blob: fd884803eae81b67369263715bd3d8b4d9fc3e53 [file] [log] [blame]
#
# Copyright (C) 2011 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
LOCAL_PATH := $(call my-dir)
art_path := $(LOCAL_PATH)
########################################################################
# clean-oat rules
#
include $(art_path)/build/Android.common_path.mk
.PHONY: clean-oat
clean-oat: clean-oat-host clean-oat-target
.PHONY: clean-oat-host
clean-oat-host:
find $(OUT_DIR) '(' -name '*.oat' -o -name '*.odex' -o -name '*.art' -o -name '*.vdex' ')' -a -type f | xargs rm -f
rm -rf $(TMPDIR)/*/test-*/dalvik-cache/*
rm -rf $(TMPDIR)/android-data/dalvik-cache/*
.PHONY: clean-oat-target
clean-oat-target:
$(ADB) root
$(ADB) wait-for-device remount
$(ADB) shell rm -rf $(ART_TARGET_NATIVETEST_DIR)
$(ADB) shell rm -rf $(ART_TARGET_TEST_DIR)
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*/*
$(ADB) shell rm -rf $(ART_DEXPREOPT_BOOT_JAR_DIR)/$(DEX2OAT_TARGET_ARCH)
$(ADB) shell rm -rf system/app/$(DEX2OAT_TARGET_ARCH)
ifdef TARGET_2ND_ARCH
$(ADB) shell rm -rf $(ART_DEXPREOPT_BOOT_JAR_DIR)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)
$(ADB) shell rm -rf system/app/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)
endif
$(ADB) shell rm -rf data/run-test/test-*/dalvik-cache/*
########################################################################
# cpplint rules to style check art source files
include $(art_path)/build/Android.cpplint.mk
########################################################################
# product rules
include $(art_path)/oatdump/Android.mk
include $(art_path)/tools/ahat/Android.mk
include $(art_path)/tools/dexfuzz/Android.mk
include $(art_path)/tools/veridex/Android.mk
ART_HOST_DEPENDENCIES := \
$(ART_HOST_EXECUTABLES) \
$(ART_HOST_DEX_DEPENDENCIES) \
$(ART_HOST_SHARED_LIBRARY_DEPENDENCIES)
ifeq ($(ART_BUILD_HOST_DEBUG),true)
ART_HOST_DEPENDENCIES += $(ART_HOST_SHARED_LIBRARY_DEBUG_DEPENDENCIES)
endif
ART_TARGET_DEPENDENCIES := \
$(ART_TARGET_DEX_DEPENDENCIES)
########################################################################
# test rules
# All the dependencies that must be built ahead of sync-ing them onto the target device.
TEST_ART_TARGET_SYNC_DEPS := $(ADB_EXECUTABLE)
include $(art_path)/build/Android.common_test.mk
include $(art_path)/build/Android.gtest.mk
include $(art_path)/test/Android.run-test.mk
TEST_ART_TARGET_SYNC_DEPS += $(ART_TEST_TARGET_GTEST_DEPENDENCIES) $(ART_TEST_TARGET_RUN_TEST_DEPENDENCIES)
# Make sure /system is writable on the device.
TEST_ART_ADB_ROOT_AND_REMOUNT := \
($(ADB) root && \
$(ADB) wait-for-device remount && \
(($(ADB) shell touch /system/testfile && \
($(ADB) shell rm /system/testfile || true)) || \
($(ADB) disable-verity && \
$(ADB) reboot && \
$(ADB) wait-for-device root && \
$(ADB) wait-for-device remount)))
# "mm test-art" to build and run all tests on host and device
.PHONY: test-art
test-art: test-art-host test-art-target
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-gtest
test-art-gtest: test-art-host-gtest test-art-target-gtest
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-run-test
test-art-run-test: test-art-host-run-test test-art-target-run-test
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
########################################################################
# host test rules
VIXL_TEST_DEPENDENCY :=
# We can only run the vixl tests on 64-bit hosts (vixl testing issue) when its a
# top-level build (to declare the vixl test rule).
ifneq ($(HOST_PREFER_32_BIT),true)
ifeq ($(ONE_SHOT_MAKEFILE),)
VIXL_TEST_DEPENDENCY := run-vixl-tests
endif
endif
.PHONY: test-art-host-vixl
test-art-host-vixl: $(VIXL_TEST_DEPENDENCY)
# "mm test-art-host" to build and run all host tests.
.PHONY: test-art-host
test-art-host: test-art-host-gtest test-art-host-run-test \
test-art-host-vixl test-art-host-dexdump
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely with the default compiler.
.PHONY: test-art-host-default
test-art-host-default: test-art-host-run-test-default
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely with the optimizing compiler.
.PHONY: test-art-host-optimizing
test-art-host-optimizing: test-art-host-run-test-optimizing
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely on the interpreter.
.PHONY: test-art-host-interpreter
test-art-host-interpreter: test-art-host-run-test-interpreter
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All host tests that run solely on the jit.
.PHONY: test-art-host-jit
test-art-host-jit: test-art-host-run-test-jit
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Primary host architecture variants:
.PHONY: test-art-host$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(ART_PHONY_TEST_HOST_SUFFIX) \
test-art-host-run-test$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Secondary host architecture variants:
ifneq ($(HOST_PREFER_32_BIT),true)
.PHONY: test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(2ND_ART_PHONY_TEST_HOST_SUFFIX) \
test-art-host-run-test$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
endif
# Dexdump/list regression test.
.PHONY: test-art-host-dexdump
test-art-host-dexdump: $(addprefix $(HOST_OUT_EXECUTABLES)/, dexdump dexlist)
ANDROID_HOST_OUT=$(realpath $(HOST_OUT)) art/test/dexdump/run-all-tests
########################################################################
# target test rules
# "mm test-art-target" to build and run all target tests.
.PHONY: test-art-target
test-art-target: test-art-target-gtest test-art-target-run-test
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely with the default compiler.
.PHONY: test-art-target-default
test-art-target-default: test-art-target-run-test-default
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely with the optimizing compiler.
.PHONY: test-art-target-optimizing
test-art-target-optimizing: test-art-target-run-test-optimizing
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely on the interpreter.
.PHONY: test-art-target-interpreter
test-art-target-interpreter: test-art-target-run-test-interpreter
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# All target tests that run solely on the jit.
.PHONY: test-art-target-jit
test-art-target-jit: test-art-target-run-test-jit
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Primary target architecture variants:
.PHONY: test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(ART_PHONY_TEST_TARGET_SUFFIX) \
test-art-target-run-test$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
# Secondary target architecture variants:
ifdef 2ND_ART_PHONY_TEST_TARGET_SUFFIX
.PHONY: test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) \
test-art-target-run-test$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
.PHONY: test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)
$(hide) $(call ART_TEST_PREREQ_FINISHED,$@)
endif
#######################
# Reset LOCAL_PATH because previous includes may override its value.
# Keep this after all "include $(art_path)/..." are done, and before any
# "include $(BUILD_...)".
LOCAL_PATH := $(art_path)
# Create canonical name -> file name symlink in the symbol directory for the
# debug APEX. The symbol files for it are installed to
# $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art.debug. However, since it's
# available via /apex/com.android.art at runtime, create a symlink so that
# $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art is linked to
# $(TARGET_OUT_UNSTRIPPED)/apex/$(TARGET_ART_APEX). We skip this for the release
# APEX which has com.android.art as $(TARGET_ART_APEX). Note that installation
# of the symlink is triggered by the apex_manifest.pb file which is the file
# that is guaranteed to be created regardless of the value of
# TARGET_FLATTEN_APEX.
# TODO(b/171419613): the symlink is disabled because the
# $OUT/symbols/apex/com.android.art name is taken by the com.android.art apex
# even when com.android.art.debug is selected by TARGET_ART_APEX.
# Disabling the symlink means that symbols for the com.android.art.debug apex
# will not be found.
ifeq ($(TARGET_FLATTEN_APEX),true)
art_apex_manifest_file := $(PRODUCT_OUT)/system/apex/$(TARGET_ART_APEX)/apex_manifest.pb
else
art_apex_manifest_file := $(PRODUCT_OUT)/apex/$(TARGET_ART_APEX)/apex_manifest.pb
endif
art_apex_symlink_timestamp := $(call intermediates-dir-for,FAKE,com.android.art)/symlink.timestamp
$(art_apex_manifest_file): $(art_apex_symlink_timestamp)
$(art_apex_manifest_file): PRIVATE_LINK_NAME := $(TARGET_OUT_UNSTRIPPED)/apex/com.android.art
$(art_apex_symlink_timestamp):
#ifeq ($(TARGET_ART_APEX),com.android.art)
# $(hide) if [ -L $(PRIVATE_LINK_NAME) ]; then rm -f $(PRIVATE_LINK_NAME); fi
#else
# $(hide) mkdir -p $(dir $(PRIVATE_LINK_NAME))
# $(hide) rm -rf $(PRIVATE_LINK_NAME)
# $(hide) ln -sf $(TARGET_ART_APEX) $(PRIVATE_LINK_NAME)
#endif
$(hide) touch $@
$(art_apex_symlink_timestamp): .KATI_SYMLINK_OUTPUTS := $(PRIVATE_LINK_NAME)
art_apex_manifest_file :=
#######################
# Fake packages for ART
# The art-runtime package depends on the core ART libraries and binaries. It exists so we can
# manipulate the set of things shipped, e.g., add debug versions and so on.
include $(CLEAR_VARS)
LOCAL_MODULE := art-runtime
# Reference the libraries and binaries in the appropriate APEX module, because
# they don't have platform variants. However if
# SOONG_CONFIG_art_module_source_build isn't true then the APEX modules are
# disabled, so Soong won't apply the APEX mutators to them, and then they are
# available with their plain names.
ifeq (true,$(SOONG_CONFIG_art_module_source_build))
art_module_lib = $(1).com.android.art
art_module_debug_lib = $(1).com.android.art.debug
else
art_module_lib = $(1)
art_module_debug_lib = $(1)
endif
# Base requirements.
LOCAL_REQUIRED_MODULES := \
$(call art_module_lib,dalvikvm) \
$(call art_module_lib,dex2oat) \
$(call art_module_lib,dexoptanalyzer) \
$(call art_module_lib,libart) \
$(call art_module_lib,libart-compiler) \
$(call art_module_lib,libopenjdkjvm) \
$(call art_module_lib,libopenjdkjvmti) \
$(call art_module_lib,odrefresh) \
$(call art_module_lib,profman) \
$(call art_module_lib,libadbconnection) \
$(call art_module_lib,libperfetto_hprof) \
# Potentially add in debug variants:
#
# * We will never add them if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD = false.
# * We will always add them if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD = true.
# * Otherwise, we will add them by default to userdebug and eng builds.
art_target_include_debug_build := $(PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD)
ifneq (false,$(art_target_include_debug_build))
ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
art_target_include_debug_build := true
endif
ifeq (true,$(art_target_include_debug_build))
LOCAL_REQUIRED_MODULES += \
$(call art_module_debug_lib,dex2oatd) \
$(call art_module_debug_lib,dexoptanalyzerd) \
$(call art_module_debug_lib,libartd) \
$(call art_module_debug_lib,libartd-compiler) \
$(call art_module_debug_lib,libopenjdkd) \
$(call art_module_debug_lib,libopenjdkjvmd) \
$(call art_module_debug_lib,libopenjdkjvmtid) \
$(call art_module_debug_lib,profmand) \
$(call art_module_debug_lib,libadbconnectiond) \
$(call art_module_debug_lib,libperfetto_hprofd) \
endif
endif
art_module_lib :=
art_module_debug_lib :=
include $(BUILD_PHONY_PACKAGE)
# The art-tools package depends on helpers and tools that are useful for developers. Similar
# dependencies exist for the APEX builds for these tools (see build/apex/Android.bp).
ifneq ($(HOST_OS),darwin)
include $(CLEAR_VARS)
LOCAL_MODULE := art-tools
LOCAL_IS_HOST_MODULE := true
LOCAL_REQUIRED_MODULES := \
ahat \
dexdump \
hprof-conv \
# A subset of the tools are disabled when HOST_PREFER_32_BIT is defined as make reports that
# they are not supported on host (b/129323791). This is likely due to art_apex disabling host
# APEX builds when HOST_PREFER_32_BIT is set (b/120617876).
ifneq ($(HOST_PREFER_32_BIT),true)
LOCAL_REQUIRED_MODULES += \
dexdiag \
dexlist \
oatdump \
endif
include $(BUILD_PHONY_PACKAGE)
endif # HOST_OS != darwin
####################################################################################################
# Fake packages to ensure generation of libopenjdkd when one builds with mm/mmm/mmma.
#
# The library is required for starting a runtime in debug mode, but libartd does not depend on it
# (dependency cycle otherwise).
#
# Note: * As the package is phony to create a dependency the package name is irrelevant.
# * We make MULTILIB explicit to "both," just to state here that we want both libraries on
# 64-bit systems, even if it is the default.
# ART on the host.
ifneq ($(HOST_OS),darwin)
ifeq ($(ART_BUILD_HOST_DEBUG),true)
include $(CLEAR_VARS)
LOCAL_MODULE := art-libartd-libopenjdkd-host-dependency
LOCAL_MULTILIB := both
LOCAL_REQUIRED_MODULES := libopenjdkd
LOCAL_IS_HOST_MODULE := true
include $(BUILD_PHONY_PACKAGE)
endif
endif # HOST_OS != darwin
########################################################################
# "m build-art" for quick minimal build
.PHONY: build-art
build-art: build-art-host build-art-target
# For host, we extract the ICU data from the apex and install it to HOST_OUT/I18N_APEX.
$(HOST_I18N_DATA): $(TARGET_OUT)/apex/$(I18N_APEX).apex $(HOST_OUT)/bin/deapexer
$(call extract-from-apex,$(I18N_APEX))
rm -rf $(HOST_OUT)/$(I18N_APEX)
mkdir -p $(HOST_OUT)/$(I18N_APEX)/
cp -R $(TARGET_OUT)/apex/$(I18N_APEX)/etc/ $(HOST_OUT)/$(I18N_APEX)/
touch $@
$(HOST_TZDATA_DATA): $(TARGET_OUT)/apex/$(TZDATA_APEX).apex $(HOST_OUT)/bin/deapexer
$(call extract-from-apex,$(TZDATA_APEX))
rm -rf $(HOST_OUT)/$(TZDATA_APEX)
mkdir -p $(HOST_OUT)/$(TZDATA_APEX)/
cp -R $(TARGET_OUT)/apex/$(TZDATA_APEX)/etc/ $(HOST_OUT)/$(TZDATA_APEX)/
touch $@
.PHONY: build-art-host
build-art-host: $(HOST_OUT_EXECUTABLES)/art $(ART_HOST_DEPENDENCIES) $(HOST_CORE_IMG_OUTS) $(HOST_I18N_DATA) $(HOST_TZDATA_DATA)
.PHONY: build-art-target
build-art-target: $(TARGET_OUT_EXECUTABLES)/art $(ART_TARGET_DEPENDENCIES) $(TARGET_CORE_IMG_OUTS)
PRIVATE_ART_APEX_DEPENDENCY_FILES := \
bin/dalvikvm32 \
bin/dalvikvm64 \
bin/dalvikvm \
bin/dex2oat32 \
bin/dex2oat64 \
bin/dexdump \
PRIVATE_ART_APEX_DEPENDENCY_LIBS := \
lib/libadbconnection.so \
lib/libandroidio.so \
lib/libartbase.so \
lib/libart-compiler.so \
lib/libart-dexlayout.so \
lib/libart-disassembler.so \
lib/libartpalette.so \
lib/libart.so \
lib/libbacktrace.so \
lib/libdexfile_external.so \
lib/libdexfile_support.so \
lib/libdexfile.so \
lib/libdt_fd_forward.so \
lib/libdt_socket.so \
lib/libexpat.so \
lib/libjavacore.so \
lib/libjdwp.so \
lib/liblzma.so \
lib/libmeminfo.so \
lib/libnativebridge.so \
lib/libnativehelper.so \
lib/libnativeloader.so \
lib/libnpt.so \
lib/libopenjdkjvm.so \
lib/libopenjdkjvmti.so \
lib/libopenjdk.so \
lib/libpac.so \
lib/libprocinfo.so \
lib/libprofile.so \
lib/libsigchain.so \
lib/libunwindstack.so \
lib/libvixl.so \
lib/libziparchive.so \
lib64/libadbconnection.so \
lib64/libandroidio.so \
lib64/libartbase.so \
lib64/libart-compiler.so \
lib64/libart-dexlayout.so \
lib64/libart-disassembler.so \
lib64/libartpalette.so \
lib64/libart.so \
lib64/libbacktrace.so \
lib64/libdexfile_external.so \
lib64/libdexfile_support.so \
lib64/libdexfile.so \
lib64/libdt_fd_forward.so \
lib64/libdt_socket.so \
lib64/libexpat.so \
lib64/libjavacore.so \
lib64/libjdwp.so \
lib64/liblzma.so \
lib64/libmeminfo.so \
lib64/libnativebridge.so \
lib64/libnativehelper.so \
lib64/libnativeloader.so \
lib64/libnpt.so \
lib64/libopenjdkjvm.so \
lib64/libopenjdkjvmti.so \
lib64/libopenjdk.so \
lib64/libpac.so \
lib64/libprocinfo.so \
lib64/libprofile.so \
lib64/libsigchain.so \
lib64/libunwindstack.so \
lib64/libvixl.so \
lib64/libziparchive.so \
PRIVATE_RUNTIME_APEX_DEPENDENCY_FILES := \
bin/linker \
bin/linker64 \
lib/bionic/libc.so \
lib/bionic/libdl.so \
lib/bionic/libdl_android.so \
lib/bionic/libm.so \
lib64/bionic/libc.so \
lib64/bionic/libdl.so \
lib64/bionic/libdl_android.so \
lib64/bionic/libm.so \
PRIVATE_CONSCRYPT_APEX_DEPENDENCY_LIBS := \
lib/libcrypto.so \
lib/libjavacrypto.so \
lib/libssl.so \
lib64/libcrypto.so \
lib64/libjavacrypto.so \
lib64/libssl.so \
PRIVATE_I18N_APEX_DEPENDENCY_LIBS := \
lib/libicu.so \
lib/libicui18n.so \
lib/libicu_jni.so \
lib/libicuuc.so \
lib64/libicu.so \
lib64/libicui18n.so \
lib64/libicu_jni.so \
lib64/libicuuc.so \
# Extracts files from an APEX into a location. The APEX can be either a .apex
# file in $(TARGET_OUT)/apex, or a directory in the same location. Files are
# extracted to $(TARGET_OUT) with the same relative paths as under the APEX
# root.
# $(1): APEX base name
# $(2): List of files to extract, with paths relative to the APEX root
#
# "cp -d" below doesn't work on Darwin, but this is only used for Golem builds
# and won't run on mac anyway.
define extract-from-apex
apex_root=$(TARGET_OUT)/apex && \
apex_file=$$apex_root/$(1).apex && \
apex_dir=$$apex_root/$(1) && \
if [ -f $$apex_file ]; then \
rm -rf $$apex_dir && \
mkdir -p $$apex_dir && \
debugfs=$(HOST_OUT)/bin/debugfs_static && \
$(HOST_OUT)/bin/deapexer --debugfs_path $$debugfs extract $$apex_file $$apex_dir; \
fi && \
for f in $(2); do \
sf=$$apex_dir/$$f && \
df=$(TARGET_OUT)/$$f && \
if [ -f $$sf -o -h $$sf ]; then \
mkdir -p $$(dirname $$df) && \
cp -fd $$sf $$df; \
fi || exit 1; \
done
endef
# Copy or extract some required files from APEXes to the `system` (TARGET_OUT)
# directory. This is dangerous as these files could inadvertently stay in this
# directory and be included in a system image.
#
# This target is only used by Golem now.
#
# NB Android build does not use cp from:
# $ANDROID_BUILD_TOP/prebuilts/build-tools/path/{linux-x86,darwin-x86}
# which has a non-standard set of command-line flags.
#
# TODO(b/129332183): Remove this when Golem has full support for the
# ART APEX.
.PHONY: standalone-apex-files
standalone-apex-files: deapexer \
$(RELEASE_ART_APEX) \
$(RUNTIME_APEX) \
$(CONSCRYPT_APEX) \
$(I18N_APEX) \
$(TZDATA_APEX)
$(call extract-from-apex,$(RELEASE_ART_APEX),\
$(PRIVATE_ART_APEX_DEPENDENCY_LIBS) $(PRIVATE_ART_APEX_DEPENDENCY_FILES))
# The Runtime APEX has the Bionic libs in ${LIB}/bionic subdirectories,
# so we need to move them up a level after extraction.
# Also, platform libraries are installed in prebuilts, so copy them over.
$(call extract-from-apex,$(RUNTIME_APEX),\
$(PRIVATE_RUNTIME_APEX_DEPENDENCY_FILES)) && \
for libdir in $(TARGET_OUT)/lib $(TARGET_OUT)/lib64; do \
if [ -d $$libdir/bionic ]; then \
mv -f $$libdir/bionic/*.so $$libdir; \
fi || exit 1; \
done && \
for libdir in $(TARGET_OUT)/lib $(TARGET_OUT)/lib64; do \
if [ -d $$libdir ]; then \
cp prebuilts/runtime/mainline/platform/impl/$(TARGET_ARCH)/*.so $$libdir; \
fi || exit 1; \
done
$(call extract-from-apex,$(CONSCRYPT_APEX),\
$(PRIVATE_CONSCRYPT_APEX_DEPENDENCY_LIBS))
$(call extract-from-apex,$(I18N_APEX),\
$(PRIVATE_I18N_APEX_DEPENDENCY_LIBS))
$(call extract-from-apex,$(TZDATA_APEX),)
########################################################################
# Phony target for only building what go/lem requires for pushing ART on /data.
.PHONY: build-art-target-golem
# Also include libartbenchmark, we always include it when running golem.
# libstdc++ is needed when building for ART_TARGET_LINUX.
# Also include the Bionic libraries (libc, libdl, libdl_android, libm) and
# linker.
#
# TODO(b/129332183): Remove this when Golem has full support for the
# ART APEX.
ART_TARGET_SHARED_LIBRARY_BENCHMARK := $(TARGET_OUT_SHARED_LIBRARIES)/libartbenchmark.so
ART_TARGET_SHARED_LIBRARY_PALETTE_DEPENDENCIES := \
$(TARGET_OUT_SHARED_LIBRARIES)/libcutils.so \
$(TARGET_OUT_SHARED_LIBRARIES)/libprocessgroup.so \
$(TARGET_OUT_SHARED_LIBRARIES)/libselinux.so \
$(TARGET_OUT_SHARED_LIBRARIES)/libtombstoned_client.so
build-art-target-golem: $(RELEASE_ART_APEX) com.android.runtime $(CONSCRYPT_APEX) \
$(TARGET_OUT_EXECUTABLES)/art \
$(TARGET_OUT_EXECUTABLES)/dex2oat_wrapper \
$(TARGET_OUT)/etc/public.libraries.txt \
$(ART_TARGET_SHARED_LIBRARY_BENCHMARK) \
$(ART_TARGET_SHARED_LIBRARY_PALETTE_DEPENDENCIES) \
$(TARGET_OUT_SHARED_LIBRARIES)/libz.so \
$(TARGET_OUT_SHARED_LIBRARIES)/liblz4.so \
libartpalette-system \
standalone-apex-files
# remove debug libraries from public.libraries.txt because golem builds
# won't have it.
sed -i '/libartd.so/d' $(TARGET_OUT)/etc/public.libraries.txt
sed -i '/libdexfiled.so/d' $(TARGET_OUT)/etc/public.libraries.txt
sed -i '/libprofiled.so/d' $(TARGET_OUT)/etc/public.libraries.txt
sed -i '/libartbased.so/d' $(TARGET_OUT)/etc/public.libraries.txt
########################################################################
# Phony target for building what go/lem requires on host.
.PHONY: build-art-host-golem
# Also include libartbenchmark, we always include it when running golem.
ART_HOST_SHARED_LIBRARY_BENCHMARK := $(ART_HOST_OUT_SHARED_LIBRARIES)/libartbenchmark.so
build-art-host-golem: build-art-host \
$(ART_HOST_SHARED_LIBRARY_BENCHMARK) \
$(HOST_OUT_EXECUTABLES)/dex2oat_wrapper
########################################################################
# Phony target for building what go/lem requires for syncing /system to target.
.PHONY: build-art-unbundled-golem
art_apex_jars := $(foreach pair,$(ART_APEX_JARS), $(call word-colon,2,$(pair)))
build-art-unbundled-golem: art-runtime linker oatdump $(art_apex_jars) conscrypt crash_dump
########################################################################
# Rules for building all dependencies for tests.
.PHONY: build-art-host-tests
build-art-host-tests: build-art-host $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES)
.PHONY: build-art-target-tests
build-art-target-tests: build-art-target $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_TARGET_RUN_TEST_DEPENDENCIES) $(ART_TEST_TARGET_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES)
########################################################################
# targets to switch back and forth from libdvm to libart
.PHONY: use-art
use-art:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell start
.PHONY: use-artd
use-artd:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so
$(ADB) shell start
.PHONY: use-dalvik
use-dalvik:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libdvm.so
$(ADB) shell start
.PHONY: use-art-full
use-art-full:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter \"\"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter \"\"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-artd-full
use-artd-full:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter \"\"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter \"\"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-art-jit
use-art-jit:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "verify-at-runtime"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "verify-at-runtime"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit true
$(ADB) shell start
.PHONY: use-art-interpret-only
use-art-interpret-only:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "interpret-only"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "interpret-only"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-artd-interpret-only
use-artd-interpret-only:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "interpret-only"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "interpret-only"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libartd.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
.PHONY: use-art-verify-none
use-art-verify-none:
$(ADB) root
$(ADB) wait-for-device shell stop
$(ADB) shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*
$(ADB) shell setprop dalvik.vm.dex2oat-filter "verify-none"
$(ADB) shell setprop dalvik.vm.image-dex2oat-filter "verify-none"
$(ADB) shell setprop persist.sys.dalvik.vm.lib.2 libart.so
$(ADB) shell setprop dalvik.vm.usejit false
$(ADB) shell start
########################################################################
# Clear locally used variables.
TEST_ART_TARGET_SYNC_DEPS :=
# Helper target that depends on boot image creation.
#
# Can be used, for example, to dump initialization failures:
# m art-boot-image ART_BOOT_IMAGE_EXTRA_ARGS=--dump-init-failures=fails.txt
.PHONY: art-boot-image
art-boot-image: $(DEXPREOPT_IMAGE_boot_$(TARGET_ARCH))
.PHONY: art-job-images
art-job-images: \
art-boot-image \
$(2ND_DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME) \
$(HOST_OUT_EXECUTABLES)/dex2oats \
$(HOST_OUT_EXECUTABLES)/dex2oatds \
$(HOST_OUT_EXECUTABLES)/profman
########################################################################
# Build a target that contains dex public SDK stubs for SDK version in the list.
# Zip files structure:
# public-sdk-28-stub.zip
# classes.dex
# public-sdk-29-stub.zip
# classes.dex
# public-sdk-30-stub.zip
# classes.dex
MIN_SDK_VERSION := 28
SDK_VERSIONS := $(call numbers_greater_or_equal_to,$(MIN_SDK_VERSION),$(TARGET_AVAIALBLE_SDK_VERSIONS))
# Create dex public SDK stubs.
define get_public_sdk_stub_dex
$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/public_sdk_$(1)_stub_intermediates/classes.dex
endef
# The input is the SDK version.
define create_public_sdk_dex
public_sdk_$(1)_stub := $$(call get_public_sdk_stub_dex,$(1))
$$(public_sdk_$(1)_stub): PRIVATE_MIN_SDK_VERSION := $(1)
$$(public_sdk_$(1)_stub): $$(call resolve-prebuilt-sdk-jar-path,$(1)) $$(DX) $$(ZIP2ZIP)
$$(transform-classes.jar-to-dex)
endef
$(foreach version,$(SDK_VERSIONS),$(eval $(call create_public_sdk_dex,$(version))))
# Create dex public SDK stubs zip.
define get_public_sdk_stub_zip
$(call intermediates-dir-for,PACKAGING,public_sdk_stub,HOST)/public-sdk-$(1)-stub.zip
endef
define create_public_sdk_zip
PUBLIC_SDK_$(1)_STUB_ZIP_PATH := $$(call get_public_sdk_stub_zip,$(1))
$$(PUBLIC_SDK_$(1)_STUB_ZIP_PATH): PRIVATE_SDK_STUBS_DEX_DIR := $$(dir $$(public_sdk_$(1)_stub))
$$(PUBLIC_SDK_$(1)_STUB_ZIP_PATH): $$(SOONG_ZIP) $$(public_sdk_$(1)_stub)
rm -f $$@
$$(SOONG_ZIP) -o $$@ -C $$(PRIVATE_SDK_STUBS_DEX_DIR) -D $$(PRIVATE_SDK_STUBS_DEX_DIR)
endef
$(foreach version,$(SDK_VERSIONS),$(eval $(call create_public_sdk_zip,$(version))))
# Make the zip files available for prebuilts.
$(foreach version,$(SDK_VERSIONS),$(call dist-for-goals,sdk,$(call get_public_sdk_stub_zip,$(version))))
STUB_ZIP_FILES = $(foreach version,$(SDK_VERSIONS),$(call get_public_sdk_stub_zip,$(version)))
.PHONY: public_sdk_stubs
public_sdk_stubs: $(STUB_ZIP_FILES)
MIN_SDK_VERSION :=
SDK_VERSIONS :=