| * Silicon Image-8334 MHL Tx |
| |
| Required properties: |
| - compatible: must be "qcom,mhl-sii8334" |
| - reg: i2c slave address |
| - mhl-intr-gpio: MHL interrupt gpio coming out of sii8334 |
| - mhl-pwr-gpio: MHL power gpio required for power rails |
| - mhl-rst-gpio: MHL reset gpio going into sii8334 for toggling reset pin |
| - <supply-name>-supply: phandle to the regulator device tree node. |
| - qcom,hdmi-tx-map: phandle to the hdmi tx device tree node. |
| |
| Example: |
| i2c@f9967000 { |
| sii8334@72 { |
| compatible = "qcom,mhl-sii8334"; |
| reg = <0x72>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <82 0x8>; |
| mhl-intr-gpio = <&msmgpio 82 0>; |
| mhl-pwr-gpio = <&msmgpio 12 0>; |
| mhl-rst-gpio = <&pm8941_mpps 8 0>; |
| avcc_18-supply = <&pm8941_l24>; |
| avcc_12-supply = <&pm8941_l2>; |
| smps3a-supply = <&pm8941_s3>; |
| vdda-supply = <&pm8941_l12>; |
| qcom,hdmi-tx-map = <&mdss_hdmi_tx>; |
| }; |
| }; |
