arch/arm/mach-msm/asustek/flo/board-flo-camera.c

/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/i2c.h>
#include <linux/gpio.h>

#include <asm/mach-types.h>

#include <mach/camera2.h>
#include <mach/msm_bus_board.h>
#include <mach/gpiomux.h>

#include "devices.h"
#include "board-flo.h"

#ifdef CONFIG_MSMB_CAMERA

#define CAM1_PWDN PM8921_GPIO_PM_TO_SYS(25)
#define CAM1_RSTN PM8921_GPIO_PM_TO_SYS(31)
#define CAM_RST PM8921_GPIO_PM_TO_SYS(43)

static struct gpiomux_setting cam_settings[] = {
	{
		.func = GPIOMUX_FUNC_GPIO, /*suspend*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_DOWN,
	},
	{
		.func = GPIOMUX_FUNC_1, /*active 1*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

	{
		.func = GPIOMUX_FUNC_GPIO, /*active 2*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},
	{
		.func = GPIOMUX_FUNC_2, /*active 3*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},
};
#if 0
static struct gpiomux_setting gsbi4_suspended = {
    .func = GPIOMUX_FUNC_GPIO,
    .drv = GPIOMUX_DRV_2MA,
    .pull = GPIOMUX_PULL_KEEPER,
};


static struct gpiomux_setting gsbi4_sda_active = {
		.func = GPIOMUX_FUNC_1,
    .drv = GPIOMUX_DRV_8MA,
    .pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting gsbi4_scl_active = {
		.func = GPIOMUX_FUNC_1,
    .drv = GPIOMUX_DRV_8MA,
    .pull = GPIOMUX_PULL_NONE,
};
static struct gpiomux_setting gsbi4_sda_active = {
    .func = GPIOMUX_FUNC_9,
    .drv = GPIOMUX_DRV_8MA,
    .pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting gsbi4_scl_active = {
    .func = GPIOMUX_FUNC_A,
    .drv = GPIOMUX_DRV_8MA,
    .pull = GPIOMUX_PULL_NONE,
};
#endif

static struct msm_gpiomux_config apq8064_cam_common_configs[] = {
    {
        .gpio      = CAM1_PWDN,
        .settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
        },
    },
    {
        .gpio      = CAM1_RSTN,
        .settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
        },
    },
	{
		.gpio = CAM_RST,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 5,	//CAM_MCLK0
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[1],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 4,	//CAM_MCLK1
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		}
	},
};

#ifdef CONFIG_IMX091
static struct gpiomux_setting cam_settings[] = {
	{
		.func = GPIOMUX_FUNC_GPIO, /*suspend*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_DOWN,
	},

	{
		.func = GPIOMUX_FUNC_1, /*active 1*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

	{
		.func = GPIOMUX_FUNC_GPIO, /*active 2*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

	{
		.func = GPIOMUX_FUNC_2, /*active 3*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

	{
		.func = GPIOMUX_FUNC_5, /*active 4*/
		.drv = GPIOMUX_DRV_8MA,
		.pull = GPIOMUX_PULL_UP,
	},

	{
		.func = GPIOMUX_FUNC_6, /*active 5*/
		.drv = GPIOMUX_DRV_8MA,
		.pull = GPIOMUX_PULL_UP,
	},

	{
		.func = GPIOMUX_FUNC_2, /*active 6*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_UP,
	},

	{
		.func = GPIOMUX_FUNC_3, /*active 7*/
		.drv = GPIOMUX_DRV_8MA,
		.pull = GPIOMUX_PULL_UP,
	},

	{
		.func = GPIOMUX_FUNC_GPIO, /*i2c suspend*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_KEEPER,
	},

	{
		.func = GPIOMUX_FUNC_9, /*active 9*/
		.drv = GPIOMUX_DRV_8MA,
		.pull = GPIOMUX_PULL_NONE,
	},
	{
		.func = GPIOMUX_FUNC_A, /*active 10*/
		.drv = GPIOMUX_DRV_8MA,
		.pull = GPIOMUX_PULL_NONE,
	},
	{
		.func = GPIOMUX_FUNC_6, /*active 11*/
		.drv = GPIOMUX_DRV_8MA,
		.pull = GPIOMUX_PULL_NONE,
	},
	{
		.func = GPIOMUX_FUNC_4, /*active 12*/
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

};

static struct msm_gpiomux_config apq8064_cam_common_configs[] = {
	{
		.gpio = 1,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 2,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[12],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 3,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 4,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 5,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[1],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 34,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 107,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[2],
			[GPIOMUX_SUSPENDED] = &cam_settings[0],
		},
	},
	{
		.gpio = 10,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[9],
			[GPIOMUX_SUSPENDED] = &cam_settings[8],
		},
	},
	{
		.gpio = 11,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[10],
			[GPIOMUX_SUSPENDED] = &cam_settings[8],
		},
	},
	{
		.gpio = 12,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[11],
			[GPIOMUX_SUSPENDED] = &cam_settings[8],
		},
	},
	{
		.gpio = 13,
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[11],
			[GPIOMUX_SUSPENDED] = &cam_settings[8],
		},
	},
};


#define VFE_CAMIF_TIMER1_GPIO 3
#define VFE_CAMIF_TIMER2_GPIO 1

static struct msm_camera_sensor_flash_src msm_flash_src = {
	.flash_sr_type = MSM_CAMERA_FLASH_SRC_EXT,
	._fsrc.ext_driver_src.led_en = VFE_CAMIF_TIMER1_GPIO,
	._fsrc.ext_driver_src.led_flash_en = VFE_CAMIF_TIMER2_GPIO,
	._fsrc.ext_driver_src.flash_id = MAM_CAMERA_EXT_LED_FLASH_SC628A,
};
#endif

#ifdef NO_CAMERA2
static struct msm_bus_vectors cam_init_vectors[] = {
	{
		.src = MSM_BUS_MASTER_VFE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
	{
		.src = MSM_BUS_MASTER_VPE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
	{
		.src = MSM_BUS_MASTER_JPEG_ENC,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
};

static struct msm_bus_vectors cam_preview_vectors[] = {
	{
		.src = MSM_BUS_MASTER_VFE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 27648000,
		.ib  = 110592000,
	},
	{
		.src = MSM_BUS_MASTER_VPE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
	{
		.src = MSM_BUS_MASTER_JPEG_ENC,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
};

static struct msm_bus_vectors cam_video_vectors[] = {
	{
		.src = MSM_BUS_MASTER_VFE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 274406400,
		.ib  = 561807360,
	},
	{
		.src = MSM_BUS_MASTER_VPE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 206807040,
		.ib  = 488816640,
	},
	{
		.src = MSM_BUS_MASTER_JPEG_ENC,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
};

static struct msm_bus_vectors cam_snapshot_vectors[] = {
	{
		.src = MSM_BUS_MASTER_VFE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 274423680,
		.ib  = 1097694720,
	},
	{
		.src = MSM_BUS_MASTER_VPE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
	{
		.src = MSM_BUS_MASTER_JPEG_ENC,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 540000000,
		.ib  = 1350000000,
	},
};

static struct msm_bus_vectors cam_zsl_vectors[] = {
	{
		.src = MSM_BUS_MASTER_VFE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 302071680,
		.ib  = 1208286720,
	},
	{
		.src = MSM_BUS_MASTER_VPE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 0,
		.ib  = 0,
	},
	{
		.src = MSM_BUS_MASTER_JPEG_ENC,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 540000000,
		.ib  = 1350000000,
	},
};

static struct msm_bus_vectors cam_video_ls_vectors[] = {
	{
		.src = MSM_BUS_MASTER_VFE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 348192000,
		.ib  = 617103360,
	},
	{
		.src = MSM_BUS_MASTER_VPE,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 206807040,
		.ib  = 488816640,
	},
	{
		.src = MSM_BUS_MASTER_JPEG_ENC,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab  = 540000000,
		.ib  = 1350000000,
	},
};

static struct msm_bus_paths cam_bus_client_config[] = {
	{
		ARRAY_SIZE(cam_init_vectors),
		cam_init_vectors,
	},
	{
		ARRAY_SIZE(cam_preview_vectors),
		cam_preview_vectors,
	},
	{
		ARRAY_SIZE(cam_video_vectors),
		cam_video_vectors,
	},
	{
		ARRAY_SIZE(cam_snapshot_vectors),
		cam_snapshot_vectors,
	},
	{
		ARRAY_SIZE(cam_zsl_vectors),
		cam_zsl_vectors,
	},
	{
		ARRAY_SIZE(cam_video_ls_vectors),
		cam_video_ls_vectors,
	},
};

static struct msm_bus_scale_pdata cam_bus_client_pdata = {
		cam_bus_client_config,
		ARRAY_SIZE(cam_bus_client_config),
		.name = "msm_camera",
};

static struct msm_camera_device_platform_data msm_camera_csi_device_data[] = {
	{
		.csid_core = 0,
		.is_vpe    = 1,
		.cam_bus_scale_table = &cam_bus_client_pdata,
	},
	{
		.csid_core = 1,
		.is_vpe    = 1,
		.cam_bus_scale_table = &cam_bus_client_pdata,
	},
};
#endif

static struct gpio apq8064_back_cam_gpio[] = {
	{5, GPIOF_DIR_IN, "CAMIF_MCLK"},
	{CAM1_PWDN, GPIOF_DIR_OUT, "CAM_PWDN"},
	{CAM1_RSTN, GPIOF_DIR_OUT, "CAM_RESET"},
};

static struct msm_camera_gpio_num_info apq8064_gpio_num_info[] = {
	{
		.gpio_num = {
			[SENSOR_GPIO_STANDBY] = CAM1_PWDN,
			[SENSOR_GPIO_RESET] = CAM1_RSTN,
		}
	},
	{
		.gpio_num = {
			[SENSOR_GPIO_RESET] = CAM_RST,
		}
	},
};

static struct msm_camera_i2c_conf apq8064_back_cam_i2c_conf = {
	.use_i2c_mux = 1,
	.mux_dev = &msm8960_device_i2c_mux_gsbi4,
	.i2c_mux_mode = MODE_L,
};

static struct msm_camera_gpio_conf apq8064_back_cam_gpio_conf = {
	.gpio_no_mux = 1,
	.cam_gpio_req_tbl = apq8064_back_cam_gpio,
	.cam_gpio_req_tbl_size = ARRAY_SIZE(apq8064_back_cam_gpio),
	.gpio_num_info = &apq8064_gpio_num_info[0],
};

static struct gpio apq8064_front_cam_gpio[] = {
	{4, GPIOF_DIR_IN, "CAMIF_MCLK"},
	{CAM_RST, GPIOF_DIR_OUT, "CAM_RESET"},
};

static struct msm_camera_gpio_conf apq8064_front_cam_gpio_conf = {
	.gpio_no_mux = 1,
	.cam_gpio_req_tbl = apq8064_front_cam_gpio,
	.cam_gpio_req_tbl_size = ARRAY_SIZE(apq8064_front_cam_gpio),
	.gpio_num_info = &apq8064_gpio_num_info[1],
};

static struct camera_vreg_t apq_8064_back_cam_vreg[] = {
	{"cam_vdig", REG_LDO, 1800000, 1800000, 0},
	{"cam_vio", REG_VS, 0, 0, 0},
	{"cam_vana", REG_LDO, 2800000, 2850000, 85600},
	{"cam_vaf", REG_LDO, 2800000, 2850000, 300000},
};

static struct msm_camera_i2c_conf apq8064_front_cam_i2c_conf = {
	.use_i2c_mux = 1,
	.mux_dev = &msm8960_device_i2c_mux_gsbi4,
	.i2c_mux_mode = MODE_L,
};

#ifdef CONFIG_IMX091

static struct camera_vreg_t apq_8064_front_cam_vreg[] = {
	{"cam_vio", REG_VS, 0, 0, 0},
	{"cam_vana", REG_LDO, 2800000, 2850000, 85600},
	{"cam_vdig", REG_LDO, 1200000, 1200000, 105000},
	{"cam_vaf", REG_LDO, 2800000, 2850000, 300000},
};

#define CAML_RSTN PM8921_GPIO_PM_TO_SYS(28)
#define CAMR_RSTN 34

static struct gpio apq8064_common_cam_gpio[] = {
};

static struct gpio apq8064_back_cam_gpio[] = {
	{5, GPIOF_DIR_IN, "CAMIF_MCLK"},
	{CAML_RSTN, GPIOF_DIR_OUT, "CAM_RESET"},
};

static struct msm_gpio_set_tbl apq8064_back_cam_gpio_set_tbl[] = {
	{CAML_RSTN, GPIOF_OUT_INIT_LOW, 10000},
	{CAML_RSTN, GPIOF_OUT_INIT_HIGH, 10000},
};

static struct msm_camera_gpio_conf apq8064_back_cam_gpio_conf = {
	.cam_gpiomux_conf_tbl = apq8064_cam_2d_configs,
	.cam_gpiomux_conf_tbl_size = ARRAY_SIZE(apq8064_cam_2d_configs),
	.cam_gpio_common_tbl = apq8064_common_cam_gpio,
	.cam_gpio_common_tbl_size = ARRAY_SIZE(apq8064_common_cam_gpio),
	.cam_gpio_req_tbl = apq8064_back_cam_gpio,
	.cam_gpio_req_tbl_size = ARRAY_SIZE(apq8064_back_cam_gpio),
	.cam_gpio_set_tbl = apq8064_back_cam_gpio_set_tbl,
	.cam_gpio_set_tbl_size = ARRAY_SIZE(apq8064_back_cam_gpio_set_tbl),
};

static struct gpio apq8064_front_cam_gpio[] = {
	{4, GPIOF_DIR_IN, "CAMIF_MCLK"},
	{12, GPIOF_DIR_IN, "CAMIF_I2C_DATA"},
	{13, GPIOF_DIR_IN, "CAMIF_I2C_CLK"},
	{CAMR_RSTN, GPIOF_DIR_OUT, "CAM_RESET"},
};

static struct msm_gpio_set_tbl apq8064_front_cam_gpio_set_tbl[] = {
	{CAMR_RSTN, GPIOF_OUT_INIT_LOW, 10000},
	{CAMR_RSTN, GPIOF_OUT_INIT_HIGH, 10000},
};

static struct msm_camera_gpio_conf apq8064_front_cam_gpio_conf = {
	.cam_gpiomux_conf_tbl = apq8064_cam_2d_configs,
	.cam_gpiomux_conf_tbl_size = ARRAY_SIZE(apq8064_cam_2d_configs),
	.cam_gpio_common_tbl = apq8064_common_cam_gpio,
	.cam_gpio_common_tbl_size = ARRAY_SIZE(apq8064_common_cam_gpio),
	.cam_gpio_req_tbl = apq8064_front_cam_gpio,
	.cam_gpio_req_tbl_size = ARRAY_SIZE(apq8064_front_cam_gpio),
	.cam_gpio_set_tbl = apq8064_front_cam_gpio_set_tbl,
	.cam_gpio_set_tbl_size = ARRAY_SIZE(apq8064_front_cam_gpio_set_tbl),
};

static struct msm_camera_i2c_conf apq8064_back_cam_i2c_conf = {
	.use_i2c_mux = 1,
	.mux_dev = &msm8960_device_i2c_mux_gsbi4,
	.i2c_mux_mode = MODE_L,
};

static struct i2c_board_info msm_act_main_cam_i2c_info = {
	I2C_BOARD_INFO("msm_actuator", 0x11),
};

static struct msm_actuator_info msm_act_main_cam_0_info = {
	.board_info     = &msm_act_main_cam_i2c_info,
	.cam_name       = MSM_ACTUATOR_MAIN_CAM_0,
	.bus_id         = APQ_8064_GSBI4_QUP_I2C_BUS_ID,
	.vcm_pwd        = 0,
	.vcm_enable     = 0,
};

static struct i2c_board_info msm_act_main_cam1_i2c_info = {
	I2C_BOARD_INFO("msm_actuator", 0x18),
};

static struct msm_actuator_info msm_act_main_cam_1_info = {
	.board_info     = &msm_act_main_cam1_i2c_info,
	.cam_name       = MSM_ACTUATOR_MAIN_CAM_1,
	.bus_id         = APQ_8064_GSBI4_QUP_I2C_BUS_ID,
	.vcm_pwd        = 0,
	.vcm_enable     = 0,
};

static struct msm_camera_i2c_conf apq8064_front_cam_i2c_conf = {
	.use_i2c_mux = 1,
	.mux_dev = &msm8960_device_i2c_mux_gsbi4,
	.i2c_mux_mode = MODE_L,
};

static struct msm_camera_sensor_flash_data flash_imx074 = {
	.flash_type	= MSM_CAMERA_FLASH_LED,
	.flash_src	= &msm_flash_src
};

static struct msm_camera_csi_lane_params imx074_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0xF,
};

static struct msm_camera_sensor_platform_info sensor_board_info_imx074 = {
	.mount_angle	= 90,
	.cam_vreg = apq_8064_back_cam_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_back_cam_vreg),
	.gpio_conf = &apq8064_back_cam_gpio_conf,
	.i2c_conf = &apq8064_back_cam_i2c_conf,
	.csi_lane_params = &imx074_csi_lane_params,
};

static struct i2c_board_info imx074_eeprom_i2c_info = {
	I2C_BOARD_INFO("imx074_eeprom", 0x34 << 1),
};

static struct msm_eeprom_info imx074_eeprom_info = {
	.board_info     = &imx074_eeprom_i2c_info,
	.bus_id         = APQ_8064_GSBI4_QUP_I2C_BUS_ID,
};

static struct msm_camera_sensor_info msm_camera_sensor_imx074_data = {
	.sensor_name	= "imx074",
	.pdata	= &msm_camera_csi_device_data[0],
	.flash_data	= &flash_imx074,
	.sensor_platform_info = &sensor_board_info_imx074,
	.csi_if	= 1,
	.camera_type = BACK_CAMERA_2D,
	.sensor_type = BAYER_SENSOR,
	.actuator_info = &msm_act_main_cam_0_info,
	.eeprom_info = &imx074_eeprom_info,
};

static struct msm_camera_csi_lane_params imx091_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0xF,
};

static struct camera_vreg_t apq_8064_imx091_vreg[] = {
	{"cam_vana", REG_LDO, 2800000, 2850000, 85600},
	{"cam_vaf", REG_LDO, 2800000, 2850000, 300000},
	{"cam_vdig", REG_LDO, 1200000, 1200000, 105000},
	{"cam_vio", REG_VS, 0, 0, 0},
};

static struct msm_camera_sensor_flash_data flash_imx091 = {
	.flash_type	= MSM_CAMERA_FLASH_NONE,
};

static struct msm_camera_sensor_platform_info sensor_board_info_imx091 = {
	.mount_angle	= 0,
	.cam_vreg = apq_8064_imx091_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_imx091_vreg),
	.gpio_conf = &apq8064_back_cam_gpio_conf,
	.i2c_conf = &apq8064_back_cam_i2c_conf,
	.csi_lane_params = &imx091_csi_lane_params,
};

static struct i2c_board_info imx091_eeprom_i2c_info = {
	I2C_BOARD_INFO("imx091_eeprom", 0x21),
};

static struct msm_eeprom_info imx091_eeprom_info = {
	.board_info     = &imx091_eeprom_i2c_info,
	.bus_id         = APQ_8064_GSBI4_QUP_I2C_BUS_ID,
};

static struct msm_camera_sensor_info msm_camera_sensor_imx091_data = {
	.sensor_name	= "imx091",
	.pdata	= &msm_camera_csi_device_data[0],
	.flash_data	= &flash_imx091,
	.sensor_platform_info = &sensor_board_info_imx091,
	.csi_if	= 1,
	.camera_type = BACK_CAMERA_2D,
	.sensor_type = BAYER_SENSOR,
	.actuator_info = &msm_act_main_cam_1_info,
	.eeprom_info = &imx091_eeprom_info,
};

static struct camera_vreg_t apq_8064_s5k3l1yx_vreg[] = {
	{"cam_vdig", REG_LDO, 1200000, 1200000, 105000},
	{"cam_vana", REG_LDO, 2800000, 2850000, 85600},
	{"cam_vio", REG_VS, 0, 0, 0},
	{"cam_vaf", REG_LDO, 2800000, 2850000, 300000},
};

static struct msm_camera_sensor_flash_data flash_s5k3l1yx = {
	.flash_type	= MSM_CAMERA_FLASH_NONE,
};

static struct msm_camera_csi_lane_params s5k3l1yx_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0xF,
};

static struct msm_camera_sensor_platform_info sensor_board_info_s5k3l1yx = {
	.mount_angle	= 90,
	.cam_vreg = apq_8064_s5k3l1yx_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_s5k3l1yx_vreg),
	.gpio_conf = &apq8064_back_cam_gpio_conf,
	.i2c_conf = &apq8064_back_cam_i2c_conf,
	.csi_lane_params = &s5k3l1yx_csi_lane_params,
};

static struct msm_camera_sensor_info msm_camera_sensor_s5k3l1yx_data = {
	.sensor_name	= "s5k3l1yx",
	.pdata	= &msm_camera_csi_device_data[0],
	.flash_data	= &flash_s5k3l1yx,
	.sensor_platform_info = &sensor_board_info_s5k3l1yx,
	.csi_if	= 1,
	.camera_type = BACK_CAMERA_2D,
	.sensor_type = BAYER_SENSOR,
};

static struct camera_vreg_t apq_8064_mt9m114_vreg[] = {
	{"cam_vio", REG_VS, 0, 0, 0},
	{"cam_vdig", REG_LDO, 1200000, 1200000, 105000},
	{"cam_vana", REG_LDO, 2800000, 2850000, 85600},
	{"cam_vaf", REG_LDO, 2800000, 2850000, 300000},
};

static struct msm_camera_sensor_flash_data flash_mt9m114 = {
	.flash_type = MSM_CAMERA_FLASH_NONE
};

static struct msm_camera_csi_lane_params mt9m114_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0x1,
};

static struct msm_camera_sensor_platform_info sensor_board_info_mt9m114 = {
	.mount_angle = 90,
	.cam_vreg = apq_8064_mt9m114_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_mt9m114_vreg),
	.gpio_conf = &apq8064_front_cam_gpio_conf,
	.i2c_conf = &apq8064_front_cam_i2c_conf,
	.csi_lane_params = &mt9m114_csi_lane_params,
};

static struct msm_camera_sensor_info msm_camera_sensor_mt9m114_data = {
	.sensor_name = "mt9m114",
	.pdata = &msm_camera_csi_device_data[1],
	.flash_data = &flash_mt9m114,
	.sensor_platform_info = &sensor_board_info_mt9m114,
	.csi_if = 1,
	.camera_type = FRONT_CAMERA_2D,
	.sensor_type = YUV_SENSOR,
};

static struct msm_camera_sensor_flash_data flash_ov2720 = {
	.flash_type	= MSM_CAMERA_FLASH_NONE,
};

static struct msm_camera_csi_lane_params ov2720_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0x3,
};

static struct msm_camera_sensor_platform_info sensor_board_info_ov2720 = {
	.mount_angle	= 0,
	.cam_vreg = apq_8064_front_cam_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_front_cam_vreg),
	.gpio_conf = &apq8064_front_cam_gpio_conf,
	.i2c_conf = &apq8064_front_cam_i2c_conf,
	.csi_lane_params = &ov2720_csi_lane_params,
};

static struct msm_camera_sensor_info msm_camera_sensor_ov2720_data = {
	.sensor_name	= "ov2720",
	.pdata	= &msm_camera_csi_device_data[1],
	.flash_data	= &flash_ov2720,
	.sensor_platform_info = &sensor_board_info_ov2720,
	.csi_if	= 1,
	.camera_type = FRONT_CAMERA_2D,
	.sensor_type = BAYER_SENSOR,
};
#endif

static struct msm_camera_csi_lane_params ov5693_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0x3,
};

static struct i2c_board_info msm_act_main_cam5_i2c_info = {
	I2C_BOARD_INFO("msm_actuator", 0x11),
};

static struct msm_actuator_info msm_act_main_cam_5_info = {
	.board_info     = &msm_act_main_cam5_i2c_info,
	.cam_name       = MSM_ACTUATOR_MAIN_CAM_5,
	.bus_id         = APQ_8064_GSBI4_QUP_I2C_BUS_ID,
	.vcm_pwd        = 0,
	.vcm_enable     = 0,
};

static struct msm_camera_slave_info ov5693_slave_info = {
	.sensor_slave_addr = 0x20,
	.sensor_id_reg_addr = 0x300A,
	.sensor_id = 0x5690,
};

static struct msm_sensor_info_t ov5693_sensor_info = {
	.subdev_id = {
		[SUB_MODULE_SENSOR] = -1,
		[SUB_MODULE_CHROMATIX] = -1,
		[SUB_MODULE_ACTUATOR] = 5,
		[SUB_MODULE_EEPROM] = -1,
		[SUB_MODULE_LED_FLASH] = -1,
		[SUB_MODULE_STROBE_FLASH] = -1,
		[SUB_MODULE_CSIPHY] = 0,
		[SUB_MODULE_CSIPHY_3D] = -1,
		[SUB_MODULE_CSID] = 0,
		[SUB_MODULE_CSID_3D] = -1,
	}
};

static struct msm_sensor_init_params ov5693_init_params = {
	.modes_supported = CAMERA_MODE_2D_B,
	.position = BACK_CAMERA_B,
	.sensor_mount_angle = 90,
};

static struct msm_camera_sensor_board_info msm_camera_sensor_ov5693_data = {
	.sensor_name	= "ov5693",
	.slave_info = &ov5693_slave_info,
	.csi_lane_params = &ov5693_csi_lane_params,
	.cam_vreg = apq_8064_back_cam_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_back_cam_vreg),
	.gpio_conf = &apq8064_back_cam_gpio_conf,
	.sensor_info = &ov5693_sensor_info,
	.sensor_init_params = &ov5693_init_params,
	.actuator_info = &msm_act_main_cam_5_info,
	.i2c_conf = &apq8064_back_cam_i2c_conf,
};

static struct camera_vreg_t apq_8064_mi1040_vreg[] = {
	{"cam_vdig", REG_LDO, 1800000, 1800000, 150000},
	{"cam_vio", REG_VS, 0, 0, 0},
	{"cam_vana", REG_LDO, 2800000, 2800000, 85600},
};

static struct msm_camera_csi_lane_params mi1040_csi_lane_params = {
	.csi_lane_assign = 0xE4,
	.csi_lane_mask = 0x1,
};

static struct msm_camera_slave_info mi1040_slave_info = {
	.sensor_slave_addr = 0x90,	/* it needs 8-bits */
	.sensor_id_reg_addr = 0x0,
	.sensor_id = 0x2481,
};

static struct msm_sensor_info_t mi1040_sensor_info = {
	.subdev_id = {
		[SUB_MODULE_SENSOR] = -1,
		[SUB_MODULE_CHROMATIX] = -1,
		[SUB_MODULE_ACTUATOR] = -1,
		[SUB_MODULE_EEPROM] = -1,
		[SUB_MODULE_LED_FLASH] = -1,
		[SUB_MODULE_STROBE_FLASH] = -1,
		[SUB_MODULE_CSIPHY] = 1,
		[SUB_MODULE_CSIPHY_3D] = -1,
		[SUB_MODULE_CSID] = 1,
		[SUB_MODULE_CSID_3D] = -1,
	}
};

static struct msm_sensor_init_params mi1040_init_params = {
	.modes_supported = CAMERA_MODE_2D_B,
	.position = FRONT_CAMERA_B,
	.sensor_mount_angle = 270,
};
static struct msm_camera_sensor_board_info
	msm_camera_sensor_board_mi1040_data = {
	.sensor_name = "mi1040",
	.slave_info = &mi1040_slave_info,
	.csi_lane_params = &mi1040_csi_lane_params,
	.cam_vreg = apq_8064_mi1040_vreg,
	.num_vreg = ARRAY_SIZE(apq_8064_mi1040_vreg),
	.gpio_conf = &apq8064_front_cam_gpio_conf,
	.sensor_info = &mi1040_sensor_info,
	.sensor_init_params = &mi1040_init_params,
	.i2c_conf = &apq8064_front_cam_i2c_conf,
};

static struct platform_device msm_camera_server = {
	.name = "msm",
	.id = 0,
};

void __init apq8064_init_cam(void)
{

#ifdef CONFIG_IMX091
	msm_gpiomux_install(apq8064_cam_common_configs,
			ARRAY_SIZE(apq8064_cam_common_configs));

	if (machine_is_apq8064_cdp()) {
		sensor_board_info_imx074.mount_angle = 0;
		sensor_board_info_mt9m114.mount_angle = 0;
	} else if (machine_is_apq8064_liquid())
		sensor_board_info_imx074.mount_angle = 180;
#endif

	msm_gpiomux_install(apq8064_cam_common_configs,
			ARRAY_SIZE(apq8064_cam_common_configs));

	platform_device_register(&msm_camera_server);
	platform_device_register(&msm8960_device_i2c_mux_gsbi4);
	platform_device_register(&msm8960_device_csiphy0);
	platform_device_register(&msm8960_device_csiphy1);
	platform_device_register(&msm8960_device_csid0);
	platform_device_register(&msm8960_device_csid1);
	platform_device_register(&msm8960_device_ispif);
	platform_device_register(&msm8960_device_vfe);
	platform_device_register(&msm8960_device_vpe);
}

#ifdef CONFIG_I2C
static struct i2c_board_info apq8064_camera_i2c_boardinfo[] = {
#ifdef CONFIG_IMX091
	{
	I2C_BOARD_INFO("imx074", 0x1A),
	.platform_data = &msm_camera_sensor_imx074_data,
	},
	{
	I2C_BOARD_INFO("mt9m114", 0x48),
	.platform_data = &msm_camera_sensor_mt9m114_data,
	},
	{
	I2C_BOARD_INFO("ov2720", 0x6C),
	.platform_data = &msm_camera_sensor_ov2720_data,
	},
	{
	I2C_BOARD_INFO("sc628a", 0x6E),
	},
	{
	I2C_BOARD_INFO("imx091", 0x34),
	.platform_data = &msm_camera_sensor_imx091_data,
	},
	{
	I2C_BOARD_INFO("s5k3l1yx", 0x20),
	.platform_data = &msm_camera_sensor_s5k3l1yx_data,
	},
#endif
	{
	I2C_BOARD_INFO("ov5693", 0x20 << 1),
	.platform_data = &msm_camera_sensor_ov5693_data,
	},
	{
	I2C_BOARD_INFO("msm_actuator", 0x11),
	.platform_data = &msm_act_main_cam_5_info,
	},
	{
	I2C_BOARD_INFO("mi1040", 0x48),
	.platform_data = &msm_camera_sensor_board_mi1040_data,
	},
};

struct msm_camera_board_info apq8064_camera_board_info = {
	.board_info = apq8064_camera_i2c_boardinfo,
	.num_i2c_board_info = ARRAY_SIZE(apq8064_camera_i2c_boardinfo),
};
#endif
#endif