blob: abd7c01c84dbc6fe6d49e001aea90dee78fd7df8 [file] [log] [blame]
/*
* Percpu refcounts:
* (C) 2012 Google, Inc.
* Author: Kent Overstreet <koverstreet@google.com>
*
* This implements a refcount with similar semantics to atomic_t - atomic_inc(),
* atomic_dec_and_test() - but percpu.
*
* There's one important difference between percpu refs and normal atomic_t
* refcounts; you have to keep track of your initial refcount, and then when you
* start shutting down you call percpu_ref_kill() _before_ dropping the initial
* refcount.
*
* The refcount will have a range of 0 to ((1U << 31) - 1), i.e. one bit less
* than an atomic_t - this is because of the way shutdown works, see
* percpu_ref_kill()/PERCPU_COUNT_BIAS.
*
* Before you call percpu_ref_kill(), percpu_ref_put() does not check for the
* refcount hitting 0 - it can't, if it was in percpu mode. percpu_ref_kill()
* puts the ref back in single atomic_t mode, collecting the per cpu refs and
* issuing the appropriate barriers, and then marks the ref as shutting down so
* that percpu_ref_put() will check for the ref hitting 0. After it returns,
* it's safe to drop the initial ref.
*
* USAGE:
*
* See fs/aio.c for some example usage; it's used there for struct kioctx, which
* is created when userspaces calls io_setup(), and destroyed when userspace
* calls io_destroy() or the process exits.
*
* In the aio code, kill_ioctx() is called when we wish to destroy a kioctx; it
* calls percpu_ref_kill(), then hlist_del_rcu() and synchronize_rcu() to remove
* the kioctx from the proccess's list of kioctxs - after that, there can't be
* any new users of the kioctx (from lookup_ioctx()) and it's then safe to drop
* the initial ref with percpu_ref_put().
*
* Code that does a two stage shutdown like this often needs some kind of
* explicit synchronization to ensure the initial refcount can only be dropped
* once - percpu_ref_kill() does this for you, it returns true once and false if
* someone else already called it. The aio code uses it this way, but it's not
* necessary if the code has some other mechanism to synchronize teardown.
* around.
*/
#ifndef _LINUX_PERCPU_REFCOUNT_H
#define _LINUX_PERCPU_REFCOUNT_H
#include <linux/atomic.h>
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/rcupdate.h>
#include <linux/gfp.h>
struct percpu_ref;
typedef void (percpu_ref_func_t)(struct percpu_ref *);
/* flags set in the lower bits of percpu_ref->percpu_count_ptr */
enum {
__PERCPU_REF_ATOMIC = 1LU << 0, /* operating in atomic mode */
__PERCPU_REF_DEAD = 1LU << 1, /* (being) killed */
__PERCPU_REF_ATOMIC_DEAD = __PERCPU_REF_ATOMIC | __PERCPU_REF_DEAD,
__PERCPU_REF_FLAG_BITS = 2,
};
/* @flags for percpu_ref_init() */
enum {
/*
* Start w/ ref == 1 in atomic mode. Can be switched to percpu
* operation using percpu_ref_switch_to_percpu(). If initialized
* with this flag, the ref will stay in atomic mode until
* percpu_ref_switch_to_percpu() is invoked on it.
*/
PERCPU_REF_INIT_ATOMIC = 1 << 0,
/*
* Start dead w/ ref == 0 in atomic mode. Must be revived with
* percpu_ref_reinit() before used. Implies INIT_ATOMIC.
*/
PERCPU_REF_INIT_DEAD = 1 << 1,
};
struct percpu_ref {
atomic_long_t count;
/*
* The low bit of the pointer indicates whether the ref is in percpu
* mode; if set, then get/put will manipulate the atomic_t.
*/
unsigned long percpu_count_ptr;
percpu_ref_func_t *release;
percpu_ref_func_t *confirm_switch;
bool force_atomic:1;
struct rcu_head rcu;
};
int __must_check percpu_ref_init(struct percpu_ref *ref,
percpu_ref_func_t *release, unsigned int flags,
gfp_t gfp);
void percpu_ref_exit(struct percpu_ref *ref);
void percpu_ref_switch_to_atomic(struct percpu_ref *ref,
percpu_ref_func_t *confirm_switch);
void percpu_ref_switch_to_percpu(struct percpu_ref *ref);
void percpu_ref_kill_and_confirm(struct percpu_ref *ref,
percpu_ref_func_t *confirm_kill);
void percpu_ref_reinit(struct percpu_ref *ref);
/**
* percpu_ref_kill - drop the initial ref
* @ref: percpu_ref to kill
*
* Must be used to drop the initial ref on a percpu refcount; must be called
* precisely once before shutdown.
*
* Puts @ref in non percpu mode, then does a call_rcu() before gathering up the
* percpu counters and dropping the initial ref.
*/
static inline void percpu_ref_kill(struct percpu_ref *ref)
{
return percpu_ref_kill_and_confirm(ref, NULL);
}
/*
* Internal helper. Don't use outside percpu-refcount proper. The
* function doesn't return the pointer and let the caller test it for NULL
* because doing so forces the compiler to generate two conditional
* branches as it can't assume that @ref->percpu_count is not NULL.
*/
static inline bool __ref_is_percpu(struct percpu_ref *ref,
unsigned long __percpu **percpu_countp)
{
unsigned long percpu_ptr;
/*
* The value of @ref->percpu_count_ptr is tested for
* !__PERCPU_REF_ATOMIC, which may be set asynchronously, and then
* used as a pointer. If the compiler generates a separate fetch
* when using it as a pointer, __PERCPU_REF_ATOMIC may be set in
* between contaminating the pointer value, meaning that
* ACCESS_ONCE() is required when fetching it.
*
* Also, we need a data dependency barrier to be paired with
* smp_store_release() in __percpu_ref_switch_to_percpu().
*
* Use lockless deref which contains both.
*/
percpu_ptr = lockless_dereference(ref->percpu_count_ptr);
/*
* Theoretically, the following could test just ATOMIC; however,
* then we'd have to mask off DEAD separately as DEAD may be
* visible without ATOMIC if we race with percpu_ref_kill(). DEAD
* implies ATOMIC anyway. Test them together.
*/
if (unlikely(percpu_ptr & __PERCPU_REF_ATOMIC_DEAD))
return false;
*percpu_countp = (unsigned long __percpu *)percpu_ptr;
return true;
}
/**
* percpu_ref_get_many - increment a percpu refcount
* @ref: percpu_ref to get
* @nr: number of references to get
*
* Analogous to atomic_long_add().
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline void percpu_ref_get_many(struct percpu_ref *ref, unsigned long nr)
{
unsigned long __percpu *percpu_count;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count))
this_cpu_add(*percpu_count, nr);
else
atomic_long_add(nr, &ref->count);
rcu_read_unlock_sched();
}
/**
* percpu_ref_get - increment a percpu refcount
* @ref: percpu_ref to get
*
* Analagous to atomic_long_inc().
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline void percpu_ref_get(struct percpu_ref *ref)
{
percpu_ref_get_many(ref, 1);
}
/**
* percpu_ref_tryget - try to increment a percpu refcount
* @ref: percpu_ref to try-get
*
* Increment a percpu refcount unless its count already reached zero.
* Returns %true on success; %false on failure.
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline bool percpu_ref_tryget(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
bool ret;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count)) {
this_cpu_inc(*percpu_count);
ret = true;
} else {
ret = atomic_long_inc_not_zero(&ref->count);
}
rcu_read_unlock_sched();
return ret;
}
/**
* percpu_ref_tryget_live - try to increment a live percpu refcount
* @ref: percpu_ref to try-get
*
* Increment a percpu refcount unless it has already been killed. Returns
* %true on success; %false on failure.
*
* Completion of percpu_ref_kill() in itself doesn't guarantee that this
* function will fail. For such guarantee, percpu_ref_kill_and_confirm()
* should be used. After the confirm_kill callback is invoked, it's
* guaranteed that no new reference will be given out by
* percpu_ref_tryget_live().
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline bool percpu_ref_tryget_live(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
bool ret = false;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count)) {
this_cpu_inc(*percpu_count);
ret = true;
} else if (!(ref->percpu_count_ptr & __PERCPU_REF_DEAD)) {
ret = atomic_long_inc_not_zero(&ref->count);
}
rcu_read_unlock_sched();
return ret;
}
/**
* percpu_ref_put_many - decrement a percpu refcount
* @ref: percpu_ref to put
* @nr: number of references to put
*
* Decrement the refcount, and if 0, call the release function (which was passed
* to percpu_ref_init())
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline void percpu_ref_put_many(struct percpu_ref *ref, unsigned long nr)
{
unsigned long __percpu *percpu_count;
rcu_read_lock_sched();
if (__ref_is_percpu(ref, &percpu_count))
this_cpu_sub(*percpu_count, nr);
else if (unlikely(atomic_long_sub_and_test(nr, &ref->count)))
ref->release(ref);
rcu_read_unlock_sched();
}
/**
* percpu_ref_put - decrement a percpu refcount
* @ref: percpu_ref to put
*
* Decrement the refcount, and if 0, call the release function (which was passed
* to percpu_ref_init())
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline void percpu_ref_put(struct percpu_ref *ref)
{
percpu_ref_put_many(ref, 1);
}
/**
* percpu_ref_is_dying - test whether a percpu refcount is dying or dead
* @ref: percpu_ref to test
*
* Returns %true if @ref is dying or dead.
*
* This function is safe to call as long as @ref is between init and exit
* and the caller is responsible for synchronizing against state changes.
*/
static inline bool percpu_ref_is_dying(struct percpu_ref *ref)
{
return ref->percpu_count_ptr & __PERCPU_REF_DEAD;
}
/**
* percpu_ref_is_zero - test whether a percpu refcount reached zero
* @ref: percpu_ref to test
*
* Returns %true if @ref reached zero.
*
* This function is safe to call as long as @ref is between init and exit.
*/
static inline bool percpu_ref_is_zero(struct percpu_ref *ref)
{
unsigned long __percpu *percpu_count;
if (__ref_is_percpu(ref, &percpu_count))
return false;
return !atomic_long_read(&ref->count);
}
#endif