Google Git
Sign in
android / platform / art / ff74a74a7c0535a51d677c36fd6a37c34d30ea38 / . / runtime / interpreter / mterp / out / mterp_mips64.S
blob: cf95a57a0eed0212936ad4c08300424452c9e998 [file] [log] [blame]
/* DO NOT EDIT: This file was generated by gen-mterp.py. */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define zero $0 /* always zero */
#define AT $at /* assembler temp */
#define v0 $2 /* return value */
#define v1 $3
#define a0 $4 /* argument registers */
#define a1 $5
#define a2 $6
#define a3 $7
#define a4 $8 /* expanded register arguments */
#define a5 $9
#define a6 $10
#define a7 $11
#define ta0 $8 /* alias */
#define ta1 $9
#define ta2 $10
#define ta3 $11
#define t0 $12 /* temp registers (not saved across subroutine calls) */
#define t1 $13
#define t2 $14
#define t3 $15
#define s0 $16 /* saved across subroutine calls (callee saved) */
#define s1 $17
#define s2 $18
#define s3 $19
#define s4 $20
#define s5 $21
#define s6 $22
#define s7 $23
#define t8 $24 /* two more temp registers */
#define t9 $25
#define k0 $26 /* kernel temporary */
#define k1 $27
#define gp $28 /* global pointer */
#define sp $29 /* stack pointer */
#define s8 $30 /* one more callee saved */
#define ra $31 /* return address */
#define f0 $f0
#define f1 $f1
#define f2 $f2
#define f3 $f3
#define f12 $f12
#define f13 $f13
/*
* It looks like the GNU assembler currently does not support the blec and bgtc
* idioms, which should translate into bgec and bltc respectively with swapped
* left and right register operands.
* TODO: remove these macros when the assembler is fixed.
*/
.macro blec lreg, rreg, target
bgec \rreg, \lreg, \target
.endm
.macro bgtc lreg, rreg, target
bltc \rreg, \lreg, \target
.endm
/*
Mterp and MIPS64 notes:
The following registers have fixed assignments:
reg nick purpose
s0 rPC interpreted program counter, used for fetching instructions
s1 rFP interpreted frame pointer, used for accessing locals and args
s2 rSELF self (Thread) pointer
s3 rINST first 16-bit code unit of current instruction
s4 rIBASE interpreted instruction base pointer, used for computed goto
s5 rREFS base of object references in shadow frame (ideally, we'll get rid of this later).
s6 rPROFILE jit profile hotness countdown
*/
/* During bringup, we'll use the shadow frame model instead of rFP */
/* single-purpose registers, given names for clarity */
#define rPC s0
#define CFI_DEX 16 // DWARF register number of the register holding dex-pc (s0).
#define CFI_TMP 4 // DWARF register number of the first argument register (a0).
#define rFP s1
#define rSELF s2
#define rINST s3
#define rIBASE s4
#define rREFS s5
#define rPROFILE s6
/*
* This is a #include, not a %include, because we want the C pre-processor
* to expand the macros into assembler assignment statements.
*/
#include "asm_support.h"
#include "interpreter/cfi_asm_support.h"
/*
* Instead of holding a pointer to the shadow frame, we keep rFP at the base of the vregs. So,
* to access other shadow frame fields, we need to use a backwards offset. Define those here.
*/
#define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET)
#define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET)
#define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET)
#define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET)
#define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET)
#define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET)
#define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET)
#define OFF_FP_DEX_INSTRUCTIONS OFF_FP(SHADOWFRAME_DEX_INSTRUCTIONS_OFFSET)
#define OFF_FP_SHADOWFRAME OFF_FP(0)
#define MTERP_PROFILE_BRANCHES 1
#define MTERP_LOGGING 0
/*
* "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must
* be done *before* something throws.
*
* It's okay to do this more than once.
*
* NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped
* dex byte codes. However, the rest of the runtime expects dex pc to be an instruction
* offset into the code_items_[] array. For effiency, we will "export" the
* current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC
* to convert to a dex pc when needed.
*/
.macro EXPORT_PC
sd rPC, OFF_FP_DEX_PC_PTR(rFP)
.endm
/*
* Refresh handler table.
*/
.macro REFRESH_IBASE
ld rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF)
.endm
/*
* Fetch the next instruction from rPC into rINST. Does not advance rPC.
*/
.macro FETCH_INST
lhu rINST, 0(rPC)
.endm
/* Advance rPC by some number of code units. */
.macro ADVANCE count
daddu rPC, rPC, (\count) * 2
.endm
/*
* Fetch the next instruction from an offset specified by _reg and advance xPC.
* xPC to point to the next instruction. "_reg" must specify the distance
* in bytes, *not* 16-bit code units, and may be a signed value. Must not set flags.
*
*/
.macro FETCH_ADVANCE_INST_RB reg
daddu rPC, rPC, \reg
FETCH_INST
.endm
/*
* Fetch the next instruction from the specified offset. Advances rPC
* to point to the next instruction.
*
* This must come AFTER anything that can throw an exception, or the
* exception catch may miss. (This also implies that it must come after
* EXPORT_PC.)
*/
.macro FETCH_ADVANCE_INST count
ADVANCE \count
FETCH_INST
.endm
/*
* Similar to FETCH_ADVANCE_INST, but does not update rPC. Used to load
* rINST ahead of possible exception point. Be sure to manually advance rPC
* later.
*/
.macro PREFETCH_INST count
lhu rINST, ((\count) * 2)(rPC)
.endm
/*
* Put the instruction's opcode field into the specified register.
*/
.macro GET_INST_OPCODE reg
and \reg, rINST, 255
.endm
/*
* Begin executing the opcode in _reg.
*/
.macro GOTO_OPCODE reg
.set noat
sll AT, \reg, 7
daddu AT, rIBASE, AT
jic AT, 0
.set at
.endm
/*
* Get/set the 32-bit value from a Dalvik register.
* Note, GET_VREG does sign extension to 64 bits while
* GET_VREG_U does zero extension to 64 bits.
* One is useful for arithmetic while the other is
* useful for storing the result value as 64-bit.
*/
.macro GET_VREG reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
lw \reg, 0(AT)
.set at
.endm
.macro GET_VREG_U reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
lwu \reg, 0(AT)
.set at
.endm
.macro GET_VREG_FLOAT reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
lwc1 \reg, 0(AT)
.set at
.endm
.macro SET_VREG reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
sw \reg, 0(AT)
dlsa AT, \vreg, rREFS, 2
sw zero, 0(AT)
.set at
.endm
.macro SET_VREG_OBJECT reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
sw \reg, 0(AT)
dlsa AT, \vreg, rREFS, 2
sw \reg, 0(AT)
.set at
.endm
.macro SET_VREG_FLOAT reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
swc1 \reg, 0(AT)
dlsa AT, \vreg, rREFS, 2
sw zero, 0(AT)
.set at
.endm
/*
* Get/set the 64-bit value from a Dalvik register.
* Avoid unaligned memory accesses.
* Note, SET_VREG_WIDE clobbers the register containing the value being stored.
* Note, SET_VREG_DOUBLE clobbers the register containing the Dalvik register number.
*/
.macro GET_VREG_WIDE reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
lw \reg, 0(AT)
lw AT, 4(AT)
dinsu \reg, AT, 32, 32
.set at
.endm
.macro GET_VREG_DOUBLE reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
lwc1 \reg, 0(AT)
lw AT, 4(AT)
mthc1 AT, \reg
.set at
.endm
.macro SET_VREG_WIDE reg, vreg
.set noat
dlsa AT, \vreg, rFP, 2
sw \reg, 0(AT)
drotr32 \reg, \reg, 0
sw \reg, 4(AT)
dlsa AT, \vreg, rREFS, 2
sw zero, 0(AT)
sw zero, 4(AT)
.set at
.endm
.macro SET_VREG_DOUBLE reg, vreg
.set noat
dlsa AT, \vreg, rREFS, 2
sw zero, 0(AT)
sw zero, 4(AT)
dlsa AT, \vreg, rFP, 2
swc1 \reg, 0(AT)
mfhc1 \vreg, \reg
sw \vreg, 4(AT)
.set at
.endm
/*
* On-stack offsets for spilling/unspilling callee-saved registers
* and the frame size.
*/
#define STACK_OFFSET_RA 0
#define STACK_OFFSET_GP 8
#define STACK_OFFSET_S0 16
#define STACK_OFFSET_S1 24
#define STACK_OFFSET_S2 32
#define STACK_OFFSET_S3 40
#define STACK_OFFSET_S4 48
#define STACK_OFFSET_S5 56
#define STACK_OFFSET_S6 64
#define STACK_SIZE 80 /* needs 16 byte alignment */
/* Constants for float/double_to_int/long conversions */
#define INT_MIN 0x80000000
#define INT_MIN_AS_FLOAT 0xCF000000
#define INT_MIN_AS_DOUBLE 0xC1E0000000000000
#define LONG_MIN 0x8000000000000000
#define LONG_MIN_AS_FLOAT 0xDF000000
#define LONG_MIN_AS_DOUBLE 0xC3E0000000000000
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Interpreter entry point.
*/
.set reorder
.text
.global ExecuteMterpImpl
.type ExecuteMterpImpl, %function
.balign 16
/*
* On entry:
* a0 Thread* self
* a1 dex_instructions
* a2 ShadowFrame
* a3 JValue* result_register
*
*/
ExecuteMterpImpl:
.cfi_startproc
.cpsetup t9, t8, ExecuteMterpImpl
.cfi_def_cfa sp, 0
daddu sp, sp, -STACK_SIZE
.cfi_adjust_cfa_offset STACK_SIZE
sd t8, STACK_OFFSET_GP(sp)
.cfi_rel_offset 28, STACK_OFFSET_GP
sd ra, STACK_OFFSET_RA(sp)
.cfi_rel_offset 31, STACK_OFFSET_RA
sd s0, STACK_OFFSET_S0(sp)
.cfi_rel_offset 16, STACK_OFFSET_S0
sd s1, STACK_OFFSET_S1(sp)
.cfi_rel_offset 17, STACK_OFFSET_S1
sd s2, STACK_OFFSET_S2(sp)
.cfi_rel_offset 18, STACK_OFFSET_S2
sd s3, STACK_OFFSET_S3(sp)
.cfi_rel_offset 19, STACK_OFFSET_S3
sd s4, STACK_OFFSET_S4(sp)
.cfi_rel_offset 20, STACK_OFFSET_S4
sd s5, STACK_OFFSET_S5(sp)
.cfi_rel_offset 21, STACK_OFFSET_S5
sd s6, STACK_OFFSET_S6(sp)
.cfi_rel_offset 22, STACK_OFFSET_S6
/* Remember the return register */
sd a3, SHADOWFRAME_RESULT_REGISTER_OFFSET(a2)
/* Remember the dex instruction pointer */
sd a1, SHADOWFRAME_DEX_INSTRUCTIONS_OFFSET(a2)
/* set up "named" registers */
move rSELF, a0
daddu rFP, a2, SHADOWFRAME_VREGS_OFFSET
lw v0, SHADOWFRAME_NUMBER_OF_VREGS_OFFSET(a2)
dlsa rREFS, v0, rFP, 2
lw v0, SHADOWFRAME_DEX_PC_OFFSET(a2)
dlsa rPC, v0, a1, 1
CFI_DEFINE_DEX_PC_WITH_OFFSET(CFI_TMP, CFI_DEX, 0)
EXPORT_PC
/* Starting ibase */
REFRESH_IBASE
/* Set up for backwards branches & osr profiling */
ld a0, OFF_FP_METHOD(rFP)
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rSELF
jal MterpSetUpHotnessCountdown
move rPROFILE, v0 # Starting hotness countdown to rPROFILE
/* start executing the instruction at rPC */
FETCH_INST
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* NOTE: no fallthrough */
.global artMterpAsmInstructionStart
artMterpAsmInstructionStart = .L_op_nop
.text
/* ------------------------------ */
.balign 128
.L_op_nop: /* 0x00 */
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move: /* 0x01 */
/* for move, move-object, long-to-int */
/* op vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 0
SET_VREG_OBJECT a0, a2 # vA <- vB
.else
SET_VREG a0, a2 # vA <- vB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_from16: /* 0x02 */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
lhu a3, 2(rPC) # a3 <- BBBB
srl a2, rINST, 8 # a2 <- AA
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vBBBB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 0
SET_VREG_OBJECT a0, a2 # vAA <- vBBBB
.else
SET_VREG a0, a2 # vAA <- vBBBB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_16: /* 0x03 */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
lhu a3, 4(rPC) # a3 <- BBBB
lhu a2, 2(rPC) # a2 <- AAAA
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vBBBB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 0
SET_VREG_OBJECT a0, a2 # vAAAA <- vBBBB
.else
SET_VREG a0, a2 # vAAAA <- vBBBB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide: /* 0x04 */
/* move-wide vA, vB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
ext a3, rINST, 12, 4 # a3 <- B
ext a2, rINST, 8, 4 # a2 <- A
GET_VREG_WIDE a0, a3 # a0 <- vB
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- vB
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide_from16: /* 0x05 */
/* move-wide/from16 vAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
lhu a3, 2(rPC) # a3 <- BBBB
srl a2, rINST, 8 # a2 <- AA
GET_VREG_WIDE a0, a3 # a0 <- vBBBB
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vAA <- vBBBB
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide_16: /* 0x06 */
/* move-wide/16 vAAAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
lhu a3, 4(rPC) # a3 <- BBBB
lhu a2, 2(rPC) # a2 <- AAAA
GET_VREG_WIDE a0, a3 # a0 <- vBBBB
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vAAAA <- vBBBB
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object: /* 0x07 */
/* for move, move-object, long-to-int */
/* op vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 1
SET_VREG_OBJECT a0, a2 # vA <- vB
.else
SET_VREG a0, a2 # vA <- vB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object_from16: /* 0x08 */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
lhu a3, 2(rPC) # a3 <- BBBB
srl a2, rINST, 8 # a2 <- AA
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vBBBB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 1
SET_VREG_OBJECT a0, a2 # vAA <- vBBBB
.else
SET_VREG a0, a2 # vAA <- vBBBB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object_16: /* 0x09 */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
lhu a3, 4(rPC) # a3 <- BBBB
lhu a2, 2(rPC) # a2 <- AAAA
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vBBBB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 1
SET_VREG_OBJECT a0, a2 # vAAAA <- vBBBB
.else
SET_VREG a0, a2 # vAAAA <- vBBBB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result: /* 0x0a */
/* for: move-result, move-result-object */
/* op vAA */
srl a2, rINST, 8 # a2 <- AA
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
ld a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
lw a0, 0(a0) # a0 <- result.i
GET_INST_OPCODE v0 # extract opcode from rINST
.if 0
SET_VREG_OBJECT a0, a2 # vAA <- result
.else
SET_VREG a0, a2 # vAA <- result
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result_wide: /* 0x0b */
/* for: move-result-wide */
/* op vAA */
srl a2, rINST, 8 # a2 <- AA
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
ld a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
ld a0, 0(a0) # a0 <- result.j
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vAA <- result
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result_object: /* 0x0c */
/* for: move-result, move-result-object */
/* op vAA */
srl a2, rINST, 8 # a2 <- AA
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
ld a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
lw a0, 0(a0) # a0 <- result.i
GET_INST_OPCODE v0 # extract opcode from rINST
.if 1
SET_VREG_OBJECT a0, a2 # vAA <- result
.else
SET_VREG a0, a2 # vAA <- result
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_exception: /* 0x0d */
/* move-exception vAA */
srl a2, rINST, 8 # a2 <- AA
ld a0, THREAD_EXCEPTION_OFFSET(rSELF) # load exception obj
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
SET_VREG_OBJECT a0, a2 # vAA <- exception obj
GET_INST_OPCODE v0 # extract opcode from rINST
sd zero, THREAD_EXCEPTION_OFFSET(rSELF) # clear exception
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_return_void: /* 0x0e */
.extern MterpThreadFenceForConstructor
.extern MterpSuspendCheck
jal MterpThreadFenceForConstructor
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, ra, THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
beqzc ra, 1f
jal MterpSuspendCheck # (self)
1:
li a0, 0
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return: /* 0x0f */
/*
* Return a 32-bit value.
*
* for: return (sign-extend), return-object (zero-extend)
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
.extern MterpSuspendCheck
jal MterpThreadFenceForConstructor
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, ra, THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
beqzc ra, 1f
jal MterpSuspendCheck # (self)
1:
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a2 # a0 <- vAA
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_wide: /* 0x10 */
/*
* Return a 64-bit value.
*/
/* return-wide vAA */
/* op vAA */
.extern MterpThreadFenceForConstructor
.extern MterpSuspendCheck
jal MterpThreadFenceForConstructor
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, ra, THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
beqzc ra, 1f
jal MterpSuspendCheck # (self)
1:
srl a2, rINST, 8 # a2 <- AA
GET_VREG_WIDE a0, a2 # a0 <- vAA
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_object: /* 0x11 */
/*
* Return a 32-bit value.
*
* for: return (sign-extend), return-object (zero-extend)
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
.extern MterpSuspendCheck
jal MterpThreadFenceForConstructor
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, ra, THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
beqzc ra, 1f
jal MterpSuspendCheck # (self)
1:
srl a2, rINST, 8 # a2 <- AA
GET_VREG_U a0, a2 # a0 <- vAA
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_const_4: /* 0x12 */
/* const/4 vA, #+B */
ext a2, rINST, 8, 4 # a2 <- A
seh a0, rINST # sign extend B in rINST
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
sra a0, a0, 12 # shift B into its final position
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- +B
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_16: /* 0x13 */
/* const/16 vAA, #+BBBB */
srl a2, rINST, 8 # a2 <- AA
lh a0, 2(rPC) # a0 <- sign-extended BBBB
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- +BBBB
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const: /* 0x14 */
/* const vAA, #+BBBBbbbb */
srl a2, rINST, 8 # a2 <- AA
lh a0, 2(rPC) # a0 <- bbbb (low)
lh a1, 4(rPC) # a1 <- BBBB (high)
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
ins a0, a1, 16, 16 # a0 = BBBBbbbb
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- +BBBBbbbb
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_high16: /* 0x15 */
/* const/high16 vAA, #+BBBB0000 */
srl a2, rINST, 8 # a2 <- AA
lh a0, 2(rPC) # a0 <- BBBB
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
sll a0, a0, 16 # a0 <- BBBB0000
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- +BBBB0000
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_16: /* 0x16 */
/* const-wide/16 vAA, #+BBBB */
srl a2, rINST, 8 # a2 <- AA
lh a0, 2(rPC) # a0 <- sign-extended BBBB
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vAA <- +BBBB
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_32: /* 0x17 */
/* const-wide/32 vAA, #+BBBBbbbb */
srl a2, rINST, 8 # a2 <- AA
lh a0, 2(rPC) # a0 <- bbbb (low)
lh a1, 4(rPC) # a1 <- BBBB (high)
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
ins a0, a1, 16, 16 # a0 = BBBBbbbb
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vAA <- +BBBBbbbb
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide: /* 0x18 */
/* const-wide vAA, #+HHHHhhhhBBBBbbbb */
srl a4, rINST, 8 # a4 <- AA
lh a0, 2(rPC) # a0 <- bbbb (low)
lh a1, 4(rPC) # a1 <- BBBB (low middle)
lh a2, 6(rPC) # a2 <- hhhh (high middle)
lh a3, 8(rPC) # a3 <- HHHH (high)
FETCH_ADVANCE_INST 5 # advance rPC, load rINST
ins a0, a1, 16, 16 # a0 = BBBBbbbb
ins a2, a3, 16, 16 # a2 = HHHHhhhh
dinsu a0, a2, 32, 32 # a0 = HHHHhhhhBBBBbbbb
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- +HHHHhhhhBBBBbbbb
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_high16: /* 0x19 */
/* const-wide/high16 vAA, #+BBBB000000000000 */
srl a2, rINST, 8 # a2 <- AA
lh a0, 2(rPC) # a0 <- BBBB
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
dsll32 a0, a0, 16 # a0 <- BBBB000000000000
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vAA <- +BBBB000000000000
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_string: /* 0x1a */
/* const/class vAA, type@BBBB */
/* const/method-handle vAA, method_handle@BBBB */
/* const/method-type vAA, proto@BBBB */
/* const/string vAA, string@@BBBB */
.extern MterpConstString
EXPORT_PC
lhu a0, 2(rPC) # a0 <- BBBB
srl a1, rINST, 8 # a1 <- AA
daddu a2, rFP, OFF_FP_SHADOWFRAME
move a3, rSELF
jal MterpConstString # (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 2 # load rINST
bnez v0, MterpPossibleException # let reference interpreter deal with it.
ADVANCE 2 # advance rPC
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_string_jumbo: /* 0x1b */
/* const/string vAA, String//BBBBBBBB */
.extern MterpConstString
EXPORT_PC
lh a0, 2(rPC) # a0 <- bbbb (low)
lh a4, 4(rPC) # a4 <- BBBB (high)
srl a1, rINST, 8 # a1 <- AA
ins a0, a4, 16, 16 # a0 <- BBBBbbbb
daddu a2, rFP, OFF_FP_SHADOWFRAME
move a3, rSELF
jal MterpConstString # (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 3 # load rINST
bnez v0, MterpPossibleException # let reference interpreter deal with it.
ADVANCE 3 # advance rPC
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_class: /* 0x1c */
/* const/class vAA, type@BBBB */
/* const/method-handle vAA, method_handle@BBBB */
/* const/method-type vAA, proto@BBBB */
/* const/string vAA, string@@BBBB */
.extern MterpConstClass
EXPORT_PC
lhu a0, 2(rPC) # a0 <- BBBB
srl a1, rINST, 8 # a1 <- AA
daddu a2, rFP, OFF_FP_SHADOWFRAME
move a3, rSELF
jal MterpConstClass # (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 2 # load rINST
bnez v0, MterpPossibleException # let reference interpreter deal with it.
ADVANCE 2 # advance rPC
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_monitor_enter: /* 0x1d */
/*
* Synchronize on an object.
*/
/* monitor-enter vAA */
.extern artLockObjectFromCode
EXPORT_PC
srl a2, rINST, 8 # a2 <- AA
GET_VREG_U a0, a2 # a0 <- vAA (object)
move a1, rSELF # a1 <- self
jal artLockObjectFromCode
bnezc v0, MterpException
FETCH_ADVANCE_INST 1
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_monitor_exit: /* 0x1e */
/*
* Unlock an object.
*
* Exceptions that occur when unlocking a monitor need to appear as
* if they happened at the following instruction. See the Dalvik
* instruction spec.
*/
/* monitor-exit vAA */
.extern artUnlockObjectFromCode
EXPORT_PC
srl a2, rINST, 8 # a2 <- AA
GET_VREG_U a0, a2 # a0 <- vAA (object)
move a1, rSELF # a1 <- self
jal artUnlockObjectFromCode # v0 <- success for unlock(self, obj)
bnezc v0, MterpException
FETCH_ADVANCE_INST 1 # before throw: advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_check_cast: /* 0x1f */
/*
* Check to see if a cast from one class to another is allowed.
*/
/* check-cast vAA, class//BBBB */
.extern MterpCheckCast
EXPORT_PC
lhu a0, 2(rPC) # a0 <- BBBB
srl a1, rINST, 8 # a1 <- AA
dlsa a1, a1, rFP, 2 # a1 <- &object
ld a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
jal MterpCheckCast # (index, &obj, method, self)
PREFETCH_INST 2
bnez v0, MterpPossibleException
ADVANCE 2
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_instance_of: /* 0x20 */
/*
* Check to see if an object reference is an instance of a class.
*
* Most common situation is a non-null object, being compared against
* an already-resolved class.
*/
/* instance-of vA, vB, class//CCCC */
.extern MterpInstanceOf
EXPORT_PC
lhu a0, 2(rPC) # a0 <- CCCC
srl a1, rINST, 12 # a1 <- B
dlsa a1, a1, rFP, 2 # a1 <- &object
ld a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
jal MterpInstanceOf # (index, &obj, method, self)
ld a1, THREAD_EXCEPTION_OFFSET(rSELF)
ext a2, rINST, 8, 4 # a2 <- A
PREFETCH_INST 2
bnez a1, MterpException
ADVANCE 2 # advance rPC
SET_VREG v0, a2 # vA <- v0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_array_length: /* 0x21 */
/*
* Return the length of an array.
*/
srl a1, rINST, 12 # a1 <- B
GET_VREG_U a0, a1 # a0 <- vB (object ref)
ext a2, rINST, 8, 4 # a2 <- A
beqz a0, common_errNullObject # yup, fail
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- array length
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a3, a2 # vB <- length
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_new_instance: /* 0x22 */
/*
* Create a new instance of a class.
*/
/* new-instance vAA, class//BBBB */
.extern MterpNewInstance
EXPORT_PC
daddu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rSELF
move a2, rINST
jal MterpNewInstance # (shadow_frame, self, inst_data)
beqzc v0, MterpPossibleException
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_new_array: /* 0x23 */
/*
* Allocate an array of objects, specified with the array class
* and a count.
*
* The verifier guarantees that this is an array class, so we don't
* check for it here.
*/
/* new-array vA, vB, class//CCCC */
.extern MterpNewArray
EXPORT_PC
daddu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
move a3, rSELF
jal MterpNewArray
beqzc v0, MterpPossibleException
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_filled_new_array: /* 0x24 */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class//CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type//BBBB */
.extern MterpFilledNewArray
EXPORT_PC
daddu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rSELF
jal MterpFilledNewArray
beqzc v0, MterpPossibleException
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_filled_new_array_range: /* 0x25 */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class//CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type//BBBB */
.extern MterpFilledNewArrayRange
EXPORT_PC
daddu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rSELF
jal MterpFilledNewArrayRange
beqzc v0, MterpPossibleException
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_fill_array_data: /* 0x26 */
/* fill-array-data vAA, +BBBBBBBB */
.extern MterpFillArrayData
EXPORT_PC
lh a1, 2(rPC) # a1 <- bbbb (lo)
lh a0, 4(rPC) # a0 <- BBBB (hi)
srl a3, rINST, 8 # a3 <- AA
ins a1, a0, 16, 16 # a1 <- BBBBbbbb
GET_VREG_U a0, a3 # a0 <- vAA (array object)
dlsa a1, a1, rPC, 1 # a1 <- PC + BBBBbbbb*2 (array data off.)
jal MterpFillArrayData # (obj, payload)
beqzc v0, MterpPossibleException # exception?
FETCH_ADVANCE_INST 3 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_throw: /* 0x27 */
/*
* Throw an exception object in the current thread.
*/
/* throw vAA */
EXPORT_PC
srl a2, rINST, 8 # a2 <- AA
GET_VREG_U a0, a2 # a0 <- vAA (exception object)
beqzc a0, common_errNullObject
sd a0, THREAD_EXCEPTION_OFFSET(rSELF) # thread->exception <- obj
b MterpException
/* ------------------------------ */
.balign 128
.L_op_goto: /* 0x28 */
/*
* Unconditional branch, 8-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto +AA */
srl rINST, rINST, 8
seb rINST, rINST # rINST <- offset (sign-extended AA)
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_goto_16: /* 0x29 */
/*
* Unconditional branch, 16-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto/16 +AAAA */
lh rINST, 2(rPC) # rINST <- offset (sign-extended AAAA)
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_goto_32: /* 0x2a */
/*
* Unconditional branch, 32-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*
* Unlike most opcodes, this one is allowed to branch to itself, so
* our "backward branch" test must be "<=0" instead of "<0".
*/
/* goto/32 +AAAAAAAA */
lh rINST, 2(rPC) # rINST <- aaaa (low)
lh a1, 4(rPC) # a1 <- AAAA (high)
ins rINST, a1, 16, 16 # rINST <- offset (sign-extended AAAAaaaa)
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_packed_switch: /* 0x2b */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBBBBBB */
.extern MterpDoPackedSwitch
lh a0, 2(rPC) # a0 <- bbbb (lo)
lh a1, 4(rPC) # a1 <- BBBB (hi)
srl a3, rINST, 8 # a3 <- AA
ins a0, a1, 16, 16 # a0 <- BBBBbbbb
GET_VREG a1, a3 # a1 <- vAA
dlsa a0, a0, rPC, 1 # a0 <- PC + BBBBbbbb*2
jal MterpDoPackedSwitch # v0 <- code-unit branch offset
move rINST, v0
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_sparse_switch: /* 0x2c */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBBBBBB */
.extern MterpDoSparseSwitch
lh a0, 2(rPC) # a0 <- bbbb (lo)
lh a1, 4(rPC) # a1 <- BBBB (hi)
srl a3, rINST, 8 # a3 <- AA
ins a0, a1, 16, 16 # a0 <- BBBBbbbb
GET_VREG a1, a3 # a1 <- vAA
dlsa a0, a0, rPC, 1 # a0 <- PC + BBBBbbbb*2
jal MterpDoSparseSwitch # v0 <- code-unit branch offset
move rINST, v0
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_cmpl_float: /* 0x2d */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* For: cmpl-float, cmpg-float
*/
/* op vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f0, a2 # f0 <- vBB
GET_VREG_FLOAT f1, a3 # f1 <- vCC
cmp.eq.s f2, f0, f1
li a0, 0
bc1nez f2, 1f # done if vBB == vCC (ordered)
.if 0
cmp.lt.s f2, f0, f1
li a0, -1
bc1nez f2, 1f # done if vBB < vCC (ordered)
li a0, 1 # vBB > vCC or unordered
.else
cmp.lt.s f2, f1, f0
li a0, 1
bc1nez f2, 1f # done if vBB > vCC (ordered)
li a0, -1 # vBB < vCC or unordered
.endif
1:
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmpg_float: /* 0x2e */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* For: cmpl-float, cmpg-float
*/
/* op vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f0, a2 # f0 <- vBB
GET_VREG_FLOAT f1, a3 # f1 <- vCC
cmp.eq.s f2, f0, f1
li a0, 0
bc1nez f2, 1f # done if vBB == vCC (ordered)
.if 1
cmp.lt.s f2, f0, f1
li a0, -1
bc1nez f2, 1f # done if vBB < vCC (ordered)
li a0, 1 # vBB > vCC or unordered
.else
cmp.lt.s f2, f1, f0
li a0, 1
bc1nez f2, 1f # done if vBB > vCC (ordered)
li a0, -1 # vBB < vCC or unordered
.endif
1:
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmpl_double: /* 0x2f */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* For: cmpl-double, cmpg-double
*/
/* op vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f0, a2 # f0 <- vBB
GET_VREG_DOUBLE f1, a3 # f1 <- vCC
cmp.eq.d f2, f0, f1
li a0, 0
bc1nez f2, 1f # done if vBB == vCC (ordered)
.if 0
cmp.lt.d f2, f0, f1
li a0, -1
bc1nez f2, 1f # done if vBB < vCC (ordered)
li a0, 1 # vBB > vCC or unordered
.else
cmp.lt.d f2, f1, f0
li a0, 1
bc1nez f2, 1f # done if vBB > vCC (ordered)
li a0, -1 # vBB < vCC or unordered
.endif
1:
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmpg_double: /* 0x30 */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* For: cmpl-double, cmpg-double
*/
/* op vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f0, a2 # f0 <- vBB
GET_VREG_DOUBLE f1, a3 # f1 <- vCC
cmp.eq.d f2, f0, f1
li a0, 0
bc1nez f2, 1f # done if vBB == vCC (ordered)
.if 1
cmp.lt.d f2, f0, f1
li a0, -1
bc1nez f2, 1f # done if vBB < vCC (ordered)
li a0, 1 # vBB > vCC or unordered
.else
cmp.lt.d f2, f1, f0
li a0, 1
bc1nez f2, 1f # done if vBB > vCC (ordered)
li a0, -1 # vBB < vCC or unordered
.endif
1:
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmp_long: /* 0x31 */
/* cmp-long vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
slt a2, a0, a1
slt a0, a1, a0
subu a0, a0, a2
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- result
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_eq: /* 0x32 */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-le" you would use "le".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
lh rINST, 2(rPC) # rINST <- offset (sign-extended CCCC)
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
beqc a0, a1, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ne: /* 0x33 */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-le" you would use "le".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
lh rINST, 2(rPC) # rINST <- offset (sign-extended CCCC)
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
bnec a0, a1, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_lt: /* 0x34 */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-le" you would use "le".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
lh rINST, 2(rPC) # rINST <- offset (sign-extended CCCC)
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
bltc a0, a1, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ge: /* 0x35 */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-le" you would use "le".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
lh rINST, 2(rPC) # rINST <- offset (sign-extended CCCC)
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
bgec a0, a1, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gt: /* 0x36 */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-le" you would use "le".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
lh rINST, 2(rPC) # rINST <- offset (sign-extended CCCC)
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
bgtc a0, a1, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_le: /* 0x37 */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-le" you would use "le".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
lh rINST, 2(rPC) # rINST <- offset (sign-extended CCCC)
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
blec a0, a1, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_eqz: /* 0x38 */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-lez" you would use "le".
*
* For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
srl a2, rINST, 8 # a2 <- AA
lh rINST, 2(rPC) # rINST <- offset (sign-extended BBBB)
GET_VREG a0, a2 # a0 <- vAA
beqzc a0, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_nez: /* 0x39 */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-lez" you would use "le".
*
* For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
srl a2, rINST, 8 # a2 <- AA
lh rINST, 2(rPC) # rINST <- offset (sign-extended BBBB)
GET_VREG a0, a2 # a0 <- vAA
bnezc a0, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ltz: /* 0x3a */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-lez" you would use "le".
*
* For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
srl a2, rINST, 8 # a2 <- AA
lh rINST, 2(rPC) # rINST <- offset (sign-extended BBBB)
GET_VREG a0, a2 # a0 <- vAA
bltzc a0, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gez: /* 0x3b */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-lez" you would use "le".
*
* For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
srl a2, rINST, 8 # a2 <- AA
lh rINST, 2(rPC) # rINST <- offset (sign-extended BBBB)
GET_VREG a0, a2 # a0 <- vAA
bgezc a0, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gtz: /* 0x3c */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-lez" you would use "le".
*
* For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
srl a2, rINST, 8 # a2 <- AA
lh rINST, 2(rPC) # rINST <- offset (sign-extended BBBB)
GET_VREG a0, a2 # a0 <- vAA
bgtzc a0, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_lez: /* 0x3d */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform, e.g. for
* "if-lez" you would use "le".
*
* For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
srl a2, rINST, 8 # a2 <- AA
lh rINST, 2(rPC) # rINST <- offset (sign-extended BBBB)
GET_VREG a0, a2 # a0 <- vAA
blezc a0, MterpCommonTakenBranchNoFlags
li v0, JIT_CHECK_OSR # possible OSR re-entry?
beqc rPROFILE, v0, .L_check_not_taken_osr
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_unused_3e: /* 0x3e */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_3f: /* 0x3f */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_40: /* 0x40 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_41: /* 0x41 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_42: /* 0x42 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_43: /* 0x43 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_aget: /* 0x44 */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 2
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 2 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
lw a2, MIRROR_INT_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a2, a4 # vAA <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_wide: /* 0x45 */
/*
* Array get, 64 bits. vAA <- vBB[vCC].
*
*/
/* aget-wide vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
dlsa a0, a1, a0, 3 # a0 <- arrayObj + index*width
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
lw a2, MIRROR_WIDE_ARRAY_DATA_OFFSET(a0)
lw a3, (MIRROR_WIDE_ARRAY_DATA_OFFSET+4)(a0)
dinsu a2, a3, 32, 32 # a2 <- vBB[vCC]
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a2, a4 # vAA <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_object: /* 0x46 */
/*
* Array object get. vAA <- vBB[vCC].
*
* for: aget-object
*/
/* op vAA, vBB, vCC */
.extern artAGetObjectFromMterp
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
EXPORT_PC
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
jal artAGetObjectFromMterp # (array, index)
ld a1, THREAD_EXCEPTION_OFFSET(rSELF)
srl a4, rINST, 8 # a4 <- AA
PREFETCH_INST 2
bnez a1, MterpException
SET_VREG_OBJECT v0, a4 # vAA <- v0
ADVANCE 2
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_boolean: /* 0x47 */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 0
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
lbu a2, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a2, a4 # vAA <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_byte: /* 0x48 */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 0
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
lb a2, MIRROR_BYTE_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a2, a4 # vAA <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_char: /* 0x49 */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 1
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
lhu a2, MIRROR_CHAR_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a2, a4 # vAA <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_short: /* 0x4a */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 1
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
lh a2, MIRROR_SHORT_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a2, a4 # vAA <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput: /* 0x4b */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 2
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 2 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a2, a4 # a2 <- vAA
GET_INST_OPCODE v0 # extract opcode from rINST
sw a2, MIRROR_INT_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_wide: /* 0x4c */
/*
* Array put, 64 bits. vBB[vCC] <- vAA.
*
*/
/* aput-wide vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
dlsa a0, a1, a0, 3 # a0 <- arrayObj + index*width
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
GET_VREG_WIDE a2, a4 # a2 <- vAA
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
sw a2, MIRROR_WIDE_ARRAY_DATA_OFFSET(a0)
dsrl32 a2, a2, 0
sw a2, (MIRROR_WIDE_ARRAY_DATA_OFFSET+4)(a0) # vBB[vCC] <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_object: /* 0x4d */
/*
* Store an object into an array. vBB[vCC] <- vAA.
*/
/* op vAA, vBB, vCC */
.extern MterpAputObject
EXPORT_PC
daddu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
jal MterpAputObject
beqzc v0, MterpPossibleException
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_boolean: /* 0x4e */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 0
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a2, a4 # a2 <- vAA
GET_INST_OPCODE v0 # extract opcode from rINST
sb a2, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_byte: /* 0x4f */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 0
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a2, a4 # a2 <- vAA
GET_INST_OPCODE v0 # extract opcode from rINST
sb a2, MIRROR_BYTE_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_char: /* 0x50 */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 1
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a2, a4 # a2 <- vAA
GET_INST_OPCODE v0 # extract opcode from rINST
sh a2, MIRROR_CHAR_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_short: /* 0x51 */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
srl a4, rINST, 8 # a4 <- AA
GET_VREG_U a0, a2 # a0 <- vBB (array object)
GET_VREG a1, a3 # a1 <- vCC (requested index)
beqz a0, common_errNullObject # bail if null array object
lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
.if 1
# [d]lsa does not support shift count of 0.
dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
.else
daddu a0, a1, a0 # a0 <- arrayObj + index*width
.endif
bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_VREG a2, a4 # a2 <- vAA
GET_INST_OPCODE v0 # extract opcode from rINST
sh a2, MIRROR_SHORT_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget: /* 0x52 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iget_wide: /* 0x53 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iget_object: /* 0x54 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iget_boolean: /* 0x55 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iget_byte: /* 0x56 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iget_char: /* 0x57 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iget_short: /* 0x58 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput: /* 0x59 */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput_wide: /* 0x5a */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput_object: /* 0x5b */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput_boolean: /* 0x5c */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput_byte: /* 0x5d */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput_char: /* 0x5e */
TODO
/* ------------------------------ */
.balign 128
.L_op_iput_short: /* 0x5f */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget: /* 0x60 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget_wide: /* 0x61 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget_object: /* 0x62 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget_boolean: /* 0x63 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget_byte: /* 0x64 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget_char: /* 0x65 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sget_short: /* 0x66 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput: /* 0x67 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput_wide: /* 0x68 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput_object: /* 0x69 */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput_boolean: /* 0x6a */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput_byte: /* 0x6b */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput_char: /* 0x6c */
TODO
/* ------------------------------ */
.balign 128
.L_op_sput_short: /* 0x6d */
TODO
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual: /* 0x6e */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtual
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeVirtual
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_invoke_super: /* 0x6f */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeSuper
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeSuper
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_invoke_direct: /* 0x70 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeDirect
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeDirect
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_static: /* 0x71 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeStatic
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeStatic
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_interface: /* 0x72 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeInterface
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeInterface
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_return_void_no_barrier: /* 0x73 */
.extern MterpSuspendCheck
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, ra, THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
beqzc ra, 1f
jal MterpSuspendCheck # (self)
1:
li a0, 0
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range: /* 0x74 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeVirtualRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_super_range: /* 0x75 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeSuperRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeSuperRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_direct_range: /* 0x76 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeDirectRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeDirectRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_static_range: /* 0x77 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeStaticRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeStaticRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_interface_range: /* 0x78 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeInterfaceRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeInterfaceRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_unused_79: /* 0x79 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_7a: /* 0x7a */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_neg_int: /* 0x7b */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* for: int-to-byte, int-to-char, int-to-short,
* not-int, neg-int
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
subu a0, zero, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_not_int: /* 0x7c */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* for: int-to-byte, int-to-char, int-to-short,
* not-int, neg-int
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
nor a0, zero, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_neg_long: /* 0x7d */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* For: not-long, neg-long
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
dsubu a0, zero, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_not_long: /* 0x7e */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* For: not-long, neg-long
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
nor a0, zero, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_neg_float: /* 0x7f */
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_FLOAT f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
neg.s f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_neg_double: /* 0x80 */
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_DOUBLE f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
neg.d f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_long: /* 0x81 */
/* int-to-long vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB (sign-extended to 64 bits)
ext a2, rINST, 8, 4 # a2 <- A
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- vB
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_float: /* 0x82 */
/*
* Conversion from or to floating-point happens in a floating-point register.
* Therefore we load the input and store the output into or from a
* floating-point register irrespective of the type.
*/
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_FLOAT f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
cvt.s.w f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_double: /* 0x83 */
/*
* Conversion from or to floating-point happens in a floating-point register.
* Therefore we load the input and store the output into or from a
* floating-point register irrespective of the type.
*/
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_FLOAT f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
cvt.d.w f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_int: /* 0x84 */
/* we ignore the high word, making this equivalent to a 32-bit reg move */
/* for move, move-object, long-to-int */
/* op vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_VREG a0, a3 # a0 <- vB
GET_INST_OPCODE v0 # extract opcode from rINST
.if 0
SET_VREG_OBJECT a0, a2 # vA <- vB
.else
SET_VREG a0, a2 # vA <- vB
.endif
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_float: /* 0x85 */
/*
* Conversion from or to floating-point happens in a floating-point register.
* Therefore we load the input and store the output into or from a
* floating-point register irrespective of the type.
*/
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_DOUBLE f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
cvt.s.l f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_double: /* 0x86 */
/*
* Conversion from or to floating-point happens in a floating-point register.
* Therefore we load the input and store the output into or from a
* floating-point register irrespective of the type.
*/
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_DOUBLE f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
cvt.d.l f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_float_to_int: /* 0x87 */
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_FLOAT f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
trunc.w.s f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_float_to_long: /* 0x88 */
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_FLOAT f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
trunc.l.s f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_float_to_double: /* 0x89 */
/*
* Conversion from or to floating-point happens in a floating-point register.
* Therefore we load the input and store the output into or from a
* floating-point register irrespective of the type.
*/
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_FLOAT f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
cvt.d.s f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_double_to_int: /* 0x8a */
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_DOUBLE f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
trunc.w.d f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_double_to_long: /* 0x8b */
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_DOUBLE f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
trunc.l.d f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_double_to_float: /* 0x8c */
/*
* Conversion from or to floating-point happens in a floating-point register.
* Therefore we load the input and store the output into or from a
* floating-point register irrespective of the type.
*/
/*
* Loads a specified register from vB. Used primarily for conversions
* from or to a floating-point type.
*
* Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
* store the result in vA and jump to the next instruction.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*/
ext a1, rINST, 8, 4 # a1 <- A
srl a2, rINST, 12 # a2 <- B
GET_VREG_DOUBLE f0, a2
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
cvt.s.d f0, f0
/*
* Stores a specified register containing the result of conversion
* from or to a floating-point type and jumps to the next instruction.
*
* Expects a1 to contain the destination Dalvik register number.
* a1 is set up by fcvtHeader.S.
*
* For: int-to-float, int-to-double, long-to-float, long-to-double,
* float-to-int, float-to-long, float-to-double, double-to-int,
* double-to-long, double-to-float, neg-float, neg-double.
*
* Note that this file can't be included after a break in other files
* and in those files its contents appear as a copy.
* See: float-to-int, float-to-long, double-to-int, double-to-long.
*/
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a1
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_byte: /* 0x8d */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* for: int-to-byte, int-to-char, int-to-short,
* not-int, neg-int
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
seb a0, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_char: /* 0x8e */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* for: int-to-byte, int-to-char, int-to-short,
* not-int, neg-int
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
and a0, a0, 0xffff # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_short: /* 0x8f */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "a0 = op a0".
*
* for: int-to-byte, int-to-char, int-to-short,
* not-int, neg-int
*/
/* unop vA, vB */
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
ext a2, rINST, 8, 4 # a2 <- A
# optional op
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
seh a0, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_int: /* 0x90 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_int: /* 0x91 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
subu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_int: /* 0x92 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_int: /* 0x93 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_int: /* 0x94 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_and_int: /* 0x95 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_or_int: /* 0x96 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_xor_int: /* 0x97 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shl_int: /* 0x98 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
sll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_int: /* 0x99 */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
sra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_int: /* 0x9a */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG a0, a2 # a0 <- vBB
GET_VREG a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
srl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_long: /* 0x9b */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
daddu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_long: /* 0x9c */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
dsubu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_long: /* 0x9d */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
dmul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_long: /* 0x9e */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
ddiv a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_long: /* 0x9f */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
dmod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_and_long: /* 0xa0 */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_or_long: /* 0xa1 */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_xor_long: /* 0xa2 */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shl_long: /* 0xa3 */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
dsll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_long: /* 0xa4 */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
dsra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_long: /* 0xa5 */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
* xor-long, shl-long, shr-long, ushr-long
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_WIDE a0, a2 # a0 <- vBB
GET_VREG_WIDE a1, a3 # a1 <- vCC
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
dsrl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a4 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_float: /* 0xa6 */
/*:
* Generic 32-bit floating-point operation.
*
* For: add-float, sub-float, mul-float, div-float.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f0, a2 # f0 <- vBB
GET_VREG_FLOAT f1, a3 # f1 <- vCC
add.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_float: /* 0xa7 */
/*:
* Generic 32-bit floating-point operation.
*
* For: add-float, sub-float, mul-float, div-float.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f0, a2 # f0 <- vBB
GET_VREG_FLOAT f1, a3 # f1 <- vCC
sub.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_float: /* 0xa8 */
/*:
* Generic 32-bit floating-point operation.
*
* For: add-float, sub-float, mul-float, div-float.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f0, a2 # f0 <- vBB
GET_VREG_FLOAT f1, a3 # f1 <- vCC
mul.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_float: /* 0xa9 */
/*:
* Generic 32-bit floating-point operation.
*
* For: add-float, sub-float, mul-float, div-float.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f0, a2 # f0 <- vBB
GET_VREG_FLOAT f1, a3 # f1 <- vCC
div.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_float: /* 0xaa */
/* rem-float vAA, vBB, vCC */
.extern fmodf
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_FLOAT f12, a2 # f12 <- vBB
GET_VREG_FLOAT f13, a3 # f13 <- vCC
jal fmodf # f0 <- f12 op f13
srl a4, rINST, 8 # a4 <- AA
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_double: /* 0xab */
/*:
* Generic 64-bit floating-point operation.
*
* For: add-double, sub-double, mul-double, div-double.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f0, a2 # f0 <- vBB
GET_VREG_DOUBLE f1, a3 # f1 <- vCC
add.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_double: /* 0xac */
/*:
* Generic 64-bit floating-point operation.
*
* For: add-double, sub-double, mul-double, div-double.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f0, a2 # f0 <- vBB
GET_VREG_DOUBLE f1, a3 # f1 <- vCC
sub.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_double: /* 0xad */
/*:
* Generic 64-bit floating-point operation.
*
* For: add-double, sub-double, mul-double, div-double.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f0, a2 # f0 <- vBB
GET_VREG_DOUBLE f1, a3 # f1 <- vCC
mul.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_double: /* 0xae */
/*:
* Generic 64-bit floating-point operation.
*
* For: add-double, sub-double, mul-double, div-double.
* form: <op> f0, f0, f1
*/
/* binop vAA, vBB, vCC */
srl a4, rINST, 8 # a4 <- AA
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f0, a2 # f0 <- vBB
GET_VREG_DOUBLE f1, a3 # f1 <- vCC
div.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_double: /* 0xaf */
/* rem-double vAA, vBB, vCC */
.extern fmod
lbu a2, 2(rPC) # a2 <- BB
lbu a3, 3(rPC) # a3 <- CC
GET_VREG_DOUBLE f12, a2 # f12 <- vBB
GET_VREG_DOUBLE f13, a3 # f13 <- vCC
jal fmod # f0 <- f12 op f13
srl a4, rINST, 8 # a4 <- AA
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a4 # vAA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_int_2addr: /* 0xb0 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_int_2addr: /* 0xb1 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
subu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_int_2addr: /* 0xb2 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_int_2addr: /* 0xb3 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_int_2addr: /* 0xb4 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_and_int_2addr: /* 0xb5 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_or_int_2addr: /* 0xb6 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_xor_int_2addr: /* 0xb7 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shl_int_2addr: /* 0xb8 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
sll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_int_2addr: /* 0xb9 */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
sra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_int_2addr: /* 0xba */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a2 # a0 <- vA
GET_VREG a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
srl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_long_2addr: /* 0xbb */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
daddu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_long_2addr: /* 0xbc */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
dsubu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_long_2addr: /* 0xbd */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
dmul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_long_2addr: /* 0xbe */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
ddiv a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_long_2addr: /* 0xbf */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
dmod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_and_long_2addr: /* 0xc0 */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_or_long_2addr: /* 0xc1 */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_xor_long_2addr: /* 0xc2 */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shl_long_2addr: /* 0xc3 */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
dsll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_long_2addr: /* 0xc4 */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
dsra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_long_2addr: /* 0xc5 */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vB (a1). Useful for integer division and modulus. Note that we
* *don't* check for (LONG_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
* rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
* shl-long/2addr, shr-long/2addr, ushr-long/2addr
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_WIDE a0, a2 # a0 <- vA
GET_VREG_WIDE a1, a3 # a1 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
# optional op
dsrl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_WIDE a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_float_2addr: /* 0xc6 */
/*:
* Generic 32-bit "/2addr" floating-point operation.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_FLOAT f0, a2 # f0 <- vA
GET_VREG_FLOAT f1, a3 # f1 <- vB
add.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_float_2addr: /* 0xc7 */
/*:
* Generic 32-bit "/2addr" floating-point operation.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_FLOAT f0, a2 # f0 <- vA
GET_VREG_FLOAT f1, a3 # f1 <- vB
sub.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_float_2addr: /* 0xc8 */
/*:
* Generic 32-bit "/2addr" floating-point operation.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_FLOAT f0, a2 # f0 <- vA
GET_VREG_FLOAT f1, a3 # f1 <- vB
mul.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_float_2addr: /* 0xc9 */
/*:
* Generic 32-bit "/2addr" floating-point operation.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_FLOAT f0, a2 # f0 <- vA
GET_VREG_FLOAT f1, a3 # f1 <- vB
div.s f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_float_2addr: /* 0xca */
/* rem-float/2addr vA, vB */
.extern fmodf
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_FLOAT f12, a2 # f12 <- vA
GET_VREG_FLOAT f13, a3 # f13 <- vB
jal fmodf # f0 <- f12 op f13
ext a2, rINST, 8, 4 # a2 <- A
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_FLOAT f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_double_2addr: /* 0xcb */
/*:
* Generic 64-bit "/2addr" floating-point operation.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_DOUBLE f0, a2 # f0 <- vA
GET_VREG_DOUBLE f1, a3 # f1 <- vB
add.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_double_2addr: /* 0xcc */
/*:
* Generic 64-bit "/2addr" floating-point operation.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_DOUBLE f0, a2 # f0 <- vA
GET_VREG_DOUBLE f1, a3 # f1 <- vB
sub.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_double_2addr: /* 0xcd */
/*:
* Generic 64-bit "/2addr" floating-point operation.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_DOUBLE f0, a2 # f0 <- vA
GET_VREG_DOUBLE f1, a3 # f1 <- vB
mul.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_double_2addr: /* 0xce */
/*:
* Generic 64-bit "/2addr" floating-point operation.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
* form: <op> f0, f0, f1
*/
/* binop/2addr vA, vB */
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_DOUBLE f0, a2 # f0 <- vA
GET_VREG_DOUBLE f1, a3 # f1 <- vB
div.d f0, f0, f1 # f0 <- f0 op f1
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_double_2addr: /* 0xcf */
/* rem-double/2addr vA, vB */
.extern fmod
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG_DOUBLE f12, a2 # f12 <- vA
GET_VREG_DOUBLE f13, a3 # f13 <- vB
jal fmod # f0 <- f12 op f13
ext a2, rINST, 8, 4 # a2 <- A
FETCH_ADVANCE_INST 1 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG_DOUBLE f0, a2 # vA <- f0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_int_lit16: /* 0xd0 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rsub_int: /* 0xd1 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
subu a0, a1, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit16: /* 0xd2 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_int_lit16: /* 0xd3 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit16: /* 0xd4 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_and_int_lit16: /* 0xd5 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_or_int_lit16: /* 0xd6 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit16: /* 0xd7 */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CCCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
lh a1, 2(rPC) # a1 <- sign-extended CCCC
ext a2, rINST, 8, 4 # a2 <- A
ext a3, rINST, 12, 4 # a3 <- B
GET_VREG a0, a3 # a0 <- vB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_int_lit8: /* 0xd8 */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rsub_int_lit8: /* 0xd9 */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
subu a0, a1, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit8: /* 0xda */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_int_lit8: /* 0xdb */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit8: /* 0xdc */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 1
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_and_int_lit8: /* 0xdd */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_or_int_lit8: /* 0xde */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit8: /* 0xdf */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shl_int_lit8: /* 0xe0 */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
sll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_int_lit8: /* 0xe1 */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
sra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_int_lit8: /* 0xe2 */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* CC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
lbu a3, 2(rPC) # a3 <- BB
lb a1, 3(rPC) # a1 <- sign-extended CC
srl a2, rINST, 8 # a2 <- AA
GET_VREG a0, a3 # a0 <- vBB
.if 0
beqz a1, common_errDivideByZero # is second operand zero?
.endif
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
# optional op
srl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE v0 # extract opcode from rINST
SET_VREG a0, a2 # vAA <- a0
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_quick: /* 0xe3 */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- object we're operating on
ext a4, rINST, 8, 4 # a4 <- A
daddu a1, a1, a3
beqz a3, common_errNullObject # object was null
lw a0, 0(a1) # a0 <- obj.field
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
SET_VREG a0, a4 # fp[A] <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_wide_quick: /* 0xe4 */
/* iget-wide-quick vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a4, 2(rPC) # a4 <- field byte offset
GET_VREG_U a3, a2 # a3 <- object we're operating on
ext a2, rINST, 8, 4 # a2 <- A
beqz a3, common_errNullObject # object was null
daddu a4, a3, a4 # create direct pointer
lw a0, 0(a4)
lw a1, 4(a4)
dinsu a0, a1, 32, 32
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
SET_VREG_WIDE a0, a2
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_object_quick: /* 0xe5 */
/* For: iget-object-quick */
/* op vA, vB, offset//CCCC */
.extern artIGetObjectFromMterp
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
EXPORT_PC
GET_VREG_U a0, a2 # a0 <- object we're operating on
jal artIGetObjectFromMterp # (obj, offset)
ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
ext a2, rINST, 8, 4 # a2 <- A
PREFETCH_INST 2
bnez a3, MterpPossibleException # bail out
SET_VREG_OBJECT v0, a2 # fp[A] <- v0
ADVANCE 2 # advance rPC
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_quick: /* 0xe6 */
/* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
ext a2, rINST, 8, 4 # a2 <- A
beqz a3, common_errNullObject # object was null
GET_VREG a0, a2 # a0 <- fp[A]
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
daddu a1, a1, a3
sw a0, 0(a1) # obj.field <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_wide_quick: /* 0xe7 */
/* iput-wide-quick vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a3, 2(rPC) # a3 <- field byte offset
GET_VREG_U a2, a2 # a2 <- fp[B], the object pointer
ext a0, rINST, 8, 4 # a0 <- A
beqz a2, common_errNullObject # object was null
GET_VREG_WIDE a0, a0 # a0 <- fp[A]
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
daddu a1, a2, a3 # create a direct pointer
sw a0, 0(a1)
dsrl32 a0, a0, 0
sw a0, 4(a1)
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_object_quick: /* 0xe8 */
.extern MterpIputObjectQuick
EXPORT_PC
daddu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
jal MterpIputObjectQuick
beqzc v0, MterpException
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_quick: /* 0xe9 */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualQuick
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeVirtualQuick
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range_quick: /* 0xea */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualQuickRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeVirtualQuickRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_iput_boolean_quick: /* 0xeb */
/* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
ext a2, rINST, 8, 4 # a2 <- A
beqz a3, common_errNullObject # object was null
GET_VREG a0, a2 # a0 <- fp[A]
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
daddu a1, a1, a3
sb a0, 0(a1) # obj.field <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_byte_quick: /* 0xec */
/* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
ext a2, rINST, 8, 4 # a2 <- A
beqz a3, common_errNullObject # object was null
GET_VREG a0, a2 # a0 <- fp[A]
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
daddu a1, a1, a3
sb a0, 0(a1) # obj.field <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_char_quick: /* 0xed */
/* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
ext a2, rINST, 8, 4 # a2 <- A
beqz a3, common_errNullObject # object was null
GET_VREG a0, a2 # a0 <- fp[A]
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
daddu a1, a1, a3
sh a0, 0(a1) # obj.field <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_short_quick: /* 0xee */
/* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
ext a2, rINST, 8, 4 # a2 <- A
beqz a3, common_errNullObject # object was null
GET_VREG a0, a2 # a0 <- fp[A]
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
daddu a1, a1, a3
sh a0, 0(a1) # obj.field <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_boolean_quick: /* 0xef */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- object we're operating on
ext a4, rINST, 8, 4 # a4 <- A
daddu a1, a1, a3
beqz a3, common_errNullObject # object was null
lbu a0, 0(a1) # a0 <- obj.field
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
SET_VREG a0, a4 # fp[A] <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_byte_quick: /* 0xf0 */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- object we're operating on
ext a4, rINST, 8, 4 # a4 <- A
daddu a1, a1, a3
beqz a3, common_errNullObject # object was null
lb a0, 0(a1) # a0 <- obj.field
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
SET_VREG a0, a4 # fp[A] <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_char_quick: /* 0xf1 */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- object we're operating on
ext a4, rINST, 8, 4 # a4 <- A
daddu a1, a1, a3
beqz a3, common_errNullObject # object was null
lhu a0, 0(a1) # a0 <- obj.field
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
SET_VREG a0, a4 # fp[A] <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_short_quick: /* 0xf2 */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset//CCCC */
srl a2, rINST, 12 # a2 <- B
lhu a1, 2(rPC) # a1 <- field byte offset
GET_VREG_U a3, a2 # a3 <- object we're operating on
ext a4, rINST, 8, 4 # a4 <- A
daddu a1, a1, a3
beqz a3, common_errNullObject # object was null
lh a0, 0(a1) # a0 <- obj.field
FETCH_ADVANCE_INST 2 # advance rPC, load rINST
SET_VREG a0, a4 # fp[A] <- a0
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_unused_f3: /* 0xf3 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f4: /* 0xf4 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f5: /* 0xf5 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f6: /* 0xf6 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f7: /* 0xf7 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f8: /* 0xf8 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f9: /* 0xf9 */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_polymorphic: /* 0xfa */
/*
* invoke-polymorphic handler wrapper.
*/
/* op {vC, vD, vE, vF, vG}, meth@BBBB, proto@HHHH */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB, proto@HHHH */
.extern MterpInvokePolymorphic
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokePolymorphic
beqzc v0, MterpException
FETCH_ADVANCE_INST 4
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_polymorphic_range: /* 0xfb */
/*
* invoke-polymorphic handler wrapper.
*/
/* op {vC, vD, vE, vF, vG}, meth@BBBB, proto@HHHH */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB, proto@HHHH */
.extern MterpInvokePolymorphicRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokePolymorphicRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 4
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_custom: /* 0xfc */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeCustom
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeCustom
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_invoke_custom_range: /* 0xfd */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeCustomRange
.extern MterpShouldSwitchInterpreters
EXPORT_PC
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
jal MterpInvokeCustomRange
beqzc v0, MterpException
FETCH_ADVANCE_INST 3
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* ------------------------------ */
.balign 128
.L_op_const_method_handle: /* 0xfe */
/* const/class vAA, type@BBBB */
/* const/method-handle vAA, method_handle@BBBB */
/* const/method-type vAA, proto@BBBB */
/* const/string vAA, string@@BBBB */
.extern MterpConstMethodHandle
EXPORT_PC
lhu a0, 2(rPC) # a0 <- BBBB
srl a1, rINST, 8 # a1 <- AA
daddu a2, rFP, OFF_FP_SHADOWFRAME
move a3, rSELF
jal MterpConstMethodHandle # (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 2 # load rINST
bnez v0, MterpPossibleException # let reference interpreter deal with it.
ADVANCE 2 # advance rPC
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_method_type: /* 0xff */
/* const/class vAA, type@BBBB */
/* const/method-handle vAA, method_handle@BBBB */
/* const/method-type vAA, proto@BBBB */
/* const/string vAA, string@@BBBB */
.extern MterpConstMethodType
EXPORT_PC
lhu a0, 2(rPC) # a0 <- BBBB
srl a1, rINST, 8 # a1 <- AA
daddu a2, rFP, OFF_FP_SHADOWFRAME
move a3, rSELF
jal MterpConstMethodType # (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 2 # load rINST
bnez v0, MterpPossibleException # let reference interpreter deal with it.
ADVANCE 2 # advance rPC
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
.balign 128
.global artMterpAsmInstructionEnd
artMterpAsmInstructionEnd:
.global artMterpAsmSisterStart
.text
.balign 4
artMterpAsmSisterStart:
.global artMterpAsmSisterEnd
artMterpAsmSisterEnd:
.global artMterpAsmAltInstructionStart
artMterpAsmAltInstructionStart = .L_ALT_op_nop
.text
/* ------------------------------ */
.balign 128
.L_ALT_op_nop: /* 0x00 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (0 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move: /* 0x01 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (1 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_from16: /* 0x02 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (2 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_16: /* 0x03 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (3 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide: /* 0x04 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (4 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_from16: /* 0x05 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (5 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_16: /* 0x06 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (6 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object: /* 0x07 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (7 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_from16: /* 0x08 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (8 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_16: /* 0x09 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (9 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result: /* 0x0a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (10 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_wide: /* 0x0b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (11 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_object: /* 0x0c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (12 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_exception: /* 0x0d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (13 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void: /* 0x0e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (14 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return: /* 0x0f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (15 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_wide: /* 0x10 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (16 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_object: /* 0x11 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (17 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_4: /* 0x12 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (18 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_16: /* 0x13 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (19 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const: /* 0x14 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (20 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_high16: /* 0x15 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (21 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_16: /* 0x16 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (22 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_32: /* 0x17 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (23 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide: /* 0x18 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (24 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_high16: /* 0x19 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (25 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string: /* 0x1a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (26 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string_jumbo: /* 0x1b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (27 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_class: /* 0x1c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (28 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_enter: /* 0x1d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (29 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_exit: /* 0x1e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (30 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_check_cast: /* 0x1f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (31 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_instance_of: /* 0x20 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (32 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_array_length: /* 0x21 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (33 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_new_instance: /* 0x22 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (34 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_new_array: /* 0x23 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (35 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array: /* 0x24 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (36 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array_range: /* 0x25 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (37 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_fill_array_data: /* 0x26 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (38 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_throw: /* 0x27 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (39 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_goto: /* 0x28 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (40 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_16: /* 0x29 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (41 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_32: /* 0x2a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (42 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_packed_switch: /* 0x2b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (43 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sparse_switch: /* 0x2c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (44 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_float: /* 0x2d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (45 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_float: /* 0x2e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (46 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_double: /* 0x2f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (47 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_double: /* 0x30 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (48 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmp_long: /* 0x31 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (49 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eq: /* 0x32 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (50 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ne: /* 0x33 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (51 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lt: /* 0x34 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (52 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ge: /* 0x35 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (53 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gt: /* 0x36 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (54 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_le: /* 0x37 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (55 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eqz: /* 0x38 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (56 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_nez: /* 0x39 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (57 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ltz: /* 0x3a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (58 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gez: /* 0x3b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (59 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gtz: /* 0x3c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (60 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lez: /* 0x3d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (61 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3e: /* 0x3e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (62 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3f: /* 0x3f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (63 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_40: /* 0x40 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (64 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_41: /* 0x41 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (65 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_42: /* 0x42 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (66 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_43: /* 0x43 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (67 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget: /* 0x44 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (68 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_wide: /* 0x45 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (69 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_object: /* 0x46 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (70 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_boolean: /* 0x47 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (71 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_byte: /* 0x48 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (72 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_char: /* 0x49 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (73 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_short: /* 0x4a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (74 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput: /* 0x4b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (75 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_wide: /* 0x4c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (76 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_object: /* 0x4d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (77 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_boolean: /* 0x4e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (78 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_byte: /* 0x4f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (79 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_char: /* 0x50 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (80 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_short: /* 0x51 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (81 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget: /* 0x52 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (82 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide: /* 0x53 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (83 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object: /* 0x54 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (84 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean: /* 0x55 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (85 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte: /* 0x56 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (86 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char: /* 0x57 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (87 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short: /* 0x58 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (88 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput: /* 0x59 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (89 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide: /* 0x5a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (90 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object: /* 0x5b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (91 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean: /* 0x5c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (92 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte: /* 0x5d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (93 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char: /* 0x5e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (94 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short: /* 0x5f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (95 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget: /* 0x60 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (96 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_wide: /* 0x61 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (97 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_object: /* 0x62 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (98 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_boolean: /* 0x63 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (99 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_byte: /* 0x64 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (100 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_char: /* 0x65 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (101 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_short: /* 0x66 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (102 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput: /* 0x67 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (103 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_wide: /* 0x68 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (104 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_object: /* 0x69 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (105 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_boolean: /* 0x6a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (106 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_byte: /* 0x6b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (107 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_char: /* 0x6c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (108 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_short: /* 0x6d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (109 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual: /* 0x6e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (110 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super: /* 0x6f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (111 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct: /* 0x70 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (112 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static: /* 0x71 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (113 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface: /* 0x72 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (114 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void_no_barrier: /* 0x73 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (115 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range: /* 0x74 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (116 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super_range: /* 0x75 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (117 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct_range: /* 0x76 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (118 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static_range: /* 0x77 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (119 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface_range: /* 0x78 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (120 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_79: /* 0x79 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (121 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_7a: /* 0x7a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (122 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_int: /* 0x7b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (123 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_not_int: /* 0x7c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (124 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_long: /* 0x7d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (125 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_not_long: /* 0x7e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (126 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_float: /* 0x7f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (127 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_double: /* 0x80 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (128 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_long: /* 0x81 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (129 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_float: /* 0x82 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (130 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_double: /* 0x83 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (131 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_int: /* 0x84 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (132 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_float: /* 0x85 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (133 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_double: /* 0x86 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (134 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_int: /* 0x87 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (135 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_long: /* 0x88 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (136 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_double: /* 0x89 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (137 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_int: /* 0x8a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (138 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_long: /* 0x8b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (139 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_float: /* 0x8c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (140 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_byte: /* 0x8d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (141 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_char: /* 0x8e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (142 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_short: /* 0x8f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (143 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int: /* 0x90 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (144 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int: /* 0x91 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (145 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int: /* 0x92 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (146 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int: /* 0x93 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (147 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int: /* 0x94 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (148 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int: /* 0x95 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (149 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int: /* 0x96 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (150 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int: /* 0x97 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (151 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int: /* 0x98 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (152 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int: /* 0x99 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (153 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int: /* 0x9a */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (154 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long: /* 0x9b */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (155 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long: /* 0x9c */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (156 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long: /* 0x9d */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (157 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long: /* 0x9e */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (158 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long: /* 0x9f */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (159 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long: /* 0xa0 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (160 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long: /* 0xa1 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (161 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long: /* 0xa2 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (162 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long: /* 0xa3 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (163 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long: /* 0xa4 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (164 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long: /* 0xa5 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (165 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float: /* 0xa6 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (166 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float: /* 0xa7 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (167 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float: /* 0xa8 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (168 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float: /* 0xa9 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (169 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float: /* 0xaa */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (170 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double: /* 0xab */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (171 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double: /* 0xac */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (172 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double: /* 0xad */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (173 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double: /* 0xae */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (174 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double: /* 0xaf */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (175 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_2addr: /* 0xb0 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (176 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int_2addr: /* 0xb1 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (177 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_2addr: /* 0xb2 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (178 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_2addr: /* 0xb3 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (179 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_2addr: /* 0xb4 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (180 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_2addr: /* 0xb5 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (181 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_2addr: /* 0xb6 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (182 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_2addr: /* 0xb7 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (183 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_2addr: /* 0xb8 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (184 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_2addr: /* 0xb9 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (185 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_2addr: /* 0xba */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (186 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long_2addr: /* 0xbb */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (187 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long_2addr: /* 0xbc */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (188 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long_2addr: /* 0xbd */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (189 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long_2addr: /* 0xbe */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (190 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long_2addr: /* 0xbf */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (191 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long_2addr: /* 0xc0 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (192 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long_2addr: /* 0xc1 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (193 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long_2addr: /* 0xc2 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (194 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long_2addr: /* 0xc3 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (195 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long_2addr: /* 0xc4 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (196 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long_2addr: /* 0xc5 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (197 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float_2addr: /* 0xc6 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (198 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float_2addr: /* 0xc7 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (199 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float_2addr: /* 0xc8 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (200 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float_2addr: /* 0xc9 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (201 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float_2addr: /* 0xca */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (202 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double_2addr: /* 0xcb */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (203 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double_2addr: /* 0xcc */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (204 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double_2addr: /* 0xcd */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (205 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double_2addr: /* 0xce */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (206 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double_2addr: /* 0xcf */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (207 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit16: /* 0xd0 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (208 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int: /* 0xd1 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (209 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit16: /* 0xd2 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (210 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit16: /* 0xd3 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (211 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit16: /* 0xd4 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (212 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit16: /* 0xd5 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (213 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit16: /* 0xd6 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (214 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit16: /* 0xd7 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (215 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit8: /* 0xd8 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (216 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int_lit8: /* 0xd9 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (217 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit8: /* 0xda */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (218 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit8: /* 0xdb */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (219 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit8: /* 0xdc */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (220 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit8: /* 0xdd */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (221 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit8: /* 0xde */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (222 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit8: /* 0xdf */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (223 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_lit8: /* 0xe0 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (224 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_lit8: /* 0xe1 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (225 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_lit8: /* 0xe2 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (226 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_quick: /* 0xe3 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (227 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide_quick: /* 0xe4 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (228 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object_quick: /* 0xe5 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (229 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_quick: /* 0xe6 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (230 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide_quick: /* 0xe7 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (231 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object_quick: /* 0xe8 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (232 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_quick: /* 0xe9 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (233 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range_quick: /* 0xea */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (234 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean_quick: /* 0xeb */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (235 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte_quick: /* 0xec */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (236 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char_quick: /* 0xed */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (237 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short_quick: /* 0xee */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (238 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean_quick: /* 0xef */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (239 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte_quick: /* 0xf0 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (240 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char_quick: /* 0xf1 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (241 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short_quick: /* 0xf2 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (242 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f3: /* 0xf3 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (243 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f4: /* 0xf4 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (244 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f5: /* 0xf5 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (245 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f6: /* 0xf6 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (246 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f7: /* 0xf7 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (247 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f8: /* 0xf8 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (248 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f9: /* 0xf9 */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (249 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_polymorphic: /* 0xfa */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (250 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_polymorphic_range: /* 0xfb */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (251 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_custom: /* 0xfc */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (252 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_custom_range: /* 0xfd */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (253 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_method_handle: /* 0xfe */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (254 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_method_type: /* 0xff */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
REFRESH_IBASE
dla ra, artMterpAsmInstructionStart
dla t9, MterpCheckBefore
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
daddu ra, ra, (255 * 128) # Addr of primary handler.
jalr zero, t9 # (self, shadow_frame, dex_pc_ptr) Note: tail call.
.balign 128
.global artMterpAsmAltInstructionEnd
artMterpAsmAltInstructionEnd:
/*
* We've detected a condition that will result in an exception, but the exception
* has not yet been thrown. Just bail out to the reference interpreter to deal with it.
* TUNING: for consistency, we may want to just go ahead and handle these here.
*/
.extern MterpLogDivideByZeroException
common_errDivideByZero:
EXPORT_PC
#if MTERP_LOGGING
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
jal MterpLogDivideByZeroException
#endif
b MterpCommonFallback
.extern MterpLogArrayIndexException
common_errArrayIndex:
EXPORT_PC
#if MTERP_LOGGING
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
jal MterpLogArrayIndexException
#endif
b MterpCommonFallback
.extern MterpLogNullObjectException
common_errNullObject:
EXPORT_PC
#if MTERP_LOGGING
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
jal MterpLogNullObjectException
#endif
b MterpCommonFallback
/*
* If we're here, something is out of the ordinary. If there is a pending
* exception, handle it. Otherwise, roll back and retry with the reference
* interpreter.
*/
MterpPossibleException:
ld a0, THREAD_EXCEPTION_OFFSET(rSELF)
beqzc a0, MterpFallback # If not, fall back to reference interpreter.
/* intentional fallthrough - handle pending exception. */
/*
* On return from a runtime helper routine, we've found a pending exception.
* Can we handle it here - or need to bail out to caller?
*
*/
.extern MterpHandleException
.extern MterpShouldSwitchInterpreters
MterpException:
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
jal MterpHandleException # (self, shadow_frame)
beqzc v0, MterpExceptionReturn # no local catch, back to caller.
ld a0, OFF_FP_DEX_INSTRUCTIONS(rFP)
lwu a1, OFF_FP_DEX_PC(rFP)
REFRESH_IBASE
dlsa rPC, a1, a0, 1 # generate new dex_pc_ptr
/* Do we need to switch interpreters? */
jal MterpShouldSwitchInterpreters
bnezc v0, MterpFallback
/* resume execution at catch block */
EXPORT_PC
FETCH_INST
GET_INST_OPCODE v0
GOTO_OPCODE v0
/* NOTE: no fallthrough */
/*
* Common handling for branches with support for Jit profiling.
* On entry:
* rINST <= signed offset
* rPROFILE <= signed hotness countdown (expanded to 64 bits)
*
* We have quite a few different cases for branch profiling, OSR detection and
* suspend check support here.
*
* Taken backward branches:
* If profiling active, do hotness countdown and report if we hit zero.
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
* Is there a pending suspend request? If so, suspend.
*
* Taken forward branches and not-taken backward branches:
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
*
* Our most common case is expected to be a taken backward branch with active jit profiling,
* but no full OSR check and no pending suspend request.
* Next most common case is not-taken branch with no full OSR check.
*
*/
MterpCommonTakenBranchNoFlags:
bgtzc rINST, .L_forward_branch # don't add forward branches to hotness
/*
* We need to subtract 1 from positive values and we should not see 0 here,
* so we may use the result of the comparison with -1.
*/
li v0, JIT_CHECK_OSR
beqc rPROFILE, v0, .L_osr_check
bltc rPROFILE, v0, .L_resume_backward_branch
dsubu rPROFILE, 1
beqzc rPROFILE, .L_add_batch # counted down to zero - report
.L_resume_backward_branch:
lw ra, THREAD_FLAGS_OFFSET(rSELF)
REFRESH_IBASE
daddu a2, rINST, rINST # a2<- byte offset
FETCH_ADVANCE_INST_RB a2 # update rPC, load rINST
and ra, THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
bnezc ra, .L_suspend_request_pending
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
.L_suspend_request_pending:
EXPORT_PC
move a0, rSELF
jal MterpSuspendCheck # (self)
bnezc v0, MterpFallback
REFRESH_IBASE # might have changed during suspend
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
.L_no_count_backwards:
li v0, JIT_CHECK_OSR # check for possible OSR re-entry
bnec rPROFILE, v0, .L_resume_backward_branch
.L_osr_check:
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
EXPORT_PC
jal MterpMaybeDoOnStackReplacement # (self, shadow_frame, offset)
bnezc v0, MterpOnStackReplacement
b .L_resume_backward_branch
.L_forward_branch:
li v0, JIT_CHECK_OSR # check for possible OSR re-entry
beqc rPROFILE, v0, .L_check_osr_forward
.L_resume_forward_branch:
daddu a2, rINST, rINST # a2<- byte offset
FETCH_ADVANCE_INST_RB a2 # update rPC, load rINST
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
.L_check_osr_forward:
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
EXPORT_PC
jal MterpMaybeDoOnStackReplacement # (self, shadow_frame, offset)
bnezc v0, MterpOnStackReplacement
b .L_resume_forward_branch
.L_add_batch:
daddu a1, rFP, OFF_FP_SHADOWFRAME
sh rPROFILE, SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET(a1)
ld a0, OFF_FP_METHOD(rFP)
move a2, rSELF
jal MterpAddHotnessBatch # (method, shadow_frame, self)
move rPROFILE, v0 # restore new hotness countdown to rPROFILE
b .L_no_count_backwards
/*
* Entered from the conditional branch handlers when OSR check request active on
* not-taken path. All Dalvik not-taken conditional branch offsets are 2.
*/
.L_check_not_taken_osr:
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
li a2, 2
EXPORT_PC
jal MterpMaybeDoOnStackReplacement # (self, shadow_frame, offset)
bnezc v0, MterpOnStackReplacement
FETCH_ADVANCE_INST 2
GET_INST_OPCODE v0 # extract opcode from rINST
GOTO_OPCODE v0 # jump to next instruction
/*
* On-stack replacement has happened, and now we've returned from the compiled method.
*/
MterpOnStackReplacement:
#if MTERP_LOGGING
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST # rINST contains offset
jal MterpLogOSR
#endif
li v0, 1 # Signal normal return
b MterpDone
/*
* Bail out to reference interpreter.
*/
.extern MterpLogFallback
MterpFallback:
EXPORT_PC
#if MTERP_LOGGING
move a0, rSELF
daddu a1, rFP, OFF_FP_SHADOWFRAME
jal MterpLogFallback
#endif
MterpCommonFallback:
li v0, 0 # signal retry with reference interpreter.
b MterpDone
/*
* We pushed some registers on the stack in ExecuteMterpImpl, then saved
* SP and RA. Here we restore SP, restore the registers, and then restore
* RA to PC.
*
* On entry:
* uint32_t* rFP (should still be live, pointer to base of vregs)
*/
MterpExceptionReturn:
li v0, 1 # signal return to caller.
b MterpDone
/*
* Returned value is expected in a0 and if it's not 64-bit, the 32 most
* significant bits of a0 must be zero-extended or sign-extended
* depending on the return type.
*/
MterpReturn:
ld a2, OFF_FP_RESULT_REGISTER(rFP)
sd a0, 0(a2)
li v0, 1 # signal return to caller.
MterpDone:
/*
* At this point, we expect rPROFILE to be non-zero. If negative, hotness is disabled or we're
* checking for OSR. If greater than zero, we might have unreported hotness to register
* (the difference between the ending rPROFILE and the cached hotness counter). rPROFILE
* should only reach zero immediately after a hotness decrement, and is then reset to either
* a negative special state or the new non-zero countdown value.
*/
blez rPROFILE, .L_pop_and_return # if > 0, we may have some counts to report.
MterpProfileActive:
move rINST, v0 # stash return value
/* Report cached hotness counts */
ld a0, OFF_FP_METHOD(rFP)
daddu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rSELF
sh rPROFILE, SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET(a1)
jal MterpAddHotnessBatch # (method, shadow_frame, self)
move v0, rINST # restore return value
.L_pop_and_return:
ld s6, STACK_OFFSET_S6(sp)
.cfi_restore 22
ld s5, STACK_OFFSET_S5(sp)
.cfi_restore 21
ld s4, STACK_OFFSET_S4(sp)
.cfi_restore 20
ld s3, STACK_OFFSET_S3(sp)
.cfi_restore 19
ld s2, STACK_OFFSET_S2(sp)
.cfi_restore 18
ld s1, STACK_OFFSET_S1(sp)
.cfi_restore 17
ld s0, STACK_OFFSET_S0(sp)
.cfi_restore 16
ld ra, STACK_OFFSET_RA(sp)
.cfi_restore 31
ld t8, STACK_OFFSET_GP(sp)
.cpreturn
.cfi_restore 28
.set noreorder
jr ra
daddu sp, sp, STACK_SIZE
.cfi_adjust_cfa_offset -STACK_SIZE
.cfi_endproc
.set reorder
.size ExecuteMterpImpl, .-ExecuteMterpImpl