Remove more always-true ARCH_ARM_HAVE_ flags.
All the remaining flags appear to be actually used.
Change-Id: I0e3d84915487eda4f0e97809fc36624fef5f1848
diff --git a/core/combo/TARGET_linux-arm.mk b/core/combo/TARGET_linux-arm.mk
index bc78174..cb10542 100644
--- a/core/combo/TARGET_linux-arm.mk
+++ b/core/combo/TARGET_linux-arm.mk
@@ -77,18 +77,11 @@
-fstrict-aliasing \
-funswitch-loops
-# Modules can choose to compile some source as thumb. As
-# non-thumb enabled targets are supported, this is treated
-# as a 'hint'. If thumb is not enabled, these files are just
-# compiled as ARM.
-ifeq ($(ARCH_ARM_HAVE_THUMB_SUPPORT),true)
+# Modules can choose to compile some source as thumb.
TARGET_thumb_CFLAGS := -mthumb \
-Os \
-fomit-frame-pointer \
-fno-strict-aliasing
-else
-TARGET_thumb_CFLAGS := $(TARGET_arm_CFLAGS)
-endif
# Set FORCE_ARM_DEBUGGING to "true" in your buildspec.mk
# or in your environment to force a full arm build, even for
@@ -147,15 +140,7 @@
-Wl,--icf=safe \
$(arch_variant_ldflags)
-# We only need thumb interworking in cases where thumb support
-# is available in the architecture, and just to be sure, (and
-# since sometimes thumb-interwork appears to be default), we
-# specifically disable when thumb support is unavailable.
-ifeq ($(ARCH_ARM_HAVE_THUMB_SUPPORT),true)
TARGET_GLOBAL_CFLAGS += -mthumb-interwork
-else
-TARGET_GLOBAL_CFLAGS += -mno-thumb-interwork
-endif
TARGET_GLOBAL_CPPFLAGS += -fvisibility-inlines-hidden
diff --git a/core/combo/arch/arm/armv5te.mk b/core/combo/arch/arm/armv5te.mk
index 1c25e36..88e57b7 100644
--- a/core/combo/arch/arm/armv5te.mk
+++ b/core/combo/arch/arm/armv5te.mk
@@ -1,10 +1,6 @@
# Configuration for Linux on ARM.
# Generating binaries for the ARMv5TE architecture and higher
#
-ARCH_ARM_HAVE_THUMB_SUPPORT := true
-ARCH_ARM_HAVE_FAST_INTERWORKING := true
-ARCH_ARM_HAVE_64BIT_DATA := true
-ARCH_ARM_HAVE_HALFWORD_MULTIPLY := true
# Note: Hard coding the 'tune' value here is probably not ideal,
# and a better solution should be found in the future.
diff --git a/core/combo/arch/arm/armv7-a-neon.mk b/core/combo/arch/arm/armv7-a-neon.mk
index d8ef499..7884366 100644
--- a/core/combo/arch/arm/armv7-a-neon.mk
+++ b/core/combo/arch/arm/armv7-a-neon.mk
@@ -1,12 +1,7 @@
# Configuration for Linux on ARM.
# Generating binaries for the ARMv7-a architecture and higher with NEON
#
-ARCH_ARM_HAVE_THUMB_SUPPORT := true
-ARCH_ARM_HAVE_FAST_INTERWORKING := true
-ARCH_ARM_HAVE_64BIT_DATA := true
-ARCH_ARM_HAVE_HALFWORD_MULTIPLY := true
ARCH_ARM_HAVE_ARMV7A := true
-ARCH_ARM_HAVE_TLS_REGISTER := true
ARCH_ARM_HAVE_VFP := true
ARCH_ARM_HAVE_VFP_D32 := true
ARCH_ARM_HAVE_NEON := true
diff --git a/core/combo/arch/arm/armv7-a.mk b/core/combo/arch/arm/armv7-a.mk
index 7c33a5a..4a51977 100644
--- a/core/combo/arch/arm/armv7-a.mk
+++ b/core/combo/arch/arm/armv7-a.mk
@@ -1,12 +1,7 @@
# Configuration for Linux on ARM.
# Generating binaries for the ARMv7-a architecture and higher
#
-ARCH_ARM_HAVE_THUMB_SUPPORT := true
-ARCH_ARM_HAVE_FAST_INTERWORKING := true
-ARCH_ARM_HAVE_64BIT_DATA := true
-ARCH_ARM_HAVE_HALFWORD_MULTIPLY := true
ARCH_ARM_HAVE_ARMV7A := true
-ARCH_ARM_HAVE_TLS_REGISTER := true
ARCH_ARM_HAVE_VFP := true
# Note: Hard coding the 'tune' value here is probably not ideal,
diff --git a/target/board/generic/BoardConfig.mk b/target/board/generic/BoardConfig.mk
index 7a25f30..3b03250 100644
--- a/target/board/generic/BoardConfig.mk
+++ b/target/board/generic/BoardConfig.mk
@@ -22,7 +22,6 @@
TARGET_ARCH_VARIANT := armv7-a
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
-ARCH_ARM_HAVE_TLS_REGISTER := true
HAVE_HTC_AUDIO_DRIVER := true
BOARD_USES_GENERIC_AUDIO := true
