| /* Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| |
| &soc { |
| /* RPMh regulators */ |
| /* pm6150 S3 - VDD_MX supply */ |
| rpmh-regulator-mxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mx.lvl"; |
| |
| VDD_MX_LEVEL: |
| S3A_LEVEL: pm6150_s3_level: regulator-pm6150-s3 { |
| regulator-name = "pm6150_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MX_LEVEL_AO: |
| S3A_LEVEL_AO: pm6150_s3_level_ao: regulator-pm6150-s3-level-ao { |
| regulator-name = "pm6150_s3_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| mx_cdev: mx-cdev-lvl { |
| compatible = "qcom,regulator-cooling-device"; |
| regulator-cdev-supply = <&VDD_MX_LEVEL>; |
| regulator-levels = <RPMH_REGULATOR_LEVEL_NOM |
| RPMH_REGULATOR_LEVEL_OFF>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| /* pm6150 S1 - VDD_CX supply */ |
| rpmh-regulator-cxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "cx.lvl"; |
| pm6150_s1_level-parent-supply = <&VDD_MX_LEVEL>; |
| pm6150_s1_level_ao-parent-supply = <&VDD_MX_LEVEL_AO>; |
| |
| VDD_CX_LEVEL: |
| S1A_LEVEL: pm6150_s1_level: regulator-pm6150-s1 { |
| regulator-name = "pm6150_s1_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| VDD_CX_LEVEL_AO: |
| S1A_LEVEL_AO: pm6150_s1_level_ao: regulator-pm6150-s1-level-ao { |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-name = "pm6150_s1_level_ao"; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| cx_cdev: regulator-cdev { |
| compatible = "qcom,rpmh-reg-cdev"; |
| mboxes = <&qmp_aop 0>; |
| qcom,reg-resource-name = "cx"; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| |
| rpmh-regulator-smpc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc1"; |
| S1C: pm6150l_s1: regulator-pm6150l-s1 { |
| regulator-name = "pm6150l_s1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1128000>; |
| regulator-max-microvolt = <1128000>; |
| qcom,init-voltage = <1128000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc2"; |
| S2C: pm6150l_s2: regulator-pm6150l-s2 { |
| regulator-name = "pm6150l_s2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <348000>; |
| regulator-max-microvolt = <648000>; |
| qcom,init-voltage = <348000>; |
| }; |
| }; |
| |
| /* pm6150l S7 - VDD_MSS supply */ |
| rpmh-regulator-modemlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mss.lvl"; |
| |
| VDD_MSS_LEVEL: |
| S7C_LEVEL: pm6150l_s7_level: regulator-pm6150l-s7 { |
| regulator-name = "pm6150l_s7_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc8"; |
| S8C: pm6150l_s8: regulator-pm6150l-s8 { |
| regulator-name = "pm6150l_s8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1400000>; |
| qcom,init-voltage = <1200000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L1A: pm6150_l1: regulator-pm6150-l1 { |
| regulator-name = "pm6150_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1252000>; |
| qcom,init-voltage = <1200000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L2A: pm6150_l2: regulator-pm6150-l2 { |
| regulator-name = "pm6150_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1050000>; |
| qcom,init-voltage = <1000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L3A: pm6150_l3: regulator-pm6150-l3 { |
| regulator-name = "pm6150_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1060000>; |
| qcom,init-voltage = <1000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa4"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm6150_l4>; |
| L4A: pm6150_l4: regulator-pm6150-l4 { |
| regulator-name = "pm6150_l4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <875000>; |
| regulator-max-microvolt = <975000>; |
| qcom,init-voltage = <875000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <23800>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5A: pm6150_l5: regulator-pm6150-l5 { |
| regulator-name = "pm6150_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2970000>; |
| qcom,init-voltage = <2500000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L6A: pm6150_l6: regulator-pm6150-l6 { |
| regulator-name = "pm6150_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <650000>; |
| qcom,init-voltage = <600000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* pm6150 L7 - LPI_MX supply */ |
| rpmh-regulator-lmxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "lmx.lvl"; |
| L7A_LEVEL: pm6150_l7_level: regulator-pm6150-l7 { |
| regulator-name = "pm6150_l7_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* pm6150 L8 - LPI_CX supply */ |
| rpmh-regulator-lcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "lcx.lvl"; |
| L8A_LEVEL: pm6150_l8_level: regulator-pm6150-l8 { |
| regulator-name = "pm6150_l8_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* pm6150 L9 - WCSS_CX supply */ |
| rpmh-regulator-ldoa9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L9A: pm6150_l9: regulator-pm6150-l9 { |
| regulator-name = "pm6150_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <728000>; |
| qcom,init-voltage = <400000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L10A: pm6150_l10: regulator-pm6150-l10 { |
| regulator-name = "pm6150_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1829000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11A: pm6150_l11: regulator-pm6150-l11 { |
| regulator-name = "pm6150_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1890000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12A: pm6150_l12: regulator-pm6150-l12 { |
| regulator-name = "pm6150_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1950000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa13"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm6150_l13>; |
| L13A: pm6150_l13: regulator-pm6150-l13 { |
| regulator-name = "pm6150_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <115000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa14 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa14"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L14A: pm6150_l14: regulator-pm6150-l14 { |
| regulator-name = "pm6150_l14"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1850000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa15"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L15A: pm6150_l15: regulator-pm6150-l15 { |
| regulator-name = "pm6150_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L16A: pm6150_l16: regulator-pm6150-l16 { |
| regulator-name = "pm6150_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2430000>; |
| regulator-max-microvolt = <2970000>; |
| qcom,init-voltage = <2430000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa17"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L17A: pm6150_l17: regulator-pm6150-l17 { |
| regulator-name = "pm6150_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3230000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa18 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa18"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L18A: pm6150_l18: regulator-pm6150-l18 { |
| regulator-name = "pm6150_l18"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3008000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa19 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa19"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L19A: pm6150_l19: regulator-pm6150-l19 { |
| regulator-name = "pm6150_l19"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3008000>; |
| qcom,init-voltage = <2700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L1C: pm6150l_l1: regulator-pm6150l-l1 { |
| regulator-name = "pm6150l_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L2C: pm6150l_l2: regulator-pm6150l-l2 { |
| regulator-name = "pm6150l_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1304000>; |
| regulator-max-microvolt = <1304000>; |
| qcom,init-voltage = <1304000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm6150l_l3>; |
| L3C: pm6150l_l3: regulator-pm6150l-l3 { |
| regulator-name = "pm6150l_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1232000>; |
| regulator-max-microvolt = <1260000>; |
| qcom,init-voltage = <1232000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <51800>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc4"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L4C: pm6150l_l4: regulator-pm6150l-l4 { |
| regulator-name = "pm6150l_l4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <1650000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5C: pm6150l_l5: regulator-pm6150l-l5 { |
| regulator-name = "pm6150l_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <1650000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L6C: pm6150l_l6: regulator-pm6150l-l6 { |
| regulator-name = "pm6150l_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <3100000>; |
| qcom,init-voltage = <1650000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7C: pm6150l_l7: regulator-pm6150l-l7 { |
| regulator-name = "pm6150l_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc8"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L8C: pm6150l_l8: regulator-pm6150l-l8 { |
| regulator-name = "pm6150l_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L9C: pm6150l_l9: regulator-pm6150l-l9 { |
| regulator-name = "pm6150l_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <2950000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L10C: pm6150l_l10: regulator-pm6150l-l10 { |
| regulator-name = "pm6150l_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3200000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11C: pm6150l_l11: regulator-pm6150l-l11 { |
| regulator-name = "pm6150l_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <2950000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-bobc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "bobc1"; |
| qcom,regulator-type = "pmic5-bob"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_PASS |
| RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1000000 2000000>; |
| qcom,send-defaults; |
| |
| BOB: pm6150l_bob: regulator-pm6150l-bob { |
| regulator-name = "pm6150l_bob"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3296000>; |
| regulator-max-microvolt = <3960000>; |
| qcom,init-voltage = <3296000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_PASS>; |
| }; |
| |
| BOB_AO: pm6150l_bob_ao: regulator-pm6150l-bob-ao { |
| regulator-name = "pm6150l_bob_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <3296000>; |
| regulator-max-microvolt = <3960000>; |
| qcom,init-voltage = <3296000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| }; |
| }; |
