| /* Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &qupv3_se9_i2c { |
| status = "ok"; |
| // see -qup.dtsi for clk-freq-out setting |
| pac193x@10 { |
| compatible = "microchip,pac1934"; |
| reg = <0x10>; |
| samp-rate = <8>; |
| status = "okay"; |
| |
| // pm8150_l17 is always on in AOP |
| // avdd-supply = <&pm8150_l17>; |
| // pac193x,regulator_avdd = "avdd"; |
| |
| ch1: channel@0 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PPVAR_VPH_PWR_OLED"; |
| subsys-name = "display"; |
| channel_enabled; |
| }; |
| |
| ch2: channel@1 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PPVAR_VPH_PWR_WIFI"; |
| subsys-name = "wifi"; |
| channel_enabled; |
| }; |
| |
| ch3: channel@2 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PP3300_L11C_WIFI"; |
| subsys-name = "wifi"; |
| channel_enabled; |
| }; |
| |
| ch4: channel@3 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PP3300_L10C_WIFI"; |
| subsys-name = "wifi"; |
| channel_enabled; |
| }; |
| }; |
| }; |
| |
| &qupv3_se7_i2c { |
| status = "ok"; |
| // see -qup.dtsi for clk-freq-out setting |
| pac193x@11 { |
| compatible = "microchip,pac1934"; |
| reg = <0x11>; |
| samp-rate = <8>; |
| status = "okay"; |
| |
| // pm8150_l17 is always on in AOP |
| // avdd-supply = <&pm8150_l17>; |
| // pac193x,regulator_avdd = "avdd"; |
| |
| ch5: channel@0 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PPVAR_VPH_PWR_RF"; |
| subsys-name = "cellular"; |
| channel_enabled; |
| }; |
| |
| ch6: channel@1 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PP1700_L15A_MODEM"; |
| subsys-name = "cellular"; |
| channel_enabled; |
| }; |
| |
| ch7: channel@2 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PP800_L11A_MODEM"; |
| subsys-name = "cellular"; |
| channel_enabled; |
| }; |
| |
| ch8: channel@3 { |
| uohms-shunt-res = <10000>; |
| rail-name = "PP1200_L6A_MODEM"; |
| subsys-name = "cellular"; |
| channel_enabled; |
| }; |
| }; |
| }; |