| /* |
| * Synaptics DSX touchscreen driver |
| * |
| * Copyright (C) 2012 Synaptics Incorporated |
| * |
| * Copyright (C) 2012 Alexandra Chin <alexandra.chin@tw.synaptics.com> |
| * Copyright (C) 2012 Scott Lin <scott.lin@tw.synaptics.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _SYNAPTICS_DSX_H_ |
| #define _SYNAPTICS_DSX_H_ |
| |
| #define PLATFORM_DRIVER_NAME "synaptics_dsx" |
| #define I2C_DRIVER_NAME "synaptics_dsx_i2c" |
| #define SPI_DRIVER_NAME "synaptics_dsx_spi" |
| |
| /* |
| * struct synaptics_dsx_cap_button_map - 0D button map |
| * @nbuttons: number of 0D buttons |
| * @map: pointer to array of button types |
| */ |
| struct synaptics_dsx_cap_button_map { |
| unsigned char nbuttons; |
| unsigned int *map; |
| }; |
| |
| #define SYN_CFG_BLK_UNIT (16) |
| #define SYN_CONFIG_SIZE (128 * SYN_CFG_BLK_UNIT) |
| |
| struct synaptics_rmi4_config { |
| uint32_t sensor_id; |
| uint32_t eng_id; |
| uint32_t pr_number; |
| uint8_t cover_setting_size; |
| uint8_t cover_setting[10]; |
| uint8_t uncover_setting[10]; |
| uint8_t glove_mode_setting[10]; |
| uint16_t length; |
| uint8_t config[SYN_CONFIG_SIZE]; |
| const char *disp_panel; |
| }; |
| |
| /* |
| * struct synaptics_dsx_board_data - DSX board data |
| * @x_flip: x flip flag |
| * @y_flip: y flip flag |
| * @swap_axes: swap axes flag |
| * @irq_gpio: attention interrupt GPIO |
| * @irq_on_state: attention interrupt active state |
| * @power_gpio: power switch GPIO |
| * @power_on_state: power switch active state |
| * @reset_gpio: reset GPIO |
| * @reset_on_state: reset active state |
| * @irq_flags: IRQ flags |
| * @device_descriptor_addr: HID device descriptor address |
| * @panel_x: x-axis resolution of display panel |
| * @panel_y: y-axis resolution of display panel |
| * @power_delay_ms: delay time to wait after powering up device |
| * @reset_delay_ms: delay time to wait after resetting device |
| * @reset_active_ms: reset active time |
| * @byte_delay_us: delay time between two bytes of SPI data |
| * @block_delay_us: delay time between two SPI transfers |
| * @pwr_reg_name: pointer to name of regulator for power control |
| * @bus_reg_name: pointer to name of regulator for bus pullup control |
| * @cap_button_map: pointer to 0D button map |
| */ |
| struct synaptics_dsx_board_data { |
| bool x_flip; |
| bool y_flip; |
| bool swap_axes; |
| int irq_gpio; |
| int irq_on_state; |
| int power_gpio; |
| int power_gpio_1v8; |
| int power_on_state; |
| int reset_gpio; |
| int reset_on_state; |
| int switch_gpio; |
| unsigned long irq_flags; |
| unsigned short device_descriptor_addr; |
| unsigned int panel_x; |
| unsigned int panel_y; |
| unsigned int power_delay_ms; |
| unsigned int reset_delay_ms; |
| unsigned int reset_active_ms; |
| unsigned int byte_delay_us; |
| unsigned int block_delay_us; |
| const char *pwr_reg_name; |
| const char *bus_reg_name; |
| struct synaptics_dsx_cap_button_map *cap_button_map; |
| uint32_t eng_id_mask; |
| uint32_t eng_id; |
| uint16_t tw_pin_mask; |
| uint32_t display_width; |
| uint32_t display_height; |
| uint8_t update_feature; |
| uint8_t support_glove; |
| uint8_t support_cover; |
| uint32_t hall_block_touch_time; |
| int config_num; |
| struct synaptics_rmi4_config *config_table; |
| struct kobject *vk_obj; |
| struct kobj_attribute *vk2Use; |
| }; |
| |
| #endif |
