blob: e9dffc1fac0c5515a64aebcad0d6d46dfb4bbbf9 [file] [log] [blame]
/*
* Copyright (C) 2014 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ART_COMPILER_OPTIMIZING_SSA_LIVENESS_ANALYSIS_H_
#define ART_COMPILER_OPTIMIZING_SSA_LIVENESS_ANALYSIS_H_
#include <iostream>
#include "nodes.h"
namespace art {
class CodeGenerator;
class SsaLivenessAnalysis;
static constexpr int kNoRegister = -1;
class BlockInfo : public ArenaObject<kArenaAllocSsaLiveness> {
public:
BlockInfo(ArenaAllocator* allocator, const HBasicBlock& block, size_t number_of_ssa_values)
: block_(block),
live_in_(allocator, number_of_ssa_values, false, kArenaAllocSsaLiveness),
live_out_(allocator, number_of_ssa_values, false, kArenaAllocSsaLiveness),
kill_(allocator, number_of_ssa_values, false, kArenaAllocSsaLiveness) {
UNUSED(block_);
live_in_.ClearAllBits();
live_out_.ClearAllBits();
kill_.ClearAllBits();
}
private:
const HBasicBlock& block_;
ArenaBitVector live_in_;
ArenaBitVector live_out_;
ArenaBitVector kill_;
friend class SsaLivenessAnalysis;
DISALLOW_COPY_AND_ASSIGN(BlockInfo);
};
/**
* A live range contains the start and end of a range where an instruction or a temporary
* is live.
*/
class LiveRange FINAL : public ArenaObject<kArenaAllocSsaLiveness> {
public:
LiveRange(size_t start, size_t end, LiveRange* next) : start_(start), end_(end), next_(next) {
DCHECK_LT(start, end);
DCHECK(next_ == nullptr || next_->GetStart() > GetEnd());
}
size_t GetStart() const { return start_; }
size_t GetEnd() const { return end_; }
LiveRange* GetNext() const { return next_; }
bool IntersectsWith(const LiveRange& other) const {
return (start_ >= other.start_ && start_ < other.end_)
|| (other.start_ >= start_ && other.start_ < end_);
}
bool IsBefore(const LiveRange& other) const {
return end_ <= other.start_;
}
void Dump(std::ostream& stream) const {
stream << "[" << start_ << "," << end_ << ")";
}
LiveRange* Dup(ArenaAllocator* allocator) const {
return new (allocator) LiveRange(
start_, end_, next_ == nullptr ? nullptr : next_->Dup(allocator));
}
LiveRange* GetLastRange() {
return next_ == nullptr ? this : next_->GetLastRange();
}
private:
size_t start_;
size_t end_;
LiveRange* next_;
friend class LiveInterval;
DISALLOW_COPY_AND_ASSIGN(LiveRange);
};
/**
* A use position represents a live interval use at a given position.
*/
class UsePosition : public ArenaObject<kArenaAllocSsaLiveness> {
public:
UsePosition(HInstruction* user, size_t input_index, size_t position, UsePosition* next)
: user_(user),
input_index_(input_index),
position_(position),
next_(next) {
DCHECK(next_ == nullptr || next->GetPosition() >= GetPosition());
}
explicit UsePosition(size_t position)
: user_(nullptr),
input_index_(kNoInput),
position_(dchecked_integral_cast<uint32_t>(position)),
next_(nullptr) {
}
size_t GetPosition() const { return position_; }
UsePosition* GetNext() const { return next_; }
void SetNext(UsePosition* next) { next_ = next; }
HInstruction* GetUser() const { return user_; }
bool IsSynthesized() const { return user_ == nullptr; }
size_t GetInputIndex() const { return input_index_; }
void Dump(std::ostream& stream) const {
stream << position_;
}
HLoopInformation* GetLoopInformation() const {
return user_->GetBlock()->GetLoopInformation();
}
UsePosition* Dup(ArenaAllocator* allocator) const {
return new (allocator) UsePosition(
user_, input_index_, position_,
next_ == nullptr ? nullptr : next_->Dup(allocator));
}
bool RequiresRegister() const {
if (IsSynthesized()) return false;
Location location = GetUser()->GetLocations()->InAt(GetInputIndex());
return location.IsUnallocated() && location.RequiresRegisterKind();
}
private:
static constexpr uint32_t kNoInput = static_cast<uint32_t>(-1);
HInstruction* const user_;
const size_t input_index_;
const size_t position_;
UsePosition* next_;
DISALLOW_COPY_AND_ASSIGN(UsePosition);
};
/**
* An environment use position represents a live interval for environment use at a given position.
*/
class EnvUsePosition : public ArenaObject<kArenaAllocSsaLiveness> {
public:
EnvUsePosition(HEnvironment* environment,
size_t input_index,
size_t position,
EnvUsePosition* next)
: environment_(environment),
input_index_(input_index),
position_(position),
next_(next) {
DCHECK(environment != nullptr);
DCHECK(next_ == nullptr || next->GetPosition() >= GetPosition());
}
size_t GetPosition() const { return position_; }
EnvUsePosition* GetNext() const { return next_; }
void SetNext(EnvUsePosition* next) { next_ = next; }
HEnvironment* GetEnvironment() const { return environment_; }
size_t GetInputIndex() const { return input_index_; }
void Dump(std::ostream& stream) const {
stream << position_;
}
EnvUsePosition* Dup(ArenaAllocator* allocator) const {
return new (allocator) EnvUsePosition(
environment_, input_index_, position_,
next_ == nullptr ? nullptr : next_->Dup(allocator));
}
private:
HEnvironment* const environment_;
const size_t input_index_;
const size_t position_;
EnvUsePosition* next_;
DISALLOW_COPY_AND_ASSIGN(EnvUsePosition);
};
class SafepointPosition : public ArenaObject<kArenaAllocSsaLiveness> {
public:
explicit SafepointPosition(HInstruction* instruction)
: instruction_(instruction),
next_(nullptr) {}
void SetNext(SafepointPosition* next) {
next_ = next;
}
size_t GetPosition() const {
return instruction_->GetLifetimePosition();
}
SafepointPosition* GetNext() const {
return next_;
}
LocationSummary* GetLocations() const {
return instruction_->GetLocations();
}
HInstruction* GetInstruction() const {
return instruction_;
}
private:
HInstruction* const instruction_;
SafepointPosition* next_;
DISALLOW_COPY_AND_ASSIGN(SafepointPosition);
};
/**
* An interval is a list of disjoint live ranges where an instruction is live.
* Each instruction that has uses gets an interval.
*/
class LiveInterval : public ArenaObject<kArenaAllocSsaLiveness> {
public:
static LiveInterval* MakeInterval(ArenaAllocator* allocator,
Primitive::Type type,
HInstruction* instruction = nullptr) {
return new (allocator) LiveInterval(allocator, type, instruction);
}
static LiveInterval* MakeFixedInterval(ArenaAllocator* allocator, int reg, Primitive::Type type) {
return new (allocator) LiveInterval(allocator, type, nullptr, true, reg, false);
}
static LiveInterval* MakeTempInterval(ArenaAllocator* allocator, Primitive::Type type) {
return new (allocator) LiveInterval(allocator, type, nullptr, false, kNoRegister, true);
}
bool IsFixed() const { return is_fixed_; }
bool IsTemp() const { return is_temp_; }
// This interval is the result of a split.
bool IsSplit() const { return parent_ != this; }
void AddTempUse(HInstruction* instruction, size_t temp_index) {
DCHECK(IsTemp());
DCHECK(first_use_ == nullptr) << "A temporary can only have one user";
DCHECK(first_env_use_ == nullptr) << "A temporary cannot have environment user";
size_t position = instruction->GetLifetimePosition();
first_use_ = new (allocator_) UsePosition(
instruction, temp_index, position, first_use_);
AddRange(position, position + 1);
}
// Record use of an input. The use will be recorded as an environment use if
// `environment` is not null and as register use otherwise. If `actual_user`
// is specified, the use will be recorded at `actual_user`'s lifetime position.
void AddUse(HInstruction* instruction,
HEnvironment* environment,
size_t input_index,
HInstruction* actual_user = nullptr,
bool keep_alive = false) {
bool is_environment = (environment != nullptr);
LocationSummary* locations = instruction->GetLocations();
if (actual_user == nullptr) {
actual_user = instruction;
}
// Set the use within the instruction.
size_t position = actual_user->GetLifetimePosition() + 1;
if (!is_environment) {
if (locations->IsFixedInput(input_index) || locations->OutputUsesSameAs(input_index)) {
// For fixed inputs and output same as input, the register allocator
// requires to have inputs die at the instruction, so that input moves use the
// location of the input just before that instruction (and not potential moves due
// to splitting).
DCHECK_EQ(instruction, actual_user);
position = actual_user->GetLifetimePosition();
} else if (!locations->InAt(input_index).IsValid()) {
return;
}
}
if (!is_environment && instruction->IsInLoop()) {
AddBackEdgeUses(*instruction->GetBlock());
}
if ((first_use_ != nullptr)
&& (first_use_->GetUser() == actual_user)
&& (first_use_->GetPosition() < position)) {
// The user uses the instruction multiple times, and one use dies before the other.
// We update the use list so that the latter is first.
DCHECK(!is_environment);
UsePosition* cursor = first_use_;
while ((cursor->GetNext() != nullptr) && (cursor->GetNext()->GetPosition() < position)) {
cursor = cursor->GetNext();
}
DCHECK(first_use_->GetPosition() + 1 == position);
UsePosition* new_use = new (allocator_) UsePosition(
instruction, input_index, position, cursor->GetNext());
cursor->SetNext(new_use);
if (first_range_->GetEnd() == first_use_->GetPosition()) {
first_range_->end_ = position;
}
return;
}
if (is_environment) {
first_env_use_ = new (allocator_) EnvUsePosition(
environment, input_index, position, first_env_use_);
} else {
first_use_ = new (allocator_) UsePosition(
instruction, input_index, position, first_use_);
}
if (is_environment && !keep_alive) {
// If this environment use does not keep the instruction live, it does not
// affect the live range of that instruction.
return;
}
size_t start_block_position = instruction->GetBlock()->GetLifetimeStart();
if (first_range_ == nullptr) {
// First time we see a use of that interval.
first_range_ = last_range_ = range_search_start_ =
new (allocator_) LiveRange(start_block_position, position, nullptr);
} else if (first_range_->GetStart() == start_block_position) {
// There is a use later in the same block or in a following block.
// Note that in such a case, `AddRange` for the whole blocks has been called
// before arriving in this method, and this is the reason the start of
// `first_range_` is before the given `position`.
DCHECK_LE(position, first_range_->GetEnd());
} else {
DCHECK(first_range_->GetStart() > position);
// There is a hole in the interval. Create a new range.
// Note that the start of `first_range_` can be equal to `end`: two blocks
// having adjacent lifetime positions are not necessarily
// predecessor/successor. When two blocks are predecessor/successor, the
// liveness algorithm has called `AddRange` before arriving in this method,
// and the check line 205 would succeed.
first_range_ = range_search_start_ =
new (allocator_) LiveRange(start_block_position, position, first_range_);
}
}
void AddPhiUse(HInstruction* instruction, size_t input_index, HBasicBlock* block) {
DCHECK(instruction->IsPhi());
if (block->IsInLoop()) {
AddBackEdgeUses(*block);
}
first_use_ = new (allocator_) UsePosition(
instruction, input_index, block->GetLifetimeEnd(), first_use_);
}
ALWAYS_INLINE void AddRange(size_t start, size_t end) {
if (first_range_ == nullptr) {
first_range_ = last_range_ = range_search_start_ =
new (allocator_) LiveRange(start, end, first_range_);
} else if (first_range_->GetStart() == end) {
// There is a use in the following block.
first_range_->start_ = start;
} else if (first_range_->GetStart() == start && first_range_->GetEnd() == end) {
DCHECK(is_fixed_);
} else {
DCHECK_GT(first_range_->GetStart(), end);
// There is a hole in the interval. Create a new range.
first_range_ = range_search_start_ = new (allocator_) LiveRange(start, end, first_range_);
}
}
void AddLoopRange(size_t start, size_t end) {
DCHECK(first_range_ != nullptr);
DCHECK_LE(start, first_range_->GetStart());
// Find the range that covers the positions after the loop.
LiveRange* after_loop = first_range_;
LiveRange* last_in_loop = nullptr;
while (after_loop != nullptr && after_loop->GetEnd() < end) {
DCHECK_LE(start, after_loop->GetStart());
last_in_loop = after_loop;
after_loop = after_loop->GetNext();
}
if (after_loop == nullptr) {
// Uses are only in the loop.
first_range_ = last_range_ = range_search_start_ =
new (allocator_) LiveRange(start, end, nullptr);
} else if (after_loop->GetStart() <= end) {
first_range_ = range_search_start_ = after_loop;
// There are uses after the loop.
first_range_->start_ = start;
} else {
// The use after the loop is after a lifetime hole.
DCHECK(last_in_loop != nullptr);
first_range_ = range_search_start_ = last_in_loop;
first_range_->start_ = start;
first_range_->end_ = end;
}
}
bool HasSpillSlot() const { return spill_slot_ != kNoSpillSlot; }
void SetSpillSlot(int slot) {
DCHECK(!is_fixed_);
DCHECK(!is_temp_);
spill_slot_ = slot;
}
int GetSpillSlot() const { return spill_slot_; }
void SetFrom(size_t from) {
if (first_range_ != nullptr) {
first_range_->start_ = from;
} else {
// Instruction without uses.
DCHECK(first_use_ == nullptr);
DCHECK(from == defined_by_->GetLifetimePosition());
first_range_ = last_range_ = range_search_start_ =
new (allocator_) LiveRange(from, from + 2, nullptr);
}
}
LiveInterval* GetParent() const { return parent_; }
// Returns whether this interval is the parent interval, that is, the interval
// that starts where the HInstruction is defined.
bool IsParent() const { return parent_ == this; }
LiveRange* GetFirstRange() const { return first_range_; }
LiveRange* GetLastRange() const { return last_range_; }
int GetRegister() const { return register_; }
void SetRegister(int reg) { register_ = reg; }
void ClearRegister() { register_ = kNoRegister; }
bool HasRegister() const { return register_ != kNoRegister; }
bool IsDeadAt(size_t position) const {
return GetEnd() <= position;
}
bool IsDefinedAt(size_t position) const {
return GetStart() <= position && !IsDeadAt(position);
}
// Returns true if the interval contains a LiveRange covering `position`.
// The range at or immediately after the current position of linear scan
// is cached for better performance. If `position` can be smaller than
// that, CoversSlow should be used instead.
bool Covers(size_t position) {
LiveRange* candidate = FindRangeAtOrAfter(position, range_search_start_);
range_search_start_ = candidate;
return (candidate != nullptr && candidate->GetStart() <= position);
}
// Same as Covers but always tests all ranges.
bool CoversSlow(size_t position) const {
LiveRange* candidate = FindRangeAtOrAfter(position, first_range_);
return candidate != nullptr && candidate->GetStart() <= position;
}
// Returns the first intersection of this interval with `current`, which
// must be the interval currently being allocated by linear scan.
size_t FirstIntersectionWith(LiveInterval* current) const {
// Find the first range after the start of `current`. We use the search
// cache to improve performance.
DCHECK(GetStart() <= current->GetStart() || IsFixed());
LiveRange* other_range = current->first_range_;
LiveRange* my_range = FindRangeAtOrAfter(other_range->GetStart(), range_search_start_);
if (my_range == nullptr) {
return kNoLifetime;
}
// Advance both intervals and find the first matching range start in
// this interval.
do {
if (my_range->IsBefore(*other_range)) {
my_range = my_range->GetNext();
if (my_range == nullptr) {
return kNoLifetime;
}
} else if (other_range->IsBefore(*my_range)) {
other_range = other_range->GetNext();
if (other_range == nullptr) {
return kNoLifetime;
}
} else {
DCHECK(my_range->IntersectsWith(*other_range));
return std::max(my_range->GetStart(), other_range->GetStart());
}
} while (true);
}
size_t GetStart() const {
return first_range_->GetStart();
}
size_t GetEnd() const {
return last_range_->GetEnd();
}
size_t GetLength() const {
return GetEnd() - GetStart();
}
size_t FirstRegisterUseAfter(size_t position) const {
if (is_temp_) {
return position == GetStart() ? position : kNoLifetime;
}
if (IsDefiningPosition(position) && DefinitionRequiresRegister()) {
return position;
}
UsePosition* use = first_use_;
size_t end = GetEnd();
while (use != nullptr && use->GetPosition() <= end) {
size_t use_position = use->GetPosition();
if (use_position > position) {
if (use->RequiresRegister()) {
return use_position;
}
}
use = use->GetNext();
}
return kNoLifetime;
}
// Returns the location of the first register use for this live interval,
// including a register definition if applicable.
size_t FirstRegisterUse() const {
return FirstRegisterUseAfter(GetStart());
}
// Whether the interval requires a register rather than a stack location.
// If needed for performance, this could be cached.
bool RequiresRegister() const {
return !HasRegister() && FirstRegisterUse() != kNoLifetime;
}
size_t FirstUseAfter(size_t position) const {
if (is_temp_) {
return position == GetStart() ? position : kNoLifetime;
}
if (IsDefiningPosition(position)) {
DCHECK(defined_by_->GetLocations()->Out().IsValid());
return position;
}
UsePosition* use = first_use_;
size_t end = GetEnd();
while (use != nullptr && use->GetPosition() <= end) {
size_t use_position = use->GetPosition();
if (use_position > position) {
return use_position;
}
use = use->GetNext();
}
return kNoLifetime;
}
UsePosition* GetFirstUse() const {
return first_use_;
}
EnvUsePosition* GetFirstEnvironmentUse() const {
return first_env_use_;
}
Primitive::Type GetType() const {
return type_;
}
HInstruction* GetDefinedBy() const {
return defined_by_;
}
bool HasWillCallSafepoint() const {
for (SafepointPosition* safepoint = first_safepoint_;
safepoint != nullptr;
safepoint = safepoint->GetNext()) {
if (safepoint->GetLocations()->WillCall()) return true;
}
return false;
}
SafepointPosition* FindSafepointJustBefore(size_t position) const {
for (SafepointPosition* safepoint = first_safepoint_, *previous = nullptr;
safepoint != nullptr;
previous = safepoint, safepoint = safepoint->GetNext()) {
if (safepoint->GetPosition() >= position) return previous;
}
return last_safepoint_;
}
/**
* Split this interval at `position`. This interval is changed to:
* [start ... position).
*
* The new interval covers:
* [position ... end)
*/
LiveInterval* SplitAt(size_t position) {
DCHECK(!is_temp_);
DCHECK(!is_fixed_);
DCHECK_GT(position, GetStart());
if (GetEnd() <= position) {
// This range dies before `position`, no need to split.
return nullptr;
}
LiveInterval* new_interval = new (allocator_) LiveInterval(allocator_, type_);
SafepointPosition* new_last_safepoint = FindSafepointJustBefore(position);
if (new_last_safepoint == nullptr) {
new_interval->first_safepoint_ = first_safepoint_;
new_interval->last_safepoint_ = last_safepoint_;
first_safepoint_ = last_safepoint_ = nullptr;
} else if (last_safepoint_ != new_last_safepoint) {
new_interval->last_safepoint_ = last_safepoint_;
new_interval->first_safepoint_ = new_last_safepoint->GetNext();
DCHECK(new_interval->first_safepoint_ != nullptr);
last_safepoint_ = new_last_safepoint;
last_safepoint_->SetNext(nullptr);
}
new_interval->next_sibling_ = next_sibling_;
next_sibling_ = new_interval;
new_interval->parent_ = parent_;
new_interval->first_use_ = first_use_;
new_interval->first_env_use_ = first_env_use_;
LiveRange* current = first_range_;
LiveRange* previous = nullptr;
// Iterate over the ranges, and either find a range that covers this position, or
// two ranges in between this position (that is, the position is in a lifetime hole).
do {
if (position >= current->GetEnd()) {
// Move to next range.
previous = current;
current = current->next_;
} else if (position <= current->GetStart()) {
// If the previous range did not cover this position, we know position is in
// a lifetime hole. We can just break the first_range_ and last_range_ links
// and return the new interval.
DCHECK(previous != nullptr);
DCHECK(current != first_range_);
new_interval->last_range_ = last_range_;
last_range_ = previous;
previous->next_ = nullptr;
new_interval->first_range_ = current;
if (range_search_start_ != nullptr && range_search_start_->GetEnd() >= current->GetEnd()) {
// Search start point is inside `new_interval`. Change it to null
// (i.e. the end of the interval) in the original interval.
range_search_start_ = nullptr;
}
new_interval->range_search_start_ = new_interval->first_range_;
return new_interval;
} else {
// This range covers position. We create a new last_range_ for this interval
// that covers last_range_->Start() and position. We also shorten the current
// range and make it the first range of the new interval.
DCHECK(position < current->GetEnd() && position > current->GetStart());
new_interval->last_range_ = last_range_;
last_range_ = new (allocator_) LiveRange(current->start_, position, nullptr);
if (previous != nullptr) {
previous->next_ = last_range_;
} else {
first_range_ = last_range_;
}
new_interval->first_range_ = current;
current->start_ = position;
if (range_search_start_ != nullptr && range_search_start_->GetEnd() >= current->GetEnd()) {
// Search start point is inside `new_interval`. Change it to `last_range`
// in the original interval. This is conservative but always correct.
range_search_start_ = last_range_;
}
new_interval->range_search_start_ = new_interval->first_range_;
return new_interval;
}
} while (current != nullptr);
LOG(FATAL) << "Unreachable";
return nullptr;
}
bool StartsBeforeOrAt(LiveInterval* other) const {
return GetStart() <= other->GetStart();
}
bool StartsAfter(LiveInterval* other) const {
return GetStart() > other->GetStart();
}
void Dump(std::ostream& stream) const {
stream << "ranges: { ";
LiveRange* current = first_range_;
while (current != nullptr) {
current->Dump(stream);
stream << " ";
current = current->GetNext();
}
stream << "}, uses: { ";
const UsePosition* use = first_use_;
if (use != nullptr) {
do {
use->Dump(stream);
stream << " ";
} while ((use = use->GetNext()) != nullptr);
}
stream << "}, { ";
const EnvUsePosition* env_use = first_env_use_;
if (env_use != nullptr) {
do {
env_use->Dump(stream);
stream << " ";
} while ((env_use = env_use->GetNext()) != nullptr);
}
stream << "}";
stream << " is_fixed: " << is_fixed_ << ", is_split: " << IsSplit();
stream << " is_low: " << IsLowInterval();
stream << " is_high: " << IsHighInterval();
}
// Same as Dump, but adds context such as the instruction defining this interval, and
// the register currently assigned to this interval.
void DumpWithContext(std::ostream& stream, const CodeGenerator& codegen) const;
LiveInterval* GetNextSibling() const { return next_sibling_; }
LiveInterval* GetLastSibling() {
LiveInterval* result = this;
while (result->next_sibling_ != nullptr) {
result = result->next_sibling_;
}
return result;
}
// Returns the first register hint that is at least free before
// the value contained in `free_until`. If none is found, returns
// `kNoRegister`.
int FindFirstRegisterHint(size_t* free_until, const SsaLivenessAnalysis& liveness) const;
// If there is enough at the definition site to find a register (for example
// it uses the same input as the first input), returns the register as a hint.
// Returns kNoRegister otherwise.
int FindHintAtDefinition() const;
// Returns the number of required spilling slots (measured as a multiple of the
// Dex virtual register size `kVRegSize`).
size_t NumberOfSpillSlotsNeeded() const;
bool IsFloatingPoint() const {
return type_ == Primitive::kPrimFloat || type_ == Primitive::kPrimDouble;
}
// Converts the location of the interval to a `Location` object.
Location ToLocation() const;
// Returns the location of the interval following its siblings at `position`.
Location GetLocationAt(size_t position);
// Finds the sibling that is defined at `position`.
LiveInterval* GetSiblingAt(size_t position);
// Returns whether `other` and `this` share the same kind of register.
bool SameRegisterKind(Location other) const;
bool SameRegisterKind(const LiveInterval& other) const {
return IsFloatingPoint() == other.IsFloatingPoint();
}
bool HasHighInterval() const {
return IsLowInterval();
}
bool HasLowInterval() const {
return IsHighInterval();
}
LiveInterval* GetLowInterval() const {
DCHECK(HasLowInterval());
return high_or_low_interval_;
}
LiveInterval* GetHighInterval() const {
DCHECK(HasHighInterval());
return high_or_low_interval_;
}
bool IsHighInterval() const {
return GetParent()->is_high_interval_;
}
bool IsLowInterval() const {
return !IsHighInterval() && (GetParent()->high_or_low_interval_ != nullptr);
}
void SetLowInterval(LiveInterval* low) {
DCHECK(IsHighInterval());
high_or_low_interval_ = low;
}
void SetHighInterval(LiveInterval* high) {
DCHECK(IsLowInterval());
high_or_low_interval_ = high;
}
void AddHighInterval(bool is_temp = false) {
DCHECK(IsParent());
DCHECK(!HasHighInterval());
DCHECK(!HasLowInterval());
high_or_low_interval_ = new (allocator_) LiveInterval(
allocator_, type_, defined_by_, false, kNoRegister, is_temp, true);
high_or_low_interval_->high_or_low_interval_ = this;
if (first_range_ != nullptr) {
high_or_low_interval_->first_range_ = first_range_->Dup(allocator_);
high_or_low_interval_->last_range_ = high_or_low_interval_->first_range_->GetLastRange();
high_or_low_interval_->range_search_start_ = high_or_low_interval_->first_range_;
}
if (first_use_ != nullptr) {
high_or_low_interval_->first_use_ = first_use_->Dup(allocator_);
}
if (first_env_use_ != nullptr) {
high_or_low_interval_->first_env_use_ = first_env_use_->Dup(allocator_);
}
}
// Returns whether an interval, when it is non-split, is using
// the same register of one of its input.
bool IsUsingInputRegister() const {
CHECK(kIsDebugBuild) << "Function should be used only for DCHECKs";
if (defined_by_ != nullptr && !IsSplit()) {
for (const HInstruction* input : defined_by_->GetInputs()) {
LiveInterval* interval = input->GetLiveInterval();
// Find the interval that covers `defined_by`_. Calls to this function
// are made outside the linear scan, hence we need to use CoversSlow.
while (interval != nullptr && !interval->CoversSlow(defined_by_->GetLifetimePosition())) {
interval = interval->GetNextSibling();
}
// Check if both intervals have the same register of the same kind.
if (interval != nullptr
&& interval->SameRegisterKind(*this)
&& interval->GetRegister() == GetRegister()) {
return true;
}
}
}
return false;
}
// Returns whether an interval, when it is non-split, can safely use
// the same register of one of its input. Note that this method requires
// IsUsingInputRegister() to be true.
bool CanUseInputRegister() const {
CHECK(kIsDebugBuild) << "Function should be used only for DCHECKs";
DCHECK(IsUsingInputRegister());
if (defined_by_ != nullptr && !IsSplit()) {
LocationSummary* locations = defined_by_->GetLocations();
if (locations->OutputCanOverlapWithInputs()) {
return false;
}
for (const HInstruction* input : defined_by_->GetInputs()) {
LiveInterval* interval = input->GetLiveInterval();
// Find the interval that covers `defined_by`_. Calls to this function
// are made outside the linear scan, hence we need to use CoversSlow.
while (interval != nullptr && !interval->CoversSlow(defined_by_->GetLifetimePosition())) {
interval = interval->GetNextSibling();
}
if (interval != nullptr
&& interval->SameRegisterKind(*this)
&& interval->GetRegister() == GetRegister()) {
// We found the input that has the same register. Check if it is live after
// `defined_by`_.
return !interval->CoversSlow(defined_by_->GetLifetimePosition() + 1);
}
}
}
LOG(FATAL) << "Unreachable";
UNREACHABLE();
}
void AddSafepoint(HInstruction* instruction) {
SafepointPosition* safepoint = new (allocator_) SafepointPosition(instruction);
if (first_safepoint_ == nullptr) {
first_safepoint_ = last_safepoint_ = safepoint;
} else {
DCHECK_LT(last_safepoint_->GetPosition(), safepoint->GetPosition());
last_safepoint_->SetNext(safepoint);
last_safepoint_ = safepoint;
}
}
SafepointPosition* GetFirstSafepoint() const {
return first_safepoint_;
}
// Resets the starting point for range-searching queries to the first range.
// Intervals must be reset prior to starting a new linear scan over them.
void ResetSearchCache() {
range_search_start_ = first_range_;
}
bool DefinitionRequiresRegister() const {
DCHECK(IsParent());
LocationSummary* locations = defined_by_->GetLocations();
Location location = locations->Out();
// This interval is the first interval of the instruction. If the output
// of the instruction requires a register, we return the position of that instruction
// as the first register use.
if (location.IsUnallocated()) {
if ((location.GetPolicy() == Location::kRequiresRegister)
|| (location.GetPolicy() == Location::kSameAsFirstInput
&& (locations->InAt(0).IsRegister()
|| locations->InAt(0).IsRegisterPair()
|| locations->InAt(0).GetPolicy() == Location::kRequiresRegister))) {
return true;
} else if ((location.GetPolicy() == Location::kRequiresFpuRegister)
|| (location.GetPolicy() == Location::kSameAsFirstInput
&& (locations->InAt(0).IsFpuRegister()
|| locations->InAt(0).IsFpuRegisterPair()
|| locations->InAt(0).GetPolicy() == Location::kRequiresFpuRegister))) {
return true;
}
} else if (location.IsRegister() || location.IsRegisterPair()) {
return true;
}
return false;
}
private:
LiveInterval(ArenaAllocator* allocator,
Primitive::Type type,
HInstruction* defined_by = nullptr,
bool is_fixed = false,
int reg = kNoRegister,
bool is_temp = false,
bool is_high_interval = false)
: allocator_(allocator),
first_range_(nullptr),
last_range_(nullptr),
range_search_start_(nullptr),
first_safepoint_(nullptr),
last_safepoint_(nullptr),
first_use_(nullptr),
first_env_use_(nullptr),
type_(type),
next_sibling_(nullptr),
parent_(this),
register_(reg),
spill_slot_(kNoSpillSlot),
is_fixed_(is_fixed),
is_temp_(is_temp),
is_high_interval_(is_high_interval),
high_or_low_interval_(nullptr),
defined_by_(defined_by) {}
// Searches for a LiveRange that either covers the given position or is the
// first next LiveRange. Returns null if no such LiveRange exists. Ranges
// known to end before `position` can be skipped with `search_start`.
LiveRange* FindRangeAtOrAfter(size_t position, LiveRange* search_start) const {
if (kIsDebugBuild) {
if (search_start != first_range_) {
// If we are not searching the entire list of ranges, make sure we do
// not skip the range we are searching for.
if (search_start == nullptr) {
DCHECK(IsDeadAt(position));
} else if (search_start->GetStart() > position) {
DCHECK_EQ(search_start, FindRangeAtOrAfter(position, first_range_));
}
}
}
LiveRange* range;
for (range = search_start;
range != nullptr && range->GetEnd() <= position;
range = range->GetNext()) {
continue;
}
return range;
}
bool IsDefiningPosition(size_t position) const {
return IsParent() && (position == GetStart());
}
bool HasSynthesizeUseAt(size_t position) const {
UsePosition* use = first_use_;
while (use != nullptr) {
size_t use_position = use->GetPosition();
if ((use_position == position) && use->IsSynthesized()) {
return true;
}
if (use_position > position) break;
use = use->GetNext();
}
return false;
}
void AddBackEdgeUses(const HBasicBlock& block_at_use) {
DCHECK(block_at_use.IsInLoop());
if (block_at_use.GetGraph()->HasIrreducibleLoops()) {
// Linear order may not be well formed when irreducible loops are present,
// i.e. loop blocks may not be adjacent and a back edge may not be last,
// which violates assumptions made in this method.
return;
}
// Add synthesized uses at the back edge of loops to help the register allocator.
// Note that this method is called in decreasing liveness order, to faciliate adding
// uses at the head of the `first_use_` linked list. Because below
// we iterate from inner-most to outer-most, which is in increasing liveness order,
// we need to take extra care of how the `first_use_` linked list is being updated.
UsePosition* first_in_new_list = nullptr;
UsePosition* last_in_new_list = nullptr;
for (HLoopInformationOutwardIterator it(block_at_use);
!it.Done();
it.Advance()) {
HLoopInformation* current = it.Current();
if (GetDefinedBy()->GetLifetimePosition() >= current->GetHeader()->GetLifetimeStart()) {
// This interval is defined in the loop. We can stop going outward.
break;
}
// We're only adding a synthesized use at the last back edge. Adding syntehsized uses on
// all back edges is not necessary: anything used in the loop will have its use at the
// last back edge. If we want branches in a loop to have better register allocation than
// another branch, then it is the linear order we should change.
size_t back_edge_use_position = current->GetLifetimeEnd();
if ((first_use_ != nullptr) && (first_use_->GetPosition() <= back_edge_use_position)) {
// There was a use already seen in this loop. Therefore the previous call to `AddUse`
// already inserted the backedge use. We can stop going outward.
DCHECK(HasSynthesizeUseAt(back_edge_use_position));
break;
}
DCHECK(last_in_new_list == nullptr ||
back_edge_use_position > last_in_new_list->GetPosition());
UsePosition* new_use = new (allocator_) UsePosition(back_edge_use_position);
if (last_in_new_list != nullptr) {
// Going outward. The latest created use needs to point to the new use.
last_in_new_list->SetNext(new_use);
} else {
// This is the inner-most loop.
DCHECK_EQ(current, block_at_use.GetLoopInformation());
first_in_new_list = new_use;
}
last_in_new_list = new_use;
}
// Link the newly created linked list with `first_use_`.
if (last_in_new_list != nullptr) {
last_in_new_list->SetNext(first_use_);
first_use_ = first_in_new_list;
}
}
ArenaAllocator* const allocator_;
// Ranges of this interval. We need a quick access to the last range to test
// for liveness (see `IsDeadAt`).
LiveRange* first_range_;
LiveRange* last_range_;
// The first range at or after the current position of a linear scan. It is
// used to optimize range-searching queries.
LiveRange* range_search_start_;
// Safepoints where this interval is live.
SafepointPosition* first_safepoint_;
SafepointPosition* last_safepoint_;
// Uses of this interval. Note that this linked list is shared amongst siblings.
UsePosition* first_use_;
EnvUsePosition* first_env_use_;
// The instruction type this interval corresponds to.
const Primitive::Type type_;
// Live interval that is the result of a split.
LiveInterval* next_sibling_;
// The first interval from which split intervals come from.
LiveInterval* parent_;
// The register allocated to this interval.
int register_;
// The spill slot allocated to this interval.
int spill_slot_;
// Whether the interval is for a fixed register.
const bool is_fixed_;
// Whether the interval is for a temporary.
const bool is_temp_;
// Whether this interval is a synthesized interval for register pair.
const bool is_high_interval_;
// If this interval needs a register pair, the high or low equivalent.
// `is_high_interval_` tells whether this holds the low or the high.
LiveInterval* high_or_low_interval_;
// The instruction represented by this interval.
HInstruction* const defined_by_;
static constexpr int kNoRegister = -1;
static constexpr int kNoSpillSlot = -1;
ART_FRIEND_TEST(RegisterAllocatorTest, SpillInactive);
DISALLOW_COPY_AND_ASSIGN(LiveInterval);
};
/**
* Analysis that computes the liveness of instructions:
*
* (a) Non-environment uses of an instruction always make
* the instruction live.
* (b) Environment uses of an instruction whose type is
* object (that is, non-primitive), make the instruction live.
* This is due to having to keep alive objects that have
* finalizers deleting native objects.
* (c) When the graph has the debuggable property, environment uses
* of an instruction that has a primitive type make the instruction live.
* If the graph does not have the debuggable property, the environment
* use has no effect, and may get a 'none' value after register allocation.
*
* (b) and (c) are implemented through SsaLivenessAnalysis::ShouldBeLiveForEnvironment.
*/
class SsaLivenessAnalysis : public ValueObject {
public:
SsaLivenessAnalysis(HGraph* graph, CodeGenerator* codegen)
: graph_(graph),
codegen_(codegen),
block_infos_(graph->GetBlocks().size(),
nullptr,
graph->GetArena()->Adapter(kArenaAllocSsaLiveness)),
instructions_from_ssa_index_(graph->GetArena()->Adapter(kArenaAllocSsaLiveness)),
instructions_from_lifetime_position_(graph->GetArena()->Adapter(kArenaAllocSsaLiveness)),
number_of_ssa_values_(0) {
}
void Analyze();
BitVector* GetLiveInSet(const HBasicBlock& block) const {
return &block_infos_[block.GetBlockId()]->live_in_;
}
BitVector* GetLiveOutSet(const HBasicBlock& block) const {
return &block_infos_[block.GetBlockId()]->live_out_;
}
BitVector* GetKillSet(const HBasicBlock& block) const {
return &block_infos_[block.GetBlockId()]->kill_;
}
HInstruction* GetInstructionFromSsaIndex(size_t index) const {
return instructions_from_ssa_index_[index];
}
HInstruction* GetInstructionFromPosition(size_t index) const {
return instructions_from_lifetime_position_[index];
}
HBasicBlock* GetBlockFromPosition(size_t index) const {
HInstruction* instruction = GetInstructionFromPosition(index);
if (instruction == nullptr) {
// If we are at a block boundary, get the block following.
instruction = GetInstructionFromPosition(index + 1);
}
return instruction->GetBlock();
}
bool IsAtBlockBoundary(size_t index) const {
return GetInstructionFromPosition(index) == nullptr;
}
HInstruction* GetTempUser(LiveInterval* temp) const {
// A temporary shares the same lifetime start as the instruction that requires it.
DCHECK(temp->IsTemp());
HInstruction* user = GetInstructionFromPosition(temp->GetStart() / 2);
DCHECK_EQ(user, temp->GetFirstUse()->GetUser());
return user;
}
size_t GetTempIndex(LiveInterval* temp) const {
// We use the input index to store the index of the temporary in the user's temporary list.
DCHECK(temp->IsTemp());
return temp->GetFirstUse()->GetInputIndex();
}
size_t GetMaxLifetimePosition() const {
return instructions_from_lifetime_position_.size() * 2 - 1;
}
size_t GetNumberOfSsaValues() const {
return number_of_ssa_values_;
}
static constexpr const char* kLivenessPassName = "liveness";
private:
// Give an SSA number to each instruction that defines a value used by another instruction,
// and setup the lifetime information of each instruction and block.
void NumberInstructions();
// Compute live ranges of instructions, as well as live_in, live_out and kill sets.
void ComputeLiveness();
// Compute the live ranges of instructions, as well as the initial live_in, live_out and
// kill sets, that do not take into account backward branches.
void ComputeLiveRanges();
// After computing the initial sets, this method does a fixed point
// calculation over the live_in and live_out set to take into account
// backwards branches.
void ComputeLiveInAndLiveOutSets();
// Update the live_in set of the block and returns whether it has changed.
bool UpdateLiveIn(const HBasicBlock& block);
// Update the live_out set of the block and returns whether it has changed.
bool UpdateLiveOut(const HBasicBlock& block);
// Returns whether `instruction` in an HEnvironment held by `env_holder`
// should be kept live by the HEnvironment.
static bool ShouldBeLiveForEnvironment(HInstruction* env_holder, HInstruction* instruction) {
if (instruction == nullptr) return false;
// A value that's not live in compiled code may still be needed in interpreter,
// due to code motion, etc.
if (env_holder->IsDeoptimize()) return true;
// A value live at a throwing instruction in a try block may be copied by
// the exception handler to its location at the top of the catch block.
if (env_holder->CanThrowIntoCatchBlock()) return true;
if (instruction->GetBlock()->GetGraph()->IsDebuggable()) return true;
return instruction->GetType() == Primitive::kPrimNot;
}
void CheckNoLiveInIrreducibleLoop(const HBasicBlock& block) const {
if (!block.IsLoopHeader() || !block.GetLoopInformation()->IsIrreducible()) {
return;
}
BitVector* live_in = GetLiveInSet(block);
// To satisfy our liveness algorithm, we need to ensure loop headers of
// irreducible loops do not have any live-in instructions, except constants
// and the current method, which can be trivially re-materialized.
for (uint32_t idx : live_in->Indexes()) {
HInstruction* instruction = GetInstructionFromSsaIndex(idx);
DCHECK(instruction->GetBlock()->IsEntryBlock()) << instruction->DebugName();
DCHECK(!instruction->IsParameterValue());
DCHECK(instruction->IsCurrentMethod() || instruction->IsConstant())
<< instruction->DebugName();
}
}
HGraph* const graph_;
CodeGenerator* const codegen_;
ArenaVector<BlockInfo*> block_infos_;
// Temporary array used when computing live_in, live_out, and kill sets.
ArenaVector<HInstruction*> instructions_from_ssa_index_;
// Temporary array used when inserting moves in the graph.
ArenaVector<HInstruction*> instructions_from_lifetime_position_;
size_t number_of_ssa_values_;
ART_FRIEND_TEST(RegisterAllocatorTest, SpillInactive);
ART_FRIEND_TEST(RegisterAllocatorTest, FreeUntil);
DISALLOW_COPY_AND_ASSIGN(SsaLivenessAnalysis);
};
} // namespace art
#endif // ART_COMPILER_OPTIMIZING_SSA_LIVENESS_ANALYSIS_H_