blob: 54e64a4642329b2b03dfd65b1f6c07a99fba6fa0 [file] [log] [blame]
#!/bin/bash
# Common kernel options
OPTIONS=" DEBUG_SPINLOCK DEBUG_ATOMIC_SLEEP DEBUG_MUTEXES DEBUG_RT_MUTEXES"
OPTIONS="$OPTIONS DEVTMPFS DEVTMPFS_MOUNT FHANDLE"
OPTIONS="$OPTIONS IPV6 IPV6_ROUTER_PREF IPV6_MULTIPLE_TABLES IPV6_ROUTE_INFO"
OPTIONS="$OPTIONS TUN SYN_COOKIES IP_ADVANCED_ROUTER IP_MULTIPLE_TABLES"
OPTIONS="$OPTIONS NETFILTER NETFILTER_ADVANCED NETFILTER_XTABLES"
OPTIONS="$OPTIONS NETFILTER_XT_MARK NETFILTER_XT_TARGET_MARK"
OPTIONS="$OPTIONS IP_NF_IPTABLES IP_NF_MANGLE IP_NF_FILTER"
OPTIONS="$OPTIONS IP6_NF_IPTABLES IP6_NF_MANGLE IP6_NF_FILTER INET6_IPCOMP"
OPTIONS="$OPTIONS IPV6_OPTIMISTIC_DAD"
OPTIONS="$OPTIONS IPV6_ROUTE_INFO IPV6_ROUTER_PREF"
OPTIONS="$OPTIONS NETFILTER_XT_TARGET_NFLOG"
OPTIONS="$OPTIONS NETFILTER_XT_MATCH_QUOTA"
OPTIONS="$OPTIONS NETFILTER_XT_MATCH_QUOTA2"
OPTIONS="$OPTIONS NETFILTER_XT_MATCH_QUOTA2_LOG"
OPTIONS="$OPTIONS NETFILTER_XT_MATCH_SOCKET"
OPTIONS="$OPTIONS NETFILTER_XT_MATCH_QTAGUID"
OPTIONS="$OPTIONS INET_UDP_DIAG INET_DIAG_DESTROY"
OPTIONS="$OPTIONS IP_SCTP"
OPTIONS="$OPTIONS IP_NF_TARGET_REJECT IP_NF_TARGET_REJECT_SKERR"
OPTIONS="$OPTIONS IP6_NF_TARGET_REJECT IP6_NF_TARGET_REJECT_SKERR"
OPTIONS="$OPTIONS NET_KEY XFRM_USER XFRM_STATISTICS CRYPTO_CBC"
OPTIONS="$OPTIONS CRYPTO_CTR CRYPTO_HMAC CRYPTO_AES CRYPTO_SHA1"
OPTIONS="$OPTIONS CRYPTO_USER INET_ESP INET_XFRM_MODE_TRANSPORT"
OPTIONS="$OPTIONS INET_XFRM_MODE_TUNNEL INET6_ESP"
OPTIONS="$OPTIONS INET6_XFRM_MODE_TRANSPORT INET6_XFRM_MODE_TUNNEL"
OPTIONS="$OPTIONS CRYPTO_SHA256 CRYPTO_SHA512 CRYPTO_AES_X86_64 CRYPTO_NULL"
OPTIONS="$OPTIONS CRYPTO_GCM CRYPTO_ECHAINIV NET_IPVTI"
# Kernel version specific options
OPTIONS="$OPTIONS XFRM_INTERFACE" # Various device kernels
OPTIONS="$OPTIONS CGROUP_BPF" # Added in android-4.9
OPTIONS="$OPTIONS NF_SOCKET_IPV4 NF_SOCKET_IPV6" # Added in 4.9
OPTIONS="$OPTIONS INET_SCTP_DIAG" # Added in 4.7
OPTIONS="$OPTIONS SOCK_CGROUP_DATA" # Added in 4.5
OPTIONS="$OPTIONS CRYPTO_ECHAINIV" # Added in 4.1
OPTIONS="$OPTIONS BPF_SYSCALL" # Added in 3.18
OPTIONS="$OPTIONS IPV6_VTI" # Added in 3.13
OPTIONS="$OPTIONS IPV6_PRIVACY" # Removed in 3.12
OPTIONS="$OPTIONS NETFILTER_TPROXY" # Removed in 3.11
# UML specific options
OPTIONS="$OPTIONS BLK_DEV_UBD HOSTFS"
# QEMU specific options
OPTIONS="$OPTIONS VIRTIO VIRTIO_PCI VIRTIO_BLK NET_9P NET_9P_VIRTIO 9P_FS"
# Obsolete options present at some time in Android kernels
OPTIONS="$OPTIONS IP_NF_TARGET_REJECT_SKERR IP6_NF_TARGET_REJECT_SKERR"
# These two break the flo kernel due to differences in -Werror on recent GCC.
DISABLE_OPTIONS=" REISERFS_FS ANDROID_PMEM"
# This one breaks the fugu kernel due to a nonexistent sem_wait_array.
DISABLE_OPTIONS="$DISABLE_OPTIONS SYSVIPC"
# How many TAP interfaces to create to provide the VM with real network access
# via the host. This requires privileges (e.g., root access) on the host.
#
# This is not needed to run the tests, but can be used, for example, to allow
# the VM to update system packages, or to write tests that need access to a
# real network. The VM does not set up networking by default, but it contains a
# DHCP client and has the ability to use IPv6 autoconfiguration. This script
# does not perform any host-level setup beyond configuring tap interfaces;
# configuring IPv4 NAT and/or IPv6 router advertisements or ND proxying must
# be done separately.
NUMTAPINTERFACES=0
# The root filesystem disk image we'll use.
ROOTFS=${ROOTFS:-net_test.rootfs.20150203}
COMPRESSED_ROOTFS=$ROOTFS.xz
URL=https://dl.google.com/dl/android/$COMPRESSED_ROOTFS
# Parse arguments and figure out which test to run.
ARCH=${ARCH:-um}
J=${J:-64}
MAKE="make"
OUT_DIR=$(readlink -f ${OUT_DIR:-.})
KERNEL_DIR=$(readlink -f ${KERNEL_DIR:-.})
if [ "$OUT_DIR" != "$KERNEL_DIR" ]; then
MAKE="$MAKE O=$OUT_DIR"
fi
SCRIPT_DIR=$(dirname $(readlink -f $0))
CONFIG_SCRIPT=${KERNEL_DIR}/scripts/config
CONFIG_FILE=${OUT_DIR}/.config
consolemode=
netconfig=
testmode=
cmdline=
nowrite=0
nobuild=0
norun=0
while [ -n "$1" ]; do
if [ "$1" = "--builder" ]; then
consolemode="con=null,fd:1"
testmode=builder
shift
elif [ "$1" == "--readonly" ]; then
nowrite=1
shift
elif [ "$1" == "--nobuild" ]; then
nobuild=1
shift
elif [ "$1" == "--norun" ]; then
norun=1
shift
else
test=$1
break # Arguments after the test file are passed to the test itself.
fi
done
# Check that test file exists and is readable
test_file=$SCRIPT_DIR/$test
if [[ ! -e $test_file ]]; then
echo "test file '${test_file}' does not exist"
exit 1
fi
if [[ ! -x $test_file ]]; then
echo "test file '${test_file}' is not executable"
exit 1
fi
# Collect trailing arguments to pass to $test
test_args=${@:2}
function isRunningTest() {
[[ -n "$test" ]] && ! (( norun ))
}
function isBuildOnly() {
[[ -z "$test" ]] && (( norun )) && ! (( nobuild ))
}
if ! isRunningTest && ! isBuildOnly; then
echo "Usage:" >&2
echo " $0 [--builder] [--readonly] [--nobuild] <test>" >&2
echo " $0 --norun" >&2
exit 1
fi
cd $OUT_DIR
echo Running tests from: `pwd`
set -e
# Check if we need to uncompress the disk image.
# We use xz because it compresses better: to 42M vs 72M (gzip) / 62M (bzip2).
cd $SCRIPT_DIR
if [ ! -f $ROOTFS ]; then
echo "Deleting $COMPRESSED_ROOTFS" >&2
rm -f $COMPRESSED_ROOTFS
echo "Downloading $URL" >&2
wget -nv $URL
echo "Uncompressing $COMPRESSED_ROOTFS" >&2
unxz $COMPRESSED_ROOTFS
fi
echo "Using $ROOTFS"
cd -
# If network access was requested, create NUMTAPINTERFACES tap interfaces on
# the host, and prepare UML command line params to use them. The interfaces are
# called <user>TAP0, <user>TAP1, on the host, and eth0, eth1, ..., in the VM.
if (( $NUMTAPINTERFACES > 0 )); then
user=${USER:0:10}
tapinterfaces=
for id in $(seq 0 $(( NUMTAPINTERFACES - 1 )) ); do
tap=${user}TAP$id
tapinterfaces="$tapinterfaces $tap"
mac=$(printf fe:fd:00:00:00:%02x $id)
if [ "$ARCH" == "um" ]; then
netconfig="$netconfig eth$id=tuntap,$tap,$mac"
else
netconfig="$netconfig -netdev tap,id=hostnet$id,ifname=$tap,script=no,downscript=no"
netconfig="$netconfig -device virtio-net-pci,netdev=hostnet$id,id=net$id,mac=$mac"
fi
done
for tap in $tapinterfaces; do
if ! ip link list $tap > /dev/null; then
echo "Creating tap interface $tap" >&2
sudo tunctl -u $USER -t $tap
sudo ip link set $tap up
fi
done
fi
if [ -n "$KERNEL_BINARY" ]; then
nobuild=1
else
# Set default KERNEL_BINARY location if it was not provided.
if [ "$ARCH" == "um" ]; then
KERNEL_BINARY=./linux
else
# Assume x86_64 bzImage for now
KERNEL_BINARY=./arch/x86/boot/bzImage
fi
fi
if ((nobuild == 0)); then
make_flags=
if [ "$ARCH" == "um" ]; then
# Exporting ARCH=um SUBARCH=x86_64 doesn't seem to work, as it
# "sometimes" (?) results in a 32-bit kernel.
make_flags="$make_flags ARCH=$ARCH SUBARCH=x86_64 CROSS_COMPILE= "
fi
if [ -n "$CC" ]; then
# The CC flag is *not* inherited from the environment, so it must be
# passed in on the command line.
make_flags="$make_flags CC=$CC"
# TODO: Remove this workaround for https://lkml.org/lkml/2018/5/7/534
# Needs a change to clang to be merged, an updated toolchain, and
# a new __nostackprotector annotation of the affected PARAVIRT
# code in the affected kernel branches (android-4.4, android-4.9,
# android-4.14). This sidesteps the issue by disabling PARAVIRT.
if [ "$CC" == "clang" ]; then
DISABLE_OPTIONS="$DISABLE_OPTIONS PARAVIRT"
fi
fi
# If there's no kernel config at all, create one or UML won't work.
[ -n "$DEFCONFIG" ] || DEFCONFIG=defconfig
[ -f $CONFIG_FILE ] || (cd $KERNEL_DIR && $MAKE $make_flags $DEFCONFIG)
# Enable the kernel config options listed in $OPTIONS.
$CONFIG_SCRIPT --file $CONFIG_FILE ${OPTIONS// / -e }
# Disable the kernel config options listed in $DISABLE_OPTIONS.
$CONFIG_SCRIPT --file $CONFIG_FILE ${DISABLE_OPTIONS// / -d }
$MAKE $make_flags olddefconfig
# Compile the kernel.
if [ "$ARCH" == "um" ]; then
$MAKE -j$J $make_flags linux
else
$MAKE -j$J $make_flags
fi
fi
if (( norun == 1 )); then
exit 0
fi
if (( nowrite == 1 )); then
cmdline="ro"
fi
cmdline="$cmdline init=/sbin/net_test.sh"
cmdline="$cmdline net_test_args=\"$test_args\" net_test_mode=$testmode"
if [ "$ARCH" == "um" ]; then
# Get the absolute path to the test file that's being run.
cmdline="$cmdline net_test=/host$SCRIPT_DIR/$test"
# Use UML's /proc/exitcode feature to communicate errors on test failure
cmdline="$cmdline net_test_exitcode=/proc/exitcode"
# Map the --readonly flag to UML block device names
if ((nowrite == 0)); then
blockdevice=ubda
else
blockdevice="${blockdevice}r"
fi
exec $KERNEL_BINARY >&2 umid=net_test mem=512M \
$blockdevice=$SCRIPT_DIR/$ROOTFS $netconfig $consolemode $cmdline
else
# We boot into the filesystem image directly in all cases
cmdline="$cmdline root=/dev/vda"
# The path is stripped by the 9p export; we don't need SCRIPT_DIR
cmdline="$cmdline net_test=/host/$test"
# QEMU has no way to modify its exitcode; simulate it with a serial port.
#
# Choose to do it this way over writing a file to /host, because QEMU will
# initialize the 'exitcode' file for us, it avoids unnecessary writes to the
# host filesystem (which is normally not written to) and it allows us to
# communicate an exit code back in cases we do not have /host mounted.
#
# The assignment of 'ttyS1' here is magical -- we know 'ttyS0' will be our
# serial port from the hard-coded '-serial stdio' flag below, and so this
# second serial port will be 'ttyS1'.
cmdline="$cmdline net_test_exitcode=/dev/ttyS1"
# Map the --readonly flag to a QEMU block device flag
blockdevice=
if ((nowrite > 0)); then
blockdevice=",readonly"
fi
blockdevice="-drive file=$SCRIPT_DIR/$ROOTFS,format=raw,if=none,id=drive-virtio-disk0$blockdevice"
blockdevice="$blockdevice -device virtio-blk-pci,drive=drive-virtio-disk0"
# Assume x86_64 PC emulation for now
qemu-system-x86_64 >&2 -name net_test -m 512 \
-kernel $KERNEL_BINARY \
-no-user-config -nodefaults -no-reboot -display none \
-machine pc,accel=kvm -cpu host -smp 4,sockets=4,cores=1,threads=1 \
-device virtio-rng-pci \
-chardev file,id=exitcode,path=exitcode \
-device isa-serial,chardev=exitcode \
-fsdev local,security_model=mapped-xattr,id=fsdev0,fmode=0644,dmode=0755,path=$SCRIPT_DIR \
-device virtio-9p-pci,id=fs0,fsdev=fsdev0,mount_tag=host \
$blockdevice $netconfig -serial stdio -append "$cmdline"
[ -s exitcode ] && exitcode=`cat exitcode | tr -d '\r'` || exitcode=1
rm -f exitcode
exit $exitcode
fi