| menu "Kernel hacking" |
| |
| source "lib/Kconfig.debug" |
| |
| config STRICT_DEVMEM |
| bool "Filter access to /dev/mem" |
| depends on MMU |
| ---help--- |
| If this option is disabled, you allow userspace (root) access to all |
| of memory, including kernel and userspace memory. Accidental |
| access to this is obviously disastrous, but specific access can |
| be used by people debugging the kernel. |
| |
| If this option is switched on, the /dev/mem file only allows |
| userspace access to memory mapped peripherals. |
| |
| If in doubt, say Y. |
| |
| # RMK wants arm kernels compiled with frame pointers or stack unwinding. |
| # If you know what you are doing and are willing to live without stack |
| # traces, you can get a slightly smaller kernel by setting this option to |
| # n, but then RMK will have to kill you ;). |
| config FRAME_POINTER |
| bool |
| depends on !THUMB2_KERNEL |
| default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER |
| help |
| If you say N here, the resulting kernel will be slightly smaller and |
| faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, |
| when a problem occurs with the kernel, the information that is |
| reported is severely limited. |
| |
| config ARM_UNWIND |
| bool "Enable stack unwinding support (EXPERIMENTAL)" |
| depends on AEABI |
| default y |
| help |
| This option enables stack unwinding support in the kernel |
| using the information automatically generated by the |
| compiler. The resulting kernel image is slightly bigger but |
| the performance is not affected. Currently, this feature |
| only works with EABI compilers. If unsure say Y. |
| |
| config OLD_MCOUNT |
| bool |
| depends on FUNCTION_TRACER && FRAME_POINTER |
| default y |
| |
| config DEBUG_USER |
| bool "Verbose user fault messages" |
| help |
| When a user program crashes due to an exception, the kernel can |
| print a brief message explaining what the problem was. This is |
| sometimes helpful for debugging but serves no purpose on a |
| production system. Most people should say N here. |
| |
| In addition, you need to pass user_debug=N on the kernel command |
| line to enable this feature. N consists of the sum of: |
| |
| 1 - undefined instruction events |
| 2 - system calls |
| 4 - invalid data aborts |
| 8 - SIGSEGV faults |
| 16 - SIGBUS faults |
| |
| # These options are only for real kernel hackers who want to get their hands dirty. |
| config DEBUG_LL |
| bool "Kernel low-level debugging functions (read help!)" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here to include definitions of printascii, printch, printhex |
| in the kernel. This is helpful if you are debugging code that |
| executes before the console is initialized. |
| |
| Note that selecting this option will limit the kernel to a single |
| UART definition, as specified below. Attempting to boot the kernel |
| image on a different platform *will not work*, so this option should |
| not be enabled for kernels that are intended to be portable. |
| |
| choice |
| prompt "Kernel low-level debugging port" |
| depends on DEBUG_LL |
| |
| config AT91_DEBUG_LL_DBGU0 |
| bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" |
| depends on HAVE_AT91_DBGU0 |
| |
| config AT91_DEBUG_LL_DBGU1 |
| bool "Kernel low-level debugging on 9263 and 9g45" |
| depends on HAVE_AT91_DBGU1 |
| |
| config DEBUG_BCM2835 |
| bool "Kernel low-level debugging on BCM2835 PL011 UART" |
| depends on ARCH_BCM2835 |
| |
| config DEBUG_CLPS711X_UART1 |
| bool "Kernel low-level debugging messages via UART1" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on these devices. |
| |
| config DEBUG_CLPS711X_UART2 |
| bool "Kernel low-level debugging messages via UART2" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on these devices. |
| |
| config DEBUG_CNS3XXX |
| bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" |
| depends on ARCH_CNS3XXX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the CNS3xxx UART0. |
| |
| config DEBUG_DAVINCI_DA8XX_UART1 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART1" |
| depends on ARCH_DAVINCI_DA8XX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DA8XX_UART2 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART2" |
| depends on ARCH_DAVINCI_DA8XX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART2 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DMx_UART0 |
| bool "Kernel low-level debugging on DaVinci DMx using UART0" |
| depends on ARCH_DAVINCI_DMx |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 serial port on DaVinci DMx devices. |
| |
| config DEBUG_DAVINCI_TNETV107X_UART1 |
| bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" |
| depends on ARCH_DAVINCI_TNETV107X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci TNETV107X |
| devices. |
| |
| config DEBUG_ZYNQ_UART0 |
| bool "Kernel low-level debugging on Xilinx Zynq using UART0" |
| depends on ARCH_ZYNQ |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 on the Zynq platform. |
| |
| config DEBUG_ZYNQ_UART1 |
| bool "Kernel low-level debugging on Xilinx Zynq using UART1" |
| depends on ARCH_ZYNQ |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 on the Zynq platform. |
| |
| If you have a ZC702 board and want early boot messages to |
| appear on the USB serial adaptor, select this option. |
| |
| config DEBUG_DC21285_PORT |
| bool "Kernel low-level debugging messages via footbridge serial port" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port in the DC21285 (Footbridge). |
| |
| config DEBUG_FOOTBRIDGE_COM1 |
| bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the 8250 at PCI COM1. |
| |
| config DEBUG_HIGHBANK_UART |
| bool "Kernel low-level debugging messages via Highbank UART" |
| depends on ARCH_HIGHBANK |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the UART on Highbank based devices. |
| |
| config DEBUG_IMX1_UART |
| bool "i.MX1 Debug UART" |
| depends on SOC_IMX1 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX1. |
| |
| config DEBUG_IMX23_UART |
| bool "i.MX23 Debug UART" |
| depends on SOC_IMX23 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX23. |
| |
| config DEBUG_IMX25_UART |
| bool "i.MX25 Debug UART" |
| depends on SOC_IMX25 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX25. |
| |
| config DEBUG_IMX21_IMX27_UART |
| bool "i.MX21 and i.MX27 Debug UART" |
| depends on SOC_IMX21 || SOC_IMX27 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX21 or i.MX27. |
| |
| config DEBUG_IMX28_UART |
| bool "i.MX28 Debug UART" |
| depends on SOC_IMX28 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX28. |
| |
| config DEBUG_IMX31_UART |
| bool "i.MX31 Debug UART" |
| depends on SOC_IMX31 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX31. |
| |
| config DEBUG_IMX35_UART |
| bool "i.MX35 Debug UART" |
| depends on SOC_IMX35 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX35. |
| |
| config DEBUG_IMX51_UART |
| bool "i.MX51 Debug UART" |
| depends on SOC_IMX51 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX51. |
| |
| config DEBUG_IMX53_UART |
| bool "i.MX53 Debug UART" |
| depends on SOC_IMX53 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX53. |
| |
| config DEBUG_IMX6Q_UART |
| bool "i.MX6Q/DL Debug UART" |
| depends on SOC_IMX6Q |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6Q/DL. |
| |
| config DEBUG_MMP_UART2 |
| bool "Kernel low-level debugging message via MMP UART2" |
| depends on ARCH_MMP |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MMP UART2. |
| |
| config DEBUG_MMP_UART3 |
| bool "Kernel low-level debugging message via MMP UART3" |
| depends on ARCH_MMP |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MMP UART3. |
| |
| config DEBUG_MVEBU_UART |
| bool "Kernel low-level debugging messages via MVEBU UART" |
| depends on ARCH_MVEBU |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MVEBU based platforms. |
| |
| config DEBUG_NOMADIK_UART |
| bool "Kernel low-level debugging messages via NOMADIK UART" |
| depends on ARCH_NOMADIK |
| help |
| Say Y here if you want kernel low-level debugging support |
| on NOMADIK based platforms. |
| |
| config DEBUG_OMAP2PLUS_UART |
| bool "Kernel low-level debugging messages via OMAP2PLUS UART" |
| depends on ARCH_OMAP2PLUS |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP2PLUS based platforms. |
| |
| config DEBUG_PICOXCELL_UART |
| depends on ARCH_PICOXCELL |
| bool "Use PicoXcell UART for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on PicoXcell based platforms. |
| |
| config DEBUG_PXA_UART1 |
| depends on ARCH_PXA |
| bool "Use PXA UART1 for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on PXA UART1. |
| |
| config DEBUG_REALVIEW_STD_PORT |
| bool "RealView Default UART" |
| depends on ARCH_REALVIEW |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on RealView EB, PB11MP, PBA8 |
| and PBX platforms. |
| |
| config DEBUG_REALVIEW_PB1176_PORT |
| bool "RealView PB1176 UART" |
| depends on MACH_REALVIEW_PB1176 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the standard serial port on the RealView |
| PB1176 platform. |
| |
| config DEBUG_S3C_UART0 |
| depends on PLAT_SAMSUNG |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| bool "Use S3C UART 0 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 0. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART1 |
| depends on PLAT_SAMSUNG |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| bool "Use S3C UART 1 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 1. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART2 |
| depends on PLAT_SAMSUNG |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| bool "Use S3C UART 2 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 2. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART3 |
| depends on PLAT_SAMSUNG && ARCH_EXYNOS |
| select DEBUG_EXYNOS_UART |
| bool "Use S3C UART 3 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 3. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_SOCFPGA_UART |
| depends on ARCH_SOCFPGA |
| bool "Use SOCFPGA UART for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SOCFPGA based platforms. |
| |
| config DEBUG_SUNXI_UART0 |
| bool "Kernel low-level debugging messages via sunXi UART0" |
| depends on ARCH_SUNXI |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A1X based platforms on the UART0. |
| |
| config DEBUG_SUNXI_UART1 |
| bool "Kernel low-level debugging messages via sunXi UART1" |
| depends on ARCH_SUNXI |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A1X based platforms on the UART1. |
| |
| config DEBUG_TEGRA_UART |
| depends on ARCH_TEGRA |
| bool "Use Tegra UART for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config DEBUG_SIRFPRIMA2_UART1 |
| bool "Kernel low-level debugging messages via SiRFprimaII UART1" |
| depends on ARCH_PRIMA2 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the uart1 port on SiRFprimaII devices. |
| |
| config DEBUG_SIRFMARCO_UART1 |
| bool "Kernel low-level debugging messages via SiRFmarco UART1" |
| depends on ARCH_MARCO |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the uart1 port on SiRFmarco devices. |
| |
| config DEBUG_UX500_UART |
| depends on ARCH_U8500 |
| bool "Use Ux500 UART for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Ux500 based platforms. |
| |
| config DEBUG_VEXPRESS_UART0_DETECT |
| bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" |
| depends on ARCH_VEXPRESS && CPU_CP15_MMU |
| help |
| This option enables a simple heuristic which tries to determine |
| the motherboard's memory map variant (original or RS1) and then |
| choose the relevant UART0 base address. |
| |
| Note that this will only work with standard A-class core tiles, |
| and may fail with non-standard SMM or custom software models. |
| |
| config DEBUG_VEXPRESS_UART0_CA9 |
| bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" |
| depends on ARCH_VEXPRESS |
| help |
| This option selects UART0 at 0x10009000. Except for custom models, |
| this applies only to the V2P-CA9 tile. |
| |
| config DEBUG_VEXPRESS_UART0_RS1 |
| bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" |
| depends on ARCH_VEXPRESS |
| help |
| This option selects UART0 at 0x1c090000. This applies to most |
| of the tiles using the RS1 memory map, including all new A-class |
| core tiles, FPGA-based SMMs and software models. |
| |
| config DEBUG_VT8500_UART0 |
| bool "Use UART0 on VIA/Wondermedia SoCs" |
| depends on ARCH_VT8500 |
| help |
| This option selects UART0 on VIA/Wondermedia System-on-a-chip |
| devices, including VT8500, WM8505, WM8650 and WM8850. |
| |
| config DEBUG_LL_UART_NONE |
| bool "No low-level debugging UART" |
| depends on !ARCH_MULTIPLATFORM |
| help |
| Say Y here if your platform doesn't provide a UART option |
| below. This relies on your platform choosing the right UART |
| definition internally in order for low-level debugging to |
| work. |
| |
| config DEBUG_ICEDCC |
| bool "Kernel low-level debugging via EmbeddedICE DCC channel" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the EmbeddedICE macrocell's DCC channel using |
| co-processor 14. This is known to work on the ARM9 style ICE |
| channel and on the XScale with the PEEDI. |
| |
| Note that the system will appear to hang during boot if there |
| is nothing connected to read from the DCC. |
| |
| config DEBUG_SEMIHOSTING |
| bool "Kernel low-level debug output via semihosting I/O" |
| help |
| Semihosting enables code running on an ARM target to use |
| the I/O facilities on a host debugger/emulator through a |
| simple SVC call. The host debugger or emulator must have |
| semihosting enabled for the special svc call to be trapped |
| otherwise the kernel will crash. |
| |
| This is known to work with OpenOCD, as well as |
| ARM's Fast Models, or any other controlling environment |
| that implements semihosting. |
| |
| For more details about semihosting, please see |
| chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. |
| |
| endchoice |
| |
| config DEBUG_EXYNOS_UART |
| bool |
| |
| config DEBUG_IMX_UART_PORT |
| int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ |
| DEBUG_IMX25_UART || \ |
| DEBUG_IMX21_IMX27_UART || \ |
| DEBUG_IMX31_UART || \ |
| DEBUG_IMX35_UART || \ |
| DEBUG_IMX51_UART || \ |
| DEBUG_IMX53_UART || \ |
| DEBUG_IMX6Q_UART |
| default 1 |
| depends on ARCH_MXC |
| help |
| Choose UART port on which kernel low-level debug messages |
| should be output. |
| |
| choice |
| prompt "Low-level debug console UART" |
| depends on DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_OMAP2UART1 |
| bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" |
| help |
| This covers at least h4, 2430sdp, 3430sdp, 3630sdp, |
| omap3 torpedo and 3530 lv som. |
| |
| config DEBUG_OMAP2UART2 |
| bool "OMAP2/3/4 UART2" |
| |
| config DEBUG_OMAP2UART3 |
| bool "OMAP2 UART3 (n8x0)" |
| |
| config DEBUG_OMAP3UART3 |
| bool "OMAP3 UART3 (most omap3 boards)" |
| help |
| This covers at least cm_t3x, beagle, crane, devkit8000, |
| igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, |
| and 3517evm. |
| |
| config DEBUG_OMAP4UART3 |
| bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" |
| |
| config DEBUG_OMAP3UART4 |
| bool "OMAP36XX UART4" |
| |
| config DEBUG_OMAP4UART4 |
| bool "OMAP4/5 UART4" |
| |
| config DEBUG_TI81XXUART1 |
| bool "TI81XX UART1 (ti8148evm)" |
| |
| config DEBUG_TI81XXUART2 |
| bool "TI81XX UART2" |
| |
| config DEBUG_TI81XXUART3 |
| bool "TI81XX UART3 (ti8168evm)" |
| |
| config DEBUG_AM33XXUART1 |
| bool "AM33XX UART1" |
| |
| config DEBUG_ZOOM_UART |
| bool "Zoom2/3 UART" |
| endchoice |
| |
| choice |
| prompt "Low-level debug console UART" |
| depends on DEBUG_LL && DEBUG_TEGRA_UART |
| |
| config TEGRA_DEBUG_UART_AUTO_ODMDATA |
| bool "Via ODMDATA" |
| help |
| Automatically determines which UART to use for low-level debug based |
| on the ODMDATA value. This value is part of the BCT, and is written |
| to the boot memory device using nvflash, or other flashing tool. |
| When bits 19:18 are 3, then bits 17:15 indicate which UART to use; |
| 0/1/2/3/4 are UART A/B/C/D/E. |
| |
| config TEGRA_DEBUG_UARTA |
| bool "UART A" |
| |
| config TEGRA_DEBUG_UARTB |
| bool "UART B" |
| |
| config TEGRA_DEBUG_UARTC |
| bool "UART C" |
| |
| config TEGRA_DEBUG_UARTD |
| bool "UART D" |
| |
| config TEGRA_DEBUG_UARTE |
| bool "UART E" |
| |
| endchoice |
| |
| config DEBUG_LL_INCLUDE |
| string |
| default "debug/bcm2835.S" if DEBUG_BCM2835 |
| default "debug/cns3xxx.S" if DEBUG_CNS3XXX |
| default "debug/exynos.S" if DEBUG_EXYNOS_UART |
| default "debug/highbank.S" if DEBUG_HIGHBANK_UART |
| default "debug/icedcc.S" if DEBUG_ICEDCC |
| default "debug/imx.S" if DEBUG_IMX1_UART || \ |
| DEBUG_IMX25_UART || \ |
| DEBUG_IMX21_IMX27_UART || \ |
| DEBUG_IMX31_UART || \ |
| DEBUG_IMX35_UART || \ |
| DEBUG_IMX51_UART || \ |
| DEBUG_IMX53_UART ||\ |
| DEBUG_IMX6Q_UART |
| default "debug/mvebu.S" if DEBUG_MVEBU_UART |
| default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART |
| default "debug/nomadik.S" if DEBUG_NOMADIK_UART |
| default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART |
| default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART |
| default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ |
| DEBUG_MMP_UART3 |
| default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 |
| default "debug/socfpga.S" if DEBUG_SOCFPGA_UART |
| default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 |
| default "debug/tegra.S" if DEBUG_TEGRA_UART |
| default "debug/ux500.S" if DEBUG_UX500_UART |
| default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ |
| DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 |
| default "debug/vt8500.S" if DEBUG_VT8500_UART0 |
| default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 |
| default "mach/debug-macro.S" |
| |
| config DEBUG_UNCOMPRESS |
| bool |
| default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ |
| !DEBUG_OMAP2PLUS_UART && \ |
| !DEBUG_TEGRA_UART |
| |
| config UNCOMPRESS_INCLUDE |
| string |
| default "debug/uncompress.h" if ARCH_MULTIPLATFORM |
| default "mach/uncompress.h" |
| |
| config EARLY_PRINTK |
| bool "Early printk" |
| depends on DEBUG_LL |
| help |
| Say Y here if you want to have an early console using the |
| kernel low-level debugging functions. Add earlyprintk to your |
| kernel parameters to enable this console. |
| |
| config OC_ETM |
| bool "On-chip ETM and ETB" |
| depends on ARM_AMBA |
| help |
| Enables the on-chip embedded trace macrocell and embedded trace |
| buffer driver that will allow you to collect traces of the |
| kernel code. |
| |
| config ARM_KPROBES_TEST |
| tristate "Kprobes test module" |
| depends on KPROBES && MODULES |
| help |
| Perform tests of kprobes API and instruction set simulation. |
| |
| comment "Samsung Debugging Feature" |
| menuconfig SEC_DEBUG |
| bool "Samsung TN Ramdump Feature" |
| default n |
| help |
| Samsung TN Ramdump Feature. |
| Enables collection of ram dump. |
| Enables task history, debug level etc. |
| This feature is enabled in defconfig. |
| |
| if SEC_DEBUG |
| config SEC_DEBUG_SCHED_LOG |
| bool "Samsung Scheduler Logging Feature" |
| default n |
| help |
| Samsung Scheduler Logging Feature for Debug use. |
| Enables task scheduling history. |
| Enables IRQ scheduling history. |
| This feature is enabled in defconfig. |
| |
| config SEC_DEBUG_SEMAPHORE_LOG |
| bool "Samsung Semaphore Logging Feature" |
| default n |
| help |
| Samsung Semaphore Logging Feature for Debug use. |
| Enables semaphore debugging statistics. |
| Enables logging. |
| This feature is enabled in defconfig. |
| |
| config SEC_FILE_LEAK_DEBUG |
| bool "Samsung File Leak Debugging Feature" |
| default n |
| help |
| Enable the file fd tracking. |
| Samsung File Leak Debugging Feature for Debug use. |
| Enables the forced panic mode when EMFILE Eror occurs. |
| This feature is enabled in defconfig. |
| |
| config SEC_LOGGER_BUFFER_EXPANSION |
| bool "Samsung Logger Buffer Expansion Feature" |
| default n |
| help |
| This is used to expand buffers of logger. |
| This feature is enabled in defconfig. |
| expands the log buffer usage. |
| sec debug feature. |
| |
| config SEC_LOGGER_BUFFER_EXPANSION_SIZE |
| int "Samsung Logger Buffer Expansion Size(MB)" |
| depends on SEC_LOGGER_BUFFER_EXPANSION |
| default 2 |
| help |
| sec logger feature. |
| depends on sec debug feature. |
| This is used to expand. |
| main buffer of logger(MB). |
| |
| endif |
| |
| config SEC_FORKHANG_DEBUG |
| bool "Debug Feature for Newly Forked task getting HANg on mmap_sem down_read()" |
| default n |
| help |
| mmap_sem writer lock logging for ram dump analysis. |
| Collects kernel debug log. |
| Log is collected in the no-cache area. |
| This feature is enabled in defconfig. |
| |
| config SEC_DEBUG_USER |
| bool "Panic on Userspace fault" |
| default y |
| help |
| Panic on Userspace fault |
| This feature enables collection of ram dump, |
| on user fault. |
| Enabled native code debugging. |
| |
| config SEC_DEBUG_IRQ_EXIT_LOG |
| bool "Temporary Logging for IRQ delay" |
| default n |
| help |
| Verbose Logging for IRQ delay. |
| Helps indetification of irq enter and exit. |
| This is to track the current state of IRQ execution. |
| This is enabled in defconfig file. |
| |
| config SEC_DEBUG_MSG_LOG |
| bool "Message Log for ram dump debug" |
| default n |
| help |
| Verbose Logging for ram dump analysis. |
| Collects kernel debug log. |
| Log is collected in the no-cache area. |
| This feature is enabled in defconfig. |
| |
| config SEC_DEBUG_SUBSYS |
| bool "Debug subsystems" |
| default n |
| help |
| Subsystems debug feature. |
| When enabled provides kernel logs, modem logs, RPM registers, |
| Schedule and IRQ logs at the time of crash along with the |
| reason for crash, which can be extracted as a html in RAM dump mode. |
| |
| config SEC_DEBUG_DCVS_LOG |
| bool "Temporary Logging for DCVS" |
| default n |
| help |
| DCVS Logging Feature for Debug use. |
| The ACPU clock rate changes will be logged as a part |
| of secdbg_log structure along with the CPU time stamp. |
| The previous frequency and the new frequency for both the CPU along |
| with the CPU time stamp will be logged. |
| |
| config SEC_DEBUG_FUELGAUGE_LOG |
| bool "Temporary Logging for FuelGauge" |
| default n |
| help |
| FuelGauge Logging Feature for Debug use. |
| The FuelGauge values are logged as a part |
| of secdbg_log structure along with the CPU time stamp. |
| The voltage and soc values along with the CPU time will be logged. |
| |
| config SEC_DEBUG_LOW_LOG |
| bool "Kernel Message Logging for Debug Level Low" |
| default n |
| help |
| Kernel Message Logging Feature for Debug use. |
| The Kernel Messages are logged using file I/O |
| when an exception occurs, when the debug level is low. |
| The file I/O is added in kernel driver level |
| so that kernel messages are logged on next reboot. |
| |
| config SEC_DEBUG_MDM_FILE_INFO |
| bool "MDM filename and line number in UPLOAD mode" |
| default n |
| help |
| This feature enables display of MDM info in upload mode. |
| This feature enabled SSR in debug level low. |
| Collects MDM ram dump and then calls panic. |
| UPLOAD mode has MDM dump info to show it on LCD. |
| |
| config SEC_DEBUG_DOUBLE_FREE |
| bool "Enable double free detection" |
| default n |
| help |
| Detect erraneous codes that frees a kmalloced node |
| twice. When kfree(p) is called, p is not freed right away. |
| Instead, it is pushed into a circular buffer. What it frees |
| is the oldest pointer that was pushed into the buffer. |
| If someone tries to free the same pointer p, *p |
| is read and checked for a magic code that is written |
| when it was first freed. If it matches, the whole |
| circular buffer is searched. Panic is be called when |
| the match is found. |
| |
| config SEC_LOG_LAST_KMSG |
| bool "Enable /proc/last_kmsg support: if EMBEDDED" |
| default n |
| help |
| depends on sec debug. |
| for getting the last kernel logs. |
| mostly used while debug is low. |
| This option enables /proc/last_kmsg support. |
| |
| config SEC_DEBUG_NOCACHE_LOG_IN_LEVEL_LOW |
| bool "Enable nocache logging in debug level LOW" |
| default n |
| help |
| Mostly used while debug is low. |
| effective for cracking market issues. |
| depends on sec debug. |
| Enable nocache logging in debug level LOW. |
| |
| config SEC_MONITOR_BATTERY_REMOVAL |
| bool "Enable monitering whether normal power sequence or not" |
| default n |
| help |
| sec debug. |
| this feature is used for monitoring the battery removal. |
| some sandbox devices doesn't fit battery properly. |
| Enable monitering Power off & battery removal. |
| endmenu |
| |
| comment "PowerManagement Feature" |
| menuconfig SEC_PM |
| bool "Samsung TN PowerManagement Feature" |
| default y |
| help |
| samsung power managment debug feature. |
| Samsung TN PowerManagement Feature. |
| |
| if SEC_PM |
| config SEC_PM_DEBUG |
| bool "Samsung TN PowerManagement Debug Feature" |
| default n |
| help |
| Samsung TN PowerManagement Debug Feature. |
| |
| endif |
| |
| config PID_IN_CONTEXTIDR |
| bool "Write the current PID to the CONTEXTIDR register" |
| depends on CPU_COPY_V6 |
| help |
| Enabling this option causes the kernel to write the current PID to |
| the PROCID field of the CONTEXTIDR register, at the expense of some |
| additional instructions during context switch. Say Y here only if you |
| are planning to use hardware trace tools with this kernel. |
| |
| config DEBUG_SET_MODULE_RONX |
| bool "Set loadable kernel module data as NX and text as RO" |
| depends on MODULES |
| ---help--- |
| This option helps catch unintended modifications to loadable |
| kernel module's text and read-only data. It also prevents execution |
| of module data. Such protection may interfere with run-time code |
| patching and dynamic kernel tracing - and they might also protect |
| against certain classes of kernel exploits. |
| If in doubt, say "N". |
| |
| config RESTART_REASON_DDR |
| bool "Save restart reason in DDR reserved area" |
| default n |
| help |
| Sometimes IMEM doesn't servive the power cycle. |
| This comes in handy backup in those cases. |
| ususally not enabled by default. |
| Do not enabled unless there is strong reason to do so. |
