blob: b538a89a06f11da0da2d5e42577eb9ae52fa1c39 [file] [log] [blame]
/*
* Copyright (C) 2014 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ssa_liveness_analysis.h"
#include "base/bit_vector-inl.h"
#include "code_generator.h"
#include "linear_order.h"
#include "nodes.h"
namespace art {
void SsaLivenessAnalysis::Analyze() {
// Compute the linear order directly in the graph's data structure
// (there are no more following graph mutations).
LinearizeGraph(graph_, graph_->GetArena(), &graph_->linear_order_);
// Liveness analysis.
NumberInstructions();
ComputeLiveness();
}
void SsaLivenessAnalysis::NumberInstructions() {
int ssa_index = 0;
size_t lifetime_position = 0;
// Each instruction gets a lifetime position, and a block gets a lifetime
// start and end position. Non-phi instructions have a distinct lifetime position than
// the block they are in. Phi instructions have the lifetime start of their block as
// lifetime position.
//
// Because the register allocator will insert moves in the graph, we need
// to differentiate between the start and end of an instruction. Adding 2 to
// the lifetime position for each instruction ensures the start of an
// instruction is different than the end of the previous instruction.
for (HBasicBlock* block : graph_->GetLinearOrder()) {
block->SetLifetimeStart(lifetime_position);
for (HInstructionIterator inst_it(block->GetPhis()); !inst_it.Done(); inst_it.Advance()) {
HInstruction* current = inst_it.Current();
codegen_->AllocateLocations(current);
LocationSummary* locations = current->GetLocations();
if (locations != nullptr && locations->Out().IsValid()) {
instructions_from_ssa_index_.push_back(current);
current->SetSsaIndex(ssa_index++);
current->SetLiveInterval(
LiveInterval::MakeInterval(graph_->GetArena(), current->GetType(), current));
}
current->SetLifetimePosition(lifetime_position);
}
lifetime_position += 2;
// Add a null marker to notify we are starting a block.
instructions_from_lifetime_position_.push_back(nullptr);
for (HInstructionIterator inst_it(block->GetInstructions()); !inst_it.Done();
inst_it.Advance()) {
HInstruction* current = inst_it.Current();
codegen_->AllocateLocations(current);
LocationSummary* locations = current->GetLocations();
if (locations != nullptr && locations->Out().IsValid()) {
instructions_from_ssa_index_.push_back(current);
current->SetSsaIndex(ssa_index++);
current->SetLiveInterval(
LiveInterval::MakeInterval(graph_->GetArena(), current->GetType(), current));
}
instructions_from_lifetime_position_.push_back(current);
current->SetLifetimePosition(lifetime_position);
lifetime_position += 2;
}
block->SetLifetimeEnd(lifetime_position);
}
number_of_ssa_values_ = ssa_index;
}
void SsaLivenessAnalysis::ComputeLiveness() {
for (HBasicBlock* block : graph_->GetLinearOrder()) {
block_infos_[block->GetBlockId()] =
new (graph_->GetArena()) BlockInfo(graph_->GetArena(), *block, number_of_ssa_values_);
}
// Compute the live ranges, as well as the initial live_in, live_out, and kill sets.
// This method does not handle backward branches for the sets, therefore live_in
// and live_out sets are not yet correct.
ComputeLiveRanges();
// Do a fixed point calculation to take into account backward branches,
// that will update live_in of loop headers, and therefore live_out and live_in
// of blocks in the loop.
ComputeLiveInAndLiveOutSets();
}
static void RecursivelyProcessInputs(HInstruction* current,
HInstruction* actual_user,
BitVector* live_in) {
HInputsRef inputs = current->GetInputs();
for (size_t i = 0; i < inputs.size(); ++i) {
HInstruction* input = inputs[i];
bool has_in_location = current->GetLocations()->InAt(i).IsValid();
bool has_out_location = input->GetLocations()->Out().IsValid();
if (has_in_location) {
DCHECK(has_out_location)
<< "Instruction " << current->DebugName() << current->GetId()
<< " expects an input value at index " << i << " but "
<< input->DebugName() << input->GetId() << " does not produce one.";
DCHECK(input->HasSsaIndex());
// `input` generates a result used by `current`. Add use and update
// the live-in set.
input->GetLiveInterval()->AddUse(current, /* environment */ nullptr, i, actual_user);
live_in->SetBit(input->GetSsaIndex());
} else if (has_out_location) {
// `input` generates a result but it is not used by `current`.
} else {
// `input` is inlined into `current`. Walk over its inputs and record
// uses at `current`.
DCHECK(input->IsEmittedAtUseSite());
// Check that the inlined input is not a phi. Recursing on loop phis could
// lead to an infinite loop.
DCHECK(!input->IsPhi());
RecursivelyProcessInputs(input, actual_user, live_in);
}
}
}
void SsaLivenessAnalysis::ComputeLiveRanges() {
// Do a post order visit, adding inputs of instructions live in the block where
// that instruction is defined, and killing instructions that are being visited.
for (HBasicBlock* block : ReverseRange(graph_->GetLinearOrder())) {
BitVector* kill = GetKillSet(*block);
BitVector* live_in = GetLiveInSet(*block);
// Set phi inputs of successors of this block corresponding to this block
// as live_in.
for (HBasicBlock* successor : block->GetSuccessors()) {
live_in->Union(GetLiveInSet(*successor));
if (successor->IsCatchBlock()) {
// Inputs of catch phis will be kept alive through their environment
// uses, allowing the runtime to copy their values to the corresponding
// catch phi spill slots when an exception is thrown.
// The only instructions which may not be recorded in the environments
// are constants created by the SSA builder as typed equivalents of
// untyped constants from the bytecode, or phis with only such constants
// as inputs (verified by GraphChecker). Their raw binary value must
// therefore be the same and we only need to keep alive one.
} else {
size_t phi_input_index = successor->GetPredecessorIndexOf(block);
for (HInstructionIterator phi_it(successor->GetPhis()); !phi_it.Done(); phi_it.Advance()) {
HInstruction* phi = phi_it.Current();
HInstruction* input = phi->InputAt(phi_input_index);
input->GetLiveInterval()->AddPhiUse(phi, phi_input_index, block);
// A phi input whose last user is the phi dies at the end of the predecessor block,
// and not at the phi's lifetime position.
live_in->SetBit(input->GetSsaIndex());
}
}
}
// Add a range that covers this block to all instructions live_in because of successors.
// Instructions defined in this block will have their start of the range adjusted.
for (uint32_t idx : live_in->Indexes()) {
HInstruction* current = GetInstructionFromSsaIndex(idx);
current->GetLiveInterval()->AddRange(block->GetLifetimeStart(), block->GetLifetimeEnd());
}
for (HBackwardInstructionIterator back_it(block->GetInstructions()); !back_it.Done();
back_it.Advance()) {
HInstruction* current = back_it.Current();
if (current->HasSsaIndex()) {
// Kill the instruction and shorten its interval.
kill->SetBit(current->GetSsaIndex());
live_in->ClearBit(current->GetSsaIndex());
current->GetLiveInterval()->SetFrom(current->GetLifetimePosition());
}
// Process the environment first, because we know their uses come after
// or at the same liveness position of inputs.
for (HEnvironment* environment = current->GetEnvironment();
environment != nullptr;
environment = environment->GetParent()) {
// Handle environment uses. See statements (b) and (c) of the
// SsaLivenessAnalysis.
for (size_t i = 0, e = environment->Size(); i < e; ++i) {
HInstruction* instruction = environment->GetInstructionAt(i);
bool should_be_live = ShouldBeLiveForEnvironment(current, instruction);
if (should_be_live) {
DCHECK(instruction->HasSsaIndex());
live_in->SetBit(instruction->GetSsaIndex());
}
if (instruction != nullptr) {
instruction->GetLiveInterval()->AddUse(
current, environment, i, /* actual_user */ nullptr, should_be_live);
}
}
}
// Process inputs of instructions.
if (current->IsEmittedAtUseSite()) {
if (kIsDebugBuild) {
DCHECK(!current->GetLocations()->Out().IsValid());
for (const HUseListNode<HInstruction*>& use : current->GetUses()) {
HInstruction* user = use.GetUser();
size_t index = use.GetIndex();
DCHECK(!user->GetLocations()->InAt(index).IsValid());
}
DCHECK(!current->HasEnvironmentUses());
}
} else {
RecursivelyProcessInputs(current, current, live_in);
}
}
// Kill phis defined in this block.
for (HInstructionIterator inst_it(block->GetPhis()); !inst_it.Done(); inst_it.Advance()) {
HInstruction* current = inst_it.Current();
if (current->HasSsaIndex()) {
kill->SetBit(current->GetSsaIndex());
live_in->ClearBit(current->GetSsaIndex());
LiveInterval* interval = current->GetLiveInterval();
DCHECK((interval->GetFirstRange() == nullptr)
|| (interval->GetStart() == current->GetLifetimePosition()));
interval->SetFrom(current->GetLifetimePosition());
}
}
if (block->IsLoopHeader()) {
if (kIsDebugBuild) {
CheckNoLiveInIrreducibleLoop(*block);
}
size_t last_position = block->GetLoopInformation()->GetLifetimeEnd();
// For all live_in instructions at the loop header, we need to create a range
// that covers the full loop.
for (uint32_t idx : live_in->Indexes()) {
HInstruction* current = GetInstructionFromSsaIndex(idx);
current->GetLiveInterval()->AddLoopRange(block->GetLifetimeStart(), last_position);
}
}
}
}
void SsaLivenessAnalysis::ComputeLiveInAndLiveOutSets() {
bool changed;
do {
changed = false;
for (const HBasicBlock* block : graph_->GetPostOrder()) {
// The live_in set depends on the kill set (which does not
// change in this loop), and the live_out set. If the live_out
// set does not change, there is no need to update the live_in set.
if (UpdateLiveOut(*block) && UpdateLiveIn(*block)) {
if (kIsDebugBuild) {
CheckNoLiveInIrreducibleLoop(*block);
}
changed = true;
}
}
} while (changed);
}
bool SsaLivenessAnalysis::UpdateLiveOut(const HBasicBlock& block) {
BitVector* live_out = GetLiveOutSet(block);
bool changed = false;
// The live_out set of a block is the union of live_in sets of its successors.
for (HBasicBlock* successor : block.GetSuccessors()) {
if (live_out->Union(GetLiveInSet(*successor))) {
changed = true;
}
}
return changed;
}
bool SsaLivenessAnalysis::UpdateLiveIn(const HBasicBlock& block) {
BitVector* live_out = GetLiveOutSet(block);
BitVector* kill = GetKillSet(block);
BitVector* live_in = GetLiveInSet(block);
// If live_out is updated (because of backward branches), we need to make
// sure instructions in live_out are also in live_in, unless they are killed
// by this block.
return live_in->UnionIfNotIn(live_out, kill);
}
void LiveInterval::DumpWithContext(std::ostream& stream,
const CodeGenerator& codegen) const {
Dump(stream);
if (IsFixed()) {
stream << ", register:" << GetRegister() << "(";
if (IsFloatingPoint()) {
codegen.DumpFloatingPointRegister(stream, GetRegister());
} else {
codegen.DumpCoreRegister(stream, GetRegister());
}
stream << ")";
} else {
stream << ", spill slot:" << GetSpillSlot();
}
stream << ", requires_register:" << (GetDefinedBy() != nullptr && RequiresRegister());
if (GetParent()->GetDefinedBy() != nullptr) {
stream << ", defined_by:" << GetParent()->GetDefinedBy()->GetKind();
stream << "(" << GetParent()->GetDefinedBy()->GetLifetimePosition() << ")";
}
}
static int RegisterOrLowRegister(Location location) {
return location.IsPair() ? location.low() : location.reg();
}
int LiveInterval::FindFirstRegisterHint(size_t* free_until,
const SsaLivenessAnalysis& liveness) const {
DCHECK(!IsHighInterval());
if (IsTemp()) return kNoRegister;
if (GetParent() == this && defined_by_ != nullptr) {
// This is the first interval for the instruction. Try to find
// a register based on its definition.
DCHECK_EQ(defined_by_->GetLiveInterval(), this);
int hint = FindHintAtDefinition();
if (hint != kNoRegister && free_until[hint] > GetStart()) {
return hint;
}
}
if (IsSplit() && liveness.IsAtBlockBoundary(GetStart() / 2)) {
// If the start of this interval is at a block boundary, we look at the
// location of the interval in blocks preceding the block this interval
// starts at. If one location is a register we return it as a hint. This
// will avoid a move between the two blocks.
HBasicBlock* block = liveness.GetBlockFromPosition(GetStart() / 2);
size_t next_register_use = FirstRegisterUse();
for (HBasicBlock* predecessor : block->GetPredecessors()) {
size_t position = predecessor->GetLifetimeEnd() - 1;
// We know positions above GetStart() do not have a location yet.
if (position < GetStart()) {
LiveInterval* existing = GetParent()->GetSiblingAt(position);
if (existing != nullptr
&& existing->HasRegister()
// It's worth using that register if it is available until
// the next use.
&& (free_until[existing->GetRegister()] >= next_register_use)) {
return existing->GetRegister();
}
}
}
}
UsePosition* use = first_use_;
size_t start = GetStart();
size_t end = GetEnd();
while (use != nullptr && use->GetPosition() <= end) {
size_t use_position = use->GetPosition();
if (use_position >= start && !use->IsSynthesized()) {
HInstruction* user = use->GetUser();
size_t input_index = use->GetInputIndex();
if (user->IsPhi()) {
// If the phi has a register, try to use the same.
Location phi_location = user->GetLiveInterval()->ToLocation();
if (phi_location.IsRegisterKind()) {
DCHECK(SameRegisterKind(phi_location));
int reg = RegisterOrLowRegister(phi_location);
if (free_until[reg] >= use_position) {
return reg;
}
}
// If the instruction dies at the phi assignment, we can try having the
// same register.
if (end == user->GetBlock()->GetPredecessors()[input_index]->GetLifetimeEnd()) {
HInputsRef inputs = user->GetInputs();
for (size_t i = 0; i < inputs.size(); ++i) {
if (i == input_index) {
continue;
}
Location location = inputs[i]->GetLiveInterval()->GetLocationAt(
user->GetBlock()->GetPredecessors()[i]->GetLifetimeEnd() - 1);
if (location.IsRegisterKind()) {
int reg = RegisterOrLowRegister(location);
if (free_until[reg] >= use_position) {
return reg;
}
}
}
}
} else {
// If the instruction is expected in a register, try to use it.
LocationSummary* locations = user->GetLocations();
Location expected = locations->InAt(use->GetInputIndex());
// We use the user's lifetime position - 1 (and not `use_position`) because the
// register is blocked at the beginning of the user.
size_t position = user->GetLifetimePosition() - 1;
if (expected.IsRegisterKind()) {
DCHECK(SameRegisterKind(expected));
int reg = RegisterOrLowRegister(expected);
if (free_until[reg] >= position) {
return reg;
}
}
}
}
use = use->GetNext();
}
return kNoRegister;
}
int LiveInterval::FindHintAtDefinition() const {
if (defined_by_->IsPhi()) {
// Try to use the same register as one of the inputs.
const ArenaVector<HBasicBlock*>& predecessors = defined_by_->GetBlock()->GetPredecessors();
HInputsRef inputs = defined_by_->GetInputs();
for (size_t i = 0; i < inputs.size(); ++i) {
size_t end = predecessors[i]->GetLifetimeEnd();
LiveInterval* input_interval = inputs[i]->GetLiveInterval()->GetSiblingAt(end - 1);
if (input_interval->GetEnd() == end) {
// If the input dies at the end of the predecessor, we know its register can
// be reused.
Location input_location = input_interval->ToLocation();
if (input_location.IsRegisterKind()) {
DCHECK(SameRegisterKind(input_location));
return RegisterOrLowRegister(input_location);
}
}
}
} else {
LocationSummary* locations = GetDefinedBy()->GetLocations();
Location out = locations->Out();
if (out.IsUnallocated() && out.GetPolicy() == Location::kSameAsFirstInput) {
// Try to use the same register as the first input.
LiveInterval* input_interval =
GetDefinedBy()->InputAt(0)->GetLiveInterval()->GetSiblingAt(GetStart() - 1);
if (input_interval->GetEnd() == GetStart()) {
// If the input dies at the start of this instruction, we know its register can
// be reused.
Location location = input_interval->ToLocation();
if (location.IsRegisterKind()) {
DCHECK(SameRegisterKind(location));
return RegisterOrLowRegister(location);
}
}
}
}
return kNoRegister;
}
bool LiveInterval::SameRegisterKind(Location other) const {
if (IsFloatingPoint()) {
if (IsLowInterval() || IsHighInterval()) {
return other.IsFpuRegisterPair();
} else {
return other.IsFpuRegister();
}
} else {
if (IsLowInterval() || IsHighInterval()) {
return other.IsRegisterPair();
} else {
return other.IsRegister();
}
}
}
size_t LiveInterval::NumberOfSpillSlotsNeeded() const {
// For a SIMD operation, compute the number of needed spill slots.
// TODO: do through vector type?
HInstruction* definition = GetParent()->GetDefinedBy();
if (definition != nullptr && definition->IsVecOperation()) {
return definition->AsVecOperation()->GetVectorNumberOfBytes() / kVRegSize;
}
// Return number of needed spill slots based on type.
return (type_ == Primitive::kPrimLong || type_ == Primitive::kPrimDouble) ? 2 : 1;
}
Location LiveInterval::ToLocation() const {
DCHECK(!IsHighInterval());
if (HasRegister()) {
if (IsFloatingPoint()) {
if (HasHighInterval()) {
return Location::FpuRegisterPairLocation(GetRegister(), GetHighInterval()->GetRegister());
} else {
return Location::FpuRegisterLocation(GetRegister());
}
} else {
if (HasHighInterval()) {
return Location::RegisterPairLocation(GetRegister(), GetHighInterval()->GetRegister());
} else {
return Location::RegisterLocation(GetRegister());
}
}
} else {
HInstruction* defined_by = GetParent()->GetDefinedBy();
if (defined_by->IsConstant()) {
return defined_by->GetLocations()->Out();
} else if (GetParent()->HasSpillSlot()) {
switch (NumberOfSpillSlotsNeeded()) {
case 1: return Location::StackSlot(GetParent()->GetSpillSlot());
case 2: return Location::DoubleStackSlot(GetParent()->GetSpillSlot());
case 4: return Location::SIMDStackSlot(GetParent()->GetSpillSlot());
default: LOG(FATAL) << "Unexpected number of spill slots"; UNREACHABLE();
}
} else {
return Location();
}
}
}
Location LiveInterval::GetLocationAt(size_t position) {
LiveInterval* sibling = GetSiblingAt(position);
DCHECK(sibling != nullptr);
return sibling->ToLocation();
}
LiveInterval* LiveInterval::GetSiblingAt(size_t position) {
LiveInterval* current = this;
while (current != nullptr && !current->IsDefinedAt(position)) {
current = current->GetNextSibling();
}
return current;
}
} // namespace art