blob: 5ae588142762bc3571dbeb305584e622c673048a [file] [log] [blame]
#
# Copyright (C) 2011 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
LOCAL_PATH := $(call my-dir)
art_path := $(LOCAL_PATH)
########################################################################
# clean-oat rules
#
include $(art_path)/build/Android.common_path.mk
include $(art_path)/build/Android.oat.mk
.PHONY: clean-oat
clean-oat: clean-oat-host clean-oat-target
.PHONY: clean-oat-host
clean-oat-host:
find $(OUT_DIR) '(' -name '*.oat' -o -name '*.odex' -o -name '*.art' -o -name '*.vdex' ')' -a -type f | xargs rm -f
rm -rf $(TMPDIR)/*/test-*/dalvik-cache/*
rm -rf $(TMPDIR)/android-data/dalvik-cache/*
.PHONY: clean-oat-target
clean-oat-target:
$(ADB) root
$(ADB) wait-for-device remount
$(ADB) shell rm -rf $(ART_TARGET_NATIVETEST_DIR)
$(ADB) shell rm -rf $(ART_TARGET_TEST_DIR)
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*/*
$(ADB) shell rm -rf $(ART_DEXPREOPT_BOOT_JAR_DIR)/$(DEX2OAT_TARGET_ARCH)
$(ADB) shell rm -rf system/app/$(DEX2OAT_TARGET_ARCH)
ifdef TARGET_2ND_ARCH
$(ADB) shell rm -rf $(ART_DEXPREOPT_BOOT_JAR_DIR)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)
$(ADB) shell rm -rf system/app/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)
endif
$(ADB) shell rm -rf data/run-test/test-*/dalvik-cache/*
########################################################################
# cpplint rules to style check art source files
include $(art_path)/build/Android.cpplint.mk
########################################################################
# product rules
include $(art_path)/oatdump/Android.mk
include $(art_path)/tools/ahat/Android.mk
include $(art_path)/tools/dexfuzz/Android.mk
include $(art_path)/tools/veridex/Android.mk
ART_HOST_DEPENDENCIES := \
$(ART_HOST_EXECUTABLES) \
$(ART_HOST_DEX_DEPENDENCIES) \
$(ART_HOST_SHARED_LIBRARY_DEPENDENCIES)
ifeq ($(ART_BUILD_HOST_DEBUG),true)
ART_HOST_DEPENDENCIES += $(ART_HOST_SHARED_LIBRARY_DEBUG_DEPENDENCIES)
endif
ART_TARGET_DEPENDENCIES := \
$(ART_TARGET_DEX_DEPENDENCIES)
########################################################################
# test rules
# All the dependencies that must be built ahead of sync-ing them onto the target device.
TEST_ART_TARGET_SYNC_DEPS := $(ADB_EXECUTABLE)
include $(art_path)/build/Android.common_test.mk
include $(art_path)/build/Android.gtest.mk
include $(art_path)/test/Android.run-test.mk
TEST_ART_TARGET_SYNC_DEPS += $(ART_TEST_TARGET_GTEST_DEPENDENCIES) $(ART_TEST_TARGET_RUN_TEST_DEPENDENCIES)
# Make sure /system is writable on the device.
TEST_ART_ADB_ROOT_AND_REMOUNT := \
($(ADB) root && \
$(ADB) wait-for-device remount && \
(($(ADB) shell touch /system/testfile && \
($(ADB) shell rm /system/testfile || true)) || \
($(ADB) disable-verity && \
$(ADB) reboot && \
$(ADB) wait-for-device root && \
$(ADB) wait-for-device remount)))
# "mm test-art" to build and run all tests on host and device
.PHONY: test-art
test-art: test-art-host test-art-target
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-gtest
test-art-gtest: test-art-host-gtest test-art-target-gtest
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-run-test
test-art-run-test: test-art-host-run-test test-art-target-run-test
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
########################################################################
# host test rules
VIXL_TEST_DEPENDENCY :=
# We can only run the vixl tests on 64-bit hosts (vixl testing issue) when its a
# top-level build (to declare the vixl test rule).
ifneq ($(HOST_PREFER_32_BIT),true)
ifeq ($(ONE_SHOT_MAKEFILE),)
VIXL_TEST_DEPENDENCY := run-vixl-tests
endif
endif
.PHONY: test-art-host-vixl
test-art-host-vixl: $(VIXL_TEST_DEPENDENCY)
# "mm test-art-host" to build and run all host tests.
.PHONY: test-art-host
test-art-host: test-art-host-gtest test-art-host-run-test \
test-art-host-vixl test-art-host-dexdump
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely with the default compiler.
.PHONY: test-art-host-default
test-art-host-default: test-art-host-run-test-default
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely with the optimizing compiler.
.PHONY: test-art-host-optimizing
test-art-host-optimizing: test-art-host-run-test-optimizing
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely on the interpreter.
.PHONY: test-art-host-interpreter
test-art-host-interpreter: test-art-host-run-test-interpreter
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely on the jit.
.PHONY: test-art-host-jit
test-art-host-jit: test-art-host-run-test-jit
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Primary host architecture variants:
.PHONY: test-art-host$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(ART_PHONY_TEST_HOST_SUFFIX) \
test-art-host-run-test$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Secondary host architecture variants:
ifneq ($(HOST_PREFER_32_BIT),true)
.PHONY: test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(2ND_ART_PHONY_TEST_HOST_SUFFIX) \
test-art-host-run-test$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
endif
# Dexdump/list regression test.
.PHONY: test-art-host-dexdump
test-art-host-dexdump: $(addprefix $(HOST_OUT_EXECUTABLES)/, dexdump dexlist)
ANDROID_HOST_OUT=$(realpath $(HOST_OUT)) art/test/dexdump/run-all-tests
########################################################################
# target test rules
# "mm test-art-target" to build and run all target tests.
.PHONY: test-art-target
test-art-target: test-art-target-gtest test-art-target-run-test
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely with the default compiler.
.PHONY: test-art-target-default
test-art-target-default: test-art-target-run-test-default
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely with the optimizing compiler.
.PHONY: test-art-target-optimizing
test-art-target-optimizing: test-art-target-run-test-optimizing
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely on the interpreter.
.PHONY: test-art-target-interpreter
test-art-target-interpreter: test-art-target-run-test-interpreter
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely on the jit.
.PHONY: test-art-target-jit
test-art-target-jit: test-art-target-run-test-jit
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Primary target architecture variants:
.PHONY: test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(ART_PHONY_TEST_TARGET_SUFFIX) \
test-art-target-run-test$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Secondary target architecture variants:
ifdef 2ND_ART_PHONY_TEST_TARGET_SUFFIX
.PHONY: test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) \
test-art-target-run-test$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
endif
#######################
# ART APEX.
include $(CLEAR_VARS)
# The ART APEX comes in three flavors:
# - the release module (`com.android.art.release`), containing
# only "release" artifacts;
# - the debug module (`com.android.art.debug`), containing both
# "release" and "debug" artifacts, as well as additional tools;
# - the testing module (`com.android.art.testing`), containing
# both "release" and "debug" artifacts, as well as additional tools
# and ART gtests).
#
# The ART APEX module (`com.android.art`) is an "alias" for either the
# release or the debug module. By default, "user" build variants contain
# the release module, while "userdebug" and "eng" build variants contain
# the debug module. However, if `PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD`
# is defined, it overrides the previous logic:
# - if `PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD` is set to `false`, the
# build will include the release module (whatever the build
# variant);
# - if `PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD` is set to `true`, the
# build will include the debug module (whatever the build variant).
art_target_include_debug_build := $(PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD)
ifneq (false,$(art_target_include_debug_build))
ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
art_target_include_debug_build := true
endif
endif
ifeq (true,$(art_target_include_debug_build))
# Module with both release and debug variants, as well as
# additional tools.
TARGET_ART_APEX := $(DEBUG_ART_APEX)
APEX_TEST_MODULE := art-check-debug-apex-gen-fakebin
else
# Release module (without debug variants nor tools).
TARGET_ART_APEX := $(RELEASE_ART_APEX)
APEX_TEST_MODULE := art-check-release-apex-gen-fakebin
endif
LOCAL_MODULE := com.android.art
LOCAL_REQUIRED_MODULES := $(TARGET_ART_APEX)
LOCAL_REQUIRED_MODULES += art_apex_boot_integrity
# Clear locally used variable.
art_target_include_debug_build :=
include $(BUILD_PHONY_PACKAGE)
include $(CLEAR_VARS)
LOCAL_MODULE := com.android.art
LOCAL_IS_HOST_MODULE := true
ifneq ($(HOST_OS),darwin)
LOCAL_REQUIRED_MODULES += $(APEX_TEST_MODULE)
endif
include $(BUILD_PHONY_PACKAGE)
# Create canonical name -> file name symlink in the symbol directory
# The symbol files for the debug or release variant are installed to
# $(TARGET_OUT_UNSTRIPPED)/$(TARGET_ART_APEX) directory. However,
# since they are available via /apex/com.android.art at runtime
# regardless of which variant is installed, create a symlink so that
# $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art is linked to
# $(TARGET_OUT_UNSTRIPPED)/apex/$(TARGET_ART_APEX).
# Note that installation of the symlink is triggered by the apex_manifest.pb
# file which is the file that is guaranteed to be created regardless of the
# value of TARGET_FLATTEN_APEX.
ifeq ($(TARGET_FLATTEN_APEX),true)
art_apex_manifest_file := $(PRODUCT_OUT)/system/apex/$(TARGET_ART_APEX)/apex_manifest.pb
else
art_apex_manifest_file := $(PRODUCT_OUT)/apex/$(TARGET_ART_APEX)/apex_manifest.pb
endif
art_apex_symlink_timestamp := $(call intermediates-dir-for,FAKE,com.android.art)/symlink.timestamp
$(art_apex_manifest_file): $(art_apex_symlink_timestamp)
$(art_apex_manifest_file): PRIVATE_LINK_NAME := $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art
$(art_apex_symlink_timestamp):
$(hide) mkdir -p $(dir $(PRIVATE_LINK_NAME))
$(hide) ln -sf $(TARGET_ART_APEX) $(PRIVATE_LINK_NAME)
$(hide) touch $@
art_apex_manifest_file :=
#######################
# Fake packages for ART
# The art-runtime package depends on the core ART libraries and binaries. It exists so we can
# manipulate the set of things shipped, e.g., add debug versions and so on.
include $(CLEAR_VARS)
LOCAL_MODULE := art-runtime
# Base requirements.
LOCAL_REQUIRED_MODULES := \
dalvikvm.com.android.art.release \
dex2oat.com.android.art.release \
dexoptanalyzer.com.android.art.release \
libart.com.android.art.release \
libart-compiler.com.android.art.release \
libopenjdkjvm.com.android.art.release \
libopenjdkjvmti.com.android.art.release \
profman.com.android.art.release \
libadbconnection.com.android.art.release \
libperfetto_hprof.com.android.art.release \
# Potentially add in debug variants:
#
# * We will never add them if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD = false.
# * We will always add them if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD = true.
# * Otherwise, we will add them by default to userdebug and eng builds.
art_target_include_debug_build := $(PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD)
ifneq (false,$(art_target_include_debug_build))
ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
art_target_include_debug_build := true
endif
ifeq (true,$(art_target_include_debug_build))
LOCAL_REQUIRED_MODULES += \
dex2oatd.com.android.art.debug \
dexoptanalyzerd.com.android.art.debug \
libartd.com.android.art.debug \
libartd-compiler.com.android.art.debug \
libopenjdkd.com.android.art.debug \
libopenjdkjvmd.com.android.art.debug \
libopenjdkjvmtid.com.android.art.debug \
profmand.com.android.art.debug \
libadbconnectiond.com.android.art.debug \
libperfetto_hprofd.com.android.art.debug \
endif
endif
include $(BUILD_PHONY_PACKAGE)
# The art-tools package depends on helpers and tools that are useful for developers. Similar
# dependencies exist for the APEX builds for these tools (see build/apex/Android.bp).
include $(CLEAR_VARS)
LOCAL_MODULE := art-tools
LOCAL_IS_HOST_MODULE := true
LOCAL_REQUIRED_MODULES := \
ahat \
dexdump \
hprof-conv \
# A subset of the tools are disabled when HOST_PREFER_32_BIT is defined as make reports that
# they are not supported on host (b/129323791). This is likely due to art_apex disabling host
# APEX builds when HOST_PREFER_32_BIT is set (b/120617876).
ifneq ($(HOST_PREFER_32_BIT),true)
LOCAL_REQUIRED_MODULES += \
dexdiag \
dexlist \
oatdump \
endif
include $(BUILD_PHONY_PACKAGE)
####################################################################################################
# Fake packages to ensure generation of libopenjdkd when one builds with mm/mmm/mmma.
#
# The library is required for starting a runtime in debug mode, but libartd does not depend on it
# (dependency cycle otherwise).
#
# Note: * As the package is phony to create a dependency the package name is irrelevant.
# * We make MULTILIB explicit to "both," just to state here that we want both libraries on
# 64-bit systems, even if it is the default.
# ART on the host.
ifeq ($(ART_BUILD_HOST_DEBUG),true)
include $(CLEAR_VARS)
LOCAL_MODULE := art-libartd-libopenjdkd-host-dependency
LOCAL_MULTILIB := both
LOCAL_REQUIRED_MODULES := libopenjdkd
LOCAL_IS_HOST_MODULE := true
include $(BUILD_PHONY_PACKAGE)
endif
# ART on the target.
ifeq ($(ART_BUILD_TARGET_DEBUG),true)
include $(CLEAR_VARS)
LOCAL_MODULE := art-libartd-libopenjdkd-target-dependency
LOCAL_MULTILIB := both
LOCAL_REQUIRED_MODULES := libopenjdkd
include $(BUILD_PHONY_PACKAGE)
endif
########################################################################
# "m build-art" for quick minimal build
.PHONY: build-art
build-art: build-art-host build-art-target
.PHONY: build-art-host
build-art-host: $(HOST_OUT_EXECUTABLES)/art $(ART_HOST_DEPENDENCIES) $(HOST_CORE_IMG_OUTS)
.PHONY: build-art-target
build-art-target: $(TARGET_OUT_EXECUTABLES)/art $(ART_TARGET_DEPENDENCIES) $(TARGET_CORE_IMG_OUTS)
########################################################################
# Workaround for not using symbolic links for linker and bionic libraries
# in a minimal setup (eg buildbot or golem).
########################################################################
PRIVATE_BIONIC_FILES := \
bin/bootstrap/linker \
bin/bootstrap/linker64 \
lib/bootstrap/libc.so \
lib/bootstrap/libm.so \
lib/bootstrap/libdl.so \
lib/bootstrap/libdl_android.so \
lib64/bootstrap/libc.so \
lib64/bootstrap/libm.so \
lib64/bootstrap/libdl.so \
lib64/bootstrap/libdl_android.so \
PRIVATE_ART_APEX_DEPENDENCY_FILES := \
bin/dalvikvm32 \
bin/dalvikvm64 \
bin/dalvikvm \
bin/dex2oat32 \
bin/dex2oat64 \
bin/dexdump \
PRIVATE_ART_APEX_DEPENDENCY_LIBS := \
lib/libadbconnection.so \
lib/libandroidicu.so \
lib/libandroidio.so \
lib/libartbase.so \
lib/libart-compiler.so \
lib/libart-dexlayout.so \
lib/libart-disassembler.so \
lib/libartpalette.so \
lib/libart.so \
lib/libbacktrace.so \
lib/libbase.so \
lib/libcrypto.so \
lib/libdexfile_external.so \
lib/libdexfile.so \
lib/libdexfile_support.so \
lib/libdt_fd_forward.so \
lib/libdt_socket.so \
lib/libexpat.so \
lib/libicui18n.so \
lib/libicu_jni.so \
lib/libicuuc.so \
lib/libjavacore.so \
lib/libjdwp.so \
lib/liblzma.so \
lib/libmeminfo.so \
lib/libnativebridge.so \
lib/libnativehelper.so \
lib/libnativeloader.so \
lib/libnpt.so \
lib/libopenjdkjvm.so \
lib/libopenjdkjvmti.so \
lib/libopenjdk.so \
lib/libpac.so \
lib/libprocinfo.so \
lib/libprofile.so \
lib/libsigchain.so \
lib/libunwindstack.so \
lib/libvixl.so \
lib/libziparchive.so \
lib/libz.so \
lib64/libadbconnection.so \
lib64/libandroidicu.so \
lib64/libandroidio.so \
lib64/libartbase.so \
lib64/libart-compiler.so \
lib64/libart-dexlayout.so \
lib64/libart-disassembler.so \
lib64/libartpalette.so \
lib64/libart.so \
lib64/libbacktrace.so \
lib64/libbase.so \
lib64/libcrypto.so \
lib64/libdexfile_external.so \
lib64/libdexfile.so \
lib64/libdexfile_support.so \
lib64/libdt_fd_forward.so \
lib64/libdt_socket.so \
lib64/libexpat.so \
lib64/libicui18n.so \
lib64/libicu_jni.so \
lib64/libicuuc.so \
lib64/libjavacore.so \
lib64/libjdwp.so \
lib64/liblzma.so \
lib64/libmeminfo.so \
lib64/libnativebridge.so \
lib64/libnativehelper.so \
lib64/libnativeloader.so \
lib64/libnpt.so \
lib64/libopenjdkjvm.so \
lib64/libopenjdkjvmti.so \
lib64/libopenjdk.so \
lib64/libpac.so \
lib64/libprocinfo.so \
lib64/libprofile.so \
lib64/libsigchain.so \
lib64/libunwindstack.so \
lib64/libvixl.so \
lib64/libziparchive.so \
lib64/libz.so \
PRIVATE_CONSCRYPT_APEX_DEPENDENCY_LIBS := \
lib/libcrypto.so \
lib/libjavacrypto.so \
lib/libssl.so \
lib64/libcrypto.so \
lib64/libjavacrypto.so \
lib64/libssl.so \
# Generate copies of Bionic bootstrap artifacts and ART APEX
# libraries in the `system` (TARGET_OUT) directory. This is dangerous
# as these files could inadvertently stay in this directory and be
# included in a system image.
#
# Copy some libraries into `$(TARGET_OUT)/lib(64)` (the
# `/system/lib(64)` directory to be sync'd to the target) for ART testing
# purposes:
# - Bionic bootstrap libraries, copied from
# `$(TARGET_OUT)/lib(64)/bootstrap` (the `/system/lib(64)/bootstrap`
# directory to be sync'd to the target);
# - Programs and libraries from the ART APEX; if the product
# to build uses flattened APEXes, these libraries are copied from
# `$(TARGET_OUT)/apex/com.android.art.debug` (the flattened
# (Debug) ART APEX directory to be sync'd to the target);
# otherwise, they are copied from
# `$(TARGET_OUT)/../apex/com.android.art.debug` (the local
# directory under the build tree containing the (Debug) ART APEX
# artifacts, which is not sync'd to the target).
# - Libraries from the Conscrypt APEX may be loaded during golem runs.
#
# This target is only used by Golem now.
#
# NB Android build does not use cp from:
# $ANDROID_BUILD_TOP/prebuilts/build-tools/path/{linux-x86,darwin-x86}
# which has a non-standard set of command-line flags.
#
# TODO(b/129332183): Remove this when Golem has full support for the
# ART APEX.
.PHONY: standalone-apex-files
standalone-apex-files: deapexer \
libc.bootstrap \
libdl.bootstrap \
libdl_android.bootstrap \
libm.bootstrap \
linker \
$(RELEASE_ART_APEX) \
$(CONSCRYPT_APEX)
for f in $(PRIVATE_BIONIC_FILES); do \
tf=$(TARGET_OUT)/$$f; \
if [ -f $$tf ]; then cp -f $$tf $$(echo $$tf | sed 's,bootstrap/,,'); fi; \
done
if [ "x$(TARGET_FLATTEN_APEX)" = xtrue ]; then \
apex_orig_dir=$(TARGET_OUT)/apex; \
else \
apex_orig_dir=""; \
fi; \
art_apex_orig_dir=$$apex_orig_dir/$(RELEASE_ART_APEX); \
for f in $(PRIVATE_ART_APEX_DEPENDENCY_LIBS) $(PRIVATE_ART_APEX_DEPENDENCY_FILES); do \
tf="$$art_apex_orig_dir/$$f"; \
df="$(TARGET_OUT)/$$f"; \
if [ -f $$tf ]; then \
if [ -h $$df ]; then rm $$df; fi; \
cp -fd $$tf $$df; \
fi; \
done; \
conscrypt_dir="$$apex_orig_dir/$(CONSCRYPT_APEX)"; \
conscrypt_apex="$$apex_orig_dir/$(CONSCRYPT_APEX).apex"; \
if [ -f $$conscrypt_apex ]; then \
rm -rf $$conscrypt_dir; \
mkdir $$conscrypt_dir; \
debugfs=$(HOST_OUT)/bin/debugfs_static; \
$(HOST_OUT)/bin/deapexer --debugfs_path $$debugfs extract $$conscrypt_apex $$conscrypt_dir; \
fi; \
conscrypt_apex_orig_dir=$$apex_orig_dir/$(CONSCRYPT_APEX); \
for f in $(PRIVATE_CONSCRYPT_APEX_DEPENDENCY_LIBS); do \
tf="$$conscrypt_apex_orig_dir/$$f"; \
if [ -f $$tf ]; then cp -f $$tf $(TARGET_OUT)/$$f; fi; \
done; \
########################################################################
# Phony target for only building what go/lem requires for pushing ART on /data.
.PHONY: build-art-target-golem
# Also include libartbenchmark, we always include it when running golem.
# libstdc++ is needed when building for ART_TARGET_LINUX.
# Also include the bootstrap Bionic libraries (libc, libdl, libdl_android,
# libm). These are required as the "main" libc, libdl, libdl_android, and libm
# have moved to the ART APEX. This is a temporary change needed until Golem
# fully supports the ART APEX.
#
# TODO(b/129332183): Remove this when Golem has full support for the
# ART APEX.
# Also include:
# - a copy of the ICU prebuilt .dat file in /system/etc/icu on target
# (see module `icu-data-art-test-i18n`); and
# so that it can be found even if the ART APEX is not available, by setting the
# environment variable `ART_TEST_ANDROID_ART_ROOT` to "/system" on device. This
# is a temporary change needed until Golem fully supports the ART APEX.
#
# TODO(b/129332183): Remove this when Golem has full support for the
# ART APEX.
# Also include:
# - a copy of the time zone data prebuilt files in
# /system/etc/tzdata_module/etc/tz and /system/etc/tzdata_module/etc/icu
# on target, (see modules `tzdata-art-test-tzdata`,
# `tzlookup.xml-art-test-tzdata`, and `tz_version-art-test-tzdata`, and
# `icu_overlay-art-test-tzdata`)
# so that they can be found even if the Time Zone Data APEX is not available,
# by setting the environment variable `ART_TEST_ANDROID_TZDATA_ROOT`
# to "/system/etc/tzdata_module" on device. This is a temporary change needed
# until Golem fully supports the Time Zone Data APEX.
#
# TODO(b/129332183): Remove this when Golem has full support for the
# ART APEX (and TZ Data APEX).
ART_TARGET_SHARED_LIBRARY_BENCHMARK := $(TARGET_OUT_SHARED_LIBRARIES)/libartbenchmark.so
build-art-target-golem: $(RELEASE_ART_APEX) com.android.runtime $(CONSCRYPT_APEX) \
$(TARGET_OUT_EXECUTABLES)/art \
$(TARGET_OUT)/etc/public.libraries.txt \
$(ART_TARGET_SHARED_LIBRARY_BENCHMARK) \
$(TARGET_CORE_IMG_OUT_BASE).art \
$(TARGET_CORE_IMG_OUT_BASE)-interpreter.art \
libartpalette-system \
libc.bootstrap libdl.bootstrap libdl_android.bootstrap libm.bootstrap \
icu-data-art-test-i18n \
tzdata-art-test-tzdata tzlookup.xml-art-test-tzdata \
tz_version-art-test-tzdata icu_overlay-art-test-tzdata \
standalone-apex-files
# remove debug libraries from public.libraries.txt because golem builds
# won't have it.
sed -i '/libartd.so/d' $(TARGET_OUT)/etc/public.libraries.txt
sed -i '/libdexfiled.so/d' $(TARGET_OUT)/etc/public.libraries.txt
sed -i '/libprofiled.so/d' $(TARGET_OUT)/etc/public.libraries.txt
sed -i '/libartbased.so/d' $(TARGET_OUT)/etc/public.libraries.txt
# The 'art' script will look for a 'com.android.art' directory.
ln -sf com.android.art.release $(TARGET_OUT)/apex/com.android.art
########################################################################
# Phony target for building what go/lem requires on host.
.PHONY: build-art-host-golem
# Also include libartbenchmark, we always include it when running golem.
ART_HOST_SHARED_LIBRARY_BENCHMARK := $(ART_HOST_OUT_SHARED_LIBRARIES)/libartbenchmark.so
build-art-host-golem: build-art-host \
$(ART_HOST_SHARED_LIBRARY_BENCHMARK)
########################################################################
# Phony target for building what go/lem requires for syncing /system to target.
.PHONY: build-art-unbundled-golem
art_apex_jars := $(foreach pair,$(ART_APEX_JARS), $(call word-colon,2,$(pair)))
build-art-unbundled-golem: art-runtime linker oatdump $(art_apex_jars) conscrypt crash_dump
########################################################################
# Rules for building all dependencies for tests.
.PHONY: build-art-host-tests
build-art-host-tests: build-art-host $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES)
.PHONY: build-art-target-tests
build-art-target-tests: build-art-target $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_TARGET_RUN_TEST_DEPENDENCIES) $(ART_TEST_TARGET_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES)
########################################################################
# targets to switch back and forth from libdvm to libart
.PHONY: use-art
use-art:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell start
.PHONY: use-artd
use-artd:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so
$(ADB) shell start
.PHONY: use-dalvik
use-dalvik:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libdvm.so
$(ADB) shell start
.PHONY: use-art-full
use-art-full:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter \"\"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter \"\"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-artd-full
use-artd-full:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter \"\"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter \"\"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-art-jit
use-art-jit:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "verify-at-runtime"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "verify-at-runtime"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit true
$(ADB) shell start
.PHONY: use-art-interpret-only
use-art-interpret-only:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "interpret-only"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "interpret-only"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-artd-interpret-only
use-artd-interpret-only:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "interpret-only"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "interpret-only"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-art-verify-none
use-art-verify-none:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "verify-none"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "verify-none"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
########################################################################
# Clear locally used variables.
TEST_ART_TARGET_SYNC_DEPS :=
# Helper target that depends on boot image creation.
#
# Can be used, for example, to dump initialization failures:
# m art-boot-image ART_BOOT_IMAGE_EXTRA_ARGS=--dump-init-failures=fails.txt
.PHONY: art-boot-image
art-boot-image: $(DEXPREOPT_IMAGE_boot_$(TARGET_ARCH))
.PHONY: art-job-images
art-job-images: \
art-boot-image \
$(2ND_DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME) \
$(HOST_OUT_EXECUTABLES)/dex2oats \
$(HOST_OUT_EXECUTABLES)/dex2oatds \
$(HOST_OUT_EXECUTABLES)/profman