blob: f5e7e635dea4d31dc7f168a10bc8606b8f666788 [file] [log] [blame]
/*
* Copyright (C) 2011 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "dex/compiler_ir.h"
#include "dex/compiler_internals.h"
#include "dex/quick/mir_to_lir-inl.h"
#include "invoke_type.h"
namespace art {
/* This file contains target-independent codegen and support. */
/*
* Load an immediate value into a fixed or temp register. Target
* register is clobbered, and marked in_use.
*/
LIR* Mir2Lir::LoadConstant(RegStorage r_dest, int value) {
if (IsTemp(r_dest)) {
Clobber(r_dest);
MarkInUse(r_dest);
}
return LoadConstantNoClobber(r_dest, value);
}
/*
* Temporary workaround for Issue 7250540. If we're loading a constant zero into a
* promoted floating point register, also copy a zero into the int/ref identity of
* that sreg.
*/
void Mir2Lir::Workaround7250540(RegLocation rl_dest, RegStorage zero_reg) {
if (rl_dest.fp) {
int pmap_index = SRegToPMap(rl_dest.s_reg_low);
if (promotion_map_[pmap_index].fp_location == kLocPhysReg) {
// Now, determine if this vreg is ever used as a reference. If not, we're done.
bool used_as_reference = false;
int base_vreg = mir_graph_->SRegToVReg(rl_dest.s_reg_low);
for (int i = 0; !used_as_reference && (i < mir_graph_->GetNumSSARegs()); i++) {
if (mir_graph_->SRegToVReg(mir_graph_->reg_location_[i].s_reg_low) == base_vreg) {
used_as_reference |= mir_graph_->reg_location_[i].ref;
}
}
if (!used_as_reference) {
return;
}
RegStorage temp_reg = zero_reg;
if (!temp_reg.Valid()) {
temp_reg = AllocTemp();
LoadConstant(temp_reg, 0);
}
if (promotion_map_[pmap_index].core_location == kLocPhysReg) {
// Promoted - just copy in a zero
OpRegCopy(RegStorage::Solo32(promotion_map_[pmap_index].core_reg), temp_reg);
} else {
// Lives in the frame, need to store.
StoreBaseDisp(TargetReg(kSp), SRegOffset(rl_dest.s_reg_low), temp_reg, k32);
}
if (!zero_reg.Valid()) {
FreeTemp(temp_reg);
}
}
}
}
/*
* Load a Dalvik register into a physical register. Take care when
* using this routine, as it doesn't perform any bookkeeping regarding
* register liveness. That is the responsibility of the caller.
*/
void Mir2Lir::LoadValueDirect(RegLocation rl_src, RegStorage r_dest) {
rl_src = UpdateLoc(rl_src);
if (rl_src.location == kLocPhysReg) {
OpRegCopy(r_dest, rl_src.reg);
} else if (IsInexpensiveConstant(rl_src)) {
// On 64-bit targets, will sign extend. Make sure constant reference is always NULL.
DCHECK(!rl_src.ref || (mir_graph_->ConstantValue(rl_src) == 0));
LoadConstantNoClobber(r_dest, mir_graph_->ConstantValue(rl_src));
} else {
DCHECK((rl_src.location == kLocDalvikFrame) ||
(rl_src.location == kLocCompilerTemp));
if (rl_src.ref) {
LoadRefDisp(TargetReg(kSp), SRegOffset(rl_src.s_reg_low), r_dest);
} else {
Load32Disp(TargetReg(kSp), SRegOffset(rl_src.s_reg_low), r_dest);
}
}
}
/*
* Similar to LoadValueDirect, but clobbers and allocates the target
* register. Should be used when loading to a fixed register (for example,
* loading arguments to an out of line call.
*/
void Mir2Lir::LoadValueDirectFixed(RegLocation rl_src, RegStorage r_dest) {
Clobber(r_dest);
MarkInUse(r_dest);
LoadValueDirect(rl_src, r_dest);
}
/*
* Load a Dalvik register pair into a physical register[s]. Take care when
* using this routine, as it doesn't perform any bookkeeping regarding
* register liveness. That is the responsibility of the caller.
*/
void Mir2Lir::LoadValueDirectWide(RegLocation rl_src, RegStorage r_dest) {
rl_src = UpdateLocWide(rl_src);
if (rl_src.location == kLocPhysReg) {
OpRegCopyWide(r_dest, rl_src.reg);
} else if (IsInexpensiveConstant(rl_src)) {
LoadConstantWide(r_dest, mir_graph_->ConstantValueWide(rl_src));
} else {
DCHECK((rl_src.location == kLocDalvikFrame) ||
(rl_src.location == kLocCompilerTemp));
LoadBaseDisp(TargetReg(kSp), SRegOffset(rl_src.s_reg_low), r_dest, k64);
}
}
/*
* Similar to LoadValueDirect, but clobbers and allocates the target
* registers. Should be used when loading to a fixed registers (for example,
* loading arguments to an out of line call.
*/
void Mir2Lir::LoadValueDirectWideFixed(RegLocation rl_src, RegStorage r_dest) {
Clobber(r_dest);
MarkInUse(r_dest);
LoadValueDirectWide(rl_src, r_dest);
}
RegLocation Mir2Lir::LoadValue(RegLocation rl_src, RegisterClass op_kind) {
rl_src = UpdateLoc(rl_src);
if (rl_src.location == kLocPhysReg) {
if (!RegClassMatches(op_kind, rl_src.reg)) {
// Wrong register class, realloc, copy and transfer ownership.
RegStorage new_reg = AllocTypedTemp(rl_src.fp, op_kind);
OpRegCopy(new_reg, rl_src.reg);
// Clobber the old reg.
Clobber(rl_src.reg);
// ...and mark the new one live.
rl_src.reg = new_reg;
MarkLive(rl_src);
}
return rl_src;
}
DCHECK_NE(rl_src.s_reg_low, INVALID_SREG);
rl_src.reg = AllocTypedTemp(rl_src.fp, op_kind);
LoadValueDirect(rl_src, rl_src.reg);
rl_src.location = kLocPhysReg;
MarkLive(rl_src);
return rl_src;
}
void Mir2Lir::StoreValue(RegLocation rl_dest, RegLocation rl_src) {
/*
* Sanity checking - should never try to store to the same
* ssa name during the compilation of a single instruction
* without an intervening ClobberSReg().
*/
if (kIsDebugBuild) {
DCHECK((live_sreg_ == INVALID_SREG) ||
(rl_dest.s_reg_low != live_sreg_));
live_sreg_ = rl_dest.s_reg_low;
}
LIR* def_start;
LIR* def_end;
DCHECK(!rl_dest.wide);
DCHECK(!rl_src.wide);
rl_src = UpdateLoc(rl_src);
rl_dest = UpdateLoc(rl_dest);
if (rl_src.location == kLocPhysReg) {
if (IsLive(rl_src.reg) ||
IsPromoted(rl_src.reg) ||
(rl_dest.location == kLocPhysReg)) {
// Src is live/promoted or Dest has assigned reg.
rl_dest = EvalLoc(rl_dest, kAnyReg, false);
OpRegCopy(rl_dest.reg, rl_src.reg);
} else {
// Just re-assign the registers. Dest gets Src's regs
rl_dest.reg = rl_src.reg;
Clobber(rl_src.reg);
}
} else {
// Load Src either into promoted Dest or temps allocated for Dest
rl_dest = EvalLoc(rl_dest, kAnyReg, false);
LoadValueDirect(rl_src, rl_dest.reg);
}
// Dest is now live and dirty (until/if we flush it to home location)
MarkLive(rl_dest);
MarkDirty(rl_dest);
ResetDefLoc(rl_dest);
if (IsDirty(rl_dest.reg) && LiveOut(rl_dest.s_reg_low)) {
def_start = last_lir_insn_;
Store32Disp(TargetReg(kSp), SRegOffset(rl_dest.s_reg_low), rl_dest.reg);
MarkClean(rl_dest);
def_end = last_lir_insn_;
if (!rl_dest.ref) {
// Exclude references from store elimination
MarkDef(rl_dest, def_start, def_end);
}
}
}
RegLocation Mir2Lir::LoadValueWide(RegLocation rl_src, RegisterClass op_kind) {
DCHECK(rl_src.wide);
rl_src = UpdateLocWide(rl_src);
if (rl_src.location == kLocPhysReg) {
if (!RegClassMatches(op_kind, rl_src.reg)) {
// Wrong register class, realloc, copy and transfer ownership.
RegStorage new_regs = AllocTypedTempWide(rl_src.fp, op_kind);
OpRegCopyWide(new_regs, rl_src.reg);
// Clobber the old regs.
Clobber(rl_src.reg);
// ...and mark the new ones live.
rl_src.reg = new_regs;
MarkLive(rl_src);
}
return rl_src;
}
DCHECK_NE(rl_src.s_reg_low, INVALID_SREG);
DCHECK_NE(GetSRegHi(rl_src.s_reg_low), INVALID_SREG);
rl_src.reg = AllocTypedTempWide(rl_src.fp, op_kind);
LoadValueDirectWide(rl_src, rl_src.reg);
rl_src.location = kLocPhysReg;
MarkLive(rl_src);
return rl_src;
}
void Mir2Lir::StoreValueWide(RegLocation rl_dest, RegLocation rl_src) {
/*
* Sanity checking - should never try to store to the same
* ssa name during the compilation of a single instruction
* without an intervening ClobberSReg().
*/
if (kIsDebugBuild) {
DCHECK((live_sreg_ == INVALID_SREG) ||
(rl_dest.s_reg_low != live_sreg_));
live_sreg_ = rl_dest.s_reg_low;
}
LIR* def_start;
LIR* def_end;
DCHECK(rl_dest.wide);
DCHECK(rl_src.wide);
rl_src = UpdateLocWide(rl_src);
rl_dest = UpdateLocWide(rl_dest);
if (rl_src.location == kLocPhysReg) {
if (IsLive(rl_src.reg) ||
IsPromoted(rl_src.reg) ||
(rl_dest.location == kLocPhysReg)) {
/*
* If src reg[s] are tied to the original Dalvik vreg via liveness or promotion, we
* can't repurpose them. Similarly, if the dest reg[s] are tied to Dalvik vregs via
* promotion, we can't just re-assign. In these cases, we have to copy.
*/
rl_dest = EvalLoc(rl_dest, kAnyReg, false);
OpRegCopyWide(rl_dest.reg, rl_src.reg);
} else {
// Just re-assign the registers. Dest gets Src's regs
rl_dest.reg = rl_src.reg;
Clobber(rl_src.reg);
}
} else {
// Load Src either into promoted Dest or temps allocated for Dest
rl_dest = EvalLoc(rl_dest, kAnyReg, false);
LoadValueDirectWide(rl_src, rl_dest.reg);
}
// Dest is now live and dirty (until/if we flush it to home location)
MarkLive(rl_dest);
MarkWide(rl_dest.reg);
MarkDirty(rl_dest);
ResetDefLocWide(rl_dest);
if (IsDirty(rl_dest.reg) && (LiveOut(rl_dest.s_reg_low) ||
LiveOut(GetSRegHi(rl_dest.s_reg_low)))) {
def_start = last_lir_insn_;
DCHECK_EQ((mir_graph_->SRegToVReg(rl_dest.s_reg_low)+1),
mir_graph_->SRegToVReg(GetSRegHi(rl_dest.s_reg_low)));
StoreBaseDisp(TargetReg(kSp), SRegOffset(rl_dest.s_reg_low), rl_dest.reg, k64);
MarkClean(rl_dest);
def_end = last_lir_insn_;
MarkDefWide(rl_dest, def_start, def_end);
}
}
void Mir2Lir::StoreFinalValue(RegLocation rl_dest, RegLocation rl_src) {
DCHECK_EQ(rl_src.location, kLocPhysReg);
if (rl_dest.location == kLocPhysReg) {
OpRegCopy(rl_dest.reg, rl_src.reg);
} else {
// Just re-assign the register. Dest gets Src's reg.
rl_dest.location = kLocPhysReg;
rl_dest.reg = rl_src.reg;
Clobber(rl_src.reg);
}
// Dest is now live and dirty (until/if we flush it to home location)
MarkLive(rl_dest);
MarkDirty(rl_dest);
ResetDefLoc(rl_dest);
if (IsDirty(rl_dest.reg) && LiveOut(rl_dest.s_reg_low)) {
LIR *def_start = last_lir_insn_;
Store32Disp(TargetReg(kSp), SRegOffset(rl_dest.s_reg_low), rl_dest.reg);
MarkClean(rl_dest);
LIR *def_end = last_lir_insn_;
if (!rl_dest.ref) {
// Exclude references from store elimination
MarkDef(rl_dest, def_start, def_end);
}
}
}
void Mir2Lir::StoreFinalValueWide(RegLocation rl_dest, RegLocation rl_src) {
DCHECK(rl_dest.wide);
DCHECK(rl_src.wide);
DCHECK_EQ(rl_src.location, kLocPhysReg);
if (rl_dest.location == kLocPhysReg) {
OpRegCopyWide(rl_dest.reg, rl_src.reg);
} else {
// Just re-assign the registers. Dest gets Src's regs.
rl_dest.location = kLocPhysReg;
rl_dest.reg = rl_src.reg;
Clobber(rl_src.reg);
}
// Dest is now live and dirty (until/if we flush it to home location).
MarkLive(rl_dest);
MarkWide(rl_dest.reg);
MarkDirty(rl_dest);
ResetDefLocWide(rl_dest);
if (IsDirty(rl_dest.reg) && (LiveOut(rl_dest.s_reg_low) ||
LiveOut(GetSRegHi(rl_dest.s_reg_low)))) {
LIR *def_start = last_lir_insn_;
DCHECK_EQ((mir_graph_->SRegToVReg(rl_dest.s_reg_low)+1),
mir_graph_->SRegToVReg(GetSRegHi(rl_dest.s_reg_low)));
StoreBaseDisp(TargetReg(kSp), SRegOffset(rl_dest.s_reg_low), rl_dest.reg, k64);
MarkClean(rl_dest);
LIR *def_end = last_lir_insn_;
MarkDefWide(rl_dest, def_start, def_end);
}
}
/* Utilities to load the current Method* */
void Mir2Lir::LoadCurrMethodDirect(RegStorage r_tgt) {
LoadValueDirectFixed(mir_graph_->GetMethodLoc(), r_tgt);
}
RegLocation Mir2Lir::LoadCurrMethod() {
return LoadValue(mir_graph_->GetMethodLoc(), kCoreReg);
}
RegLocation Mir2Lir::ForceTemp(RegLocation loc) {
DCHECK(!loc.wide);
DCHECK(loc.location == kLocPhysReg);
DCHECK(!loc.reg.IsFloat());
if (IsTemp(loc.reg)) {
Clobber(loc.reg);
} else {
RegStorage temp_low = AllocTemp();
OpRegCopy(temp_low, loc.reg);
loc.reg = temp_low;
}
// Ensure that this doesn't represent the original SR any more.
loc.s_reg_low = INVALID_SREG;
return loc;
}
// FIXME: will need an update for 64-bit core regs.
RegLocation Mir2Lir::ForceTempWide(RegLocation loc) {
DCHECK(loc.wide);
DCHECK(loc.location == kLocPhysReg);
DCHECK(!loc.reg.IsFloat());
if (IsTemp(loc.reg.GetLow())) {
Clobber(loc.reg.GetLow());
} else {
RegStorage temp_low = AllocTemp();
OpRegCopy(temp_low, loc.reg.GetLow());
loc.reg.SetLowReg(temp_low.GetReg());
}
if (IsTemp(loc.reg.GetHigh())) {
Clobber(loc.reg.GetHigh());
} else {
RegStorage temp_high = AllocTemp();
OpRegCopy(temp_high, loc.reg.GetHigh());
loc.reg.SetHighReg(temp_high.GetReg());
}
// Ensure that this doesn't represent the original SR any more.
loc.s_reg_low = INVALID_SREG;
return loc;
}
} // namespace art