| /* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #ifndef BTFM_SLIM_WCN3990_H |
| #define BTFM_SLIM_WCN3990_H |
| //#ifdef CONFIG_BTFM_SLIM_WCN3990 |
| #include "btfm_slim.h" |
| |
| /* Registers Address */ |
| #define CHRK_SB_COMP_TEST 0x00000000 |
| #define CHRK_SB_SLAVE_HW_REV_MSB 0x00000001 |
| #define CHRK_SB_SLAVE_HW_REV_LSB 0x00000002 |
| #define CHRK_SB_DEBUG_FEATURES 0x00000005 |
| #define CHRK_SB_INTF_INT_EN 0x00000010 |
| #define CHRK_SB_INTF_INT_STATUS 0x00000011 |
| #define CHRK_SB_INTF_INT_CLR 0x00000012 |
| #define CHRK_SB_FRM_CFG 0x00000013 |
| #define CHRK_SB_FRM_STATUS 0x00000014 |
| #define CHRK_SB_FRM_INT_EN 0x00000015 |
| #define CHRK_SB_FRM_INT_STATUS 0x00000016 |
| #define CHRK_SB_FRM_INT_CLR 0x00000017 |
| #define CHRK_SB_FRM_WAKEUP 0x00000018 |
| #define CHRK_SB_FRM_CLKCTL_DONE 0x00000019 |
| #define CHRK_SB_FRM_IE_STATUS 0x0000001A |
| #define CHRK_SB_FRM_VE_STATUS 0x0000001B |
| #define CHRK_SB_PGD_TX_CFG_STATUS 0x00000020 |
| #define CHRK_SB_PGD_RX_CFG_STATUS 0x00000021 |
| #define CHRK_SB_PGD_DEV_INT_EN 0x00000022 |
| #define CHRK_SB_PGD_DEV_INT_STATUS 0x00000023 |
| #define CHRK_SB_PGD_DEV_INT_CLR 0x00000024 |
| #define CHRK_SB_PGD_PORT_INT_EN_RX_0 0x00000030 |
| #define CHRK_SB_PGD_PORT_INT_EN_RX_1 0x00000031 |
| #define CHRK_SB_PGD_PORT_INT_EN_TX_0 0x00000032 |
| #define CHRK_SB_PGD_PORT_INT_EN_TX_1 0x00000033 |
| #define CHRK_SB_PGD_PORT_INT_STATUS_RX_0 0x00000034 |
| #define CHRK_SB_PGD_PORT_INT_STATUS_RX_1 0x00000035 |
| #define CHRK_SB_PGD_PORT_INT_STATUS_TX_0 0x00000036 |
| #define CHRK_SB_PGD_PORT_INT_STATUS_TX_1 0x00000037 |
| #define CHRK_SB_PGD_PORT_INT_CLR_RX_0 0x00000038 |
| #define CHRK_SB_PGD_PORT_INT_CLR_RX_1 0x00000039 |
| #define CHRK_SB_PGD_PORT_INT_CLR_TX_0 0x0000003A |
| #define CHRK_SB_PGD_PORT_INT_CLR_TX_1 0x0000003B |
| #define CHRK_SB_PGD_PORT_RX_CFGN(n) (0x00000040 + n) |
| #define CHRK_SB_PGD_PORT_TX_CFGN(n) (0x00000050 + n) |
| #define CHRK_SB_PGD_PORT_INT_RX_SOURCEN(n) (0x00000060 + n) |
| #define CHRK_SB_PGD_PORT_INT_TX_SOURCEN(n) (0x00000070 + n) |
| #define CHRK_SB_PGD_PORT_RX_STATUSN(n) (0x00000080 + n) |
| #define CHRK_SB_PGD_PORT_TX_STATUSN(n) (0x00000090 + n) |
| #define CHRK_SB_PGD_TX_PORTn_MULTI_CHNL_0(n) (0x00000100 + 0x4*n) |
| #define CHRK_SB_PGD_TX_PORTn_MULTI_CHNL_1(n) (0x00000101 + 0x4*n) |
| #define CHRK_SB_PGD_RX_PORTn_MULTI_CHNL_0(n) (0x00000180 + 0x4*n) |
| #define CHRK_SB_PGD_RX_PORTn_MULTI_CHNL_1(n) (0x00000181 + 0x4*n) |
| #define CHRK_SB_PGD_PORT_TX_OR_UR_CFGN(n) (0x000001F0 + n) |
| |
| /* Register Bit Setting */ |
| #define CHRK_ENABLE_OVERRUN_AUTO_RECOVERY (0x1 << 1) |
| #define CHRK_ENABLE_UNDERRUN_AUTO_RECOVERY (0x1 << 0) |
| #define CHRK_SB_PGD_PORT_ENABLE (0x1 << 0) |
| #define CHRK_SB_PGD_PORT_DISABLE (0x0 << 0) |
| #define CHRK_SB_PGD_PORT_WM_L1 (0x1 << 1) |
| #define CHRK_SB_PGD_PORT_WM_L2 (0x2 << 1) |
| #define CHRK_SB_PGD_PORT_WM_L3 (0x3 << 1) |
| #define CHRK_SB_PGD_PORT_WM_L8 (0x8 << 1) |
| #define CHRK_SB_PGD_PORT_WM_LB (0xB << 1) |
| |
| #define CHRK_SB_PGD_PORT_RX_NUM 16 |
| #define CHRK_SB_PGD_PORT_TX_NUM 16 |
| |
| /* PGD Port Map */ |
| #define CHRK_SB_PGD_PORT_TX_SCO 0 |
| #define CHRK_SB_PGD_PORT_TX1_FM 1 |
| #define CHRK_SB_PGD_PORT_TX2_FM 2 |
| #define CHRK_SB_PGD_PORT_RX_SCO 16 |
| #define CHRK_SB_PGD_PORT_RX_A2P 17 |
| |
| |
| /* Function Prototype */ |
| |
| /* |
| * btfm_slim_chrk_hw_init: Initialize wcn3990 specific slimbus slave device |
| * @btfmslim: slimbus slave device data pointer. |
| * Returns: |
| * 0: Success |
| * else: Fail |
| */ |
| int btfm_slim_chrk_hw_init(struct btfmslim *btfmslim); |
| |
| /* |
| * btfm_slim_chrk_enable_rxport: Enable wcn3990 Rx port by given port number |
| * @btfmslim: slimbus slave device data pointer. |
| * @portNum: slimbus slave port number to enable |
| * @rxport: rxport or txport |
| * @enable: enable port or disable port |
| * Returns: |
| * 0: Success |
| * else: Fail |
| */ |
| int btfm_slim_chrk_enable_port(struct btfmslim *btfmslim, uint8_t portNum, |
| uint8_t rxport, uint8_t enable); |
| |
| /* Specific defines for wcn3990 slimbus device */ |
| #define WCN3990_SLIM_REG_OFFSET 0x0800 |
| |
| #ifdef SLIM_SLAVE_REG_OFFSET |
| #undef SLIM_SLAVE_REG_OFFSET |
| #define SLIM_SLAVE_REG_OFFSET WCN3990_SLIM_REG_OFFSET |
| #endif |
| |
| /* Assign vendor specific function */ |
| extern struct btfmslim_ch wcn3990_txport[]; |
| extern struct btfmslim_ch wcn3990_rxport[]; |
| |
| #ifdef SLIM_SLAVE_RXPORT |
| #undef SLIM_SLAVE_RXPORT |
| #define SLIM_SLAVE_RXPORT (&wcn3990_rxport[0]) |
| #endif |
| |
| #ifdef SLIM_SLAVE_TXPORT |
| #undef SLIM_SLAVE_TXPORT |
| #define SLIM_SLAVE_TXPORT (&wcn3990_txport[0]) |
| #endif |
| |
| #ifdef SLIM_SLAVE_INIT |
| #undef SLIM_SLAVE_INIT |
| #define SLIM_SLAVE_INIT btfm_slim_chrk_hw_init |
| #endif |
| |
| #ifdef SLIM_SLAVE_PORT_EN |
| #undef SLIM_SLAVE_PORT_EN |
| #define SLIM_SLAVE_PORT_EN btfm_slim_chrk_enable_port |
| #endif |
| //#endif /* CONFIG_BTFM_WCN3990 */ |
| #endif /* BTFM_SLIM_WCN3990_H */ |
