| /* |
| * cma3000_d0x_i2c.c |
| * |
| * Implements I2C interface for VTI CMA300_D0x Accelerometer driver |
| * |
| * Copyright (C) 2010 Texas Instruments |
| * Author: Hemanth V <hemanthv@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/cma3000.h> |
| #include "cma3000_d0x.h" |
| |
| int cma3000_set(struct cma3000_accl_data *accl, u8 reg, u8 val, char *msg) |
| { |
| int ret = i2c_smbus_write_byte_data(accl->client, reg, val); |
| if (ret < 0) |
| dev_err(&accl->client->dev, |
| "i2c_smbus_write_byte_data failed (%s)\n", msg); |
| return ret; |
| } |
| |
| int cma3000_read(struct cma3000_accl_data *accl, u8 reg, char *msg) |
| { |
| int ret = i2c_smbus_read_byte_data(accl->client, reg); |
| if (ret < 0) |
| dev_err(&accl->client->dev, |
| "i2c_smbus_read_byte_data failed (%s)\n", msg); |
| return ret; |
| } |
| |
| static int __devinit cma3000_accl_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret; |
| struct cma3000_accl_data *data = NULL; |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (data == NULL) { |
| ret = -ENOMEM; |
| goto err_op_failed; |
| } |
| |
| data->client = client; |
| i2c_set_clientdata(client, data); |
| |
| ret = cma3000_init(data); |
| if (ret) |
| goto err_op_failed; |
| |
| return 0; |
| |
| err_op_failed: |
| |
| if (data != NULL) |
| kfree(data); |
| |
| return ret; |
| } |
| |
| static int __devexit cma3000_accl_remove(struct i2c_client *client) |
| { |
| struct cma3000_accl_data *data = i2c_get_clientdata(client); |
| int ret; |
| |
| ret = cma3000_exit(data); |
| i2c_set_clientdata(client, NULL); |
| kfree(data); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int cma3000_accl_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct cma3000_accl_data *data = platform_get_drvdata(pdev); |
| |
| return cma3000_poweroff(data); |
| } |
| |
| static int cma3000_accl_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct cma3000_accl_data *data = platform_get_drvdata(pdev); |
| |
| return cma3000_poweron(data); |
| } |
| |
| static const struct dev_pm_ops cma3000_pm_ops = { |
| .suspend = cma3000_accl_suspend, |
| .resume = cma3000_accl_resume, |
| }; |
| |
| #endif |
| |
| static const struct i2c_device_id cma3000_id[] = { |
| { "cma3000_accl", 0 }, |
| { }, |
| }; |
| |
| static struct i2c_driver cma3000_accl_driver = { |
| .probe = cma3000_accl_probe, |
| .remove = cma3000_accl_remove, |
| .id_table = cma3000_id, |
| .driver = { |
| .name = "cma3000_accl", |
| #ifdef CONFIG_PM |
| .pm = &cma3000_pm_ops, |
| #endif |
| }, |
| }; |
| |
| static int __init cma3000_accl_init(void) |
| { |
| return i2c_add_driver(&cma3000_accl_driver); |
| } |
| |
| static void __exit cma3000_accl_exit(void) |
| { |
| i2c_del_driver(&cma3000_accl_driver); |
| } |
| |
| module_init(cma3000_accl_init); |
| module_exit(cma3000_accl_exit); |
| |
| MODULE_DESCRIPTION("CMA3000-D0x Accelerometer Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>"); |