prop when build split is on. In order to have sysprops
+# on the generic system image, place them in build/make/target/board/generic_arm_a/
+# system.prop.
+
+PRODUCT_COPY_FILES := \
+ device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml
+
+#split selinux policy
+PRODUCT_FULL_TREBLE_OVERRIDE := true
+
+# Some of HAL interface libraries are automatically added by the dependencies from
+# the framework. However, we list them all here to make it explicit and prevent
+# possible mistake.
+PRODUCT_PACKAGES := \
+ android.dvr.composer@1.0 \
+ android.hardware.audio@2.0 \
+ android.hardware.audio.common@2.0 \
+ android.hardware.audio.common@2.0-util \
+ android.hardware.audio.effect@2.0 \
+ android.hardware.biometrics.fingerprint@2.1 \
+ android.hardware.bluetooth@1.0 \
+ android.hardware.boot@1.0 \
+ android.hardware.broadcastradio@1.0 \
+ android.hardware.broadcastradio@1.1 \
+ android.hardware.camera.common@1.0 \
+ android.hardware.camera.device@1.0 \
+ android.hardware.camera.device@3.2 \
+ android.hardware.camera.provider@2.4 \
+ android.hardware.configstore@1.0 \
+ android.hardware.contexthub@1.0 \
+ android.hardware.drm@1.0 \
+ android.hardware.gatekeeper@1.0 \
+ android.hardware.gnss@1.0 \
+ android.hardware.graphics.allocator@2.0 \
+ android.hardware.graphics.common@1.0 \
+ android.hardware.graphics.composer@2.1 \
+ android.hardware.graphics.mapper@2.0 \
+ android.hardware.ir@1.0 \
+ android.hardware.keymaster@3.0 \
+ android.hardware.light@2.0 \
+ android.hardware.media@1.0 \
+ android.hardware.media.omx@1.0 \
+ android.hardware.media.omx@1.0-utils \
+ android.hardware.memtrack@1.0 \
+ android.hardware.nfc@1.0 \
+ android.hardware.oemlock@1.0 \
+ android.hardware.power@1.0 \
+ android.hardware.radio@1.0 \
+ android.hardware.radio.deprecated@1.0 \
+ android.hardware.sensors@1.0 \
+ android.hardware.soundtrigger@2.0 \
+ android.hardware.thermal@1.0 \
+ android.hardware.tv.cec@1.0 \
+ android.hardware.tv.input@1.0 \
+ android.hardware.usb@1.0 \
+ android.hardware.usb@1.1 \
+ android.hardware.vibrator@1.0 \
+ android.hardware.vr@1.0 \
+ android.hardware.weaver@1.0 \
+ android.hardware.wifi@1.0 \
+ android.hardware.wifi.supplicant@1.0 \
+ android.hidl.allocator@1.0 \
+ android.hidl.base@1.0 \
+ android.hidl.manager@1.0 \
+ android.hidl.memory@1.0 \
+
+PRODUCT_PACKAGES += \
+ libdynamic_sensor_ext \
+ libaudioroute \
+ libxml2 \
+ libtinyalsa \
+ libtinycompress \
+ cplay \
+ libion \
+
+# WiFi
+# Note: Wifi HAL (android.hardware.wifi@1.0-service, wpa_supplicant,
+# and wpa_supplicant.conf) is not here. They are at vendor.img
+PRODUCT_PACKAGES += \
+ libwpa_client \
+ hostapd \
+ hostapd_cli \
+ wificond \
+ wifilogd \
+
+PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/bootdevice/by-name/system
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/verity.mk)
+
+PRODUCT_NAME := aosp_arm_a
+PRODUCT_DEVICE := generic_arm_a
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on ARM32
