| QTI LiQUID Docking Station |
| |
| This device describes the interface used when connecting a Qualcomm |
| Technology LiQUID Mobile Development Platform to its docking station. |
| This particular device describe's the dock's USB hub and Ethernet ports. |
| The interface consists of GPIOs used for controlling the main power |
| supply and reset lines. |
| |
| Required properties: |
| - compatible: Should be "qcom,liquid-dock". "qcom,apq8084-dock" is |
| also supported but deprecated. |
| - qcom,dock-detect-gpio: phandle to a GPIO node corresponding to the input |
| signal indicating when the dock is connected |
| - qcom,usb-host: phandle to the USB host controller connected to the dock port |
| |
| Optional properties: |
| - qcom,dock-enable-gpio: phandle to a GPIO node corresponding to the output |
| signal that turns on/off power to the ports |
| - qcom,dock-hub-reset-gpio: phandle to a GPIO node corresponding to the output |
| signal that resets the USB ports |
| - qcom,dock-eth-reset-gpio: phandle to a GPIO node corresponding to the output |
| signal that resets the Ethernet ports |