|  | /* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 and | 
|  | * only version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #ifndef QPNP_PON_H | 
|  | #define QPNP_PON_H | 
|  |  | 
|  | #include <linux/errno.h> | 
|  |  | 
|  | /** | 
|  | * enum pon_trigger_source: List of PON trigger sources | 
|  | * %PON_SMPL:		PON triggered by SMPL - Sudden Momentary Power Loss | 
|  | * %PON_RTC:		PON triggered by RTC alarm | 
|  | * %PON_DC_CHG:		PON triggered by insertion of DC charger | 
|  | * %PON_USB_CHG:	PON triggered by insertion of USB | 
|  | * %PON_PON1:		PON triggered by other PMIC (multi-PMIC option) | 
|  | * %PON_CBLPWR_N:	PON triggered by power-cable insertion | 
|  | * %PON_KPDPWR_N:	PON triggered by long press of the power-key | 
|  | */ | 
|  | enum pon_trigger_source { | 
|  | PON_SMPL = 1, | 
|  | PON_RTC, | 
|  | PON_DC_CHG, | 
|  | PON_USB_CHG, | 
|  | PON_PON1, | 
|  | PON_CBLPWR_N, | 
|  | PON_KPDPWR_N, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * enum pon_power_off_type: Possible power off actions to perform | 
|  | * %PON_POWER_OFF_WARM_RESET:	Reset the MSM but not all PMIC peripherals | 
|  | * %PON_POWER_OFF_SHUTDOWN:	Shutdown the MSM and PMIC completely | 
|  | * %PON_POWER_OFF_HARD_RESET:	Reset the MSM and all PMIC peripherals | 
|  | */ | 
|  | enum pon_power_off_type { | 
|  | PON_POWER_OFF_WARM_RESET	= 0x01, | 
|  | PON_POWER_OFF_SHUTDOWN		= 0x04, | 
|  | PON_POWER_OFF_HARD_RESET	= 0x07, | 
|  | }; | 
|  |  | 
|  | /* only 3bits used in the SOFT_RB_SPARE reg | 
|  | in old implementation while 7 bits in new. | 
|  | default reg value is 0x0, which should | 
|  | correspond to unknown/invalid | 
|  | --NOT USED-- | 
|  | */ | 
|  | enum pon_restart_reason { | 
|  | PON_RESTART_REASON_UNKNOWN	= 0x00, | 
|  | PON_RESTART_REASON_RECOVERY	= 0x01, | 
|  | PON_RESTART_REASON_BOOTLOADER	= 0x02, | 
|  | PON_RESTART_REASON_RTC		= 0x03, | 
|  | PON_RESTART_REASON_DMVERITY	= 0x04, | 
|  | PON_RESTART_REASON_OTHER	= 0x05, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_QPNP_POWER_ON | 
|  | int qpnp_pon_system_pwr_off(enum pon_power_off_type type); | 
|  | int qpnp_pon_is_warm_reset(void); | 
|  | int qpnp_pon_trigger_config(enum pon_trigger_source pon_src, bool enable); | 
|  | int qpnp_pon_wd_config(bool enable); | 
|  | int qpnp_pon_set_restart_reason(uint8_t reason); | 
|  | bool qpnp_pon_check_hard_reset_stored(void); | 
|  |  | 
|  | #else | 
|  | static int qpnp_pon_system_pwr_off(enum pon_power_off_type type) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  | static inline int qpnp_pon_is_warm_reset(void) { return -ENODEV; } | 
|  | static inline int qpnp_pon_trigger_config(enum pon_trigger_source pon_src, | 
|  | bool enable) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  | int qpnp_pon_wd_config(bool enable) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  | static inline int qpnp_pon_set_restart_reason(uint8_t reason) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  | static inline bool qpnp_pon_check_hard_reset_stored(void) | 
|  | { | 
|  | return false; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #endif |