| QTI's Boost Dynamic Controller Driver |
| |
| Boost Dynamic Controller changes boost regulator mode to force bypass mode or |
| force boost mode according to VPH voltage level dynamically. |
| |
| Required properties: |
| - compatible: Must be "qcom,boost-dynamic-controller" |
| - qcom,vph-threshold-adc_tm: The phandle to the corresponding VADC_TM device. |
| - qcom,vph-vadc: The phandle to the corresponding VADC device. |
| - qcom,boost-dynamic-controller-vph-high-threshold-uv: The threshold in uV for Boost Dynamic Controller to enable force bypass mode when the VPH power is larger than it. |
| - qcom,boost-dynamic-controller-vph-low-threshold-uv: The threshold in uV for Boost Dynamic Controller to disable force bypass mode when the VPH power is less than it. |
| - qcom,boost-dynamic-controller-boost-resource-type: A string used to describe the type of the RPM resource who controls the boost regulator. |
| - qcom,boost-dynamic-controller-boost-resource-key: A string used to describe the key of the RPM resource who controls the boost regulator. |
| - qcom,boost-dynamic-controller-boost-resource-id: The id of the RPM resource who controls the boost regulator. |
| |
| Example: |
| qcom,boost-dynamic-controller { |
| compatible = "qcom,boost-dynamic-controller"; |
| qcom,vph-threshold-adc_tm = <&pma8084_adc_tm>; |
| qcom,vph-vadc = <&pma8084_vadc>; |
| qcom,boost-dynamic-controller-vph-high-threshold-uv = <3700000>; |
| qcom,boost-dynamic-controller-vph-low-threshold-uv = <3650000>; |
| qcom,boost-dynamic-controller-boost-resource-type = "bbya"; |
| qcom,boost-dynamic-controller-boost-resource-key = "bypa"; |
| qcom,boost-dynamic-controller-boost-resource-id = <1>; |
| }; |
| |
