blob: df631bc20205b1ea5c1237510cd9e6b768f008ab [file] [log] [blame]
# Copyright (C) 2015 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
.class public LTestCmp;
.super Ljava/lang/Object;
## CHECK-START: int TestCmp.$opt$CmpLongConstants() constant_folding (before)
## CHECK-DAG: <<Const13:j\d+>> LongConstant 13
## CHECK-DAG: <<Const7:j\d+>> LongConstant 7
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const13>>,<<Const7>>]
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLongConstants() constant_folding (after)
## CHECK-DAG: LongConstant 13
## CHECK-DAG: LongConstant 7
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: Return [<<Const1>>]
## CHECK-START: int TestCmp.$opt$CmpLongConstants() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLongConstants()I
.registers 5
const-wide v1, 13
const-wide v3, 7
cmp-long v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpGtFloatConstants() constant_folding (before)
## CHECK-DAG: <<Const11:f\d+>> FloatConstant 11
## CHECK-DAG: <<Const22:f\d+>> FloatConstant 22
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const11>>,<<Const22>>] bias:gt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpGtFloatConstants() constant_folding (after)
## CHECK-DAG: FloatConstant 11
## CHECK-DAG: FloatConstant 22
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: Return [<<ConstM1>>]
## CHECK-START: int TestCmp.$opt$CmpGtFloatConstants() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpGtFloatConstants()I
.registers 3
const v1, 11.f
const v2, 22.f
cmpg-float v0, v1, v2
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLtFloatConstants() constant_folding (before)
## CHECK-DAG: <<Const33:f\d+>> FloatConstant 33
## CHECK-DAG: <<Const44:f\d+>> FloatConstant 44
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const33>>,<<Const44>>] bias:lt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLtFloatConstants() constant_folding (after)
## CHECK-DAG: FloatConstant 33
## CHECK-DAG: FloatConstant 44
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: Return [<<ConstM1>>]
## CHECK-START: int TestCmp.$opt$CmpLtFloatConstants() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLtFloatConstants()I
.registers 3
const v1, 33.f
const v2, 44.f
cmpl-float v0, v1, v2
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpGtDoubleConstants() constant_folding (before)
## CHECK-DAG: <<Const55:d\d+>> DoubleConstant 55
## CHECK-DAG: <<Const66:d\d+>> DoubleConstant 66
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const55>>,<<Const66>>] bias:gt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpGtDoubleConstants() constant_folding (after)
## CHECK-DAG: DoubleConstant 55
## CHECK-DAG: DoubleConstant 66
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: Return [<<ConstM1>>]
## CHECK-START: int TestCmp.$opt$CmpGtDoubleConstants() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpGtDoubleConstants()I
.registers 5
const-wide v1, 55.
const-wide v3, 66.
cmpg-double v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLtDoubleConstants() constant_folding (before)
## CHECK-DAG: <<Const77:d\d+>> DoubleConstant 77
## CHECK-DAG: <<Const88:d\d+>> DoubleConstant 88
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const77>>,<<Const88>>] bias:lt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLtDoubleConstants() constant_folding (after)
## CHECK-DAG: DoubleConstant 77
## CHECK-DAG: DoubleConstant 88
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: Return [<<ConstM1>>]
## CHECK-START: int TestCmp.$opt$CmpLtDoubleConstants() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLtDoubleConstants()I
.registers 5
const-wide v1, 77.
const-wide v3, 88.
cmpl-double v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLongSameConstant() constant_folding (before)
## CHECK-DAG: <<Const100:j\d+>> LongConstant 100
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const100>>,<<Const100>>]
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLongSameConstant() constant_folding (after)
## CHECK-DAG: LongConstant 100
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: Return [<<Const0>>]
## CHECK-START: int TestCmp.$opt$CmpLongSameConstant() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLongSameConstant()I
.registers 5
const-wide v1, 100
const-wide v3, 100
cmp-long v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpGtFloatSameConstant() constant_folding (before)
## CHECK-DAG: <<Const200:f\d+>> FloatConstant 200
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const200>>,<<Const200>>] bias:gt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpGtFloatSameConstant() constant_folding (after)
## CHECK-DAG: FloatConstant 200
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: Return [<<Const0>>]
## CHECK-START: int TestCmp.$opt$CmpGtFloatSameConstant() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpGtFloatSameConstant()I
.registers 3
const v1, 200.f
const v2, 200.f
cmpg-float v0, v1, v2
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLtFloatSameConstant() constant_folding (before)
## CHECK-DAG: <<Const300:f\d+>> FloatConstant 300
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const300>>,<<Const300>>] bias:lt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLtFloatSameConstant() constant_folding (after)
## CHECK-DAG: FloatConstant 300
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: Return [<<Const0>>]
## CHECK-START: int TestCmp.$opt$CmpLtFloatSameConstant() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLtFloatSameConstant()I
.registers 3
const v1, 300.f
const v2, 300.f
cmpl-float v0, v1, v2
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpGtDoubleSameConstant() constant_folding (before)
## CHECK-DAG: <<Const400:d\d+>> DoubleConstant 400
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const400>>,<<Const400>>] bias:gt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpGtDoubleSameConstant() constant_folding (after)
## CHECK-DAG: DoubleConstant 400
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: Return [<<Const0>>]
## CHECK-START: int TestCmp.$opt$CmpGtDoubleSameConstant() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpGtDoubleSameConstant()I
.registers 5
const-wide v1, 400.
const-wide v3, 400.
cmpg-double v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLtDoubleSameConstant() constant_folding (before)
## CHECK-DAG: <<Const500:d\d+>> DoubleConstant 500
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const500>>,<<Const500>>] bias:lt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLtDoubleSameConstant() constant_folding (after)
## CHECK-DAG: DoubleConstant 500
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: Return [<<Const0>>]
## CHECK-START: int TestCmp.$opt$CmpLtDoubleSameConstant() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLtDoubleSameConstant()I
.registers 5
const-wide v1, 500.
const-wide v3, 500.
cmpl-double v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpGtFloatConstantWithNaN() constant_folding (before)
## CHECK-DAG: <<Const44:f\d+>> FloatConstant 44
## CHECK-DAG: <<ConstNan:f\d+>> FloatConstant nan
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const44>>,<<ConstNan>>] bias:gt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpGtFloatConstantWithNaN() constant_folding (after)
## CHECK-DAG: FloatConstant 44
## CHECK-DAG: FloatConstant nan
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: Return [<<Const1>>]
## CHECK-START: int TestCmp.$opt$CmpGtFloatConstantWithNaN() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpGtFloatConstantWithNaN()I
.registers 3
const v1, 44.f
const v2, NaNf
cmpg-float v0, v1, v2
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLtFloatConstantWithNaN() constant_folding (before)
## CHECK-DAG: <<Const44:f\d+>> FloatConstant 44
## CHECK-DAG: <<ConstNan:f\d+>> FloatConstant nan
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const44>>,<<ConstNan>>] bias:lt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLtFloatConstantWithNaN() constant_folding (after)
## CHECK-DAG: FloatConstant 44
## CHECK-DAG: FloatConstant nan
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: Return [<<ConstM1>>]
## CHECK-START: int TestCmp.$opt$CmpLtFloatConstantWithNaN() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLtFloatConstantWithNaN()I
.registers 3
const v1, 44.f
const v2, NaNf
cmpl-float v0, v1, v2
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpGtDoubleConstantWithNaN() constant_folding (before)
## CHECK-DAG: <<Const45:d\d+>> DoubleConstant 45
## CHECK-DAG: <<ConstNan:d\d+>> DoubleConstant nan
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const45>>,<<ConstNan>>] bias:gt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpGtDoubleConstantWithNaN() constant_folding (after)
## CHECK-DAG: DoubleConstant 45
## CHECK-DAG: DoubleConstant nan
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: Return [<<Const1>>]
## CHECK-START: int TestCmp.$opt$CmpGtDoubleConstantWithNaN() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpGtDoubleConstantWithNaN()I
.registers 5
const-wide v1, 45.
const-wide v3, NaN
cmpg-double v0, v1, v3
return v0
.end method
## CHECK-START: int TestCmp.$opt$CmpLtDoubleConstantWithNaN() constant_folding (before)
## CHECK-DAG: <<Const46:d\d+>> DoubleConstant 46
## CHECK-DAG: <<ConstNan:d\d+>> DoubleConstant nan
## CHECK-DAG: <<Cmp:i\d+>> Compare [<<Const46>>,<<ConstNan>>] bias:lt
## CHECK-DAG: Return [<<Cmp>>]
## CHECK-START: int TestCmp.$opt$CmpLtDoubleConstantWithNaN() constant_folding (after)
## CHECK-DAG: DoubleConstant 46
## CHECK-DAG: DoubleConstant nan
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: Return [<<ConstM1>>]
## CHECK-START: int TestCmp.$opt$CmpLtDoubleConstantWithNaN() constant_folding (after)
## CHECK-NOT: Compare
.method public static $opt$CmpLtDoubleConstantWithNaN()I
.registers 5
const-wide v1, 46.
const-wide v3, NaN
cmpl-double v0, v1, v3
return v0
.end method