| /* | |
| * Copyright (C) 2012 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include <gtest/gtest.h> | |
| #include <errno.h> | |
| #include <limits.h> | |
| #include <pthread.h> | |
| #include <unistd.h> | |
| TEST(pthread, pthread_key_create) { | |
| pthread_key_t key; | |
| ASSERT_EQ(0, pthread_key_create(&key, NULL)); | |
| ASSERT_EQ(0, pthread_key_delete(key)); | |
| // Can't delete a key that's already been deleted. | |
| ASSERT_EQ(EINVAL, pthread_key_delete(key)); | |
| } | |
| #if !defined(__GLIBC__) // glibc uses keys internally that its sysconf value doesn't account for. | |
| TEST(pthread, pthread_key_create_lots) { | |
| // We can allocate _SC_THREAD_KEYS_MAX keys. | |
| std::vector<pthread_key_t> keys; | |
| for (int i = 0; i < sysconf(_SC_THREAD_KEYS_MAX); ++i) { | |
| pthread_key_t key; | |
| // If this fails, it's likely that GLOBAL_INIT_THREAD_LOCAL_BUFFER_COUNT is wrong. | |
| ASSERT_EQ(0, pthread_key_create(&key, NULL)) << i << " of " << sysconf(_SC_THREAD_KEYS_MAX); | |
| keys.push_back(key); | |
| } | |
| // ...and that really is the maximum. | |
| pthread_key_t key; | |
| ASSERT_EQ(EAGAIN, pthread_key_create(&key, NULL)); | |
| // (Don't leak all those keys!) | |
| for (size_t i = 0; i < keys.size(); ++i) { | |
| ASSERT_EQ(0, pthread_key_delete(keys[i])); | |
| } | |
| } | |
| #endif | |
| static void* IdFn(void* arg) { | |
| return arg; | |
| } | |
| static void* SleepFn(void* arg) { | |
| sleep(reinterpret_cast<unsigned int>(arg)); | |
| return NULL; | |
| } | |
| static void* SpinFn(void* arg) { | |
| volatile bool* b = reinterpret_cast<volatile bool*>(arg); | |
| while (!*b) { | |
| } | |
| return NULL; | |
| } | |
| static void* JoinFn(void* arg) { | |
| return reinterpret_cast<void*>(pthread_join(reinterpret_cast<pthread_t>(arg), NULL)); | |
| } | |
| static void AssertDetached(pthread_t t, bool is_detached) { | |
| pthread_attr_t attr; | |
| ASSERT_EQ(0, pthread_getattr_np(t, &attr)); | |
| int detach_state; | |
| ASSERT_EQ(0, pthread_attr_getdetachstate(&attr, &detach_state)); | |
| pthread_attr_destroy(&attr); | |
| ASSERT_EQ(is_detached, (detach_state == PTHREAD_CREATE_DETACHED)); | |
| } | |
| static void MakeDeadThread(pthread_t& t) { | |
| ASSERT_EQ(0, pthread_create(&t, NULL, IdFn, NULL)); | |
| void* result; | |
| ASSERT_EQ(0, pthread_join(t, &result)); | |
| } | |
| TEST(pthread, pthread_create) { | |
| void* expected_result = reinterpret_cast<void*>(123); | |
| // Can we create a thread? | |
| pthread_t t; | |
| ASSERT_EQ(0, pthread_create(&t, NULL, IdFn, expected_result)); | |
| // If we join, do we get the expected value back? | |
| void* result; | |
| ASSERT_EQ(0, pthread_join(t, &result)); | |
| ASSERT_EQ(expected_result, result); | |
| } | |
| TEST(pthread, pthread_create_EAGAIN) { | |
| pthread_attr_t attributes; | |
| ASSERT_EQ(0, pthread_attr_init(&attributes)); | |
| ASSERT_EQ(0, pthread_attr_setstacksize(&attributes, static_cast<size_t>(-1) & ~(getpagesize() - 1))); | |
| pthread_t t; | |
| ASSERT_EQ(EAGAIN, pthread_create(&t, &attributes, IdFn, NULL)); | |
| } | |
| TEST(pthread, pthread_no_join_after_detach) { | |
| pthread_t t1; | |
| ASSERT_EQ(0, pthread_create(&t1, NULL, SleepFn, reinterpret_cast<void*>(5))); | |
| // After a pthread_detach... | |
| ASSERT_EQ(0, pthread_detach(t1)); | |
| AssertDetached(t1, true); | |
| // ...pthread_join should fail. | |
| void* result; | |
| ASSERT_EQ(EINVAL, pthread_join(t1, &result)); | |
| } | |
| TEST(pthread, pthread_no_op_detach_after_join) { | |
| bool done = false; | |
| pthread_t t1; | |
| ASSERT_EQ(0, pthread_create(&t1, NULL, SpinFn, &done)); | |
| // If thread 2 is already waiting to join thread 1... | |
| pthread_t t2; | |
| ASSERT_EQ(0, pthread_create(&t2, NULL, JoinFn, reinterpret_cast<void*>(t1))); | |
| sleep(1); // (Give t2 a chance to call pthread_join.) | |
| // ...a call to pthread_detach on thread 1 will "succeed" (silently fail)... | |
| ASSERT_EQ(0, pthread_detach(t1)); | |
| AssertDetached(t1, false); | |
| done = true; | |
| // ...but t2's join on t1 still goes ahead (which we can tell because our join on t2 finishes). | |
| void* join_result; | |
| ASSERT_EQ(0, pthread_join(t2, &join_result)); | |
| ASSERT_EQ(0, reinterpret_cast<int>(join_result)); | |
| } | |
| TEST(pthread, pthread_join_self) { | |
| void* result; | |
| ASSERT_EQ(EDEADLK, pthread_join(pthread_self(), &result)); | |
| } | |
| #if __BIONIC__ // For some reason, gtest on bionic can cope with this but gtest on glibc can't. | |
| static void TestBug37410() { | |
| pthread_t t1; | |
| ASSERT_EQ(0, pthread_create(&t1, NULL, JoinFn, reinterpret_cast<void*>(pthread_self()))); | |
| pthread_exit(NULL); | |
| } | |
| // Even though this isn't really a death test, we have to say "DeathTest" here so gtest knows to | |
| // run this test (which exits normally) in its own process. | |
| TEST(pthread_DeathTest, pthread_bug_37410) { | |
| // http://code.google.com/p/android/issues/detail?id=37410 | |
| ::testing::FLAGS_gtest_death_test_style = "threadsafe"; | |
| ASSERT_EXIT(TestBug37410(), ::testing::ExitedWithCode(0), ""); | |
| } | |
| #endif | |
| static void* SignalHandlerFn(void* arg) { | |
| sigset_t wait_set; | |
| sigfillset(&wait_set); | |
| return reinterpret_cast<void*>(sigwait(&wait_set, reinterpret_cast<int*>(arg))); | |
| } | |
| TEST(pthread, pthread_sigmask) { | |
| // Block SIGUSR1. | |
| sigset_t set; | |
| sigemptyset(&set); | |
| sigaddset(&set, SIGUSR1); | |
| ASSERT_EQ(0, pthread_sigmask(SIG_BLOCK, &set, NULL)); | |
| // Spawn a thread that calls sigwait and tells us what it received. | |
| pthread_t signal_thread; | |
| int received_signal = -1; | |
| ASSERT_EQ(0, pthread_create(&signal_thread, NULL, SignalHandlerFn, &received_signal)); | |
| // Send that thread SIGUSR1. | |
| pthread_kill(signal_thread, SIGUSR1); | |
| // See what it got. | |
| void* join_result; | |
| ASSERT_EQ(0, pthread_join(signal_thread, &join_result)); | |
| ASSERT_EQ(SIGUSR1, received_signal); | |
| ASSERT_EQ(0, reinterpret_cast<int>(join_result)); | |
| } | |
| #if __BIONIC__ | |
| extern "C" int __pthread_clone(void* (*fn)(void*), void* child_stack, int flags, void* arg); | |
| TEST(pthread, __pthread_clone) { | |
| uintptr_t fake_child_stack[16]; | |
| errno = 0; | |
| ASSERT_EQ(-1, __pthread_clone(NULL, &fake_child_stack[0], CLONE_THREAD, NULL)); | |
| ASSERT_EQ(EINVAL, errno); | |
| } | |
| #endif | |
| #if __BIONIC__ // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise. | |
| TEST(pthread, pthread_setname_np__too_long) { | |
| ASSERT_EQ(ERANGE, pthread_setname_np(pthread_self(), "this name is far too long for linux")); | |
| } | |
| #endif | |
| #if __BIONIC__ // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise. | |
| TEST(pthread, pthread_setname_np__self) { | |
| ASSERT_EQ(0, pthread_setname_np(pthread_self(), "short 1")); | |
| } | |
| #endif | |
| #if __BIONIC__ // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise. | |
| TEST(pthread, pthread_setname_np__other) { | |
| // Emulator kernels don't currently support setting the name of other threads. | |
| char* filename = NULL; | |
| asprintf(&filename, "/proc/self/task/%d/comm", gettid()); | |
| struct stat sb; | |
| bool has_comm = (stat(filename, &sb) != -1); | |
| free(filename); | |
| if (has_comm) { | |
| pthread_t t1; | |
| ASSERT_EQ(0, pthread_create(&t1, NULL, SleepFn, reinterpret_cast<void*>(5))); | |
| ASSERT_EQ(0, pthread_setname_np(t1, "short 2")); | |
| } else { | |
| fprintf(stderr, "skipping test: this kernel doesn't have /proc/self/task/tid/comm files!\n"); | |
| } | |
| } | |
| #endif | |
| #if __BIONIC__ // Not all build servers have a new enough glibc? TODO: remove when they're on gprecise. | |
| TEST(pthread, pthread_setname_np__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| // Call pthread_setname_np after thread has already exited. | |
| ASSERT_EQ(ESRCH, pthread_setname_np(dead_thread, "short 3")); | |
| } | |
| #endif | |
| TEST(pthread, pthread_kill__0) { | |
| // Signal 0 just tests that the thread exists, so it's safe to call on ourselves. | |
| ASSERT_EQ(0, pthread_kill(pthread_self(), 0)); | |
| } | |
| TEST(pthread, pthread_kill__invalid_signal) { | |
| ASSERT_EQ(EINVAL, pthread_kill(pthread_self(), -1)); | |
| } | |
| static void pthread_kill__in_signal_handler_helper(int signal_number) { | |
| static int count = 0; | |
| ASSERT_EQ(SIGALRM, signal_number); | |
| if (++count == 1) { | |
| // Can we call pthread_kill from a signal handler? | |
| ASSERT_EQ(0, pthread_kill(pthread_self(), SIGALRM)); | |
| } | |
| } | |
| TEST(pthread, pthread_kill__in_signal_handler) { | |
| struct sigaction action; | |
| sigemptyset(&action.sa_mask); | |
| action.sa_flags = 0; | |
| action.sa_handler = pthread_kill__in_signal_handler_helper; | |
| sigaction(SIGALRM, &action, NULL); | |
| ASSERT_EQ(0, pthread_kill(pthread_self(), SIGALRM)); | |
| } | |
| TEST(pthread, pthread_detach__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| ASSERT_EQ(ESRCH, pthread_detach(dead_thread)); | |
| } | |
| TEST(pthread, pthread_getcpuclockid__clock_gettime) { | |
| pthread_t t; | |
| ASSERT_EQ(0, pthread_create(&t, NULL, SleepFn, reinterpret_cast<void*>(5))); | |
| clockid_t c; | |
| ASSERT_EQ(0, pthread_getcpuclockid(t, &c)); | |
| timespec ts; | |
| ASSERT_EQ(0, clock_gettime(c, &ts)); | |
| } | |
| TEST(pthread, pthread_getcpuclockid__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| clockid_t c; | |
| ASSERT_EQ(ESRCH, pthread_getcpuclockid(dead_thread, &c)); | |
| } | |
| TEST(pthread, pthread_getschedparam__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| int policy; | |
| sched_param param; | |
| ASSERT_EQ(ESRCH, pthread_getschedparam(dead_thread, &policy, ¶m)); | |
| } | |
| TEST(pthread, pthread_setschedparam__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| int policy = 0; | |
| sched_param param; | |
| ASSERT_EQ(ESRCH, pthread_setschedparam(dead_thread, policy, ¶m)); | |
| } | |
| TEST(pthread, pthread_join__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| void* result; | |
| ASSERT_EQ(ESRCH, pthread_join(dead_thread, &result)); | |
| } | |
| TEST(pthread, pthread_kill__no_such_thread) { | |
| pthread_t dead_thread; | |
| MakeDeadThread(dead_thread); | |
| ASSERT_EQ(ESRCH, pthread_kill(dead_thread, 0)); | |
| } | |
| TEST(pthread, pthread_join__multijoin) { | |
| bool done = false; | |
| pthread_t t1; | |
| ASSERT_EQ(0, pthread_create(&t1, NULL, SpinFn, &done)); | |
| pthread_t t2; | |
| ASSERT_EQ(0, pthread_create(&t2, NULL, JoinFn, reinterpret_cast<void*>(t1))); | |
| sleep(1); // (Give t2 a chance to call pthread_join.) | |
| // Multiple joins to the same thread should fail. | |
| ASSERT_EQ(EINVAL, pthread_join(t1, NULL)); | |
| done = true; | |
| // ...but t2's join on t1 still goes ahead (which we can tell because our join on t2 finishes). | |
| void* join_result; | |
| ASSERT_EQ(0, pthread_join(t2, &join_result)); | |
| ASSERT_EQ(0, reinterpret_cast<int>(join_result)); | |
| } | |
| static void* GetActualGuardSizeFn(void* arg) { | |
| pthread_attr_t attributes; | |
| pthread_getattr_np(pthread_self(), &attributes); | |
| pthread_attr_getguardsize(&attributes, reinterpret_cast<size_t*>(arg)); | |
| return NULL; | |
| } | |
| static size_t GetActualGuardSize(const pthread_attr_t& attributes) { | |
| size_t result; | |
| pthread_t t; | |
| pthread_create(&t, &attributes, GetActualGuardSizeFn, &result); | |
| void* join_result; | |
| pthread_join(t, &join_result); | |
| return result; | |
| } | |
| static void* GetActualStackSizeFn(void* arg) { | |
| pthread_attr_t attributes; | |
| pthread_getattr_np(pthread_self(), &attributes); | |
| pthread_attr_getstacksize(&attributes, reinterpret_cast<size_t*>(arg)); | |
| return NULL; | |
| } | |
| static size_t GetActualStackSize(const pthread_attr_t& attributes) { | |
| size_t result; | |
| pthread_t t; | |
| pthread_create(&t, &attributes, GetActualStackSizeFn, &result); | |
| void* join_result; | |
| pthread_join(t, &join_result); | |
| return result; | |
| } | |
| TEST(pthread, pthread_attr_setguardsize) { | |
| pthread_attr_t attributes; | |
| ASSERT_EQ(0, pthread_attr_init(&attributes)); | |
| // Get the default guard size. | |
| size_t default_guard_size; | |
| ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &default_guard_size)); | |
| // No such thing as too small: will be rounded up to one page by pthread_create. | |
| ASSERT_EQ(0, pthread_attr_setguardsize(&attributes, 128)); | |
| size_t guard_size; | |
| ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size)); | |
| ASSERT_EQ(128U, guard_size); | |
| ASSERT_EQ(4096U, GetActualGuardSize(attributes)); | |
| // Large enough and a multiple of the page size. | |
| ASSERT_EQ(0, pthread_attr_setguardsize(&attributes, 32*1024)); | |
| ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size)); | |
| ASSERT_EQ(32*1024U, guard_size); | |
| // Large enough but not a multiple of the page size; will be rounded up by pthread_create. | |
| ASSERT_EQ(0, pthread_attr_setguardsize(&attributes, 32*1024 + 1)); | |
| ASSERT_EQ(0, pthread_attr_getguardsize(&attributes, &guard_size)); | |
| ASSERT_EQ(32*1024U + 1, guard_size); | |
| } | |
| TEST(pthread, pthread_attr_setstacksize) { | |
| pthread_attr_t attributes; | |
| ASSERT_EQ(0, pthread_attr_init(&attributes)); | |
| // Get the default stack size. | |
| size_t default_stack_size; | |
| ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &default_stack_size)); | |
| // Too small. | |
| ASSERT_EQ(EINVAL, pthread_attr_setstacksize(&attributes, 128)); | |
| size_t stack_size; | |
| ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size)); | |
| ASSERT_EQ(default_stack_size, stack_size); | |
| ASSERT_GE(GetActualStackSize(attributes), default_stack_size); | |
| // Large enough and a multiple of the page size. | |
| ASSERT_EQ(0, pthread_attr_setstacksize(&attributes, 32*1024)); | |
| ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size)); | |
| ASSERT_EQ(32*1024U, stack_size); | |
| ASSERT_EQ(GetActualStackSize(attributes), 32*1024U); | |
| // Large enough but not a multiple of the page size; will be rounded up by pthread_create. | |
| ASSERT_EQ(0, pthread_attr_setstacksize(&attributes, 32*1024 + 1)); | |
| ASSERT_EQ(0, pthread_attr_getstacksize(&attributes, &stack_size)); | |
| ASSERT_EQ(32*1024U + 1, stack_size); | |
| #if __BIONIC__ | |
| // Bionic rounds up, which is what POSIX allows. | |
| ASSERT_EQ(GetActualStackSize(attributes), (32 + 4)*1024U); | |
| #else | |
| // glibc rounds down, in violation of POSIX. They document this in their BUGS section. | |
| ASSERT_EQ(GetActualStackSize(attributes), 32*1024U); | |
| #endif | |
| } |