arch/arm64/boot/dts/google/sm8150-floral-display.dtsi

/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include "dsi-panel-s6e3ha8-dsc-wqhd-cmd.dtsi"

#include <dt-bindings/clock/mdss-10nm-pll-clk.h>

&sde_dsi {
	vdd-supply = <&display_panel_avdd_eldo>;
	vddio-supply = <&pm8150_l14>;
	vci-supply = <&pm8150l_l9>;

	qcom,platform-reset-gpio = <&tlmm 67 0>;
	qcom,platform-mode-gpio = <>;
	qcom,panel-mode-gpio = <>;

	qcom,dsi-display-list = <&dsi_s6e3ha8_cmd_display>;
};

// Without the line below, display corruption occurs.
&mdss_dsi0 {
	qcom,null-insertion-enabled;
};

&soc {
	dsi_s6e3ha8_cmd_display: qcom,dsi-display@0 {
		label = "dsi_s6e3ha8_cmd_display";
		qcom,display-type = "primary";
		qcom,dsi-display-active;

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_s6e3ha8_dsc_wqhd_cmd>;
	};
};

&dsi_s6e3ha8_dsc_wqhd_cmd {
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 67 0>;
	qcom,panel-mode-gpio = <>;

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_s6e3ha8>;


	qcom,mdss-dsi-t-clk-post = <0x17>;
	qcom,mdss-dsi-t-clk-pre = <0X19>;
	qcom,mdss-dsi-display-timings {
		timing@0 {
			qcom,mdss-dsi-panel-phy-timings =
					[00 1E 08 07 24 22 08 08 05 03 04 19 17 00];
		};
	};
};

&soc {
	dsi_panel_pwr_supply_s6e3ha8: dsi_panel_pwr_supply_s6e3ha8 {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
			reg = <0>;
			qcom,supply-name = "vddio";
			qcom,supply-min-voltage = <1800000>;
			qcom,supply-max-voltage = <1800000>;
			qcom,supply-enable-load = <100000>;
			qcom,supply-disable-load = <100>;
			qcom,supply-post-on-sleep = <0>;
		};

		qcom,panel-supply-entry@1 {
			reg = <1>;
			qcom,supply-name = "vci";
			qcom,supply-min-voltage = <2960000>;
			qcom,supply-max-voltage = <2960000>;
			qcom,supply-enable-load = <100000>;
			qcom,supply-disable-load = <100>;
			qcom,supply-post-on-sleep = <0>;
		};
	};
};