| #ifndef __UAPI_CAM_ISP_H__ |
| #define __UAPI_CAM_ISP_H__ |
| |
| #include "cam_defs.h" |
| #include "cam_isp_vfe.h" |
| #include "cam_isp_ife.h" |
| |
| |
| /* ISP driver name */ |
| #define CAM_ISP_DEV_NAME "cam-isp" |
| |
| /* HW type */ |
| #define CAM_ISP_HW_BASE 0 |
| #define CAM_ISP_HW_CSID 1 |
| #define CAM_ISP_HW_VFE 2 |
| #define CAM_ISP_HW_IFE 3 |
| #define CAM_ISP_HW_ISPIF 4 |
| #define CAM_ISP_HW_MAX 5 |
| |
| /* Color Pattern */ |
| #define CAM_ISP_PATTERN_BAYER_RGRGRG 0 |
| #define CAM_ISP_PATTERN_BAYER_GRGRGR 1 |
| #define CAM_ISP_PATTERN_BAYER_BGBGBG 2 |
| #define CAM_ISP_PATTERN_BAYER_GBGBGB 3 |
| #define CAM_ISP_PATTERN_YUV_YCBYCR 4 |
| #define CAM_ISP_PATTERN_YUV_YCRYCB 5 |
| #define CAM_ISP_PATTERN_YUV_CBYCRY 6 |
| #define CAM_ISP_PATTERN_YUV_CRYCBY 7 |
| #define CAM_ISP_PATTERN_MAX 8 |
| |
| /* Usage Type */ |
| #define CAM_ISP_RES_USAGE_SINGLE 0 |
| #define CAM_ISP_RES_USAGE_DUAL 1 |
| #define CAM_ISP_RES_USAGE_MAX 2 |
| |
| /* Resource ID */ |
| #define CAM_ISP_RES_ID_PORT 0 |
| #define CAM_ISP_RES_ID_CLK 1 |
| #define CAM_ISP_RES_ID_MAX 2 |
| |
| /* Resource Type - Type of resource for the resource id |
| * defined in cam_isp_vfe.h, cam_isp_ife.h |
| */ |
| |
| /* Lane Type in input resource for Port */ |
| #define CAM_ISP_LANE_TYPE_DPHY 0 |
| #define CAM_ISP_LANE_TYPE_CPHY 1 |
| #define CAM_ISP_LANE_TYPE_MAX 2 |
| |
| /* ISP Resurce Composite Group ID */ |
| #define CAM_ISP_RES_COMP_GROUP_NONE 0 |
| #define CAM_ISP_RES_COMP_GROUP_ID_0 1 |
| #define CAM_ISP_RES_COMP_GROUP_ID_1 2 |
| #define CAM_ISP_RES_COMP_GROUP_ID_2 3 |
| #define CAM_ISP_RES_COMP_GROUP_ID_3 4 |
| #define CAM_ISP_RES_COMP_GROUP_ID_4 5 |
| #define CAM_ISP_RES_COMP_GROUP_ID_5 6 |
| #define CAM_ISP_RES_COMP_GROUP_ID_MAX 6 |
| |
| /* ISP packet opcode for ISP */ |
| #define CAM_ISP_PACKET_OP_BASE 0 |
| #define CAM_ISP_PACKET_INIT_DEV 1 |
| #define CAM_ISP_PACKET_UPDATE_DEV 2 |
| #define CAM_ISP_PACKET_OP_MAX 3 |
| |
| /* ISP packet meta_data type for command buffer */ |
| #define CAM_ISP_PACKET_META_BASE 0 |
| #define CAM_ISP_PACKET_META_LEFT 1 |
| #define CAM_ISP_PACKET_META_RIGHT 2 |
| #define CAM_ISP_PACKET_META_COMMON 3 |
| #define CAM_ISP_PACKET_META_DMI_LEFT 4 |
| #define CAM_ISP_PACKET_META_DMI_RIGHT 5 |
| #define CAM_ISP_PACKET_META_DMI_COMMON 6 |
| #define CAM_ISP_PACKET_META_CLOCK 7 |
| #define CAM_ISP_PACKET_META_CSID 8 |
| #define CAM_ISP_PACKET_META_MAX 9 |
| |
| |
| /* Query devices */ |
| /** |
| * struct cam_isp_dev_cap_info - A cap info for particular hw type |
| * |
| * @hw_type: Hardware type for the cap info |
| * @hw_version: Hardware version |
| * |
| */ |
| struct cam_isp_dev_cap_info { |
| uint32_t hw_type; |
| struct cam_hw_version hw_version; |
| }; |
| |
| /** |
| * struct cam_isp_query_cap_cmd - ISP query device capability payload |
| * |
| * @device_iommu: returned iommu handles for device |
| * @cdm_iommu: returned iommu handles for cdm |
| * @num_dev: returned number of device capabilities |
| * @reserved: reserved field for alignment |
| * @dev_caps: returned device capability array |
| * |
| */ |
| struct cam_isp_query_cap_cmd { |
| struct cam_iommu_handle device_iommu; |
| struct cam_iommu_handle cdm_iommu; |
| int32_t num_dev; |
| uint32_t reserved; |
| struct cam_isp_dev_cap_info dev_caps[CAM_ISP_HW_MAX]; |
| }; |
| |
| /* Acquire Device */ |
| /** |
| * struct cam_isp_out_port_info - An output port resource info |
| * |
| * @res_type: output resource type defined in file |
| * cam_isp_vfe.h or cam_isp_ife.h |
| * @format: output format of the resource |
| * @wdith: output width in pixels |
| * @height: output height in lines |
| * @comp_grp_id: composite group id for the resource. |
| * @split_point: split point in pixels for the dual VFE. |
| * @secure_mode: flag to tell if output should be run in secure |
| * mode or not. See cam_defs.h for definition |
| * @reserved: reserved field for alignment |
| * |
| */ |
| struct cam_isp_out_port_info { |
| uint32_t res_type; |
| uint32_t format; |
| uint32_t width; |
| uint32_t height; |
| uint32_t comp_grp_id; |
| uint32_t split_point; |
| uint32_t secure_mode; |
| uint32_t reserved; |
| }; |
| |
| /** |
| * struct cam_isp_in_port_info - An input port resource info |
| * |
| * @res_type: input resource type define in file |
| * cam_isp_vfe.h or cam_isp_ife.h |
| * @lane_type: lane type: c-phy or d-phy. |
| * @lane_num: active lane number |
| * @lane_cfg: lane configurations: 4 bits per lane |
| * @vc: input virtual channel number |
| * @dt: input data type number |
| * @format: input format |
| * @test_pattern: test pattern for the testgen |
| * @usage_type: whether dual vfe is required |
| * @left_start: left input start offset in pixels |
| * @left_stop: left input stop offset in pixels |
| * @left_width: left input width in pixels |
| * @right_start: right input start offset in pixels. |
| * Only for Dual VFE |
| * @right_stop: right input stop offset in pixels. |
| * Only for Dual VFE |
| * @right_width: right input width in pixels. |
| * Only for dual VFE |
| * @line_start: top of the line number |
| * @line_stop: bottome of the line number |
| * @height: input height in lines |
| * @pixel_clk; sensor output clock |
| * @batch_size: batch size for HFR mode |
| * @reserved: reserved field for alignment |
| * @num_out_res: number of the output resource associated |
| * @data: payload that contains the output resources |
| * |
| */ |
| struct cam_isp_in_port_info { |
| uint32_t res_type; |
| uint32_t lane_type; |
| uint32_t lane_num; |
| uint32_t lane_cfg; |
| uint32_t vc; |
| uint32_t dt; |
| uint32_t format; |
| uint32_t test_pattern; |
| uint32_t usage_type; |
| uint32_t left_start; |
| uint32_t left_stop; |
| uint32_t left_width; |
| uint32_t right_start; |
| uint32_t right_stop; |
| uint32_t right_width; |
| uint32_t line_start; |
| uint32_t line_stop; |
| uint32_t height; |
| uint32_t pixel_clk; |
| uint32_t batch_size; |
| uint32_t reserved; |
| uint32_t num_out_res; |
| struct cam_isp_out_port_info data[1]; |
| }; |
| |
| /** |
| * struct cam_isp_resource - A resource bundle |
| * |
| * @resoruce_id: resource id for the resource bundle |
| * @length: length of the while resource blob |
| * @handle_type: type of the resource handle |
| * @reserved: reserved field for alignment |
| * @res_hdl: resource handle that points to the |
| * resource array; |
| * |
| */ |
| struct cam_isp_resource { |
| uint32_t resource_id; |
| uint32_t length; |
| uint32_t handle_type; |
| uint32_t reserved; |
| uint64_t res_hdl; |
| }; |
| |
| /** |
| * struct cam_isp_acquire_dev_cmd - control payload for acquire devices |
| * |
| * @session_handle: session handle for the acquire command |
| * @dev_handle: device handle to be returned |
| * @num_resources: number of the resources to be acquired |
| * @handle_type: resource handle type: |
| * 1 = user poniter, 2 = mem handle |
| * @resources_hdl: resource handle that refers to the actual |
| * resource array. Each item in this |
| * array is struct cam_isp_resource |
| * |
| */ |
| struct cam_isp_acquire_dev_cmd { |
| int32_t session_handle; |
| int32_t dev_handle; |
| uint32_t num_resources; |
| uint32_t handle_type; |
| uint64_t resource_hdl; |
| }; |
| |
| #endif /* __UAPI_CAM_ISP_H__ */ |
