| /* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| |
| &soc { |
| /* Stub regulator */ |
| /* |
| * RPMh does not provide support for PM8195 S4 because it is always-on |
| * at 1.8 V in auto mode. Therefore, use a stub regulator for S4. |
| */ |
| S4A: pm8195_s4: regulator-pm8195-s4 { |
| compatible = "qcom,stub-regulator"; |
| regulator-name = "pm8195_s4"; |
| qcom,hpm-min-load = <100000>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| /* PM8195_1 S1 = VDD_EBI supply */ |
| rpmh-regulator-ebilvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ebi.lvl"; |
| S1A_LEVEL: pm8195_1_s1_level: regulator-pm8195-1-s1-level { |
| regulator-name = "pm8195_1_s1_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| ebi_cdev: regulator-cdev { |
| compatible = "qcom,rpmh-reg-cdev"; |
| mboxes = <&qmp_aop 0>; |
| qcom,reg-resource-name = "ebi"; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| /* PM8195_1 S2 = VDDCX_MM supply */ |
| rpmh-regulator-mmcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mmcx.lvl"; |
| |
| VDD_MMCX_LEVEL: |
| S7A_LEVEL: pm8195_1_s7_level: regulator-pm8195-1-s7-level { |
| regulator-name = "pm8195_1_s7_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MMCX_LEVEL_AO: S7A_LEVEL_AO: |
| pm8195_1_s7_level_ao: regulator-pm8195-1-s7-level-ao { |
| regulator-name = "pm8195_1_s7_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| mm_cx_cdev: mm-cx-cdev-lvl { |
| compatible = "qcom,regulator-cooling-device"; |
| regulator-cdev-supply = <&VDD_MMCX_LEVEL_AO>; |
| regulator-levels = <RPMH_REGULATOR_LEVEL_NOM |
| RPMH_REGULATOR_LEVEL_OFF>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpa3"; |
| S3A: pm8195_1_s3: regulator-pm8195-1-s3 { |
| regulator-name = "pm8195_1_s3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <788000>; |
| regulator-max-microvolt = <969000>; |
| qcom,init-voltage = <788000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpa5"; |
| S5A: pm8195_1_s5: regulator-pm8195-1-s5 { |
| regulator-name = "pm8195_1_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1000000>; |
| qcom,init-voltage = <900000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpa6"; |
| S6A: pm8195_1_s6: regulator-pm8195-1-s6 { |
| regulator-name = "pm8195_1_s6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,init-voltage = <800000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpa2"; |
| S2A: pm8195_1_s2: regulator-pm8195-1-s2 { |
| regulator-name = "pm8195_1_s2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1179000>; |
| regulator-max-microvolt = <1379000>; |
| qcom,init-voltage = <1179000>; |
| }; |
| }; |
| |
| /* pm8195_1 S8 = VDD_MODEM supply */ |
| rpmh-regulator-msslvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mss.lvl"; |
| VDD_MSS_LEVEL: |
| S8A_LEVEL: pm8195_1_s8_level: regulator-pm8195-1-s8-level { |
| regulator-name = "pm8195_1_s8_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* PM8195_1 S10 = VDD_MX supply */ |
| rpmh-regulator-mxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "mx.lvl"; |
| |
| VDD_MX_LEVEL: |
| S10A_LEVEL: pm8195_1_s10_level: regulator-pm8195-1-s10-level { |
| regulator-name = "pm8195_1_s10_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MX_LEVEL_AO: S10A_LEVEL_AO: |
| pm8195_1_s10_level_ao: regulator-pm8195-1-s10-level-ao { |
| regulator-name = "pm8195_1_s10_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| mx_cdev: mx-cdev-lvl { |
| compatible = "qcom,regulator-cooling-device"; |
| regulator-cdev-supply = <&VDD_MX_LEVEL>; |
| regulator-levels = <RPMH_REGULATOR_LEVEL_NOM |
| RPMH_REGULATOR_LEVEL_OFF>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L2A: pm8195_1_l2: regulator-pm8195-1-l2 { |
| regulator-name = "pm8195_1_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L3A: pm8195_1_l3: regulator-pm8195-1-l3 { |
| regulator-name = "pm8195_1_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <760000>; |
| regulator-max-microvolt = <816000>; |
| qcom,init-voltage = <760000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5A: pm8195_1_l5: regulator-pm8195-1-l5 { |
| regulator-name = "pm8195_1_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <880000>; |
| qcom,init-voltage = <720000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* DSI display 1.2 */ |
| rpmh-regulator-ldoa9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L9A: pm8195_1_l9: regulator-pm8195-1-l9 { |
| regulator-name = "pm8195_1_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1250000>; |
| qcom,init-voltage = <1150000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L10A: pm8195_1_l10: regulator-pm8195-1-l10 { |
| regulator-name = "pm8195_1_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| qcom,init-voltage = <2700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11A: pm8195_1_l11: regulator-pm8195-1-l11 { |
| regulator-name = "pm8195_1_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,init-voltage = <1100000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12A: pm8195_1_l12: regulator-pm8195-1-l12 { |
| regulator-name = "pm8195_1_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1890000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa13"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L13A: pm8195_1_l13: regulator-pm8195-1-l13 { |
| regulator-name = "pm8195_1_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2900000>; |
| qcom,init-voltage = <2500000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa15"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L15A: pm8195_1_l15: regulator-pm8195-1-l15 { |
| regulator-name = "pm8195_1_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1751000>; |
| qcom,init-voltage = <1700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L16A: pm8195_1_l16: regulator-pm8195-1-l16 { |
| regulator-name = "pm8195_1_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2900000>; |
| qcom,init-voltage = <2500000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| |
| rpmh-regulator-ldoa17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa17"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L17A: pm8195_1_l17: regulator-pm8195-1-l17 { |
| regulator-name = "pm8195_1_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <3544000>; |
| qcom,init-voltage = <1700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa18 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa18"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L18A: pm8195_1_l18: regulator-pm8195-1-l18 { |
| regulator-name = "pm8195_1_l18"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <831000>; |
| regulator-max-microvolt = <918000>; |
| qcom,init-voltage = <831000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc1"; |
| S1C: pm8195_2_s1: regulator-pm8195-2-s1 { |
| regulator-name = "pm8195_2_s1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <570000>; |
| regulator-max-microvolt = <648000>; |
| qcom,init-voltage = <570000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc2"; |
| S2C: pm8195_2_s2: regulator-pm8195-2-s2 { |
| regulator-name = "pm8195_2_s2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1060000>; |
| regulator-max-microvolt = <1170000>; |
| qcom,init-voltage = <1060000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc4"; |
| S4C: pm8195_2_s4: regulator-pm8195-2-s4 { |
| regulator-name = "pm8195_2_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1620000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpc5"; |
| S5C: pm8195_2_s5: regulator-pm8195-2-s5 { |
| regulator-name = "pm8195_2_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1713000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1713000>; |
| }; |
| }; |
| |
| /* PM8195_2 S10 + S9 + S8 + S7 + S6 = VDD_GFX supply */ |
| rpmh-regulator-gfxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "gfx.lvl"; |
| VDD_GFX: |
| S10C_LEVEL: pm8195_2_s10_level: regulator-pm8195-2-s10-level { |
| regulator-name = "pm8195_2_s10_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L2C: pm8195_2_l2: regulator-pm8195-2-l2 { |
| regulator-name = "pm8195_2_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3330000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5C: pm8195_2_l5: regulator-pm8195-2-l5 { |
| regulator-name = "pm8195_2_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7C: pm8195_2_l7: regulator-pm8195-2-l7 { |
| regulator-name = "pm8195_2_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L10C: pm8195_2_l10: regulator-pm8195-2-l10 { |
| regulator-name = "pm8195_2_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <1620000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11C: pm8195_2_l11: regulator-pm8195-2-l11 { |
| regulator-name = "pm8195_2_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1144000>; |
| regulator-max-microvolt = <1236000>; |
| qcom,init-voltage = <1144000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoc12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12C: pm8195_2_l12: regulator-pm8195-2-l12 { |
| regulator-name = "pm8195_2_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1900000>; |
| qcom,init-voltage = <1700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| |
| /* PM8195_3 S3 + S2 + S1 = VDD_CX supply */ |
| rpmh-regulator-cxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "cx.lvl"; |
| pm8195_3_s3_level-parent-supply = <&VDD_MX_LEVEL>; |
| pm8195_3_s3_level_ao-parent-supply = <&VDD_MX_LEVEL_AO>; |
| |
| VDD_CX_LEVEL: |
| S3E_LEVEL: pm8195_3_s3_level: regulator-pm8195-3-s3-level { |
| regulator-name = "pm8195_3_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| VDD_CX_LEVEL_AO: S3E_LEVEL_AO: |
| pm8195_3_s3_level_ao: regulator-pm8195-3-s3-level-ao { |
| regulator-name = "pm8195_3_s3_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| cx_cdev: regulator-cdev { |
| compatible = "qcom,rpmh-reg-cdev"; |
| mboxes = <&qmp_aop 0>; |
| qcom,reg-resource-name = "cx"; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| rpmh-regulator-smpe4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpe4"; |
| S4E: pm8195_3_s4: regulator-pm8195-3-s4 { |
| regulator-name = "pm8195_3_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <402000>; |
| regulator-max-microvolt = <1980000>; |
| qcom,init-voltage = <402000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpe5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "smpe5"; |
| S5E: pm8195_3_s5: regulator-pm8195-3-s5 { |
| regulator-name = "pm8195_3_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1811000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1811000>; |
| }; |
| }; |
| |
| /* PM8195_3 L4 - LPI_MX supply */ |
| rpmh-regulator-lmxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "lmx.lvl"; |
| L4E_LEVEL: pm8195_3_l4_level: regulator-pm8195-3-l4 { |
| regulator-name = "pm8195_3_l4_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoe5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5E: pm8195_3_l5: regulator-pm8195-3-l5 { |
| regulator-name = "pm8195_3_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <920000>; |
| qcom,init-voltage = <800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoe7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7E: pm8195_3_l7: regulator-pm8195-3-l7 { |
| regulator-name = "pm8195_3_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1950000>; |
| qcom,init-voltage = <1700000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* pm8195_3 L8 - LPI_CX supply */ |
| rpmh-regulator-lcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "lcx.lvl"; |
| L8E_LEVEL: pm8195_3_l8_level: regulator-pm8195-3-l8 { |
| regulator-name = "pm8195_3_l8_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoe9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L9E: pm8195_3_l9: regulator-pm8195-3-l9 { |
| regulator-name = "pm8195_3_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <830000>; |
| regulator-max-microvolt = <920000>; |
| qcom,init-voltage = <830000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoe10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L10E: pm8195_3_l10: regulator-pm8195-3-l10 { |
| regulator-name = "pm8195_3_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <3544000>; |
| qcom,init-voltage = <2500000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoe12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12E: pm8195_3_l12: regulator-pm8195-3-l12 { |
| regulator-name = "pm8195_3_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoe16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L16E: pm8195_3_l16: regulator-pm8195-3-l16 { |
| regulator-name = "pm8195_3_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2921000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <2921000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| |
| rpmh-regulator-ldoe17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| mboxes = <&apps_rsc 0>; |
| qcom,resource-name = "ldoe17"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L17E: pm8195_3_l17: regulator-pm8195-3-l17 { |
| regulator-name = "pm8195_3_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2900000>; |
| regulator-max-microvolt = <3300000>; |
| qcom,init-voltage = <2900000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| }; |
