blob: 46d966c6354db86cb03ce723b392d0b37a00b0f8 [file] [log] [blame]
#!/bin/bash
#
# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Set up prog to be the path of this script, including following symlinks,
# and set up progdir to be the fully-qualified pathname of its directory.
prog="$0"
while [ -h "${prog}" ]; do
newProg=`/bin/ls -ld "${prog}"`
newProg=`expr "${newProg}" : ".* -> \(.*\)$"`
if expr "x${newProg}" : 'x/' >/dev/null; then
prog="${newProg}"
else
progdir=`dirname "${prog}"`
prog="${progdir}/${newProg}"
fi
done
oldwd=`pwd`
progdir=`dirname "${prog}"`
cd "${progdir}"
progdir=`pwd`
prog="${progdir}"/`basename "${prog}"`
test_dir="test-$$"
tmp_dir="/tmp/${test_dir}"
export JAVA="java"
export JAVAC="javac -g -target 1.5"
export RUN="${progdir}/etc/push-and-run-test-jar"
export DEX_LOCATION=/data/run-test/${test_dir}
export NEED_DEX="true"
# If dx was not set by the environment variable, assume it is in the path.
if [ -z "$DX" ]; then
export DX="dx"
fi
info="info.txt"
build="build"
run="run"
expected="expected.txt"
output="output.txt"
build_output="build-output.txt"
run_args="--quiet"
target_mode="yes"
dev_mode="no"
update_mode="no"
debug_mode="no"
usage="no"
build_only="no"
while true; do
if [ "x$1" = "x--host" ]; then
target_mode="no"
RUN="${progdir}/etc/host-run-test-jar"
DEX_LOCATION=$tmp_dir
shift
elif [ "x$1" = "x--jvm" ]; then
target_mode="no"
RUN="${progdir}/etc/reference-run-test-classes"
NEED_DEX="false"
shift
elif [ "x$1" = "x-O" ]; then
run_args="${run_args} -O"
shift
elif [ "x$1" = "x--debug" ]; then
run_args="${run_args} --debug"
shift
elif [ "x$1" = "x--gdb" ]; then
run_args="${run_args} --gdb"
dev_mode="yes"
shift
elif [ "x$1" = "x--zygote" ]; then
run_args="${run_args} --zygote"
shift
elif [ "x$1" = "x--interpreter" ]; then
run_args="${run_args} --interpreter"
shift
elif [ "x$1" = "x--no-verify" ]; then
run_args="${run_args} --no-verify"
shift
elif [ "x$1" = "x--no-optimize" ]; then
run_args="${run_args} --no-optimize"
shift
elif [ "x$1" = "x--no-precise" ]; then
run_args="${run_args} --no-precise"
shift
elif [ "x$1" = "x--invoke-with" ]; then
shift
what="$1"
run_args="${run_args} --invoke-with \"${what}\""
shift
elif [ "x$1" = "x--dev" ]; then
run_args="${run_args} --dev"
dev_mode="yes"
shift
elif [ "x$1" = "x--build-only" ]; then
build_only="yes"
shift
elif [ "x$1" = "x--output-path" ]; then
shift
tmp_dir=$1
shift
elif [ "x$1" = "x--update" ]; then
update_mode="yes"
shift
elif [ "x$1" = "x--help" ]; then
usage="yes"
shift
elif expr "x$1" : "x--" >/dev/null 2>&1; then
echo "unknown $0 option: $1" 1>&2
usage="yes"
break
else
break
fi
done
if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then
echo "--dev and --update are mutually exclusive" 1>&2
usage="yes"
fi
if [ "$usage" = "no" ]; then
if [ "x$1" = "x" -o "x$1" = "x-" ]; then
test_dir=`basename "$oldwd"`
else
test_dir="$1"
fi
if [ '!' -d "$test_dir" ]; then
td2=`echo ${test_dir}-*`
if [ '!' -d "$td2" ]; then
echo "${test_dir}: no such test directory" 1>&2
usage="yes"
fi
test_dir="$td2"
fi
# Shift to get rid of the test name argument. The rest of the arguments
# will get passed to the test run.
shift
fi
if [ "$usage" = "yes" ]; then
prog=`basename $prog`
(
echo "usage:"
echo " $prog --help Print this message."
echo " $prog [options] [test-name] Run test normally."
echo " $prog --dev [options] [test-name] Development mode" \
"(dumps to stdout)."
echo " $prog --update [options] [test-name] Update mode" \
"(replaces expected.txt)."
echo ' Omitting the test name or specifying "-" will use the' \
"current directory."
echo " Runtime Options:"
echo " -O Run oatexec rather than oatexecd (off by default)."
echo " --debug Wait for a debugger to attach."
echo " --gdb Run under gdb; incompatible with some tests."
echo " --build-only Build test files only (off by default)."
echo " --interpreter Enable interpreter only mode (off by default)."
echo " --no-verify Turn off verification (on by default)."
echo " --no-optimize Turn off optimization (on by default)."
echo " --no-precise Turn off precise GC (on by default)."
echo " --zygote Spawn the process from the Zygote." \
"If used, then the"
echo " other runtime options are ignored."
echo " --host Use the host-mode virtual machine."
echo " --valgrind Use valgrind when running locally."
echo " --jvm Use a host-local RI virtual machine."
echo " --output-path [path] Location where to store the build" \
"files."
) 1>&2
exit 1
fi
cd "$test_dir"
test_dir=`pwd`
td_info="${test_dir}/${info}"
td_expected="${test_dir}/${expected}"
if [ ! -r $td_info ]; then
echo "${test_dir}: missing file $td_info" 1>&2
exit 1
fi
if [ ! -r $td_expected ]; then
echo "${test_dir}: missing file $td_expected" 1>&2
exit 1
fi
# copy the test to a temp dir and run it
echo "${test_dir}: building..." 1>&2
rm -rf "$tmp_dir"
cp -Rp "$test_dir" "$tmp_dir"
cd "$tmp_dir"
if [ '!' -r "$build" ]; then
cp "${progdir}/etc/default-build" build
fi
if [ '!' -r "$run" ]; then
cp "${progdir}/etc/default-run" run
fi
chmod 755 "$build"
chmod 755 "$run"
export TEST_NAME=`basename ${test_dir}`
good="no"
if [ "$dev_mode" = "yes" ]; then
"./${build}" 2>&1
build_exit="$?"
echo "build exit status: $build_exit" 1>&2
if [ "$build_exit" = '0' ]; then
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" 2>&1
echo "run exit status: $?" 1>&2
good="yes"
fi
elif [ "$update_mode" = "yes" ]; then
"./${build}" >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" = '0' ]; then
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" >"$output" 2>&1
sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}"
good="yes"
else
cat "$build_output" 1>&2
echo "build exit status: $build_exit" 1>&2
fi
elif [ "$build_only" = "yes" ]; then
good="yes"
"./${build}" >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" '!=' '0' ]; then
cp "$build_output" "$output"
echo "build exit status: $build_exit" >>"$output"
diff --strip-trailing-cr -q "$expected" "$output" >/dev/null
if [ "$?" '!=' "0" ]; then
good="no"
echo "BUILD FAILED For ${TEST_NAME}"
fi
fi
exit 0
else
"./${build}" >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" = '0' ]; then
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" >"$output" 2>&1
else
cp "$build_output" "$output"
echo "build exit status: $build_exit" >>"$output"
fi
diff --strip-trailing-cr -q "$expected" "$output" >/dev/null
if [ "$?" = "0" ]; then
# output == expected
good="yes"
echo "${test_dir}: succeeded!" 1>&2
fi
fi
# Clean up test files.
if [ "$good" == "yes" ]; then
cd "$oldwd"
rm -rf "$tmp_dir"
if [ "$target_mode" = "yes" -a "$build_exit" = "0" ]; then
adb shell rm -r $DEX_LOCATION
fi
exit 0
fi
(
if [ "$update_mode" != "yes" ]; then
echo "${test_dir}: FAILED!"
echo ' '
echo '#################### info'
cat "${td_info}" | sed 's/^/# /g'
echo '#################### diffs'
diff --strip-trailing-cr -u "$expected" "$output"
echo '####################'
echo ' '
fi
echo "${TEST_NAME} files left in ${tmp_dir} on host"
if [ "$target_mode" == "yes" ]; then
echo "and in ${DEX_LOCATION} on target"
fi
) 1>&2
exit 1