blob: 0cfbbff3aa42102912d5ddc844ee0f5b6fcd3eff [file] [log] [blame]
%def header():
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
Art assembly interpreter notes:
First validate assembly code by implementing ExecuteXXXImpl() style body (doesn't
handle invoke, allows higher-level code to create frame & shadow frame.
Once that's working, support direct entry code & eliminate shadow frame (and
excess locals allocation.
Some (hopefully) temporary ugliness. We'll treat xFP as pointing to the
base of the vreg array within the shadow frame. Access the other fields,
dex_pc_, method_ and number_of_vregs_ via negative offsets. For now, we'll continue
the shadow frame mechanism of double-storing object references - via xFP &
number_of_vregs_.
*/
/*
ARM64 Runtime register usage conventions.
r0 : w0 is 32-bit return register and x0 is 64-bit.
r0-r7 : Argument registers.
r8-r15 : Caller save registers (used as temporary registers).
r16-r17: Also known as ip0-ip1, respectively. Used as scratch registers by
the linker, by the trampolines and other stubs (the backend uses
these as temporary registers).
r18 : Caller save register (used as temporary register).
r19 : Pointer to thread-local storage.
r20-r29: Callee save registers.
r30 : (lr) is reserved (the link register).
rsp : (sp) is reserved (the stack pointer).
rzr : (zr) is reserved (the zero register).
Floating-point registers
v0-v31
v0 : s0 is return register for singles (32-bit) and d0 for doubles (64-bit).
This is analogous to the C/C++ (hard-float) calling convention.
v0-v7 : Floating-point argument registers in both Dalvik and C/C++ conventions.
Also used as temporary and codegen scratch registers.
v0-v7 and v16-v31 : trashed across C calls.
v8-v15 : bottom 64-bits preserved across C calls (d8-d15 are preserved).
v16-v31: Used as codegen temp/scratch.
v8-v15 : Can be used for promotion.
Must maintain 16-byte stack alignment.
Mterp notes:
The following registers have fixed assignments:
reg nick purpose
x20 xPC interpreted program counter, used for fetching instructions
x21 xFP interpreted frame pointer, used for accessing locals and args
x22 xSELF self (Thread) pointer
x23 xINST first 16-bit code unit of current instruction
x24 xIBASE interpreted instruction base pointer, used for computed goto
x25 xREFS base of object references in shadow frame (ideally, we'll get rid of this later).
x26 wPROFILE jit profile hotness countdown
x16 ip scratch reg
x17 ip2 scratch reg (used by macros)
Macros are provided for common operations. They MUST NOT alter unspecified registers or condition
codes.
*/
/*
* This is a #include, not a %include, because we want the C pre-processor
* to expand the macros into assembler assignment statements.
*/
#include "asm_support.h"
#include "interpreter/cfi_asm_support.h"
#define MTERP_PROFILE_BRANCHES 1
#define MTERP_LOGGING 0
/* During bringup, we'll use the shadow frame model instead of xFP */
/* single-purpose registers, given names for clarity */
#define xPC x20
#define CFI_DEX 20 // DWARF register number of the register holding dex-pc (xPC).
#define CFI_TMP 0 // DWARF register number of the first argument register (r0).
#define xFP x21
#define xSELF x22
#define xINST x23
#define wINST w23
#define xIBASE x24
#define xREFS x25
#define wPROFILE w26
#define xPROFILE x26
#define ip x16
#define ip2 x17
/*
* Instead of holding a pointer to the shadow frame, we keep xFP at the base of the vregs. So,
* to access other shadow frame fields, we need to use a backwards offset. Define those here.
*/
#define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET)
#define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET)
#define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET)
#define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET)
#define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET)
#define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET)
#define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET)
#define OFF_FP_DEX_INSTRUCTIONS OFF_FP(SHADOWFRAME_DEX_INSTRUCTIONS_OFFSET)
#define OFF_FP_SHADOWFRAME OFF_FP(0)
/*
* "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must
* be done *before* something throws.
*
* It's okay to do this more than once.
*
* NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped
* dex byte codes. However, the rest of the runtime expects dex pc to be an instruction
* offset into the code_items_[] array. For effiency, we will "export" the
* current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC
* to convert to a dex pc when needed.
*/
.macro EXPORT_PC
str xPC, [xFP, #OFF_FP_DEX_PC_PTR]
.endm
/*
* Fetch the next instruction from xPC into wINST. Does not advance xPC.
*/
.macro FETCH_INST
ldrh wINST, [xPC]
.endm
/*
* Fetch the next instruction from the specified offset. Advances xPC
* to point to the next instruction. "_count" is in 16-bit code units.
*
* Because of the limited size of immediate constants on ARM, this is only
* suitable for small forward movements (i.e. don't try to implement "goto"
* with this).
*
* This must come AFTER anything that can throw an exception, or the
* exception catch may miss. (This also implies that it must come after
* EXPORT_PC.)
*/
.macro FETCH_ADVANCE_INST count
ldrh wINST, [xPC, #((\count)*2)]!
.endm
/*
* The operation performed here is similar to FETCH_ADVANCE_INST, except the
* src and dest registers are parameterized (not hard-wired to xPC and xINST).
*/
.macro PREFETCH_ADVANCE_INST dreg, sreg, count
ldrh \dreg, [\sreg, #((\count)*2)]!
.endm
/*
* Similar to FETCH_ADVANCE_INST, but does not update xPC. Used to load
* xINST ahead of possible exception point. Be sure to manually advance xPC
* later.
*/
.macro PREFETCH_INST count
ldrh wINST, [xPC, #((\count)*2)]
.endm
/* Advance xPC by some number of code units. */
.macro ADVANCE count
add xPC, xPC, #((\count)*2)
.endm
/*
* Fetch the next instruction from an offset specified by _reg and advance xPC.
* xPC to point to the next instruction. "_reg" must specify the distance
* in bytes, *not* 16-bit code units, and may be a signed value. Must not set flags.
*
*/
.macro FETCH_ADVANCE_INST_RB reg
add xPC, xPC, \reg, sxtw
ldrh wINST, [xPC]
.endm
/*
* Fetch a half-word code unit from an offset past the current PC. The
* "_count" value is in 16-bit code units. Does not advance xPC.
*
* The "_S" variant works the same but treats the value as signed.
*/
.macro FETCH reg, count
ldrh \reg, [xPC, #((\count)*2)]
.endm
.macro FETCH_S reg, count
ldrsh \reg, [xPC, #((\count)*2)]
.endm
/*
* Fetch one byte from an offset past the current PC. Pass in the same
* "_count" as you would for FETCH, and an additional 0/1 indicating which
* byte of the halfword you want (lo/hi).
*/
.macro FETCH_B reg, count, byte
ldrb \reg, [xPC, #((\count)*2+(\byte))]
.endm
/*
* Put the instruction's opcode field into the specified register.
*/
.macro GET_INST_OPCODE reg
and \reg, xINST, #255
.endm
/*
* Put the prefetched instruction's opcode field into the specified register.
*/
.macro GET_PREFETCHED_OPCODE oreg, ireg
and \oreg, \ireg, #255
.endm
/*
* Begin executing the opcode in _reg. Clobbers reg
*/
.macro GOTO_OPCODE reg
add \reg, xIBASE, \reg, lsl #${handler_size_bits}
br \reg
.endm
.macro GOTO_OPCODE_BASE base,reg
add \reg, \base, \reg, lsl #${handler_size_bits}
br \reg
.endm
/*
* Get/set the 32-bit value from a Dalvik register.
*/
.macro GET_VREG reg, vreg
ldr \reg, [xFP, \vreg, uxtw #2]
.endm
.macro SET_VREG reg, vreg
str \reg, [xFP, \vreg, uxtw #2]
str wzr, [xREFS, \vreg, uxtw #2]
.endm
.macro SET_VREG_OBJECT reg, vreg, tmpreg
str \reg, [xFP, \vreg, uxtw #2]
str \reg, [xREFS, \vreg, uxtw #2]
.endm
.macro SET_VREG_FLOAT reg, vreg
str \reg, [xFP, \vreg, uxtw #2]
str wzr, [xREFS, \vreg, uxtw #2]
.endm
/*
* Get/set the 64-bit value from a Dalvik register.
*/
.macro GET_VREG_WIDE reg, vreg
add ip2, xFP, \vreg, lsl #2
ldr \reg, [ip2]
.endm
.macro SET_VREG_WIDE reg, vreg
add ip2, xFP, \vreg, lsl #2
str \reg, [ip2]
add ip2, xREFS, \vreg, lsl #2
str xzr, [ip2]
.endm
.macro GET_VREG_DOUBLE reg, vreg
add ip2, xFP, \vreg, lsl #2
ldr \reg, [ip2]
.endm
.macro SET_VREG_DOUBLE reg, vreg
add ip2, xFP, \vreg, lsl #2
str \reg, [ip2]
add ip2, xREFS, \vreg, lsl #2
str xzr, [ip2]
.endm
/*
* Get the 32-bit value from a Dalvik register and sign-extend to 64-bit.
* Used to avoid an extra instruction in int-to-long.
*/
.macro GET_VREG_S reg, vreg
ldrsw \reg, [xFP, \vreg, uxtw #2]
.endm
/*
* Convert a virtual register index into an address.
*/
.macro VREG_INDEX_TO_ADDR reg, vreg
add \reg, xFP, \vreg, lsl #2 /* WARNING: handle shadow frame vreg zero if store */
.endm
/*
* Refresh handler table.
*/
.macro REFRESH_IBASE
ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET]
.endm
/*
* Save two registers to the stack.
*/
.macro SAVE_TWO_REGS reg1, reg2, offset
stp \reg1, \reg2, [sp, #(\offset)]
.cfi_rel_offset \reg1, (\offset)
.cfi_rel_offset \reg2, (\offset) + 8
.endm
/*
* Restore two registers from the stack.
*/
.macro RESTORE_TWO_REGS reg1, reg2, offset
ldp \reg1, \reg2, [sp, #(\offset)]
.cfi_restore \reg1
.cfi_restore \reg2
.endm
/*
* Increase frame size and save two registers to the bottom of the stack.
*/
.macro SAVE_TWO_REGS_INCREASE_FRAME reg1, reg2, frame_adjustment
stp \reg1, \reg2, [sp, #-(\frame_adjustment)]!
.cfi_adjust_cfa_offset (\frame_adjustment)
.cfi_rel_offset \reg1, 0
.cfi_rel_offset \reg2, 8
.endm
/*
* Restore two registers from the bottom of the stack and decrease frame size.
*/
.macro RESTORE_TWO_REGS_DECREASE_FRAME reg1, reg2, frame_adjustment
ldp \reg1, \reg2, [sp], #(\frame_adjustment)
.cfi_restore \reg1
.cfi_restore \reg2
.cfi_adjust_cfa_offset -(\frame_adjustment)
.endm
/*
* function support macros.
*/
.macro ENTRY name
.type \name, #function
.hidden \name // Hide this as a global symbol, so we do not incur plt calls.
.global \name
/* Cache alignment for function entry */
.balign 16
\name:
.endm
.macro END name
.size \name, .-\name
.endm
// Macro to unpoison (negate) the reference for heap poisoning.
.macro UNPOISON_HEAP_REF rRef
#ifdef USE_HEAP_POISONING
neg \rRef, \rRef
#endif // USE_HEAP_POISONING
.endm
%def entry():
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
.text
/*
* Interpreter entry point.
* On entry:
* x0 Thread* self/
* x1 insns_
* x2 ShadowFrame
* x3 JValue* result_register
*
*/
ENTRY ExecuteMterpImpl
.cfi_startproc
SAVE_TWO_REGS_INCREASE_FRAME xPROFILE, x27, 80
SAVE_TWO_REGS xIBASE, xREFS, 16
SAVE_TWO_REGS xSELF, xINST, 32
SAVE_TWO_REGS xPC, xFP, 48
SAVE_TWO_REGS fp, lr, 64
add fp, sp, #64
/* Remember the return register */
str x3, [x2, #SHADOWFRAME_RESULT_REGISTER_OFFSET]
/* Remember the dex instruction pointer */
str x1, [x2, #SHADOWFRAME_DEX_INSTRUCTIONS_OFFSET]
/* set up "named" registers */
mov xSELF, x0
ldr w0, [x2, #SHADOWFRAME_NUMBER_OF_VREGS_OFFSET]
add xFP, x2, #SHADOWFRAME_VREGS_OFFSET // point to vregs.
add xREFS, xFP, w0, lsl #2 // point to reference array in shadow frame
ldr w0, [x2, #SHADOWFRAME_DEX_PC_OFFSET] // Get starting dex_pc.
add xPC, x1, w0, lsl #1 // Create direct pointer to 1st dex opcode
CFI_DEFINE_DEX_PC_WITH_OFFSET(CFI_TMP, CFI_DEX, 0)
EXPORT_PC
/* Starting ibase */
ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET]
/* Set up for backwards branches & osr profiling */
ldr x0, [xFP, #OFF_FP_METHOD]
add x1, xFP, #OFF_FP_SHADOWFRAME
mov x2, xSELF
bl MterpSetUpHotnessCountdown
mov wPROFILE, w0 // Starting hotness countdown to xPROFILE
/* start executing the instruction at rPC */
FETCH_INST // load wINST from rPC
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
/* NOTE: no fallthrough */
// cfi info continues, and covers the whole mterp implementation.
END ExecuteMterpImpl
%def dchecks_before_helper():
// Call C++ to do debug checks and return to the handler using tail call.
.extern MterpCheckBefore
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
mov x2, xPC
b MterpCheckBefore // (self, shadow_frame, dex_pc_ptr) Note: tail call.
%def opcode_pre():
% add_helper(dchecks_before_helper, "Mterp_dchecks_before_helper")
#if !defined(NDEBUG)
bl Mterp_dchecks_before_helper
#endif
%def footer():
.cfi_endproc
END MterpHelpers
%def fallback():
/* Transfer stub to alternate interpreter */
b MterpFallback
%def helpers():
ENTRY MterpHelpers
/*
* ===========================================================================
* Common subroutines and data
* ===========================================================================
*/
/*
* We've detected a condition that will result in an exception, but the exception
* has not yet been thrown. Just bail out to the reference interpreter to deal with it.
* TUNING: for consistency, we may want to just go ahead and handle these here.
*/
common_errDivideByZero:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogDivideByZeroException
#endif
b MterpCommonFallback
common_errArrayIndex:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogArrayIndexException
#endif
b MterpCommonFallback
common_errNegativeArraySize:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogNegativeArraySizeException
#endif
b MterpCommonFallback
common_errNoSuchMethod:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogNoSuchMethodException
#endif
b MterpCommonFallback
common_errNullObject:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogNullObjectException
#endif
b MterpCommonFallback
common_exceptionThrown:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogExceptionThrownException
#endif
b MterpCommonFallback
MterpSuspendFallback:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
ldr x2, [xSELF, #THREAD_FLAGS_OFFSET]
bl MterpLogSuspendFallback
#endif
b MterpCommonFallback
/*
* If we're here, something is out of the ordinary. If there is a pending
* exception, handle it. Otherwise, roll back and retry with the reference
* interpreter.
*/
MterpPossibleException:
ldr x0, [xSELF, #THREAD_EXCEPTION_OFFSET]
cbz x0, MterpFallback // If not, fall back to reference interpreter.
/* intentional fallthrough - handle pending exception. */
/*
* On return from a runtime helper routine, we've found a pending exception.
* Can we handle it here - or need to bail out to caller?
*
*/
MterpException:
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpHandleException // (self, shadow_frame)
cbz w0, MterpExceptionReturn // no local catch, back to caller.
ldr x0, [xFP, #OFF_FP_DEX_INSTRUCTIONS]
ldr w1, [xFP, #OFF_FP_DEX_PC]
ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET]
add xPC, x0, x1, lsl #1 // generate new dex_pc_ptr
/* Do we need to switch interpreters? */
ldr w0, [xSELF, #THREAD_USE_MTERP_OFFSET]
cbz w0, MterpFallback
/* resume execution at catch block */
EXPORT_PC
FETCH_INST
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* NOTE: no fallthrough */
/*
* Common handling for branches with support for Jit profiling.
* On entry:
* wINST <= signed offset
* wPROFILE <= signed hotness countdown (expanded to 32 bits)
* condition bits <= set to establish sign of offset (use "NoFlags" entry if not)
*
* We have quite a few different cases for branch profiling, OSR detection and
* suspend check support here.
*
* Taken backward branches:
* If profiling active, do hotness countdown and report if we hit zero.
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
* Is there a pending suspend request? If so, suspend.
*
* Taken forward branches and not-taken backward branches:
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
*
* Our most common case is expected to be a taken backward branch with active jit profiling,
* but no full OSR check and no pending suspend request.
* Next most common case is not-taken branch with no full OSR check.
*
*/
MterpCommonTakenBranchNoFlags:
cmp wINST, #0
b.gt .L_forward_branch // don't add forward branches to hotness
tbnz wPROFILE, #31, .L_no_count_backwards // go if negative
subs wPROFILE, wPROFILE, #1 // countdown
b.eq .L_add_batch // counted down to zero - report
.L_resume_backward_branch:
ldr lr, [xSELF, #THREAD_FLAGS_OFFSET]
add w2, wINST, wINST // w2<- byte offset
FETCH_ADVANCE_INST_RB w2 // update rPC, load wINST
REFRESH_IBASE
ands lr, lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
b.ne .L_suspend_request_pending
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
.L_suspend_request_pending:
EXPORT_PC
mov x0, xSELF
bl MterpSuspendCheck // (self)
cbnz x0, MterpFallback
REFRESH_IBASE // might have changed during suspend
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
.L_no_count_backwards:
cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry?
b.ne .L_resume_backward_branch
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
mov x2, xINST
EXPORT_PC
bl MterpMaybeDoOnStackReplacement // (self, shadow_frame, offset)
cbnz x0, MterpOnStackReplacement
b .L_resume_backward_branch
.L_forward_branch:
cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry?
b.eq .L_check_osr_forward
.L_resume_forward_branch:
add w2, wINST, wINST // w2<- byte offset
FETCH_ADVANCE_INST_RB w2 // update rPC, load wINST
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
.L_check_osr_forward:
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
mov x2, xINST
EXPORT_PC
bl MterpMaybeDoOnStackReplacement // (self, shadow_frame, offset)
cbnz x0, MterpOnStackReplacement
b .L_resume_forward_branch
.L_add_batch:
add x1, xFP, #OFF_FP_SHADOWFRAME
strh wPROFILE, [x1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET]
ldr x0, [xFP, #OFF_FP_METHOD]
mov x2, xSELF
bl MterpAddHotnessBatch // (method, shadow_frame, self)
mov wPROFILE, w0 // restore new hotness countdown to wPROFILE
b .L_no_count_backwards
/*
* Entered from the conditional branch handlers when OSR check request active on
* not-taken path. All Dalvik not-taken conditional branch offsets are 2.
*/
.L_check_not_taken_osr:
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
mov x2, #2
EXPORT_PC
bl MterpMaybeDoOnStackReplacement // (self, shadow_frame, offset)
cbnz x0, MterpOnStackReplacement
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
/*
* Check for suspend check request. Assumes wINST already loaded, xPC advanced and
* still needs to get the opcode and branch to it, and flags are in lr.
*/
MterpCheckSuspendAndContinue:
ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh xIBASE
ands w7, w7, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
b.ne check1
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
check1:
EXPORT_PC
mov x0, xSELF
bl MterpSuspendCheck // (self)
cbnz x0, MterpFallback // Something in the environment changed, switch interpreters
GET_INST_OPCODE ip // extract opcode from wINST
GOTO_OPCODE ip // jump to next instruction
/*
* On-stack replacement has happened, and now we've returned from the compiled method.
*/
MterpOnStackReplacement:
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
sxtw x2, wINST
bl MterpLogOSR
#endif
mov x0, #1 // Signal normal return
b MterpDone
/*
* Bail out to reference interpreter.
*/
MterpFallback:
EXPORT_PC
#if MTERP_LOGGING
mov x0, xSELF
add x1, xFP, #OFF_FP_SHADOWFRAME
bl MterpLogFallback
#endif
MterpCommonFallback:
mov x0, #0 // signal retry with reference interpreter.
b MterpDone
/*
* We pushed some registers on the stack in ExecuteMterpImpl, then saved
* SP and LR. Here we restore SP, restore the registers, and then restore
* LR to PC.
*
* On entry:
* uint32_t* xFP (should still be live, pointer to base of vregs)
*/
MterpExceptionReturn:
mov x0, #1 // signal return to caller.
b MterpDone
MterpReturn:
ldr x2, [xFP, #OFF_FP_RESULT_REGISTER]
str x0, [x2]
mov x0, #1 // signal return to caller.
MterpDone:
/*
* At this point, we expect wPROFILE to be non-zero. If negative, hotness is disabled or we're
* checking for OSR. If greater than zero, we might have unreported hotness to register
* (the difference between the ending wPROFILE and the cached hotness counter). wPROFILE
* should only reach zero immediately after a hotness decrement, and is then reset to either
* a negative special state or the new non-zero countdown value.
*/
cmp wPROFILE, #0
bgt MterpProfileActive // if > 0, we may have some counts to report.
.cfi_remember_state
RESTORE_TWO_REGS fp, lr, 64
RESTORE_TWO_REGS xPC, xFP, 48
RESTORE_TWO_REGS xSELF, xINST, 32
RESTORE_TWO_REGS xIBASE, xREFS, 16
RESTORE_TWO_REGS_DECREASE_FRAME xPROFILE, x27, 80
ret
.cfi_restore_state // Reset unwind info so following code unwinds.
.cfi_def_cfa_offset 80 // workaround for clang bug: 31975598
MterpProfileActive:
mov xINST, x0 // stash return value
/* Report cached hotness counts */
ldr x0, [xFP, #OFF_FP_METHOD]
add x1, xFP, #OFF_FP_SHADOWFRAME
mov x2, xSELF
strh wPROFILE, [x1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET]
bl MterpAddHotnessBatch // (method, shadow_frame, self)
mov x0, xINST // restore return value
RESTORE_TWO_REGS fp, lr, 64
RESTORE_TWO_REGS xPC, xFP, 48
RESTORE_TWO_REGS xSELF, xINST, 32
RESTORE_TWO_REGS xIBASE, xREFS, 16
RESTORE_TWO_REGS_DECREASE_FRAME xPROFILE, x27, 80
ret
%def instruction_end():
.type artMterpAsmInstructionEnd, #object
.hidden artMterpAsmInstructionEnd
.global artMterpAsmInstructionEnd
artMterpAsmInstructionEnd:
%def instruction_start():
.type artMterpAsmInstructionStart, #object
.hidden artMterpAsmInstructionStart
.global artMterpAsmInstructionStart
artMterpAsmInstructionStart = .L_op_nop
.text
%def opcode_start():
ENTRY Mterp_${opcode}
%def opcode_end():
END Mterp_${opcode}
%def helper_start(name):
ENTRY ${name}
%def helper_end(name):
END ${name}