| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "asm_support_mips64.S" |
| |
| #include "arch/quick_alloc_entrypoints.S" |
| |
| .set noreorder |
| .balign 16 |
| |
| /* Deliver the given exception */ |
| .extern artDeliverExceptionFromCode |
| /* Deliver an exception pending on a thread */ |
| .extern artDeliverPendingExceptionFromCode |
| |
| /* |
| * Macro that sets up $gp and stores the previous $gp value to $t8. |
| * This macro modifies v1 and t8. |
| */ |
| .macro SETUP_GP |
| move $v1, $ra |
| bal 1f |
| nop |
| 1: |
| .cpsetup $ra, $t8, 1b |
| move $ra, $v1 |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveAllCalleeSaves) |
| * callee-save: padding + $f24-$f31 + $s0-$s7 + $gp + $ra + $s8 = 19 total + 1x8 bytes padding |
| */ |
| .macro SETUP_SAVE_ALL_CALLEE_SAVES_FRAME |
| daddiu $sp, $sp, -160 |
| .cfi_adjust_cfa_offset 160 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_SAVE_ALL_CALLEE_SAVES != 160) |
| #error "FRAME_SIZE_SAVE_ALL_CALLEE_SAVES(MIPS64) size not as expected." |
| #endif |
| |
| sd $ra, 152($sp) |
| .cfi_rel_offset 31, 152 |
| sd $s8, 144($sp) |
| .cfi_rel_offset 30, 144 |
| sd $t8, 136($sp) # t8 holds caller's gp, now save it to the stack. |
| .cfi_rel_offset 28, 136 # Value from gp is pushed, so set the cfi offset accordingly. |
| sd $s7, 128($sp) |
| .cfi_rel_offset 23, 128 |
| sd $s6, 120($sp) |
| .cfi_rel_offset 22, 120 |
| sd $s5, 112($sp) |
| .cfi_rel_offset 21, 112 |
| sd $s4, 104($sp) |
| .cfi_rel_offset 20, 104 |
| sd $s3, 96($sp) |
| .cfi_rel_offset 19, 96 |
| sd $s2, 88($sp) |
| .cfi_rel_offset 18, 88 |
| sd $s1, 80($sp) |
| .cfi_rel_offset 17, 80 |
| sd $s0, 72($sp) |
| .cfi_rel_offset 16, 72 |
| |
| // FP callee-saves |
| s.d $f31, 64($sp) |
| s.d $f30, 56($sp) |
| s.d $f29, 48($sp) |
| s.d $f28, 40($sp) |
| s.d $f27, 32($sp) |
| s.d $f26, 24($sp) |
| s.d $f25, 16($sp) |
| s.d $f24, 8($sp) |
| |
| # load appropriate callee-save-method |
| ld $t1, %got(_ZN3art7Runtime9instance_E)($gp) |
| ld $t1, 0($t1) |
| ld $t1, RUNTIME_SAVE_ALL_CALLEE_SAVES_METHOD_OFFSET($t1) |
| sd $t1, 0($sp) # Place ArtMethod* at bottom of stack. |
| sd $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame. |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveRefsOnly). Restoration assumes |
| * non-moving GC. |
| * Does not include rSUSPEND or rSELF |
| * callee-save: padding + $s2-$s7 + $gp + $ra + $s8 = 9 total + 1x8 bytes padding |
| */ |
| .macro SETUP_SAVE_REFS_ONLY_FRAME |
| daddiu $sp, $sp, -80 |
| .cfi_adjust_cfa_offset 80 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_SAVE_REFS_ONLY != 80) |
| #error "FRAME_SIZE_SAVE_REFS_ONLY(MIPS64) size not as expected." |
| #endif |
| |
| sd $ra, 72($sp) |
| .cfi_rel_offset 31, 72 |
| sd $s8, 64($sp) |
| .cfi_rel_offset 30, 64 |
| sd $t8, 56($sp) # t8 holds caller's gp, now save it to the stack. |
| .cfi_rel_offset 28, 56 # Value from gp is pushed, so set the cfi offset accordingly. |
| sd $s7, 48($sp) |
| .cfi_rel_offset 23, 48 |
| sd $s6, 40($sp) |
| .cfi_rel_offset 22, 40 |
| sd $s5, 32($sp) |
| .cfi_rel_offset 21, 32 |
| sd $s4, 24($sp) |
| .cfi_rel_offset 20, 24 |
| sd $s3, 16($sp) |
| .cfi_rel_offset 19, 16 |
| sd $s2, 8($sp) |
| .cfi_rel_offset 18, 8 |
| # load appropriate callee-save-method |
| ld $t1, %got(_ZN3art7Runtime9instance_E)($gp) |
| ld $t1, 0($t1) |
| ld $t1, RUNTIME_SAVE_REFS_ONLY_METHOD_OFFSET($t1) |
| sd $t1, 0($sp) # Place Method* at bottom of stack. |
| sd $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame. |
| .endm |
| |
| .macro RESTORE_SAVE_REFS_ONLY_FRAME |
| ld $ra, 72($sp) |
| .cfi_restore 31 |
| ld $s8, 64($sp) |
| .cfi_restore 30 |
| ld $t8, 56($sp) # Restore gp back to it's temp storage. |
| .cfi_restore 28 |
| ld $s7, 48($sp) |
| .cfi_restore 23 |
| ld $s6, 40($sp) |
| .cfi_restore 22 |
| ld $s5, 32($sp) |
| .cfi_restore 21 |
| ld $s4, 24($sp) |
| .cfi_restore 20 |
| ld $s3, 16($sp) |
| .cfi_restore 19 |
| ld $s2, 8($sp) |
| .cfi_restore 18 |
| daddiu $sp, $sp, 80 |
| .cfi_adjust_cfa_offset -80 |
| .cpreturn |
| .endm |
| |
| .macro RESTORE_SAVE_REFS_ONLY_FRAME_AND_RETURN |
| ld $ra, 72($sp) |
| .cfi_restore 31 |
| ld $s8, 64($sp) |
| .cfi_restore 30 |
| ld $t8, 56($sp) # Restore gp back to it's temp storage. |
| .cfi_restore 28 |
| ld $s7, 48($sp) |
| .cfi_restore 23 |
| ld $s6, 40($sp) |
| .cfi_restore 22 |
| ld $s5, 32($sp) |
| .cfi_restore 21 |
| ld $s4, 24($sp) |
| .cfi_restore 20 |
| ld $s3, 16($sp) |
| .cfi_restore 19 |
| ld $s2, 8($sp) |
| .cfi_restore 18 |
| .cpreturn |
| jalr $zero, $ra |
| daddiu $sp, $sp, 80 |
| .cfi_adjust_cfa_offset -80 |
| .endm |
| |
| // This assumes the top part of these stack frame types are identical. |
| #define REFS_AND_ARGS_MINUS_REFS_SIZE (FRAME_SIZE_SAVE_REFS_AND_ARGS - FRAME_SIZE_SAVE_REFS_ONLY) |
| |
| .macro SETUP_SAVE_REFS_AND_ARGS_FRAME_INTERNAL |
| daddiu $sp, $sp, -208 |
| .cfi_adjust_cfa_offset 208 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_SAVE_REFS_AND_ARGS != 208) |
| #error "FRAME_SIZE_SAVE_REFS_AND_ARGS(MIPS64) size not as expected." |
| #endif |
| |
| sd $ra, 200($sp) # = kQuickCalleeSaveFrame_RefAndArgs_LrOffset |
| .cfi_rel_offset 31, 200 |
| sd $s8, 192($sp) |
| .cfi_rel_offset 30, 192 |
| sd $t8, 184($sp) # t8 holds caller's gp, now save it to the stack. |
| .cfi_rel_offset 28, 184 # Value from gp is pushed, so set the cfi offset accordingly. |
| sd $s7, 176($sp) |
| .cfi_rel_offset 23, 176 |
| sd $s6, 168($sp) |
| .cfi_rel_offset 22, 168 |
| sd $s5, 160($sp) |
| .cfi_rel_offset 21, 160 |
| sd $s4, 152($sp) |
| .cfi_rel_offset 20, 152 |
| sd $s3, 144($sp) |
| .cfi_rel_offset 19, 144 |
| sd $s2, 136($sp) |
| .cfi_rel_offset 18, 136 |
| |
| sd $a7, 128($sp) |
| .cfi_rel_offset 11, 128 |
| sd $a6, 120($sp) |
| .cfi_rel_offset 10, 120 |
| sd $a5, 112($sp) |
| .cfi_rel_offset 9, 112 |
| sd $a4, 104($sp) |
| .cfi_rel_offset 8, 104 |
| sd $a3, 96($sp) |
| .cfi_rel_offset 7, 96 |
| sd $a2, 88($sp) |
| .cfi_rel_offset 6, 88 |
| sd $a1, 80($sp) # = kQuickCalleeSaveFrame_RefAndArgs_Gpr1Offset |
| .cfi_rel_offset 5, 80 |
| |
| s.d $f19, 72($sp) |
| s.d $f18, 64($sp) |
| s.d $f17, 56($sp) |
| s.d $f16, 48($sp) |
| s.d $f15, 40($sp) |
| s.d $f14, 32($sp) |
| s.d $f13, 24($sp) # = kQuickCalleeSaveFrame_RefAndArgs_Fpr1Offset |
| s.d $f12, 16($sp) # This isn't necessary to store. |
| # 1x8 bytes padding + Method* |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveRefsAndArgs). Restoration assumes |
| * non-moving GC. |
| * callee-save: padding + $f12-$f19 + $a1-$a7 + $s2-$s7 + $gp + $ra + $s8 = 24 total + 1 words padding + Method* |
| */ |
| .macro SETUP_SAVE_REFS_AND_ARGS_FRAME |
| SETUP_SAVE_REFS_AND_ARGS_FRAME_INTERNAL |
| # load appropriate callee-save-method |
| ld $t1, %got(_ZN3art7Runtime9instance_E)($gp) |
| ld $t1, 0($t1) |
| ld $t1, RUNTIME_SAVE_REFS_AND_ARGS_METHOD_OFFSET($t1) |
| sd $t1, 0($sp) # Place Method* at bottom of stack. |
| sd $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame. |
| .endm |
| |
| .macro SETUP_SAVE_REFS_AND_ARGS_FRAME_WITH_METHOD_IN_A0 |
| SETUP_SAVE_REFS_AND_ARGS_FRAME_INTERNAL |
| sd $a0, 0($sp) # Place Method* at bottom of stack. |
| sd $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame. |
| .endm |
| |
| .macro RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| ld $ra, 200($sp) |
| .cfi_restore 31 |
| ld $s8, 192($sp) |
| .cfi_restore 30 |
| ld $t8, 184($sp) # Restore gp back to it's temp storage. |
| .cfi_restore 28 |
| ld $s7, 176($sp) |
| .cfi_restore 23 |
| ld $s6, 168($sp) |
| .cfi_restore 22 |
| ld $s5, 160($sp) |
| .cfi_restore 21 |
| ld $s4, 152($sp) |
| .cfi_restore 20 |
| ld $s3, 144($sp) |
| .cfi_restore 19 |
| ld $s2, 136($sp) |
| .cfi_restore 18 |
| |
| ld $a7, 128($sp) |
| .cfi_restore 11 |
| ld $a6, 120($sp) |
| .cfi_restore 10 |
| ld $a5, 112($sp) |
| .cfi_restore 9 |
| ld $a4, 104($sp) |
| .cfi_restore 8 |
| ld $a3, 96($sp) |
| .cfi_restore 7 |
| ld $a2, 88($sp) |
| .cfi_restore 6 |
| ld $a1, 80($sp) |
| .cfi_restore 5 |
| |
| l.d $f19, 72($sp) |
| l.d $f18, 64($sp) |
| l.d $f17, 56($sp) |
| l.d $f16, 48($sp) |
| l.d $f15, 40($sp) |
| l.d $f14, 32($sp) |
| l.d $f13, 24($sp) |
| l.d $f12, 16($sp) |
| |
| .cpreturn |
| daddiu $sp, $sp, 208 |
| .cfi_adjust_cfa_offset -208 |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveEverything). |
| * when the $sp has already been decremented by FRAME_SIZE_SAVE_EVERYTHING. |
| * callee-save: $at + $v0-$v1 + $a0-$a7 + $t0-$t3 + $s0-$s7 + $t8-$t9 + $gp + $s8 + $ra + $s8, |
| * $f0-$f31; 28(GPR)+ 32(FPR) + 1x8 bytes padding + method* |
| * This macro sets up $gp; entrypoints using it should start with ENTRY_NO_GP. |
| */ |
| .macro SETUP_SAVE_EVERYTHING_FRAME_DECREMENTED_SP |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_SAVE_EVERYTHING != 496) |
| #error "FRAME_SIZE_SAVE_EVERYTHING(MIPS64) size not as expected." |
| #endif |
| |
| // Save core registers. |
| sd $ra, 488($sp) |
| .cfi_rel_offset 31, 488 |
| sd $s8, 480($sp) |
| .cfi_rel_offset 30, 480 |
| sd $t9, 464($sp) |
| .cfi_rel_offset 25, 464 |
| sd $t8, 456($sp) |
| .cfi_rel_offset 24, 456 |
| sd $s7, 448($sp) |
| .cfi_rel_offset 23, 448 |
| sd $s6, 440($sp) |
| .cfi_rel_offset 22, 440 |
| sd $s5, 432($sp) |
| .cfi_rel_offset 21, 432 |
| sd $s4, 424($sp) |
| .cfi_rel_offset 20, 424 |
| sd $s3, 416($sp) |
| .cfi_rel_offset 19, 416 |
| sd $s2, 408($sp) |
| .cfi_rel_offset 18, 408 |
| sd $s1, 400($sp) |
| .cfi_rel_offset 17, 400 |
| sd $s0, 392($sp) |
| .cfi_rel_offset 16, 392 |
| sd $t3, 384($sp) |
| .cfi_rel_offset 15, 384 |
| sd $t2, 376($sp) |
| .cfi_rel_offset 14, 376 |
| sd $t1, 368($sp) |
| .cfi_rel_offset 13, 368 |
| sd $t0, 360($sp) |
| .cfi_rel_offset 12, 360 |
| sd $a7, 352($sp) |
| .cfi_rel_offset 11, 352 |
| sd $a6, 344($sp) |
| .cfi_rel_offset 10, 344 |
| sd $a5, 336($sp) |
| .cfi_rel_offset 9, 336 |
| sd $a4, 328($sp) |
| .cfi_rel_offset 8, 328 |
| sd $a3, 320($sp) |
| .cfi_rel_offset 7, 320 |
| sd $a2, 312($sp) |
| .cfi_rel_offset 6, 312 |
| sd $a1, 304($sp) |
| .cfi_rel_offset 5, 304 |
| sd $a0, 296($sp) |
| .cfi_rel_offset 4, 296 |
| sd $v1, 288($sp) |
| .cfi_rel_offset 3, 288 |
| sd $v0, 280($sp) |
| .cfi_rel_offset 2, 280 |
| |
| // Set up $gp, clobbering $ra and using the branch delay slot for a useful instruction. |
| bal 1f |
| .set push |
| .set noat |
| sd $at, 272($sp) |
| .cfi_rel_offset 1, 272 |
| .set pop |
| 1: |
| .cpsetup $ra, 472, 1b |
| |
| // Save FP registers. |
| s.d $f31, 264($sp) |
| s.d $f30, 256($sp) |
| s.d $f29, 248($sp) |
| s.d $f28, 240($sp) |
| s.d $f27, 232($sp) |
| s.d $f26, 224($sp) |
| s.d $f25, 216($sp) |
| s.d $f24, 208($sp) |
| s.d $f23, 200($sp) |
| s.d $f22, 192($sp) |
| s.d $f21, 184($sp) |
| s.d $f20, 176($sp) |
| s.d $f19, 168($sp) |
| s.d $f18, 160($sp) |
| s.d $f17, 152($sp) |
| s.d $f16, 144($sp) |
| s.d $f15, 136($sp) |
| s.d $f14, 128($sp) |
| s.d $f13, 120($sp) |
| s.d $f12, 112($sp) |
| s.d $f11, 104($sp) |
| s.d $f10, 96($sp) |
| s.d $f9, 88($sp) |
| s.d $f8, 80($sp) |
| s.d $f7, 72($sp) |
| s.d $f6, 64($sp) |
| s.d $f5, 56($sp) |
| s.d $f4, 48($sp) |
| s.d $f3, 40($sp) |
| s.d $f2, 32($sp) |
| s.d $f1, 24($sp) |
| s.d $f0, 16($sp) |
| |
| # load appropriate callee-save-method |
| ld $t1, %got(_ZN3art7Runtime9instance_E)($gp) |
| ld $t1, 0($t1) |
| ld $t1, RUNTIME_SAVE_EVERYTHING_METHOD_OFFSET($t1) |
| sd $t1, 0($sp) # Place ArtMethod* at bottom of stack. |
| # Place sp in Thread::Current()->top_quick_frame. |
| sd $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveEverything). |
| * callee-save: $at + $v0-$v1 + $a0-$a7 + $t0-$t3 + $s0-$s7 + $t8-$t9 + $gp + $s8 + $ra + $s8, |
| * $f0-$f31; 28(GPR)+ 32(FPR) + 1x8 bytes padding + method* |
| * This macro sets up $gp; entrypoints using it should start with ENTRY_NO_GP. |
| */ |
| .macro SETUP_SAVE_EVERYTHING_FRAME |
| daddiu $sp, $sp, -(FRAME_SIZE_SAVE_EVERYTHING) |
| .cfi_adjust_cfa_offset (FRAME_SIZE_SAVE_EVERYTHING) |
| SETUP_SAVE_EVERYTHING_FRAME_DECREMENTED_SP |
| .endm |
| |
| .macro RESTORE_SAVE_EVERYTHING_FRAME |
| // Restore FP registers. |
| l.d $f31, 264($sp) |
| l.d $f30, 256($sp) |
| l.d $f29, 248($sp) |
| l.d $f28, 240($sp) |
| l.d $f27, 232($sp) |
| l.d $f26, 224($sp) |
| l.d $f25, 216($sp) |
| l.d $f24, 208($sp) |
| l.d $f23, 200($sp) |
| l.d $f22, 192($sp) |
| l.d $f21, 184($sp) |
| l.d $f20, 176($sp) |
| l.d $f19, 168($sp) |
| l.d $f18, 160($sp) |
| l.d $f17, 152($sp) |
| l.d $f16, 144($sp) |
| l.d $f15, 136($sp) |
| l.d $f14, 128($sp) |
| l.d $f13, 120($sp) |
| l.d $f12, 112($sp) |
| l.d $f11, 104($sp) |
| l.d $f10, 96($sp) |
| l.d $f9, 88($sp) |
| l.d $f8, 80($sp) |
| l.d $f7, 72($sp) |
| l.d $f6, 64($sp) |
| l.d $f5, 56($sp) |
| l.d $f4, 48($sp) |
| l.d $f3, 40($sp) |
| l.d $f2, 32($sp) |
| l.d $f1, 24($sp) |
| l.d $f0, 16($sp) |
| |
| // Restore core registers. |
| .cpreturn |
| ld $ra, 488($sp) |
| .cfi_restore 31 |
| ld $s8, 480($sp) |
| .cfi_restore 30 |
| ld $t9, 464($sp) |
| .cfi_restore 25 |
| ld $t8, 456($sp) |
| .cfi_restore 24 |
| ld $s7, 448($sp) |
| .cfi_restore 23 |
| ld $s6, 440($sp) |
| .cfi_restore 22 |
| ld $s5, 432($sp) |
| .cfi_restore 21 |
| ld $s4, 424($sp) |
| .cfi_restore 20 |
| ld $s3, 416($sp) |
| .cfi_restore 19 |
| ld $s2, 408($sp) |
| .cfi_restore 18 |
| ld $s1, 400($sp) |
| .cfi_restore 17 |
| ld $s0, 392($sp) |
| .cfi_restore 16 |
| ld $t3, 384($sp) |
| .cfi_restore 15 |
| ld $t2, 376($sp) |
| .cfi_restore 14 |
| ld $t1, 368($sp) |
| .cfi_restore 13 |
| ld $t0, 360($sp) |
| .cfi_restore 12 |
| ld $a7, 352($sp) |
| .cfi_restore 11 |
| ld $a6, 344($sp) |
| .cfi_restore 10 |
| ld $a5, 336($sp) |
| .cfi_restore 9 |
| ld $a4, 328($sp) |
| .cfi_restore 8 |
| ld $a3, 320($sp) |
| .cfi_restore 7 |
| ld $a2, 312($sp) |
| .cfi_restore 6 |
| ld $a1, 304($sp) |
| .cfi_restore 5 |
| ld $a0, 296($sp) |
| .cfi_restore 4 |
| ld $v1, 288($sp) |
| .cfi_restore 3 |
| ld $v0, 280($sp) |
| .cfi_restore 2 |
| .set push |
| .set noat |
| ld $at, 272($sp) |
| .cfi_restore 1 |
| .set pop |
| |
| daddiu $sp, $sp, 496 |
| .cfi_adjust_cfa_offset -496 |
| .endm |
| |
| /* |
| * Macro that set calls through to artDeliverPendingExceptionFromCode, |
| * where the pending |
| * exception is Thread::Current()->exception_ |
| */ |
| .macro DELIVER_PENDING_EXCEPTION |
| SETUP_GP |
| SETUP_SAVE_ALL_CALLEE_SAVES_FRAME # save callee saves for throw |
| dla $t9, artDeliverPendingExceptionFromCode |
| jalr $zero, $t9 # artDeliverPendingExceptionFromCode(Thread*) |
| move $a0, rSELF # pass Thread::Current |
| .endm |
| |
| .macro RETURN_IF_NO_EXCEPTION |
| ld $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_ |
| RESTORE_SAVE_REFS_ONLY_FRAME |
| bne $t0, $zero, 1f # success if no exception is pending |
| nop |
| jalr $zero, $ra |
| nop |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| .endm |
| |
| .macro RETURN_IF_ZERO |
| RESTORE_SAVE_REFS_ONLY_FRAME |
| bne $v0, $zero, 1f # success? |
| nop |
| jalr $zero, $ra # return on success |
| nop |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| .endm |
| |
| .macro RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER |
| RESTORE_SAVE_REFS_ONLY_FRAME |
| beq $v0, $zero, 1f # success? |
| nop |
| jalr $zero, $ra # return on success |
| nop |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| .endm |
| |
| /* |
| * On stack replacement stub. |
| * On entry: |
| * a0 = stack to copy |
| * a1 = size of stack |
| * a2 = pc to call |
| * a3 = JValue* result |
| * a4 = shorty |
| * a5 = thread |
| */ |
| ENTRY art_quick_osr_stub |
| move $t0, $sp # save stack pointer |
| daddiu $t1, $sp, -112 # reserve stack space |
| dsrl $t1, $t1, 4 # enforce 16 byte stack alignment |
| dsll $sp, $t1, 4 # update stack pointer |
| |
| // Save callee general purpose registers, SP, T8(GP), RA, A3, and A4 (8x14 bytes) |
| sd $ra, 104($sp) |
| .cfi_rel_offset 31, 104 |
| sd $s8, 96($sp) |
| .cfi_rel_offset 30, 96 |
| sd $t0, 88($sp) # save original stack pointer stored in t0 |
| .cfi_rel_offset 29, 88 |
| sd $t8, 80($sp) # t8 holds caller's gp, now save it to the stack. |
| .cfi_rel_offset 28, 80 # Value from gp is pushed, so set the cfi offset accordingly. |
| sd $s7, 72($sp) |
| .cfi_rel_offset 23, 72 |
| sd $s6, 64($sp) |
| .cfi_rel_offset 22, 64 |
| sd $s5, 56($sp) |
| .cfi_rel_offset 21, 56 |
| sd $s4, 48($sp) |
| .cfi_rel_offset 20, 48 |
| sd $s3, 40($sp) |
| .cfi_rel_offset 19, 40 |
| sd $s2, 32($sp) |
| .cfi_rel_offset 18, 32 |
| sd $s1, 24($sp) |
| .cfi_rel_offset 17, 24 |
| sd $s0, 16($sp) |
| .cfi_rel_offset 16, 16 |
| sd $a4, 8($sp) |
| .cfi_rel_offset 8, 8 |
| sd $a3, 0($sp) |
| .cfi_rel_offset 7, 0 |
| move rSELF, $a5 # Save managed thread pointer into rSELF |
| |
| daddiu $sp, $sp, -16 |
| jal .Losr_entry |
| sd $zero, 0($sp) # Store null for ArtMethod* at bottom of frame |
| daddiu $sp, $sp, 16 |
| |
| // Restore return value address and shorty address |
| ld $a4, 8($sp) # shorty address |
| .cfi_restore 8 |
| ld $a3, 0($sp) # result value address |
| .cfi_restore 7 |
| |
| lbu $t1, 0($a4) # load return type |
| li $t2, 'D' # put char 'D' into t2 |
| beq $t1, $t2, .Losr_fp_result # branch if result type char == 'D' |
| li $t2, 'F' # put char 'F' into t2 |
| beq $t1, $t2, .Losr_fp_result # branch if result type char == 'F' |
| nop |
| b .Losr_exit |
| dsrl $v1, $v0, 32 # put high half of result in v1 |
| .Losr_fp_result: |
| mfc1 $v0, $f0 |
| mfhc1 $v1, $f0 # put high half of FP result in v1 |
| .Losr_exit: |
| sw $v0, 0($a3) # store low half of result |
| sw $v1, 4($a3) # store high half of result |
| |
| // Restore callee registers |
| ld $ra, 104($sp) |
| .cfi_restore 31 |
| ld $s8, 96($sp) |
| .cfi_restore 30 |
| ld $t0, 88($sp) # save SP into t0 for now |
| .cfi_restore 29 |
| ld $t8, 80($sp) # Restore gp back to it's temp storage. |
| .cfi_restore 28 |
| ld $s7, 72($sp) |
| .cfi_restore 23 |
| ld $s6, 64($sp) |
| .cfi_restore 22 |
| ld $s5, 56($sp) |
| .cfi_restore 21 |
| ld $s4, 48($sp) |
| .cfi_restore 20 |
| ld $s3, 40($sp) |
| .cfi_restore 19 |
| ld $s2, 32($sp) |
| .cfi_restore 18 |
| ld $s1, 24($sp) |
| .cfi_restore 17 |
| ld $s0, 16($sp) |
| .cfi_restore 16 |
| jalr $zero, $ra |
| move $sp, $t0 |
| |
| .Losr_entry: |
| dsubu $sp, $sp, $a1 # Reserve space for callee stack |
| daddiu $a1, $a1, -8 |
| daddu $t0, $a1, $sp |
| sw $ra, 0($t0) # Store low half of RA per compiler ABI |
| dsrl $t1, $ra, 32 |
| sw $t1, 4($t0) # Store high half of RA per compiler ABI |
| |
| // Copy arguments into callee stack |
| // Use simple copy routine for now. |
| // 4 bytes per slot. |
| // a0 = source address |
| // a1 = args length in bytes (does not include 8 bytes for RA) |
| // sp = destination address |
| beqz $a1, .Losr_loop_exit |
| daddiu $a1, $a1, -4 |
| daddu $t1, $a0, $a1 |
| daddu $t2, $sp, $a1 |
| .Losr_loop_entry: |
| lw $t0, 0($t1) |
| daddiu $t1, $t1, -4 |
| sw $t0, 0($t2) |
| bne $sp, $t2, .Losr_loop_entry |
| daddiu $t2, $t2, -4 |
| |
| .Losr_loop_exit: |
| move $t9, $a2 |
| jalr $zero, $t9 # Jump to the OSR entry point. |
| nop |
| END art_quick_osr_stub |
| |
| /* |
| * On entry $a0 is uint32_t* gprs_ and $a1 is uint32_t* fprs_ |
| * FIXME: just guessing about the shape of the jmpbuf. Where will pc be? |
| */ |
| ENTRY_NO_GP art_quick_do_long_jump |
| l.d $f0, 0($a1) |
| l.d $f1, 8($a1) |
| l.d $f2, 16($a1) |
| l.d $f3, 24($a1) |
| l.d $f4, 32($a1) |
| l.d $f5, 40($a1) |
| l.d $f6, 48($a1) |
| l.d $f7, 56($a1) |
| l.d $f8, 64($a1) |
| l.d $f9, 72($a1) |
| l.d $f10, 80($a1) |
| l.d $f11, 88($a1) |
| l.d $f12, 96($a1) |
| l.d $f13, 104($a1) |
| l.d $f14, 112($a1) |
| l.d $f15, 120($a1) |
| l.d $f16, 128($a1) |
| l.d $f17, 136($a1) |
| l.d $f18, 144($a1) |
| l.d $f19, 152($a1) |
| l.d $f20, 160($a1) |
| l.d $f21, 168($a1) |
| l.d $f22, 176($a1) |
| l.d $f23, 184($a1) |
| l.d $f24, 192($a1) |
| l.d $f25, 200($a1) |
| l.d $f26, 208($a1) |
| l.d $f27, 216($a1) |
| l.d $f28, 224($a1) |
| l.d $f29, 232($a1) |
| l.d $f30, 240($a1) |
| l.d $f31, 248($a1) |
| .set push |
| .set nomacro |
| .set noat |
| # no need to load zero |
| ld $at, 8($a0) |
| .set pop |
| ld $v0, 16($a0) |
| ld $v1, 24($a0) |
| # a0 has to be loaded last |
| ld $a1, 40($a0) |
| ld $a2, 48($a0) |
| ld $a3, 56($a0) |
| ld $a4, 64($a0) |
| ld $a5, 72($a0) |
| ld $a6, 80($a0) |
| ld $a7, 88($a0) |
| ld $t0, 96($a0) |
| ld $t1, 104($a0) |
| ld $t2, 112($a0) |
| ld $t3, 120($a0) |
| ld $s0, 128($a0) |
| ld $s1, 136($a0) |
| ld $s2, 144($a0) |
| ld $s3, 152($a0) |
| ld $s4, 160($a0) |
| ld $s5, 168($a0) |
| ld $s6, 176($a0) |
| ld $s7, 184($a0) |
| ld $t8, 192($a0) |
| ld $t9, 200($a0) |
| # no need to load k0, k1 |
| ld $gp, 224($a0) |
| ld $sp, 232($a0) |
| ld $s8, 240($a0) |
| ld $ra, 248($a0) |
| ld $a0, 32($a0) |
| move $v0, $zero # clear result registers v0 and v1 |
| jalr $zero, $t9 # do long jump (do not use ra, it must not be clobbered) |
| move $v1, $zero |
| END art_quick_do_long_jump |
| |
| /* |
| * Called by managed code, saves most registers (forms basis of long jump |
| * context) and passes the bottom of the stack. |
| * artDeliverExceptionFromCode will place the callee save Method* at |
| * the bottom of the thread. On entry a0 holds Throwable* |
| */ |
| ENTRY art_quick_deliver_exception |
| SETUP_SAVE_ALL_CALLEE_SAVES_FRAME |
| dla $t9, artDeliverExceptionFromCode |
| jalr $zero, $t9 # artDeliverExceptionFromCode(Throwable*, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| END art_quick_deliver_exception |
| |
| /* |
| * Called by managed code to create and deliver a NullPointerException |
| */ |
| .extern artThrowNullPointerExceptionFromCode |
| ENTRY_NO_GP art_quick_throw_null_pointer_exception |
| // Note that setting up $gp does not rely on $t9 here, so branching here directly is OK, |
| // even after clobbering any registers we don't need to preserve, such as $gp or $t0. |
| SETUP_SAVE_EVERYTHING_FRAME |
| dla $t9, artThrowNullPointerExceptionFromCode |
| jalr $zero, $t9 # artThrowNullPointerExceptionFromCode(Thread*) |
| move $a0, rSELF # pass Thread::Current |
| END art_quick_throw_null_pointer_exception |
| |
| /* |
| * Call installed by a signal handler to create and deliver a NullPointerException |
| */ |
| .extern artThrowNullPointerExceptionFromSignal |
| ENTRY_NO_GP_CUSTOM_CFA art_quick_throw_null_pointer_exception_from_signal, FRAME_SIZE_SAVE_EVERYTHING |
| SETUP_SAVE_EVERYTHING_FRAME_DECREMENTED_SP |
| # Retrieve the fault address from the padding where the signal handler stores it. |
| ld $a0, (__SIZEOF_POINTER__)($sp) |
| dla $t9, artThrowNullPointerExceptionFromSignal |
| jalr $zero, $t9 # artThrowNullPointerExceptionFromSignal(uinptr_t, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| END art_quick_throw_null_pointer_exception |
| |
| /* |
| * Called by managed code to create and deliver an ArithmeticException |
| */ |
| .extern artThrowDivZeroFromCode |
| ENTRY_NO_GP art_quick_throw_div_zero |
| SETUP_SAVE_EVERYTHING_FRAME |
| dla $t9, artThrowDivZeroFromCode |
| jalr $zero, $t9 # artThrowDivZeroFromCode(Thread*) |
| move $a0, rSELF # pass Thread::Current |
| END art_quick_throw_div_zero |
| |
| /* |
| * Called by managed code to create and deliver an |
| * ArrayIndexOutOfBoundsException |
| */ |
| .extern artThrowArrayBoundsFromCode |
| ENTRY_NO_GP art_quick_throw_array_bounds |
| // Note that setting up $gp does not rely on $t9 here, so branching here directly is OK, |
| // even after clobbering any registers we don't need to preserve, such as $gp or $t0. |
| SETUP_SAVE_EVERYTHING_FRAME |
| dla $t9, artThrowArrayBoundsFromCode |
| jalr $zero, $t9 # artThrowArrayBoundsFromCode(index, limit, Thread*) |
| move $a2, rSELF # pass Thread::Current |
| END art_quick_throw_array_bounds |
| |
| /* |
| * Called by managed code to create and deliver a StringIndexOutOfBoundsException |
| * as if thrown from a call to String.charAt(). |
| */ |
| .extern artThrowStringBoundsFromCode |
| ENTRY_NO_GP art_quick_throw_string_bounds |
| SETUP_SAVE_EVERYTHING_FRAME |
| dla $t9, artThrowStringBoundsFromCode |
| jalr $zero, $t9 # artThrowStringBoundsFromCode(index, limit, Thread*) |
| move $a2, rSELF # pass Thread::Current |
| END art_quick_throw_string_bounds |
| |
| /* |
| * Called by managed code to create and deliver a StackOverflowError. |
| */ |
| .extern artThrowStackOverflowFromCode |
| ENTRY art_quick_throw_stack_overflow |
| SETUP_SAVE_ALL_CALLEE_SAVES_FRAME |
| dla $t9, artThrowStackOverflowFromCode |
| jalr $zero, $t9 # artThrowStackOverflowFromCode(Thread*) |
| move $a0, rSELF # pass Thread::Current |
| END art_quick_throw_stack_overflow |
| |
| /* |
| * All generated callsites for interface invokes and invocation slow paths will load arguments |
| * as usual - except instead of loading arg0/$a0 with the target Method*, arg0/$a0 will contain |
| * the method_idx. This wrapper will save arg1-arg3, load the caller's Method*, align the |
| * stack and call the appropriate C helper. |
| * NOTE: "this" is first visable argument of the target, and so can be found in arg1/$a1. |
| * |
| * The helper will attempt to locate the target and return a 128-bit result in $v0/$v1 consisting |
| * of the target Method* in $v0 and method->code_ in $v1. |
| * |
| * If unsuccessful, the helper will return null/null. There will be a pending exception in the |
| * thread and we branch to another stub to deliver it. |
| * |
| * On success this wrapper will restore arguments and *jump* to the target, leaving the ra |
| * pointing back to the original caller. |
| */ |
| .macro INVOKE_TRAMPOLINE_BODY cxx_name |
| .extern \cxx_name |
| SETUP_SAVE_REFS_AND_ARGS_FRAME # save callee saves in case allocation triggers GC |
| move $a2, rSELF # pass Thread::Current |
| jal \cxx_name # (method_idx, this, Thread*, $sp) |
| move $a3, $sp # pass $sp |
| move $a0, $v0 # save target Method* |
| move $t9, $v1 # save $v0->code_ |
| RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| beq $v0, $zero, 1f |
| nop |
| jalr $zero, $t9 |
| nop |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| .endm |
| .macro INVOKE_TRAMPOLINE c_name, cxx_name |
| ENTRY \c_name |
| INVOKE_TRAMPOLINE_BODY \cxx_name |
| END \c_name |
| .endm |
| |
| INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline_with_access_check, artInvokeInterfaceTrampolineWithAccessCheck |
| |
| INVOKE_TRAMPOLINE art_quick_invoke_static_trampoline_with_access_check, artInvokeStaticTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_direct_trampoline_with_access_check, artInvokeDirectTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_super_trampoline_with_access_check, artInvokeSuperTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_virtual_trampoline_with_access_check, artInvokeVirtualTrampolineWithAccessCheck |
| |
| # On entry: |
| # t0 = shorty |
| # t1 = ptr to arg_array |
| # t2 = number of argument bytes remain |
| # v0 = ptr to stack frame where to copy arg_array |
| # This macro modifies t3, t9 and v0 |
| .macro LOOP_OVER_SHORTY_LOADING_REG gpu, fpu, label |
| lbu $t3, 0($t0) # get argument type from shorty |
| beqz $t3, \label |
| daddiu $t0, 1 |
| li $t9, 68 # put char 'D' into t9 |
| beq $t9, $t3, 1f # branch if result type char == 'D' |
| li $t9, 70 # put char 'F' into t9 |
| beq $t9, $t3, 2f # branch if result type char == 'F' |
| li $t9, 74 # put char 'J' into t9 |
| beq $t9, $t3, 3f # branch if result type char == 'J' |
| nop |
| lw $\gpu, 0($t1) |
| sw $\gpu, 0($v0) |
| daddiu $v0, 4 |
| daddiu $t1, 4 |
| b 4f |
| daddiu $t2, -4 # delay slot |
| |
| 1: # found double |
| lwu $t3, 0($t1) |
| mtc1 $t3, $\fpu |
| sw $t3, 0($v0) |
| lwu $t3, 4($t1) |
| mthc1 $t3, $\fpu |
| sw $t3, 4($v0) |
| daddiu $v0, 8 |
| daddiu $t1, 8 |
| b 4f |
| daddiu $t2, -8 # delay slot |
| |
| 2: # found float |
| lwu $t3, 0($t1) |
| mtc1 $t3, $\fpu |
| sw $t3, 0($v0) |
| daddiu $v0, 4 |
| daddiu $t1, 4 |
| b 4f |
| daddiu $t2, -4 # delay slot |
| |
| 3: # found long (8 bytes) |
| lwu $t3, 0($t1) |
| sw $t3, 0($v0) |
| lwu $t9, 4($t1) |
| sw $t9, 4($v0) |
| dsll $t9, $t9, 32 |
| or $\gpu, $t9, $t3 |
| daddiu $v0, 8 |
| daddiu $t1, 8 |
| daddiu $t2, -8 |
| 4: |
| .endm |
| |
| /* |
| * Invocation stub for quick code. |
| * On entry: |
| * a0 = method pointer |
| * a1 = argument array that must at least contain the this ptr. |
| * a2 = size of argument array in bytes |
| * a3 = (managed) thread pointer |
| * a4 = JValue* result |
| * a5 = shorty |
| */ |
| ENTRY_NO_GP art_quick_invoke_stub |
| # push a4, a5, s0(rSUSPEND), s1(rSELF), s8, ra onto the stack |
| daddiu $sp, $sp, -48 |
| .cfi_adjust_cfa_offset 48 |
| sd $ra, 40($sp) |
| .cfi_rel_offset 31, 40 |
| sd $s8, 32($sp) |
| .cfi_rel_offset 30, 32 |
| sd $s1, 24($sp) |
| .cfi_rel_offset 17, 24 |
| sd $s0, 16($sp) |
| .cfi_rel_offset 16, 16 |
| sd $a5, 8($sp) |
| .cfi_rel_offset 9, 8 |
| sd $a4, 0($sp) |
| .cfi_rel_offset 8, 0 |
| |
| daddiu $s0, $zero, SUSPEND_CHECK_INTERVAL # reset rSUSPEND to SUSPEND_CHECK_INTERVAL |
| move $s1, $a3 # move managed thread pointer into s1 (rSELF) |
| move $s8, $sp # save sp in s8 (fp) |
| |
| daddiu $t3, $a2, 24 # add 8 for ArtMethod* and 16 for stack alignment |
| dsrl $t3, $t3, 4 # shift the frame size right 4 |
| dsll $t3, $t3, 4 # shift the frame size left 4 to align to 16 bytes |
| dsubu $sp, $sp, $t3 # reserve stack space for argument array |
| |
| daddiu $t0, $a5, 1 # t0 = shorty[1] (skip 1 for return type) |
| daddiu $t1, $a1, 4 # t1 = ptr to arg_array[4] (skip this ptr) |
| daddiu $t2, $a2, -4 # t2 = number of argument bytes remain (skip this ptr) |
| daddiu $v0, $sp, 12 # v0 points to where to copy arg_array |
| LOOP_OVER_SHORTY_LOADING_REG a2, f14, call_fn |
| LOOP_OVER_SHORTY_LOADING_REG a3, f15, call_fn |
| LOOP_OVER_SHORTY_LOADING_REG a4, f16, call_fn |
| LOOP_OVER_SHORTY_LOADING_REG a5, f17, call_fn |
| LOOP_OVER_SHORTY_LOADING_REG a6, f18, call_fn |
| LOOP_OVER_SHORTY_LOADING_REG a7, f19, call_fn |
| |
| # copy arguments onto stack (t2 should be multiples of 4) |
| ble $t2, $zero, call_fn # t2 = number of argument bytes remain |
| 1: |
| lw $t3, 0($t1) # load from argument array |
| daddiu $t1, $t1, 4 |
| sw $t3, 0($v0) # save to stack |
| daddiu $t2, -4 |
| bgt $t2, $zero, 1b # t2 = number of argument bytes remain |
| daddiu $v0, $v0, 4 |
| |
| call_fn: |
| # call method (a0 and a1 have been untouched) |
| lwu $a1, 0($a1) # make a1 = this ptr |
| sw $a1, 8($sp) # copy this ptr (skip 8 bytes for ArtMethod*) |
| sd $zero, 0($sp) # store null for ArtMethod* at bottom of frame |
| ld $t9, ART_METHOD_QUICK_CODE_OFFSET_64($a0) # get pointer to the code |
| jalr $t9 # call the method |
| nop |
| move $sp, $s8 # restore sp |
| |
| # pop a4, a5, s1(rSELF), s8, ra off of the stack |
| ld $a4, 0($sp) |
| .cfi_restore 8 |
| ld $a5, 8($sp) |
| .cfi_restore 9 |
| ld $s0, 16($sp) |
| .cfi_restore 16 |
| ld $s1, 24($sp) |
| .cfi_restore 17 |
| ld $s8, 32($sp) |
| .cfi_restore 30 |
| ld $ra, 40($sp) |
| .cfi_restore 31 |
| daddiu $sp, $sp, 48 |
| .cfi_adjust_cfa_offset -48 |
| |
| # a4 = JValue* result |
| # a5 = shorty string |
| lbu $t1, 0($a5) # get result type from shorty |
| li $t2, 68 # put char 'D' into t2 |
| beq $t1, $t2, 1f # branch if result type char == 'D' |
| li $t3, 70 # put char 'F' into t3 |
| beq $t1, $t3, 1f # branch if result type char == 'F' |
| sw $v0, 0($a4) # store the result |
| dsrl $v1, $v0, 32 |
| jalr $zero, $ra |
| sw $v1, 4($a4) # store the other half of the result |
| 1: |
| mfc1 $v0, $f0 |
| mfhc1 $v1, $f0 |
| sw $v0, 0($a4) # store the result |
| jalr $zero, $ra |
| sw $v1, 4($a4) # store the other half of the result |
| END art_quick_invoke_stub |
| |
| /* |
| * Invocation static stub for quick code. |
| * On entry: |
| * a0 = method pointer |
| * a1 = argument array that must at least contain the this ptr. |
| * a2 = size of argument array in bytes |
| * a3 = (managed) thread pointer |
| * a4 = JValue* result |
| * a5 = shorty |
| */ |
| ENTRY_NO_GP art_quick_invoke_static_stub |
| |
| # push a4, a5, s0(rSUSPEND), s1(rSELF), s8, ra, onto the stack |
| daddiu $sp, $sp, -48 |
| .cfi_adjust_cfa_offset 48 |
| sd $ra, 40($sp) |
| .cfi_rel_offset 31, 40 |
| sd $s8, 32($sp) |
| .cfi_rel_offset 30, 32 |
| sd $s1, 24($sp) |
| .cfi_rel_offset 17, 24 |
| sd $s0, 16($sp) |
| .cfi_rel_offset 16, 16 |
| sd $a5, 8($sp) |
| .cfi_rel_offset 9, 8 |
| sd $a4, 0($sp) |
| .cfi_rel_offset 8, 0 |
| |
| daddiu $s0, $zero, SUSPEND_CHECK_INTERVAL # reset rSUSPEND to SUSPEND_CHECK_INTERVAL |
| move $s1, $a3 # move managed thread pointer into s1 (rSELF) |
| move $s8, $sp # save sp in s8 (fp) |
| |
| daddiu $t3, $a2, 24 # add 8 for ArtMethod* and 16 for stack alignment |
| dsrl $t3, $t3, 4 # shift the frame size right 4 |
| dsll $t3, $t3, 4 # shift the frame size left 4 to align to 16 bytes |
| dsubu $sp, $sp, $t3 # reserve stack space for argument array |
| |
| daddiu $t0, $a5, 1 # t0 = shorty[1] (skip 1 for return type) |
| move $t1, $a1 # t1 = arg_array |
| move $t2, $a2 # t2 = number of argument bytes remain |
| daddiu $v0, $sp, 8 # v0 points to where to copy arg_array |
| LOOP_OVER_SHORTY_LOADING_REG a1, f13, call_sfn |
| LOOP_OVER_SHORTY_LOADING_REG a2, f14, call_sfn |
| LOOP_OVER_SHORTY_LOADING_REG a3, f15, call_sfn |
| LOOP_OVER_SHORTY_LOADING_REG a4, f16, call_sfn |
| LOOP_OVER_SHORTY_LOADING_REG a5, f17, call_sfn |
| LOOP_OVER_SHORTY_LOADING_REG a6, f18, call_sfn |
| LOOP_OVER_SHORTY_LOADING_REG a7, f19, call_sfn |
| |
| # copy arguments onto stack (t2 should be multiples of 4) |
| ble $t2, $zero, call_sfn # t2 = number of argument bytes remain |
| 1: |
| lw $t3, 0($t1) # load from argument array |
| daddiu $t1, $t1, 4 |
| sw $t3, 0($v0) # save to stack |
| daddiu $t2, -4 |
| bgt $t2, $zero, 1b # t2 = number of argument bytes remain |
| daddiu $v0, $v0, 4 |
| |
| call_sfn: |
| # call method (a0 has been untouched) |
| sd $zero, 0($sp) # store null for ArtMethod* at bottom of frame |
| ld $t9, ART_METHOD_QUICK_CODE_OFFSET_64($a0) # get pointer to the code |
| jalr $t9 # call the method |
| nop |
| move $sp, $s8 # restore sp |
| |
| # pop a4, a5, s0(rSUSPEND), s1(rSELF), s8, ra off of the stack |
| ld $a4, 0($sp) |
| .cfi_restore 8 |
| ld $a5, 8($sp) |
| .cfi_restore 9 |
| ld $s0, 16($sp) |
| .cfi_restore 16 |
| ld $s1, 24($sp) |
| .cfi_restore 17 |
| ld $s8, 32($sp) |
| .cfi_restore 30 |
| ld $ra, 40($sp) |
| .cfi_restore 31 |
| daddiu $sp, $sp, 48 |
| .cfi_adjust_cfa_offset -48 |
| |
| # a4 = JValue* result |
| # a5 = shorty string |
| lbu $t1, 0($a5) # get result type from shorty |
| li $t2, 68 # put char 'D' into t2 |
| beq $t1, $t2, 1f # branch if result type char == 'D' |
| li $t3, 70 # put char 'F' into t3 |
| beq $t1, $t3, 1f # branch if result type char == 'F' |
| sw $v0, 0($a4) # store the result |
| dsrl $v1, $v0, 32 |
| jalr $zero, $ra |
| sw $v1, 4($a4) # store the other half of the result |
| 1: |
| mfc1 $v0, $f0 |
| mfhc1 $v1, $f0 |
| sw $v0, 0($a4) # store the result |
| jalr $zero, $ra |
| sw $v1, 4($a4) # store the other half of the result |
| END art_quick_invoke_static_stub |
| |
| /* |
| * Entry from managed code that calls artHandleFillArrayDataFromCode and |
| * delivers exception on failure. |
| */ |
| .extern artHandleFillArrayDataFromCode |
| ENTRY art_quick_handle_fill_data |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case exception allocation triggers GC |
| ld $a2, FRAME_SIZE_SAVE_REFS_ONLY($sp) # pass referrer's Method* |
| jal artHandleFillArrayDataFromCode # (payload offset, Array*, method, Thread*) |
| move $a3, rSELF # pass Thread::Current |
| RETURN_IF_ZERO |
| END art_quick_handle_fill_data |
| |
| /* |
| * Entry from managed code that calls artLockObjectFromCode, may block for GC. |
| */ |
| .extern artLockObjectFromCode |
| ENTRY_NO_GP art_quick_lock_object |
| beq $a0, $zero, art_quick_throw_null_pointer_exception |
| nop |
| .cpsetup $t9, $t8, art_quick_lock_object |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case we block |
| jal artLockObjectFromCode # (Object* obj, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| RETURN_IF_ZERO |
| END art_quick_lock_object |
| |
| ENTRY_NO_GP art_quick_lock_object_no_inline |
| beq $a0, $zero, art_quick_throw_null_pointer_exception |
| nop |
| .cpsetup $t9, $t8, art_quick_lock_object_no_inline |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case we block |
| jal artLockObjectFromCode # (Object* obj, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| RETURN_IF_ZERO |
| END art_quick_lock_object_no_inline |
| |
| /* |
| * Entry from managed code that calls artUnlockObjectFromCode and delivers exception on failure. |
| */ |
| .extern artUnlockObjectFromCode |
| ENTRY_NO_GP art_quick_unlock_object |
| beq $a0, $zero, art_quick_throw_null_pointer_exception |
| nop |
| .cpsetup $t9, $t8, art_quick_unlock_object |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case exception allocation triggers GC |
| jal artUnlockObjectFromCode # (Object* obj, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| RETURN_IF_ZERO |
| END art_quick_unlock_object |
| |
| ENTRY_NO_GP art_quick_unlock_object_no_inline |
| beq $a0, $zero, art_quick_throw_null_pointer_exception |
| nop |
| .cpsetup $t9, $t8, art_quick_unlock_object_no_inline |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case exception allocation triggers GC |
| jal artUnlockObjectFromCode # (Object* obj, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| RETURN_IF_ZERO |
| END art_quick_unlock_object_no_inline |
| |
| /* |
| * Entry from managed code that calls artInstanceOfFromCode and delivers exception on failure. |
| */ |
| .extern artInstanceOfFromCode |
| .extern artThrowClassCastExceptionForObject |
| ENTRY art_quick_check_instance_of |
| daddiu $sp, $sp, -32 |
| .cfi_adjust_cfa_offset 32 |
| sd $ra, 24($sp) |
| .cfi_rel_offset 31, 24 |
| sd $t9, 16($sp) |
| sd $a1, 8($sp) |
| sd $a0, 0($sp) |
| jal artInstanceOfFromCode |
| .cpreturn # Restore gp from t8 in branch delay slot. |
| # t8 may be clobbered in artIsAssignableFromCode. |
| beq $v0, $zero, .Lthrow_class_cast_exception |
| ld $ra, 24($sp) |
| jalr $zero, $ra |
| daddiu $sp, $sp, 32 |
| .cfi_adjust_cfa_offset -32 |
| .Lthrow_class_cast_exception: |
| ld $t9, 16($sp) |
| ld $a1, 8($sp) |
| ld $a0, 0($sp) |
| daddiu $sp, $sp, 32 |
| .cfi_adjust_cfa_offset -32 |
| SETUP_GP |
| SETUP_SAVE_ALL_CALLEE_SAVES_FRAME |
| dla $t9, artThrowClassCastExceptionForObject |
| jalr $zero, $t9 # artThrowClassCastException (Object*, Class*, Thread*) |
| move $a2, rSELF # pass Thread::Current |
| END art_quick_check_instance_of |
| |
| |
| /* |
| * Restore rReg's value from offset($sp) if rReg is not the same as rExclude. |
| * nReg is the register number for rReg. |
| */ |
| .macro POP_REG_NE rReg, nReg, offset, rExclude |
| .ifnc \rReg, \rExclude |
| ld \rReg, \offset($sp) # restore rReg |
| .cfi_restore \nReg |
| .endif |
| .endm |
| |
| /* |
| * Macro to insert read barrier, only used in art_quick_aput_obj. |
| * rObj and rDest are registers, offset is a defined literal such as MIRROR_OBJECT_CLASS_OFFSET. |
| * TODO: When read barrier has a fast path, add heap unpoisoning support for the fast path. |
| */ |
| .macro READ_BARRIER rDest, rObj, offset |
| #ifdef USE_READ_BARRIER |
| # saved registers used in art_quick_aput_obj: a0-a2, t0-t1, t9, ra. 16B-aligned. |
| daddiu $sp, $sp, -64 |
| .cfi_adjust_cfa_offset 64 |
| sd $ra, 56($sp) |
| .cfi_rel_offset 31, 56 |
| sd $t9, 48($sp) |
| .cfi_rel_offset 25, 48 |
| sd $t1, 40($sp) |
| .cfi_rel_offset 13, 40 |
| sd $t0, 32($sp) |
| .cfi_rel_offset 12, 32 |
| sd $a2, 16($sp) # padding slot at offset 24 (padding can be any slot in the 64B) |
| .cfi_rel_offset 6, 16 |
| sd $a1, 8($sp) |
| .cfi_rel_offset 5, 8 |
| sd $a0, 0($sp) |
| .cfi_rel_offset 4, 0 |
| |
| # move $a0, \rRef # pass ref in a0 (no-op for now since parameter ref is unused) |
| .ifnc \rObj, $a1 |
| move $a1, \rObj # pass rObj |
| .endif |
| daddiu $a2, $zero, \offset # pass offset |
| jal artReadBarrierSlow # artReadBarrierSlow(ref, rObj, offset) |
| .cpreturn # Restore gp from t8 in branch delay slot. |
| # t8 may be clobbered in artReadBarrierSlow. |
| # No need to unpoison return value in v0, artReadBarrierSlow() would do the unpoisoning. |
| move \rDest, $v0 # save return value in rDest |
| # (rDest cannot be v0 in art_quick_aput_obj) |
| |
| ld $a0, 0($sp) # restore registers except rDest |
| # (rDest can only be t0 or t1 in art_quick_aput_obj) |
| .cfi_restore 4 |
| ld $a1, 8($sp) |
| .cfi_restore 5 |
| ld $a2, 16($sp) |
| .cfi_restore 6 |
| POP_REG_NE $t0, 12, 32, \rDest |
| POP_REG_NE $t1, 13, 40, \rDest |
| ld $t9, 48($sp) |
| .cfi_restore 25 |
| ld $ra, 56($sp) # restore $ra |
| .cfi_restore 31 |
| daddiu $sp, $sp, 64 |
| .cfi_adjust_cfa_offset -64 |
| SETUP_GP # set up gp because we are not returning |
| #else |
| lwu \rDest, \offset(\rObj) |
| UNPOISON_HEAP_REF \rDest |
| #endif // USE_READ_BARRIER |
| .endm |
| |
| ENTRY art_quick_aput_obj |
| beq $a2, $zero, .Ldo_aput_null |
| nop |
| READ_BARRIER $t0, $a0, MIRROR_OBJECT_CLASS_OFFSET |
| READ_BARRIER $t1, $a2, MIRROR_OBJECT_CLASS_OFFSET |
| READ_BARRIER $t0, $t0, MIRROR_CLASS_COMPONENT_TYPE_OFFSET |
| bne $t1, $t0, .Lcheck_assignability # value's type == array's component type - trivial assignability |
| nop |
| .Ldo_aput: |
| dsll $a1, $a1, 2 |
| daddu $t0, $a0, $a1 |
| POISON_HEAP_REF $a2 |
| sw $a2, MIRROR_OBJECT_ARRAY_DATA_OFFSET($t0) |
| ld $t0, THREAD_CARD_TABLE_OFFSET(rSELF) |
| dsrl $t1, $a0, 7 |
| daddu $t1, $t1, $t0 |
| sb $t0, ($t1) |
| jalr $zero, $ra |
| .cpreturn # Restore gp from t8 in branch delay slot. |
| .Ldo_aput_null: |
| dsll $a1, $a1, 2 |
| daddu $t0, $a0, $a1 |
| sw $a2, MIRROR_OBJECT_ARRAY_DATA_OFFSET($t0) |
| jalr $zero, $ra |
| .cpreturn # Restore gp from t8 in branch delay slot. |
| .Lcheck_assignability: |
| daddiu $sp, $sp, -64 |
| .cfi_adjust_cfa_offset 64 |
| sd $ra, 56($sp) |
| .cfi_rel_offset 31, 56 |
| sd $t9, 24($sp) |
| sd $a2, 16($sp) |
| sd $a1, 8($sp) |
| sd $a0, 0($sp) |
| move $a1, $t1 |
| move $a0, $t0 |
| jal artIsAssignableFromCode # (Class*, Class*) |
| .cpreturn # Restore gp from t8 in branch delay slot. |
| # t8 may be clobbered in artIsAssignableFromCode. |
| ld $ra, 56($sp) |
| ld $t9, 24($sp) |
| ld $a2, 16($sp) |
| ld $a1, 8($sp) |
| ld $a0, 0($sp) |
| daddiu $sp, $sp, 64 |
| .cfi_adjust_cfa_offset -64 |
| SETUP_GP |
| bne $v0, $zero, .Ldo_aput |
| nop |
| SETUP_SAVE_ALL_CALLEE_SAVES_FRAME |
| move $a1, $a2 |
| dla $t9, artThrowArrayStoreException |
| jalr $zero, $t9 # artThrowArrayStoreException(Class*, Class*, Thread*) |
| move $a2, rSELF # pass Thread::Current |
| END art_quick_aput_obj |
| |
| // Macros taking opportunity of code similarities for downcalls. |
| .macro ONE_ARG_REF_DOWNCALL name, entrypoint, return, extend=0 |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| dla $t9, \entrypoint |
| jalr $t9 # (field_idx, Thread*) |
| move $a1, rSELF # pass Thread::Current |
| .if \extend |
| sll $v0, $v0, 0 # sign-extend 32-bit result |
| .endif |
| \return # RETURN_IF_NO_EXCEPTION or RETURN_IF_ZERO |
| END \name |
| .endm |
| |
| .macro TWO_ARG_REF_DOWNCALL name, entrypoint, return, extend=0 |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| dla $t9, \entrypoint |
| jalr $t9 # (field_idx, Object*, Thread*) or |
| # (field_idx, new_val, Thread*) |
| move $a2, rSELF # pass Thread::Current |
| .if \extend |
| sll $v0, $v0, 0 # sign-extend 32-bit result |
| .endif |
| \return # RETURN_IF_NO_EXCEPTION or RETURN_IF_ZERO |
| END \name |
| .endm |
| |
| .macro THREE_ARG_REF_DOWNCALL name, entrypoint, return, extend=0 |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| dla $t9, \entrypoint |
| jalr $t9 # (field_idx, Object*, new_val, Thread*) |
| move $a3, rSELF # pass Thread::Current |
| .if \extend |
| sll $v0, $v0, 0 # sign-extend 32-bit result |
| .endif |
| \return # RETURN_IF_NO_EXCEPTION or RETURN_IF_ZERO |
| END \name |
| .endm |
| |
| /* |
| * Called by managed code to resolve a static/instance field and load/store a value. |
| */ |
| ONE_ARG_REF_DOWNCALL art_quick_get_byte_static, artGetByteStaticFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| ONE_ARG_REF_DOWNCALL art_quick_get_boolean_static, artGetBooleanStaticFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| ONE_ARG_REF_DOWNCALL art_quick_get_short_static, artGetShortStaticFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| ONE_ARG_REF_DOWNCALL art_quick_get_char_static, artGetCharStaticFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| ONE_ARG_REF_DOWNCALL art_quick_get32_static, artGet32StaticFromCompiledCode, RETURN_IF_NO_EXCEPTION, 1 |
| ONE_ARG_REF_DOWNCALL art_quick_get_obj_static, artGetObjStaticFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| ONE_ARG_REF_DOWNCALL art_quick_get64_static, artGet64StaticFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_get_byte_instance, artGetByteInstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_get_boolean_instance, artGetBooleanInstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_get_short_instance, artGetShortInstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_get_char_instance, artGetCharInstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_get32_instance, artGet32InstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION, 1 |
| TWO_ARG_REF_DOWNCALL art_quick_get_obj_instance, artGetObjInstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_get64_instance, artGet64InstanceFromCompiledCode, RETURN_IF_NO_EXCEPTION |
| TWO_ARG_REF_DOWNCALL art_quick_set8_static, artSet8StaticFromCompiledCode, RETURN_IF_ZERO |
| TWO_ARG_REF_DOWNCALL art_quick_set16_static, artSet16StaticFromCompiledCode, RETURN_IF_ZERO |
| TWO_ARG_REF_DOWNCALL art_quick_set32_static, artSet32StaticFromCompiledCode, RETURN_IF_ZERO |
| TWO_ARG_REF_DOWNCALL art_quick_set_obj_static, artSetObjStaticFromCompiledCode, RETURN_IF_ZERO |
| TWO_ARG_REF_DOWNCALL art_quick_set64_static, artSet64StaticFromCompiledCode, RETURN_IF_ZERO |
| THREE_ARG_REF_DOWNCALL art_quick_set8_instance, artSet8InstanceFromCompiledCode, RETURN_IF_ZERO |
| THREE_ARG_REF_DOWNCALL art_quick_set16_instance, artSet16InstanceFromCompiledCode, RETURN_IF_ZERO |
| THREE_ARG_REF_DOWNCALL art_quick_set32_instance, artSet32InstanceFromCompiledCode, RETURN_IF_ZERO |
| THREE_ARG_REF_DOWNCALL art_quick_set_obj_instance, artSetObjInstanceFromCompiledCode, RETURN_IF_ZERO |
| THREE_ARG_REF_DOWNCALL art_quick_set64_instance, artSet64InstanceFromCompiledCode, RETURN_IF_ZERO |
| |
| // Macro to facilitate adding new allocation entrypoints. |
| .macro ONE_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| jal \entrypoint |
| move $a1, rSELF # pass Thread::Current |
| \return |
| END \name |
| .endm |
| |
| // Macro to facilitate adding new allocation entrypoints. |
| .macro TWO_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| jal \entrypoint |
| move $a2, rSELF # pass Thread::Current |
| \return |
| END \name |
| .endm |
| |
| .macro THREE_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| jal \entrypoint |
| move $a3, rSELF # pass Thread::Current |
| \return |
| END \name |
| .endm |
| |
| .macro FOUR_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_SAVE_REFS_ONLY_FRAME # save callee saves in case of GC |
| jal \entrypoint |
| move $a4, rSELF # pass Thread::Current |
| \return |
| END \name |
| .endm |
| |
| // Generate the allocation entrypoints for each allocator. |
| GENERATE_ALLOC_ENTRYPOINTS_FOR_EACH_ALLOCATOR |
| |
| GENERATE_ALLOC_ENTRYPOINTS_ALLOC_OBJECT_RESOLVED(_rosalloc, RosAlloc) |
| GENERATE_ALLOC_ENTRYPOINTS_ALLOC_OBJECT_RESOLVED(_tlab, TLAB) |
| GENERATE_ALLOC_ENTRYPOINTS_ALLOC_OBJECT_RESOLVED(_region_tlab, RegionTLAB) |
| |
| /* |
| * Entry from managed code to resolve a string, this stub will allocate a String and deliver an |
| * exception on error. On success the String is returned. A0 holds the string index. The fast |
| * path check for hit in strings cache has already been performed. |
| */ |
| ONE_ARG_DOWNCALL art_quick_resolve_string, artResolveStringFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER |
| |
| /* |
| * Entry from managed code when uninitialized static storage, this stub will run the class |
| * initializer and deliver the exception on error. On success the static storage base is |
| * returned. |
| */ |
| ONE_ARG_DOWNCALL art_quick_initialize_static_storage, artInitializeStaticStorageFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER |
| |
| /* |
| * Entry from managed code when dex cache misses for a type_idx. |
| */ |
| ONE_ARG_DOWNCALL art_quick_initialize_type, artInitializeTypeFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER |
| |
| /* |
| * Entry from managed code when type_idx needs to be checked for access and dex cache may also |
| * miss. |
| */ |
| ONE_ARG_DOWNCALL art_quick_initialize_type_and_verify_access, artInitializeTypeAndVerifyAccessFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER |
| |
| /* |
| * Called by managed code when the value in rSUSPEND has been decremented to 0. |
| */ |
| .extern artTestSuspendFromCode |
| ENTRY_NO_GP art_quick_test_suspend |
| lh rSUSPEND, THREAD_FLAGS_OFFSET(rSELF) |
| bne rSUSPEND, $zero, 1f |
| daddiu rSUSPEND, $zero, SUSPEND_CHECK_INTERVAL # reset rSUSPEND to SUSPEND_CHECK_INTERVAL |
| jalr $zero, $ra |
| nop |
| 1: |
| SETUP_SAVE_EVERYTHING_FRAME # save everything for stack crawl |
| jal artTestSuspendFromCode # (Thread*) |
| move $a0, rSELF |
| RESTORE_SAVE_EVERYTHING_FRAME |
| jalr $zero, $ra |
| nop |
| END art_quick_test_suspend |
| |
| /* |
| * Called by managed code that is attempting to call a method on a proxy class. On entry |
| * r0 holds the proxy method; r1, r2 and r3 may contain arguments. |
| */ |
| .extern artQuickProxyInvokeHandler |
| ENTRY art_quick_proxy_invoke_handler |
| SETUP_SAVE_REFS_AND_ARGS_FRAME_WITH_METHOD_IN_A0 |
| move $a2, rSELF # pass Thread::Current |
| jal artQuickProxyInvokeHandler # (Method* proxy method, receiver, Thread*, SP) |
| move $a3, $sp # pass $sp |
| ld $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_ |
| daddiu $sp, $sp, REFS_AND_ARGS_MINUS_REFS_SIZE # skip a0-a7 and f12-f19 |
| RESTORE_SAVE_REFS_ONLY_FRAME |
| bne $t0, $zero, 1f |
| dmtc1 $v0, $f0 # place return value to FP return value |
| jalr $zero, $ra |
| dmtc1 $v1, $f1 # place return value to FP return value |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_proxy_invoke_handler |
| |
| /* |
| * Called to resolve an imt conflict. |
| * a0 is the conflict ArtMethod. |
| * t0 is a hidden argument that holds the target interface method's dex method index. |
| * |
| * Mote that this stub writes to a0, t0 and t1. |
| */ |
| ENTRY art_quick_imt_conflict_trampoline |
| ld $t1, 0($sp) # Load referrer. |
| ld $t1, ART_METHOD_DEX_CACHE_METHODS_OFFSET_64($t1) # Load dex cache methods array. |
| dsll $t0, $t0, POINTER_SIZE_SHIFT # Calculate offset. |
| daddu $t0, $t1, $t0 # Add offset to base. |
| ld $t0, 0($t0) # Load interface method. |
| ld $a0, ART_METHOD_JNI_OFFSET_64($a0) # Load ImtConflictTable. |
| |
| .Limt_table_iterate: |
| ld $t1, 0($a0) # Load next entry in ImtConflictTable. |
| # Branch if found. |
| beq $t1, $t0, .Limt_table_found |
| nop |
| # If the entry is null, the interface method is not in the ImtConflictTable. |
| beqzc $t1, .Lconflict_trampoline |
| # Iterate over the entries of the ImtConflictTable. |
| daddiu $a0, $a0, 2 * __SIZEOF_POINTER__ # Iterate to the next entry. |
| bc .Limt_table_iterate |
| |
| .Limt_table_found: |
| # We successfully hit an entry in the table. Load the target method and jump to it. |
| ld $a0, __SIZEOF_POINTER__($a0) |
| ld $t9, ART_METHOD_QUICK_CODE_OFFSET_64($a0) |
| jr $t9 |
| .cpreturn # Restore gp from t8 in branch delay slot. |
| |
| .Lconflict_trampoline: |
| # Call the runtime stub to populate the ImtConflictTable and jump to the resolved method. |
| INVOKE_TRAMPOLINE_BODY artInvokeInterfaceTrampoline |
| END art_quick_imt_conflict_trampoline |
| |
| .extern artQuickResolutionTrampoline |
| ENTRY art_quick_resolution_trampoline |
| SETUP_SAVE_REFS_AND_ARGS_FRAME |
| move $a2, rSELF # pass Thread::Current |
| jal artQuickResolutionTrampoline # (Method* called, receiver, Thread*, SP) |
| move $a3, $sp # pass $sp |
| beq $v0, $zero, 1f |
| ld $a0, 0($sp) # load resolved method in $a0 |
| # artQuickResolutionTrampoline puts resolved method in *SP |
| RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| move $t9, $v0 # code pointer must be in $t9 to generate the global pointer |
| jalr $zero, $t9 # tail call to method |
| nop |
| 1: |
| RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_resolution_trampoline |
| |
| .extern artQuickGenericJniTrampoline |
| .extern artQuickGenericJniEndTrampoline |
| ENTRY art_quick_generic_jni_trampoline |
| SETUP_SAVE_REFS_AND_ARGS_FRAME_WITH_METHOD_IN_A0 |
| move $s8, $sp # save $sp |
| |
| # prepare for call to artQuickGenericJniTrampoline(Thread*, SP) |
| move $a0, rSELF # pass Thread::Current |
| move $a1, $sp # pass $sp |
| jal artQuickGenericJniTrampoline # (Thread*, SP) |
| daddiu $sp, $sp, -5120 # reserve space on the stack |
| |
| # The C call will have registered the complete save-frame on success. |
| # The result of the call is: |
| # v0: ptr to native code, 0 on error. |
| # v1: ptr to the bottom of the used area of the alloca, can restore stack till here. |
| beq $v0, $zero, 1f # check entry error |
| move $t9, $v0 # save the code ptr |
| move $sp, $v1 # release part of the alloca |
| |
| # Load parameters from stack into registers |
| ld $a0, 0($sp) |
| ld $a1, 8($sp) |
| ld $a2, 16($sp) |
| ld $a3, 24($sp) |
| ld $a4, 32($sp) |
| ld $a5, 40($sp) |
| ld $a6, 48($sp) |
| ld $a7, 56($sp) |
| # Load FPRs the same as GPRs. Look at BuildNativeCallFrameStateMachine. |
| l.d $f12, 0($sp) |
| l.d $f13, 8($sp) |
| l.d $f14, 16($sp) |
| l.d $f15, 24($sp) |
| l.d $f16, 32($sp) |
| l.d $f17, 40($sp) |
| l.d $f18, 48($sp) |
| l.d $f19, 56($sp) |
| jalr $t9 # native call |
| daddiu $sp, $sp, 64 |
| |
| # result sign extension is handled in C code |
| # prepare for call to artQuickGenericJniEndTrampoline(Thread*, result, result_f) |
| move $a0, rSELF # pass Thread::Current |
| move $a1, $v0 |
| jal artQuickGenericJniEndTrampoline |
| dmfc1 $a2, $f0 |
| |
| ld $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_ |
| bne $t0, $zero, 1f # check for pending exceptions |
| move $sp, $s8 # tear down the alloca |
| |
| # tear dpown the callee-save frame |
| RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| |
| jalr $zero, $ra |
| dmtc1 $v0, $f0 # place return value to FP return value |
| |
| 1: |
| ld $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) |
| # This will create a new save-all frame, required by the runtime. |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_generic_jni_trampoline |
| |
| .extern artQuickToInterpreterBridge |
| ENTRY art_quick_to_interpreter_bridge |
| SETUP_SAVE_REFS_AND_ARGS_FRAME |
| move $a1, rSELF # pass Thread::Current |
| jal artQuickToInterpreterBridge # (Method* method, Thread*, SP) |
| move $a2, $sp # pass $sp |
| ld $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_ |
| daddiu $sp, $sp, REFS_AND_ARGS_MINUS_REFS_SIZE # skip a0-a7 and f12-f19 |
| RESTORE_SAVE_REFS_ONLY_FRAME |
| bne $t0, $zero, 1f |
| dmtc1 $v0, $f0 # place return value to FP return value |
| jalr $zero, $ra |
| dmtc1 $v1, $f1 # place return value to FP return value |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_to_interpreter_bridge |
| |
| /* |
| * Routine that intercepts method calls and returns. |
| */ |
| .extern artInstrumentationMethodEntryFromCode |
| .extern artInstrumentationMethodExitFromCode |
| ENTRY art_quick_instrumentation_entry |
| SETUP_SAVE_REFS_AND_ARGS_FRAME |
| daddiu $sp, $sp, -16 # space for saving arg0 |
| .cfi_adjust_cfa_offset 16 |
| sd $a0, 0($sp) # save arg0 |
| move $a3, $ra # pass $ra |
| jal artInstrumentationMethodEntryFromCode # (Method*, Object*, Thread*, RA) |
| move $a2, rSELF # pass Thread::Current |
| move $t9, $v0 # $t9 holds reference to code |
| ld $a0, 0($sp) # restore arg0 |
| daddiu $sp, $sp, 16 # remove args |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| jalr $t9 # call method |
| nop |
| END art_quick_instrumentation_entry |
| /* intentional fallthrough */ |
| .global art_quick_instrumentation_exit |
| art_quick_instrumentation_exit: |
| .cfi_startproc |
| SETUP_GP |
| move $ra, $zero # link register is to here, so clobber with 0 for later checks |
| SETUP_SAVE_REFS_ONLY_FRAME |
| move $t0, $sp # remember bottom of caller's frame |
| daddiu $sp, $sp, -16 # save return values and set up args |
| .cfi_adjust_cfa_offset 16 |
| sd $v0, 0($sp) |
| .cfi_rel_offset 2, 0 |
| s.d $f0, 8($sp) |
| mov.d $f15, $f0 # pass fpr result |
| move $a2, $v0 # pass gpr result |
| move $a1, $t0 # pass $sp |
| move $a0, rSELF # pass Thread::Current |
| jal artInstrumentationMethodExitFromCode # (Thread*, SP, gpr_res, fpr_res) |
| .cpreturn # Restore gp from t8 in branch delay slot. gp is not used anymore, |
| # and t8 may be clobbered in artInstrumentationMethodExitFromCode. |
| |
| move $t9, $v0 # set aside returned link register |
| move $ra, $v1 # set link register for deoptimization |
| ld $v0, 0($sp) # restore return values |
| l.d $f0, 8($sp) |
| jalr $zero, $t9 # return |
| # restore stack, 16 bytes of saved values + ref_only callee save frame |
| daddiu $sp, $sp, 16+FRAME_SIZE_SAVE_REFS_ONLY |
| .cfi_adjust_cfa_offset -(16+FRAME_SIZE_SAVE_REFS_ONLY) |
| END art_quick_instrumentation_exit |
| |
| /* |
| * Instrumentation has requested that we deoptimize into the interpreter. The deoptimization |
| * will long jump to the upcall with a special exception of -1. |
| */ |
| .extern artDeoptimize |
| .extern artEnterInterpreterFromDeoptimize |
| ENTRY art_quick_deoptimize |
| SETUP_SAVE_ALL_CALLEE_SAVES_FRAME |
| jal artDeoptimize # artDeoptimize(Thread*, SP) |
| # Returns caller method's frame size. |
| move $a0, rSELF # pass Thread::current |
| END art_quick_deoptimize |
| |
| /* |
| * Compiled code has requested that we deoptimize into the interpreter. The deoptimization |
| * will long jump to the upcall with a special exception of -1. |
| */ |
| .extern artDeoptimizeFromCompiledCode |
| ENTRY_NO_GP art_quick_deoptimize_from_compiled_code |
| SETUP_SAVE_EVERYTHING_FRAME |
| jal artDeoptimizeFromCompiledCode # artDeoptimizeFromCompiledCode(Thread*, SP) |
| # Returns caller method's frame size. |
| move $a0, rSELF # pass Thread::current |
| END art_quick_deoptimize_from_compiled_code |
| |
| .set push |
| .set noat |
| /* java.lang.String.compareTo(String anotherString) */ |
| ENTRY_NO_GP art_quick_string_compareto |
| /* $a0 holds address of "this" */ |
| /* $a1 holds address of "anotherString" */ |
| beq $a0,$a1,9f # this and anotherString are the same object |
| move $v0,$zero |
| |
| lw $a2,MIRROR_STRING_COUNT_OFFSET($a0) # this.length() |
| lw $a3,MIRROR_STRING_COUNT_OFFSET($a1) # anotherString.length() |
| MINu $t2, $a2, $a3 |
| # $t2 now holds min(this.length(),anotherString.length()) |
| |
| beqz $t2,9f # while min(this.length(),anotherString.length())-i != 0 |
| subu $v0,$a2,$a3 # if $t2==0 return |
| # (this.length() - anotherString.length()) |
| 1: |
| lhu $t0,MIRROR_STRING_VALUE_OFFSET($a0) # while this.charAt(i) == anotherString.charAt(i) |
| lhu $t1,MIRROR_STRING_VALUE_OFFSET($a1) |
| bne $t0,$t1,9f # if this.charAt(i) != anotherString.charAt(i) |
| subu $v0,$t0,$t1 # return (this.charAt(i) - anotherString.charAt(i)) |
| daddiu $a0,$a0,2 # point at this.charAt(i++) |
| subu $t2,$t2,1 # new value of |
| # min(this.length(),anotherString.length())-i |
| bnez $t2,1b |
| daddiu $a1,$a1,2 # point at anotherString.charAt(i++) |
| subu $v0,$a2,$a3 |
| |
| 9: |
| j $ra |
| nop |
| END art_quick_string_compareto |
| |
| /* java.lang.String.indexOf(int ch, int fromIndex=0) */ |
| ENTRY_NO_GP art_quick_indexof |
| /* $a0 holds address of "this" */ |
| /* $a1 holds "ch" */ |
| /* $a2 holds "fromIndex" */ |
| lw $t0,MIRROR_STRING_COUNT_OFFSET($a0) # this.length() |
| slt $at, $a2, $zero # if fromIndex < 0 |
| seleqz $a2, $a2, $at # fromIndex = 0; |
| subu $t0,$t0,$a2 # this.length() - fromIndex |
| blez $t0,6f # if this.length()-fromIndex <= 0 |
| li $v0,-1 # return -1; |
| |
| sll $v0,$a2,1 # $a0 += $a2 * 2 |
| daddu $a0,$a0,$v0 # " ditto " |
| move $v0,$a2 # Set i to fromIndex. |
| |
| 1: |
| lhu $t3,MIRROR_STRING_VALUE_OFFSET($a0) # if this.charAt(i) == ch |
| beq $t3,$a1,6f # return i; |
| daddu $a0,$a0,2 # i++ |
| subu $t0,$t0,1 # this.length() - i |
| bnez $t0,1b # while this.length() - i > 0 |
| addu $v0,$v0,1 # i++ |
| |
| li $v0,-1 # if this.length() - i <= 0 |
| # return -1; |
| |
| 6: |
| j $ra |
| nop |
| END art_quick_indexof |
| |
| .extern artInvokePolymorphic |
| ENTRY art_quick_invoke_polymorphic |
| SETUP_SAVE_REFS_AND_ARGS_FRAME |
| move $a2, rSELF # Make $a2 an alias for the current Thread. |
| move $a3, $sp # Make $a3 a pointer to the saved frame context. |
| daddiu $sp, $sp, -8 # Reserve space for JValue result. |
| .cfi_adjust_cfa_offset 8 |
| sd $zero, 0($sp) # Initialize JValue result. |
| jal artInvokePolymorphic # (result, receiver, Thread*, context) |
| move $a0, $sp # Make $a0 a pointer to the JValue result |
| .macro MATCH_RETURN_TYPE c, handler |
| li $t0, \c |
| beq $v0, $t0, \handler |
| .endm |
| MATCH_RETURN_TYPE 'V', .Lcleanup_and_return |
| MATCH_RETURN_TYPE 'L', .Lstore_ref_result |
| MATCH_RETURN_TYPE 'I', .Lstore_long_result |
| MATCH_RETURN_TYPE 'J', .Lstore_long_result |
| MATCH_RETURN_TYPE 'B', .Lstore_long_result |
| MATCH_RETURN_TYPE 'C', .Lstore_char_result |
| MATCH_RETURN_TYPE 'D', .Lstore_double_result |
| MATCH_RETURN_TYPE 'F', .Lstore_float_result |
| MATCH_RETURN_TYPE 'S', .Lstore_long_result |
| MATCH_RETURN_TYPE 'Z', .Lstore_boolean_result |
| .purgem MATCH_RETURN_TYPE |
| nop |
| b .Lcleanup_and_return |
| nop |
| .Lstore_boolean_result: |
| b .Lcleanup_and_return |
| lbu $v0, 0($sp) # Move byte from JValue result to return value register. |
| .Lstore_char_result: |
| b .Lcleanup_and_return |
| lhu $v0, 0($sp) # Move char from JValue result to return value register. |
| .Lstore_double_result: |
| .Lstore_float_result: |
| b .Lcleanup_and_return |
| l.d $f0, 0($sp) # Move double/float from JValue result to return value register. |
| .Lstore_ref_result: |
| b .Lcleanup_and_return |
| lwu $v0, 0($sp) # Move zero extended lower 32-bits to return value register. |
| .Lstore_long_result: |
| ld $v0, 0($sp) # Move long from JValue result to return value register. |
| // Fall-through to clean up and return. |
| .Lcleanup_and_return: |
| daddiu $sp, $sp, 8 # Remove space for JValue result. |
| .cfi_adjust_cfa_offset -8 |
| ld $t0, THREAD_EXCEPTION_OFFSET(rSELF) # Load Thread::Current()->exception_ |
| RESTORE_SAVE_REFS_AND_ARGS_FRAME |
| bnez $t0, 1f # Success if no exception is pending. |
| nop |
| jalr $zero, $ra |
| nop |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_invoke_polymorphic |
| |
| .set pop |
