blob: d0b3cf9abeae41aef5346aa19fc60db94eac3a2e [file] [log] [blame]
#!/bin/bash
#
# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Set up prog to be the path of this script, including following symlinks,
# and set up progdir to be the fully-qualified pathname of its directory.
prog="$0"
while [ -h "${prog}" ]; do
newProg=`/bin/ls -ld "${prog}"`
newProg=`expr "${newProg}" : ".* -> \(.*\)$"`
if expr "x${newProg}" : 'x/' >/dev/null; then
prog="${newProg}"
else
progdir=`dirname "${prog}"`
prog="${progdir}/${newProg}"
fi
done
oldwd=`pwd`
progdir=`dirname "${prog}"`
cd "${progdir}"
progdir=`pwd`
prog="${progdir}"/`basename "${prog}"`
run_args=""
usage="no"
sequental="no"
while true; do
if [ "x$1" = "x--host" ]; then
run_args="${run_args} --host"
shift
elif [ "x$1" = "x--jvm" ]; then
run_args="${run_args} --jvm"
shift
elif [ "x$1" = "x--debug" ]; then
run_args="${run_args} --debug"
shift
elif [ "x$1" = "x--zygote" ]; then
run_args="${run_args} --zygote"
shift
elif [ "x$1" = "x--interpreter" ]; then
run_args="${run_args} --interpreter"
shift
elif [ "x$1" = "x--jit" ]; then
run_args="${run_args} --jit"
shift
elif [ "x$1" = "x--no-verify" ]; then
run_args="${run_args} --no-verify"
shift
elif [ "x$1" = "x--no-optimize" ]; then
run_args="${run_args} --no-optimize"
shift
elif [ "x$1" = "x--valgrind" ]; then
run_args="${run_args} --valgrind"
shift
elif [ "x$1" = "x--dev" ]; then
run_args="${run_args} --dev"
shift
elif [ "x$1" = "x--update" ]; then
run_args="${run_args} --update"
shift
elif [ "x$1" = "x--help" ]; then
usage="yes"
shift
elif [ "x$1" = "x--seq" ]; then
sequental="yes"
shift
elif [ "x$1" = "x-O" ]; then
run_args="${run_args} -O"
shift
elif [ "x$1" = "x--64" ]; then
run_args="${run_args} --64"
shift
elif [ "x$1" = "x--gcstress" ]; then
run_args="${run_args} --gcstress"
shift
elif [ "x$1" = "x--gcverify" ]; then
run_args="${run_args} --gcverify"
shift
elif [ "x$1" = "x--trace" ]; then
run_args="${run_args} --trace"
shift
elif [ "x$1" = "x--relocate" ]; then
run_args="${run_args} --relocate"
shift
elif [ "x$1" = "x--no-relocate" ]; then
run_args="${run_args} --no-relocate"
shift
elif [ "x$1" = "x--no-prebuild" ]; then
run_args="${run_args} --no-prebuild"
shift;
elif [ "x$1" = "x--prebuild" ]; then
run_args="${run_args} --prebuild"
shift;
elif [ "x$1" = "x--no-dex2oat" ]; then
run_args="${run_args} --no-dex2oat"
shift;
elif [ "x$1" = "x--no-patchoat" ]; then
run_args="${run_args} --no-patchoat"
shift;
elif [ "x$1" = "x--always-clean" ]; then
run_args="${run_args} --always-clean"
elif expr "x$1" : "x--" >/dev/null 2>&1; then
echo "unknown $0 option: $1" 1>&2
usage="yes"
break
else
break
fi
done
if [ "$usage" = "yes" ]; then
prog=`basename $prog`
(
echo "usage:"
echo " $prog --help Print this message."
echo " $prog [options] Run all tests with the given options."
echo " Options are all passed to run-test; refer to that for " \
"further documentation:"
echo " --debug --dev --host --interpreter --jit --jvm --no-optimize"
echo " --no-verify -O --update --valgrind --zygote --64 --relocate"
echo " --prebuild --always-clean --gcstress --gcverify --trace"
echo " --no-patchoat --no-dex2oat"
echo " Specific Runtime Options:"
echo " --seq Run tests one-by-one, avoiding failures caused by busy CPU"
) 1>&2
exit 1
fi
if [ "$sequental" == "yes" ]; then
i=0
for test_name in *; do
if [ -d "$test_name" -a -r "$test_name" -a -r "$test_name/info.txt" ]; then
./run-test ${run_args} "$test_name"
RES=$?
test_pids[i]=i
test_names[test_pids[i]]="$test_name"
if [ "$RES" != "0" ]; then
let failure_count+=1
failed_test_names="$failed_test_names ${test_names[i]}"
else
let succeeded_count+=1
fi
let i+=1
fi
done
else
# start all the tests
i=0
for test_name in *; do
if [ -d "$test_name" -a -r "$test_name" -a -r "$test_name/info.txt" ]; then
./run-test ${run_args} "$test_name" &
test_pids[i]=$!
test_names[test_pids[i]]="$test_name"
let i+=1
fi
done
# wait for all the tests, collecting the failures
failure_count=0
succeeded_count=0
failed_test_names=""
for pid in ${test_pids[@]}; do
wait $pid
if [ "$?" != "0" ]; then
let failure_count+=1
failed_test_names="$failed_test_names ${test_names[$pid]}[pid=$pid]"
else
let succeeded_count+=1
fi
done
fi
echo "succeeded tests: $succeeded_count"
echo "failed tests: $failure_count"
for i in $failed_test_names; do
echo "failed: $i"
done