| /* Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &soc { |
| qcom,mdss_dsi_sharp_qhd_video { |
| compatible = "qcom,mdss-dsi-panel"; |
| label = "sharp QHD LS043T1LE01 video mode dsi panel"; |
| status = "disable"; |
| qcom,dsi-ctrl-phandle = <&mdss_dsi0>; |
| qcom,enable-gpio = <&msmgpio 58 0>; |
| qcom,rst-gpio = <&pm8941_gpios 19 0>; |
| qcom,mdss-pan-res = <540 960>; |
| qcom,mdss-pan-bpp = <24>; |
| qcom,mdss-pan-dest = "display_1"; |
| qcom,mdss-pan-porch-values = <80 32 48 15 10 3>; /* HBP, HPW, HFP, VBP, VPW, VFP */ |
| qcom,mdss-pan-underflow-clr = <0xff>; |
| qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled"; |
| qcom,mdss-pan-bl-levels = <1 4095>; |
| qcom,mdss-pan-dsi-mode = <0>; |
| qcom,mdss-pan-dsi-h-pulse-mode = <1>; |
| qcom,mdss-pan-dsi-h-power-stop = <0 0 0>; |
| qcom,mdss-pan-dsi-bllp-power-stop = <1 1>; |
| qcom,mdss-pan-dsi-traffic-mode = <0>; |
| qcom,mdss-pan-dsi-dst-format = <3>; |
| qcom,mdss-pan-dsi-vc = <0>; |
| qcom,mdss-pan-dsi-rgb-swap = <2>; |
| qcom,mdss-pan-dsi-data-lanes = <1 1 0 0>; |
| qcom,mdss-pan-dsi-dlane-swap = <0>; |
| qcom,mdss-pan-dsi-t-clk = <0x1c 0x04>; |
| qcom,mdss-pan-dsi-stream = <0>; |
| qcom,mdss-pan-dsi-mdp-tr = <0x04>; |
| qcom,mdss-pan-dsi-dma-tr = <0x04>; |
| qcom,mdss-pan-frame-rate = <60>; |
| qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regulator settings */ |
| 20 00 01]; |
| qcom,panel-phy-timingSettings = [46 1d 20 00 39 3a |
| 21 21 32 03 04 00]; |
| qcom,panel-phy-strengthCtrl = [ff 06]; |
| qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */ |
| 00 00]; |
| qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */ |
| 00 00 00 00 05 00 00 01 97 /* lane1 config */ |
| 00 00 00 00 0a 00 00 01 97 /* lane2 config */ |
| 00 00 00 00 0f 00 00 01 97 /* lane3 config */ |
| 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */ |
| qcom,panel-on-cmds = [05 01 00 00 32 00 02 01 00 /* sw reset */ |
| 05 01 00 00 0a 00 02 11 00 /* exit sleep */ |
| 15 01 00 00 0a 00 02 53 2c /* backlight on */ |
| 15 01 00 00 0a 00 02 51 ff /* brightness max */ |
| 05 01 00 00 0a 00 02 29 00 /* display on */ |
| 15 01 00 00 0a 00 02 ae 03 /* set num of lanes */ |
| 15 01 00 00 0a 00 02 3a 77 /* rgb_888 */]; |
| qcom,on-cmds-dsi-state = "DSI_LP_MODE"; |
| qcom,panel-off-cmds = [05 01 00 00 0a 00 02 28 00 /* display off */ |
| 05 01 00 00 78 00 02 10 00 /* enter sleep */]; |
| qcom,off-cmds-dsi-state = "DSI_HS_MODE"; |
| }; |
| }; |
